Renovation, Furnishing and Civil Allied Work Of Lok Shikshan Sanchanalaya and IASE Institute Bhopal (M.P.)

Amount

Providing and fixing of veneer/laminates finish computer Running table(customized as per side condition or Instruction of Architect) have top 20-25mm thick after finish &600 mm deep table top made by 19mm thick BWP ISI grade plywood, storage by using 25mm thick plywood for top and 18mm thick plywood for all other horizontal and vertical members. Telescopic cpu stand/modular keyboard tray shall be provided of approved model and make. The table top fixed on the 300mm deep and 725 mm high veneer/ laminate finish wooden cabinet made by 19mm BWP plywood. Cabin ate shall have vertical members of 19mm thick BWP plywood at intervals of 900 mm c/c or as per instruction. Table shall have inner lining of approved color 1.00mm thick decorative laminate. Table shall have provision for cable manager & raceway to accommodate wires for pa system networking, electrical etc. .Side of the table top shall be finish with acrylic solid surface & veneer/Laminated as per approved. All wooden & veneer surface shall be duly melamine polished finish (If reqd)/table should be measured in running length only from one side. All work shall be carried out as per instruction of architect all plywood used in BWP only, veneer/laminate make: century/orchid plywood.( furniture Greengard/bifma certified

Providing and placing of MID back revolving chair for Computer Chair type bio synchronic with fixed arm, ergonomic seat design, backrest made up two piece injection molded frame backrest symmetrical lumber support with material of aluminum die cast with ABS/nylon pu foam covered with mesh fabric 220 gram GSM thickness of fabric 5% (gram/sam) with a warranty period of 1 year product must be approved before supply.

Supplying and fixing of Delegate chair of size 560 x 590 x900mm and seat size 510x440x450(lxbxh) 4 ledge structure made out of I ST teak wood finished with melamine polish, Chair having standard arm seat base with XPU 40mm foam cover with interior match color fabric and seat back same. The rate are inclusive of all hardware tools and machinery including leads lift and necessary to complete the item in good condition nothing shall be paid extra separately unless specified.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/ kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N(Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge

Supplying and fixing 6 mm thickness polished Mirror glass fixed on wall with SS 35X5mm bolt and Mirror glass all edge finish curved shaped, With Polished work complete as per instruction of Eng. in charge

Supplying and installation automatic stainless steel Body 3600 wt hand dryer Ac 220-240 hot/cold waves auto cut off within 60 sec and 4500 RPM speed, waterproof product With touch free infra-red activation wall mounted.

Providing and laying multi charge Full body matt finished vitrified Floor/wall tiles of sizes having water absorption less than 0.05% and conforming to is: 15622 of make :-Rak Nitco premium quality laid on 20mm the base of cement mortar 1:4 (1cement” 4 Sand) in all shapes and design including epoxy resins matching combined with a filler power grouting the joint work complete as per direction of eng in charge. Tile size (600mmx1200mm) Make- RAK/NITCO/SIMPOLO.

Providing and fixing Aluminium Composite Panel glazing work in elevation, Glazing work made by (25 mm x 50 mm) ISI tubular pipe (Pipe Painted with two Coat of Steel Primer) frame fixed in wall at 600mm c/c, frame work cover with ACP sheet (ACP sheet color to be Decided by Eng.-in-charge)finally finish with 5.00 mm float glass panels (If Req.) Work complete all labour material ,hardware and scaffolding .

Wooden carving Artistic work, wooden caring work applying solid wood BWP 18mm ply, mdf board ,door frames, windows all work based on education thematic, work complete the instruction of designer 7 Eng. in charge ( Material paid separately)

Stone carving Artistic work ,carving work applying Dholpur stone, red stone, AAC ,CLC block all work based on education thematic, work complete as per instruction of designer & Eng. in charge( ( Material paid separately)

Providing and laying of Digital printing based on various aspects of education thematic, With frame of seasoned teak wood/Fiber canvas made on good quality fabric, Work complete as per instruction of architect

Providing and fixing for base frame work for partition /paneling on wall column or beam etc. by using teak, Sal wood,19 mm laminated board, frame work using two face finished 75mmx75mm section and 400 mm c/c grid work i/c extra member at skirting level frame shall be treated with 5.0% dilute anti termite emulsion sprayed with &the frame shall work shall be fixed to wall and finally cover with 12mm thk 100 % BWP ply wood all exposed surface cover with 1.00mm thk wooden laminated/Pvc laminate (if req.) or instruction of architect, work complete all labour material wastage etc. scaffolding and as per instruction of architect/Eng. in charge. Plywood century, green ply, duro, orchid or equivalent make

Providing and fixing of approved quality wallpaper with approved graphics and folder (as per architect) and pasted on the panels &partition on surface prepared with putty with required adhesive on the surface (the rate does not include surface preparation) basic rate of wall paper is RS 105 to 120 per sqft.The item in good condition nothing shall be paid extra separately unless specified

Providing and fixing in position imported carpet/PVC Flanks of approved shade and brand 400 GSM PILE WT, Gross WT 1000 gms Graphic loop pile having thickness 2 mm-4mm with primary backing of polypropylene woven sect and secondary action back complete as per instruction, specifications and as per the direction of Eng. in charge, carpet and underlay to be installed with standard fevicol/Dunlop adhesive. The flooring to be installed agency or as approved with eighteen month warranty from principal from any manufacturing defects. The installation to be in line and level including the cost of all material, disposal of debris etc., Complete to the satisfaction of Eng. in charge Basic rate of carpet –RS 125 PER SQ make unitex or equivalent.(Sample Planks/Carpet approved before supply)

