Providing and fixing wall and floor Tiles in bathroom at first floor of E-in-C Office, Cantt Road, Lucknow

Amount

Dismantling stone slab flooring laid in cement mortar includingvstacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigmentsetc. complete. size of tile 600x600mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

P/F Wash basin with single hole/number of holes for pillar tap with C.I. or M.S brackets painted white including cutting hole & making good the same but exluding fittings.(a) 550x400mm

Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. a) 15mm nominal bore

P/F 15 mm Nominal hole size C.P. Pillar cock

P/F Indian type white glazed earten ware 1st quality ISI marked W.C. pan size 580mm size Indian make of approved quality including cost of materials.

P/F looking mirror of 900×450 mm size of approved make with teak wood moulded frame and 6mm thick hard board backing including cost of material ,labour and T&P etc.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

M/S MOHD JAVED