Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Not Admitted-Fee/PreQual/Technical 75 J N ROAD HADDO PORT BLAIR SOUTH ANDAMAN PORT BLAIR 744102 | PORT BLAIR | SOUTH ANDAMAN | ANDAMAN AND NICOBAR ISLANDS | 744102 | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
Refer Docs
EMD Value
₹78,149
Closing Date
21 Dec 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EEZPSA
Executive Engineer Zilla Parishad South Andaman Port Blair
Additional alteration repair and maintenance of existing RCC double storied guest house at zilla niwas campus under zilla parishad south andaman
2023_OEEPB_12648_1
EE/ZP/SA/2023-2024/56
Open Tender
Civil Works - Buildings
Works
240 days
port blair
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹78,149
Yes
22 Dec 2023
13 Dec 2023
22 Dec 2023
13 Dec 2023
21 Dec 2023
13 Dec 2023
Amount
Distemperingwith 1 st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade :
Old work (one or more coats )
Finishing walls with Acrylic Smooth exterior paint of required shade :
Old work (One or more coats applied @ 0.90 ltr/10 sqm).
Varnishing with varnish of approved brand and manufacture :
One or more coats with copal varnish.
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws. Etc. complete.
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer ( having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700mm), with necessary accessories and screws etc. complete.
Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
Circular shape 450 mm dia
Rectangular shape 1500 x 450 mm
Providing and fixing C.P brass bib cock of approved quality conforming to IS:8931:
15 mm nominal bore
Providing and fixing C.P brass stop cock (Concealed) of standard design and of approved make conforming to IS :8931.
15 mm nominal bore
Providing and fixing C. P brass angle valve for basin mixer and geyser points of approved quality conforming to IS : 8931
15 mm nominal bore
Providing and fixing PTMT grating of approved quality and colour. Circular type
100 mm nominal dia
Providing and fixing toilet paper holder:
C.P. brass
Providing and fixing C.P brass shower rose with 15 of 20 mm inlet :
100 mm diameter
Providing and fixing CP Brass single lever telephonic wall mixer of quality & make as approved by Engineer in charge.
15 mm nominal dia
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings aggangement of approved quality and colour.
450 mm long towel rail with total length of 495 mm , 78 mm wide and effective height of 88 mm weighing not less than 170 gms.
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long,200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighting not less than 88 gms.
Providing and fixing PTMT soap dish holder having length of 138 mm, breadth 102 mm height of 75m with concealed fitting arrangements, weighting not less than 106 gms.
Providing and fixing brass two in one bib cock of approved quality:
15mm nominal bore
Providing and fixing CP Brass haelth faucet of quality & make as approved by Engineer in charge
15 mm nominal dia
Dismanting tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.
For thickness of tiles 10 mm to 25 mm
Dismanting roofing including ridges, hips, valleys and gutters etc and stacking the material within 50 metres lead of :
G.S Sheet
Dismanting doors, windows and clerestory windows ( steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
Of area 3 sqm. Metres and below.
Dismantling aluminium/ Gypwum partitions, doors, windows, fixed glazing and false celing including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer- in- charge.
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles. Including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand ).
Ordinary cement without any pigment.
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer- in-charge) 0.50 mm (+ 0.05 % ) total coated thickness with zinc coating 120 grams per sqm as per IS : 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyster top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in - charge. The sheet shall be fixed using self drilling/self tapping screws of size ( 5.5 x55 mm ) with EPEM seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, ratters and trusses and including cutting to size and shape wherever required.
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS :277, in 240 mpa steel grade, 5 7 icrons epoxy primer on both side of the sheet and polyester top coat 15- 18 microns using self drilling/self tapping screws complete :
Ridges plan (500 - 600 mm )
Providing and fixing in position wood plastic compsoite board as E- board of 18 mm thickness with necessary rews, nails, etc. complete as perthe direction of Engineer - in- charge.
Poviding and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctionss, i.e at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherver required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer - in charge. ( Glazing, paneling and dash fasteners to be paid for separately ):
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherver required including the cost of EPDM rubber/ neoprene gasket required ( Fittings shall be paid for separately)
Anodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC15 )
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer of graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P brass / stainless steel screws etc. complete as [er architectural drawings and directions of engineer in - charge.