Conference Table:- Providing and fixing of veneer/ Laminated finish conference table have top 30-35mm thick after finish &600 mm deep table top made by 19mm thick BWP ISI Grade plywood, the table top fixed on the 300mm deep and 725 mm high veneer/Laminated finish wooden Vertical Member made by 19mm BWP plywood. Cabinet shall have vertical members of 19mm thk BWP plywood at intervals of 900 mm c/c or as per instruction. Table shall have inner lining of approved colour 1.00mm thk decorative laminate. Table shall have provision for cable manager &raceway to accommodate wires for PA System networking ,electrical etc (Material Paid Separately) .Side of the table top shall be finish with acrylic solid surface& veneer/Laminated as per approved. All wooden & veneer surface shall be duly melamine polished finish/Table (If req.) should be measured in running length only from one side. All work shall be carried out as per instruction of Architect Veneer/laminate make: century/Archid plywood.( furniture Green guard/Bifma certified co)

Chairmen Chair (high back) Supplying and installing high back chair model mint-1 ergonomically designed for contoured lumber support for extra comfort having seat made up of insert molded polyurethane foam of density 75 +/- 4 kg/m3 upholstered with foam laminated mesh fabric assembled over plastic seat cover the back made up of two pieces injection molded frame with the inner frame upholstered with mesh fabric and mounted on the main assembly ,the armrest top made up of injection molded polyurethane and mounted on the injection molded height adjustable type armrest with height adjustable up to 45+-5mm synchronized pivot mechanism of 360 degree revolving type and having tilt with 3 position locking anti shock feature pneumatic height adjustment of 90 mm neck rest assembly mounted on top of back made up of polyurethane foam upholstered with foam laminated mesh fabric and having vertical adjustment up to 45mm &angular adjustment of 30 degrees ,the pedestal made up of die cast aluminum filled with 5 no twin wheel castors which ar injection molded in back pp all complete as per manufacture specification and direction of Eng. in charge. (sample chair approved before supply)

Providing and fixing of godrej /herman miller/haworth or equivalent make Delegate chair pch 9u01r, , the seat and back are made up of 1.2+0.1cm. Thick hot pressed plywood measured as per qa method described in ocpqlta-p14-18 and upholstered with fabric and molded pu form together with molded seat and back covers-b. The back is designed with contoured lumber support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area, the high back size is 47cm w x 60 cm h and seat size is 47 cm w x 48cm d.The hr pu foam is molded with density 45 +-2kg/m cube and hardness load 16+2kgf as per is":7888 of 25% compression. The one piece armrest are injection molded from black co-polymer pp .Centre tilt syncro mechanism has 360 degree revolving type, upright position locking tilt tension adjustment, seat/ back ratio of 1:3. The pneumatic height adjustment has an adjustment stroke of 12 +- 0.3 cm. Telescopic bellow assy: it is 3 pc telescopic type and injection molded in black pp. The pedestal is injection molded in black 33% glass filled nylon 66 and fitted with nos. Twin wheel casters. The pedestal is 66.3 +- 0.5 cm. Pitch dia (76.3 +- cm with castors). sample chair approved before supply)

Supplying and installation of 86” interactive flat panel ,3840x2160 infrared Technology,i5/8GBRAM/256 SDD Hard disk with video conferencing through UHD camera, Interactive whiteboard, MS office professional &windows 10 professional, With 3600D PTZ camera inbuilt 01) HDMI Splitter 02) HDMI high speed cable(15 Meter) 03) PTZ Video Conferencing Camera (1 Nos) 04) CO-AXIAL CABLE (15 Meter) Make- VIewSonic/Samsung/LG/

Supplying, Testing & commissioning of AHUJA CMD 4200 Delegate unit

Supplying, Testing & commissioning of AHUJA CMC-4100 Chairman Unit

Supplying and Installation Celling Mount Speaker AHUJA 5061 T

Supplying Logitech Keyboard K400 Plus Touch Wireless Inbuilt Mouse.

Curved MDF Paneling:-Providing &fabricating paneling on Existing curved wooden frame work The frame work shall be clad with 6+6 mm thick flexi ply &4mm thick MDF finished with approved color Duco paint, complete as per thr detailed or instruction of the Eng.-in charge

Three track Three panels sliding windows with SS Fly Proof Mesh made of frame 95x50mm &sash 38x66 mm both having wall thickness of 2.3+-0.2 mm and single glazing bead/double glazing bead of appropriate dimension (Are of windows above 1.50 Sqm to up to 3.5 sqm)

Door Paneling :- Providing & fixing for paneling on walls /column /beam etc. by using dimensionally stable and wrap free BWP plywood/blackboard/MDF(IF Req) sheet work shall be fixed to base in straight ling and proper plumb using screw used in wall should properly fixed with M seal compound and rawl plug.Finally all exposed surface finished with 1.00 laminates/The job shall be included all material labour wastage ect complete plywood marine grade IS 710,work complete as per instruction of architect. (Plywood century, greenply, duro, archid or equivalent make)

Acoustic sound proof door and fixing 50-75mm thick acoustic sound proof door made out of teak wood door frame size of 75mmx125mm with 9mm BWP grade Ply on both side with 4mm thick on both side with 50mm insulation pad fill up in air up with ect

Providing and fixing decorative laminate as per IS With marine grade PVC Glue (fevicol) applied @0.45 kg per sqm to partition ,paneling roof beam or similar places as directed in design and pattern having pin groove. a) 1.00mm thk plain gloss satin finish Note:- The Bidder Shall quote his own rates for item rates.

Bidder Name

Amount

BHAWSAR CONSTRUCTION COMPANY(GSTN-23AGRPB4583E1ZH)