Construction of Building Less Boys Primary School Udroo

Clearance of site by way of removing garbage humps extracting of bushes by mechanical/ manual means including removal of same from site to out side municipal limits with roots making site workable for laying of layout for proposed building.

Earth work in excavation over areas (Exceeding 30cm in depth 1.5m in width) including disposal of excavated earth to be leveled and neatly dressed up to a lead of 50m in all kinds of soil Including dewatering complete job.

Providing and laying of soling stone size over 150mm on level (hand packed) watering ramming complete under raft and flooring..

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level. M-7.5 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate) 40mm nominal size crushed in foundation and under flooring.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – all works upto plinth level: M-15 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 40 mm nominal size crushed ) .

Providing and laying in position specified grade of Reinforced cement concrete M20 (1:1.5:3, ) excluding the cost of centering, shuttering, finishing and reinforcement.All works upto plinth lvl including carriage complete.

Providing and laying in position specified grade of Reinforced cement concrete M20 (1:1.5:3, ) excluding the cost of centering, shuttering, finishing and reinforcement.All works above plinth including carriage complete.

Centering and shuttering including strutting, propping etc. and removal of form work (Kitply shuttering) for:-

Foundation ,footings,bases of columns

suspended floors, beams,lintels[first slab]

Stairs (excluding landings) except spiral staircases.

Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Columns, pillars, piers, abutments, posts and struts.

Reinforcement for RCC works including straightening, cutting, bending, binding & placing in position all complete. HYSD reinforcement of grade Fe-500D steel bars at all levels.

Filling GSB filling under flooring in layers not exceeding 20 cm in depth consolidating each layer by rammng, watering.

Structural steel work welded in built up section for trusses and framed work including cutting hoisting, fixing in position anchor bolts and applying a primer coat of approved steel primer.

Brick work with common burnt clay (non modular) bricks claas designation 75 in in superstructure above plinth level upto floor five level including curing in 1:6 cement mortar.(GROUND FLOOR)

12mm thick internal cement plaster 1:4 (1 Cement:4 fine sand) on all surfaces (walls, ceiling and RCC surfaces) after proper combing including cost of all material & curing.

12mm thick external cement plaster 1:4 (1 Cement:4 fine sand) on all surfaces (walls and RCC surfaces) after proper combing including cost of all material, skyfoulding & curing.

Proving and laying 50mm cement cone. Flooring 1:2:4 ( 1 cement 2 coarse sand: 4 hard stone ballast 20 mm & down gauge)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 16 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. and including edge moulding single complete job.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position andapplying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete,Hot finished welded type tubes.

Providing and fixing imported kd wood work in frames of doors, window, clerestory windows and other frames, wrought framed and fixed in position.

Proving and fixing imported kd wood glazed shutters for windows and clerestory windows using 10kg/sqm (4mm thk) glass panes including ISI mark bright finished butt hinges with necessary screws (30mm thk)

Providing & fixing 30mm thk ISI marked Flush door shutters non decorative type solid core of block board construction with frame of first class hard wood all around, 20mm thick & well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces including bright finished ISI marked butt hinges with necessary screws ,complete job.

Supply of Hardware Fittings For Doors & Windows

P&F 40X5 mm flat iron hold fast 40 cm long

P&F approved quality Aluminium handles 125mm

P&F approved quality Aluminium tower bolt 100x10mm

P&F approved quality Aluminium tower bolt300x10mm

P&F approved quality Aluminum hanging door stoppers 125mm

P&F approved quality bright finished brass 100mm mortise latch and lock

P&F approved qulaity 125mm oxdiized MS windows stays

P&F glass 4mm thickness as per specification with first deodar beading up to size 40x20mm in wooden frames and painting as per specifications.

Providing colour coated Hi- Rib sheet roofing 0.50mm thick including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing ridges or hips of width 60cm overall width color coated sheet 0.63mm thick fixed with polymer coated J or L hooks, bolts and nuts complete

Providing and fixing valleys of 90cm width overall in color coated sheets 0.63mm thick fixed with polymer coated J or L hooks bolts and nuts complete

Providing and applying cement based Wall Primer (ready made) of approved manufacturers Two or more coats on new work to preparethe surface for painting.

Distempering with 1st quality acrylic distemper (ready made) of approved manufacturers and of required shade and color complete. Two or more coats on new work excluding priming coat over POP surface.

Applying priming coat on new wood and wood based surface with ready mixed wood primer

Painting with synthetic enamel paint of approved brand and manufacture of required shade and colour to give smooth finish with two or more coats on new wood and based surfaces.

Providing /fixing 25 mm dia contute pipes for electric fittingsincludng embedding all

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4)

Providing and fixing white vitreous china laboratory sink with long nose Sink cock , C.P. brass chain with rubber plug, 40mm C.P. brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the walls wherever required: Size 600x450x200 mm

Providing and fixing 100mm diameter PVC pipes and fittings laid in the required gradient, including all fixing accessories, as directed by the Engineer-in-Charge (EIC).

Carriage of materails By Mech.Transport, from source to site of work

Stone agg. for an avg lead.

Sand for an avg lead.

Bricks for an avg lead.