Pre- laminated particle board with decorative lamination on one side and balancing lamination on other side.
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer - in -charge . ( Cost of aluminium snap beading shall be paid in basic item):
With float glass panes of 4.0 mm thickness ( weight not less than 10 kg/ sqm ).
Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron ) consisting of tee/ angles sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless stekk sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjisting hangers 6 mm dia,with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer- in-charge ( level adjusting hangers , ceiling cleats and expansion hold fasteners to be paid for separately).
Providing and fixing 6 mm dia. G.I level adjusting hanger (upto 1200mm length), fixed to roof slabs by means of celing cleats made out of G.I flat 40 x3 mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer - in charge.
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15 ) of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P brass /stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fxing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer - in- charge . ( Only weight of grill to be measured for payment).
Providing and fixing Brass 100 mm mortice latch and lock with 6 leveres without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
Providing and fixing plain multipurpose cement board ( Hight pressure steam cured ) with suitable screws for cement particle board in ceiling etc. complete ( frame work to be paid seperatately).
6 mm thick cement fiber board as per IS : 14862
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
1:3:6 (1 cement : 3 coarse sand ( zone- III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources )
Reinforced cement concrete work in beams suspended floor, roofs having slop up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding, the cost of centering, shuttering, finishing and reinforcement with 1: 1.5:3 (1 cement :1.5 coarse sand (zone -III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
Centering and shuttering including strutting , propping etc. and removal form for
Foundation ,footings, bases of columns, etc. for mass
Walls(any thickness) including attached pilasters, butteresses,plinth and string courses etc.
Suspended floors, roofs, landings, balconies and access platform.
Lintels, beams, plinth beams, girders, bressumers and cantilevers.
Columns,pillars, piers, Abutments, Posts and struts.
Steel reinforcement for R.C.C. work including straightening , cutting, bending,placing in position and binding all complete above plinth level.
Therm- Mechanically Treated bars of grade Fe- 500 D or more.
Providing and fixing up to floor five level precast cement concrete hollow block of size 400 mm x 100 mm x 200 mm, including hoisting and setting in position with cement mortar 1 : 3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1 :3 : 6 (1 cement : 3 coarse sand (zone -III):6 graded stone aggregate 12.5 mm nominal size.)
Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding,buffing,polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Enginee- incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
Providing and applying white cement based putty of average thickness 1 mm ,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish , all complete as per the direction of Engineer - in - charge.
Providing and placing on terrace ( at all floor levels) polyethylene water storage tank,IS : 12701 marked, with cover and suitable locking aggangement and making necessary holes for inlet , outlet, and overflow pipes but without fittings and the base support for tank.
12 mm cement plaster of mix:
1 : 4 (1 cement : 4 fine sand)
12 mm cement plaster finished with a floating coat of neat cement of mix:
1:4 (1 Cement : 4 fine sand)
Cement concrete flooring 1: 2: 4 (1 cement:2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.
40 mm thick with 20 mm nominal size stone aggregate.
Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 ( 1 cement : 3 coarse sand (zone- III) derived from natural sources : 6 graded stone aggreagte 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, leveling & dressing & finishing the top smooth.
Providing C.C. surface drain ( 1 cement: 3 sand :6 graded stone aggregate 40mm nominal size) finished with cement mortar 1 : 4 including a coat of neat cement inside the drain and on its top and disposal of surplus earth etc. complete as per standard design.
23 cmx 23 cm surface drain
Providing and laying vitrified tiles in different sizes ( thickness to be specified by manufacturer ), with water absorption less than 0.08 % and conforming to I.S 15622,of approved make, in all colours & shade, in skirting,riser of steps, over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 coarse sand ), jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joint with white cement & matching pigments etc. complete.
Size of tile 600 x 600 mm sqm
Providing and fixing 1 st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer ), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved , bottle green black of any size as approved by Engineer - in - charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1 : 3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge.Concealed work, including cutting chases and making good the walls etc.
20 mm nominal dia pipes.
Providing and fixing chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fitting with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge.External work
20 mm nominal dia pipes.
Providing wood work in frames of doors windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or with dash fasteners shall be paid for separately).
Second class teal wood.
Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws. Excluding panelling which will be paid for separately, all complete as per direction of Engineer- in - charge. ( Note :- Butt hinges and necessary screws shall be paid separately). Second class teal wood.
