Different type of work (package no.07/22-23 and 03, 04, 05/23-24) against Deposite Scheme 2022-23 and 2023-24 in the area of Alambagh under jurisdiction of E.E., EUDD-Alambagh, LESA, Lucknow

Amount

Safe Loading, Carriage & unloading of following Materials from Centre Store to Pit Site/J.E. Dump Store.

(a) Line material

(b) ST Pole 11 Mtr. Long

(c) TF 25 KVA

(d) TF 100 KVA

(e) TF 250 Kva

(f) 11 KV Pin insulator with GI Pin

(g) 11 KV 3x70 sq.mm XLPE cable

(h) 11 KV 3x70 sq.mm OD Jointing Kit

(i) 11 KV 3x70 sq.mm ST Jointing Kti

(j) 11 KV TPMO Set

(k) Earthing Set complete

(l) 11 KV Fuse Set

(m) ASCR Weasel Conductor

Dragging of ST/PCC Pole digging of pit erection of sub-station type double pole structure on ST/PCC Pole with fixing of necessary item such as Top Channel, along with grouting (As per RESPO Norms) Dropper Channel, 11 pin insulator with Pin & 11 KV Disc Insulator with fitting, DO Fuse set its ramming, as per RESPO Specification. Only Pole and insulator will be Provided by the Department.

Ordinary earthing by 11 KV MS earth Rod 2500mm long as per RESPO Schedule. All material except earthing wire shall be supplied by the contractor.

Well type earthing of with 60 Fit Deep borring and providing GI Pipe 1.5" dia ("B" Class) and earthing must be joint by G.I. Strip of 32x5 mm thick long attached with nut & bolts and GI pipe cap. All material and labour shall be supplied the contractor.

Construction of T/F plinth of size 2x2x1.2 mtr with the help first class brick & masonary in the ratio 1:4 cement & sand coarse. Filling the structure completely per norms with RCC to 1:2:2 cement & stone grit with MS bar and MS channel for resting transformer.

Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I.

Construction of masonry/metallic type distribution pillar of size 1x1.5x2.5 mtr. with supply & fixing of fabricated 4 nos. doors (2ft.x4ft.) made of BP sheet of 18 SWG with locking arrangement, 2 Nos. Straight MS angle 50x50x6mm (1800 mm long) 2 nos. 500 Amp, 3 Nos. 300 Amp Henley Type Tailless Fuse Unit, 3 Nos copper bus bar of size 1000x50x6 mm and one No. Alum busbar 1000x50x6 mm including all civil material required for work. All material shall be supplied by contractor.

Laying of 3X70 sq.mm 11 KV XLPE cable by drill method as per RESPO Norms. Only 11 KV XLPE cable supplied by Department.

Cable Hosting of 11 KV 3x70 sq. mm XLPE Cable at the following including jumpering etc complete with help of GI Pipe as Per RESPO Norms. GI pipe and other required material shall be supplied by contractor.

High pressure testing of 11 KV 3x70 XLPE cash along with arrangement of High Pressure equipment.

Laying Stringing & sagging of 11 KV New Line on ACSR Weasel conductor as per RESPO Specification and direction on E/I. All material except ACSR weasel conductor shall be supplied by the contractor.

Fixing of 11 KV TMPO as per RESPO Norms. TMPO

Supply and fixing of 11 KV DO fuse set as per RESPO Norms.

Fabrication, errection & commissioning of 25 KVA T/F on DP with all accessories. All material except 25 KVA T/F shall be supplied by the Contractor.

Fabrication, errection & commissioning of 100 KVA T/F on DP with all accessories. All material except 100 KVA T/F shall be supplied by the Contractor.

Fabrication, errection & commissioning of 250 KVA T/F on Plinth with all accessories. All material except 250 KVA T/F shall be supplied by the Contractor.

GST Extra as per rules

Sidhi Enterprises

M/S R P ENTERPRISES