35 mm thick shutters
Providing and fixing 12 mm thick panelling of panelling and glazing in panelled and glased shutters for doors, windows and clerestory windows ( area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.
Marine plywood conforming to IS : 710
Providing and fixing cup board shutters 25 mm thick, with Pre laminated flat pressed three layer particle board or graded wood particle board IS : 12823 marked, exterior grade (Grade I Type II), having one side decorative lamination and other side balancing lamination, including II nd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer - in - charge.
Providing ad fixing Pre- laminated flat pressed 3 layer 9 medium density) particle board or graded wood particle board IS : 3087 marked,with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS :12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer ( fittings to be paid separately).
18 mm thick
Providing and fixing 18mm thick , 150mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I , IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade , nickel plated M.S pipe 20 mm dia ( heavy type)curtain rod with nickel plated brackets, including fixing with 25 x 3 mm M.S flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete.
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.
Providing and fixing bright finished brass handles with screws etc. complete.
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete:
125 x 85 x 5.5 mm (heavy type)
Providing and fixing bright finished brass tower bolts ( barret type) with necessary screws etc. complete :
200 x 10 mm each
Providing and fixing bright finished brass door latch with necessary screws etc. complete :
Providing and fixing white vitreous china pedestal type water closet ( European type W.C. pan ) with seat and lide, 10 litre low level white P.V.C flushing cistern, including flush pipe with manually controlled device ( handle lever ), conforming to IS: 7231, with all fittings and fixture complete, including cutting and making good the walls and floors wherever required :
W.C pan with ISI marked white solid plastic seat and lid
Providing and fixing wash basin with C.I brackets, 15 mm C.P, brass pillar taps, 32 mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
White vitreous chine flat back wash basin size 550 x 400 mm with single 15 mm C.P brass pillar tap.
Wiring for light point / fan poin/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate suitable GI box and earthing the point with 1.5 sq. mm FRLs PVC insulated copper conductor single core cable etc. as required.
Group C
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2 x 2.5 sq. mm + 1 x 2.5 sq.mm earth wire
2 x 4 sq. mm + 1 x 4 sq.mm earth wire
2 x 6 sq.mm + 1 x 6 sq.mm earth wire
Supplying and fixing suitable size GI Box with modular plate and cover in front on surface or in recess including providing and fixing 20 A modular socket outlet and 20 A modular SP MCB, " C" curve including connectio painting etc. as required.
Supplying, providing and fixing 6 pin 5/6 amps socket outlet and 5/6 amps piano type switch on surface or in recess with suitable size of phenolic laminated sheet cover in front including connection, painting etc. as required.
Supplying, providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps piano type switch on surface or in recess with suitable size of phenolic laminated sheet cover in front including connection, painting etc. as required.
SITC of decorative light wall mounting chrome finish fixture suitable for LED B22 lamp with 3W warm white LED bulb similar to Havells ELEGANT-Ordering Code- LHFOECEITZ1O014 or equivalent and with the approval of Engineer in charge.
Supplying,installation, testing and commissioning of 12 watts LED High efficiency, power saving recessed moounted luminair and PC diffuser complete with inbuilt driver similar to Havells TRIM PLUS LED PANEL ROUND cool day light ordering code LHEBLDP51N1W015 equivalent to ISI standard with minimum warranty period as manufacture provided and with the approval of Engineer in charge.
Supplying,installation, testing and commissioning of 18 watts LED High efficiency, power saving recessed moounted luminair and PC diffuser complete with inbuilt driver similar to Havells TRIM PLUS LED PANEL ROUND cool day light ordering code LHEBFCP51Z1W018 equivalent to ISI standard with minimum warranty period as manufacture provided and with the approval of Engineer in charge.
Supplying,installation, testing and commissioning of 12 watts LED High efficiency, power saving surface mounted luminair and PC diffuser complete with inbuilt driver similar to Havells TRIM COSMO SURFACE ROUND cool day light ordering code LHEAAHP51L1W012 or its equivalent to ISI standard with minimum warranty period as manufacture provided and with the approval of Engineer in charge.
Supplying,installation, testing and commissioning of 18 watts LED High efficiency, power saving surface mounted luminair and PC diffuser complete with inbuilt driver similar to Havells TRIM COSMO SURFACE ROUND cool day light ordering code LHEAAHP51L1W018 or its equivalent to ISI standard with minimum warranty period as manufacture provided and with the approval of Engineer in charge.
SITC of 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush less Direct Current (BLDC) Motor, class of insulation : B, 3 nos blades, 30 cm long down rod, 2 nos. canopies,shackle kit, safety rope, copper winding, Air delivery minimum 210Cum/ Min, 350 RPM ( tolerance as per IS : 374-2019), THD less than 10 % , electronic regulator unit for speed control and all remaining accesories including safety pin, nut bolts, washers,temperature rise - 75 degree C (max.), insulation, resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required in equivalent to ISI standard with minimum warranty period as manufacture provided and with the approval of Engineer-in- charge.
SITC of 5 watts High efficiency, power saving LED tube light and PC diffuser complete with inbuilt driver similar to Havells E- LITE LED PRIDE PLUS cool day light ordering code LHEXBLP7IN1W005 equivalent to ISI standard with minimum warranty period as manufacture provided and with the approval of Engineer in charge.
SITC of 10 watts High efficiency, power saving Bulk Head similar to Havells Endura Rugby Neo N- IP65 or equivalent to ISI standard with minimum warranty period as manufacture provided and with the approval of Engineer in charge.
SITC of 10 watts High efficiency, power saving LED Bollard garden light similar to to B- 22 Abia Bollard Light ( 500 Mm) with IP 54 rating or similar to ISI standard with minimum warranty period as manufacture provided and with the approval of Engineer in charge.
SITC of 10 watts High efficiency, power saving LED tube light and PC diffuser complete with inbuilt dreiver similar to Havells E- LITE LED PRIDE PLUS NEO cool day light ordering code LHEXACP5IN1W010 equivalentto ISI standard with minimum warranty period as manufacture provided and with the approval of Engineer in charge.
Supplying and fixing call bell/ buzzer suitable for single phase,230 volts, complete as required.
Supplying and fixing following way, single, pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator)
6 way,Double door
Supplying and fixing 5 amps to 32 amps rating, 240/ 415 volts,10 kA, " C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required.
Single Pole
Supplying and fixing following rating, double pole, 240V, isolator in the existing MCB DB complete with connections, testing and commissioning etc.as required.
Providing earthing with safe earthing electrode of galvanization 80 to 100 microns, length 2 mtr, outer dia 50 mm, inner dia 19 mm and inner space be filled with crystalline conductive mixture including filling-up with electrolite (Back fill compound ) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required (Ashlok)
Providing and fixing of SMC Junction Box of size 170 x 170 x 105 mm similar to Sintex GSJB 1414 as required equivalent to ISI standard with minimum warrantly period as manufacture provided and with the approval of Engineer in charge.
Supplying & Laying of one number 3.5 crore 25 sqmm armoured Aluminium cable PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade direct in ground including excavation and refilling the trench etc as required.
Supplying & Laying of one number 2 crore 10 sqmm armoured Aluminium cable PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.
Supplying & fixing of one number 2 crore 10 sqmm un- armoured solid Aluminium conductor cable PVC insulated and PVC Sheathed/ XLPE power cable of 1.1 KV grade as required for the connection of street lights.
SITC of 100 A capacity TPN 4 P MCCB unit with enclosure duly painted with powder coating, earthing etc. as required.
SITC of 100 A capacity 4 way TPN Aluminium busbar chamber wall mounted in steel enclosure duly painted with powder coating with earthing etc. as required.
SITC of 30 A Mechanical Key tag switch modular Mono block design- 2 M Front plate desing etc. as required.
Supplying, Installation, testing and commissioning of 48 watts street light with High efficiency,power saving , IP65 protection and impact resistance of IK07 similar toLUKER STRADE LED STREET LIGHT or equivalent to ISI standard with minimum warrantly period as manufacture provided and with the approval of Engineer in charge.
SITC of A.C. Exhaust fan 225 mm sweep 240 volts with all accessorie etc. as required similar, to Orient 225 mm Spring Air or equivalent to ISI standard with minimum warranty period as manufacture provided and with the approval of Engineer in charge.
M/s Jas Construction
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .