Construction of Main Building for Inspection House at Gauriganj, Amethi

Amount

Excavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches.

Sand filling in pinth including supply necessary qunatity of sand from a distance not excluding 8 km from the site of work and including watering dresssing etc. rate to include cost of all materials, labour and T&P etc. required for proper completion of the work.

Providing and laying cement concrete in 1:4:8 (1 Cement : 4 coarse sand : 8 graded Brick Ballast 40 mm nominal size) and curing complete including cost of formwork in foundation and floors.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Centering & Shuttering for RCC work in building work.

First class brick work in 1:4 cement and coarse sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour and T & P etc required for proper completion of the work.

Earthwork in filling by power transport for a lead upto 2.0 km including excavation loading, unloading, manual compaction and dressing including all lifts.

Providing and laying cement concrete in 1:5:10 (1 Cement : 5 coarse sand : 10 graded Brick Ballast 40 mm nominal size) and curing complete including cost of formwork in foundation and floors.

Providing and laying cement concrete in 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) and curing complete including cost of formwork in foundation and floors.

R.C.C. work with cement approved coarse sand and 20mm guage approved stone grit in the proportion of 1:1:5:3 in Column excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the works. strength of the concrete shall not beless than M-20

R.C.C. work with cement approved coarse sand and 20mm guage approved stone grit in the proportion of 1:1:5:3 in slabs & beams excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the works. strength of the concrete shall not beless than M-20

First class brick work in 1:4 cement and coarse sand of 2.25 fineness modulus) mortar in for super structure above plinth level upto floor two level including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than12cm.

R.C.C. work with cement approved coarse sand and 20mm guage approved stone grit in the proportion of 1:1:5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the works. strength of the concrete shall not beless than M-20

Mild steel or iron in plain work such as reinforced concrete of reinforced, brick work (when not included in over all rates) brought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.

Making Drain along apron.(Size 0.50x 0.15 including earthwork, 1:4:8 base concrete, 1:4 Brickwork, Flooring and plaster.)

12 mm plaster with cement mortar in proportion of 1: 3cement & fine sand of 1.25 F.M.(For weather exposing surface)

12 mm plaster with cement mortar in proportion of 1: 4 cement & fine sand of 1.25 F.M.(For inner surface)

12 mm plaster with cement mortar in proportion of 1: 4 cement & fine sand of 1.25 F.M.(For ceiling surface)

Providing and injecting chemical emulsion for preconstructional antitermite treatment and creating a chemical barrier under and alround the column pits wall trenches basement excavation top surface in plinth filling junction of wall and floor, along the external perimeter of binding expansion joints, surroundings of pipes and conduits etc, complete (plinth area of the building at found floor only shall be measured as per I.S. 6313 (Part II 1981) Alderine emulsifiable concentrate or any other approved material such as Heptrachlor or chlordance will be used. the rate of application of chemical emulsion shal be as follows :(1) treatment for masonary & oundation 5 liters per Sqm. (2) back fill in immediate contract with foundation 7.5 liers/Sqm (3) Treatment of top surface of plinth. filling 5 litres per Sqm (4) Treatment of soil along external perimeter of building 7.5 liters/Sqm. (5) tretment of soil under apron along external parimter 5 liters/Sqm.

Providing and laying "brick coba" 12mm thick laid with M-150 class brick bat coba 7.50cm thick with gap of 15mm to each other over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water froofing compound spreading cement slurry mixed with acrelic cement concrete waterproofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement & coarse & morter finished smooth & top mashed false square 30cmx30cm & side wall parapet shall be monolythic plaster wall up to 30 cm higher & junction corner shall be rounded by brick ballast & cement and coarse sand masonary coba with top finished mixed with acetic water proofing compound @2% by weight & including S/o all material, labour, T&P etc. com for proper completion of work (S.I.9)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. . 35 mm thick shutters of Second class teak wood

Mild steel or iron work of small size and sections such as holding down bolts, hold fast, tie rods, grating ets, (when not included in and overall rates) wrought to required shape as necessary for bendingetc. Including supply of steel and its wastage including cost of bolts, nuts if required, welding, grinding and making holes as required for completion of works for fabrication of Grill/ stair case railing.

Drip coarse including all materials, labour and T&P etc with proper completion of the work

40 mm thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 20 mm graded approved stone laid in panels finished with 3 mm. flooring coat of neat cement or cement and marble dust in 5:1 as specified over without base concrete and removing any overlapping mortar at the joints of panels if any and giving them a uniform finish including supply of all materials, labour and T& P etc required for proper completion of work.(for Apron Work)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm

Supply and fixing 6 mm thick china white glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished and jointed with white cement slurry and pigment& polishing complete including supply of all materials, labour T&P etc. required for proper completion of the work. (Size of tiles upto 300x 300 mm)

Painting or varnishing on iron work in small area or new wood work with one coat of ready mixed priming paint & one coat of approved superior ready mixed paint of clear synthetic varnish including supply of all materials, labour tools & Plants etc, required for proper completion of the work paint to be used should confirm the ISI no. 103.1950 and for 1 extra coat.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16mm

Tower bolt including all materials, labour and T&P etc with proper completion of the work.

Handle including all materials, labour and T&P etc with proper completion of the work. 125 mm

Stainless steel SS grade 304 , curtain rod 25 mm dia 1.20mm thick

Stainless steel SS grade 304, brackets ( curtain rod) 25 mm dia 1.20mm thick

Wiring point for light with 1.5 sq.mm.FR PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, modular type switch & ceiling rose/angle/batten holder on 3mm. Thick phenolic laminated backelite sheet etc. complete in all respects as directed including matching colour wash.

Wiring point for fan / fresh air fan (light duty exhaust fan) with 1.5 sq.mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire,GP Box , piano type switch & ceiling rose on 3 mm. thick backelite sheet etc., complete in all respect including matching colour wash.

Wiring point for call bell with 1.5sq.mm. FRPVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit partly concealed in the wall and partly laid in slab alongwith the reinforcement before cocreting complete with14 SWG copper earth continuity wire and piano type bell push or 2 pin socket etc., complete in all respects including matc-hing colour wash.

Supply and fixing and concealing of 20 mm dia. 2mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin / adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc required for proper completion of the work as per directions and to the satisfaction of Engineer in charge.

Supply and fixing and concealing of 25mm dia. 2 mm thick PVC conduit pipe with ISI mark embossed and with PVC acceessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching colour wash including cost of all material labour and T&P etc. required for proper complection of the works as per directions and to the satisfaction of Engineer in charge.

Wiring point for plug with 1.5sq.mm. FR P VC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting, complete with 14 SWG copper earth continuity wire and piano type switch and socket etc.,complete in all respects including matching colour wash.

Wiring point for H.P.M.V./ Sodium Vapour lamp with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in heavy guage rigid steel conduit concealed in the wall, complete with 14 SWG copper earth continuity wire and 15 A piano type switch etc. complete in all respect including matching colour wash.

SUBMAINS Supply and wiring of submain with two number 1.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit concealed in wall, with one number 14 SWG copper earth continuity wire etc., complete in all respects including matching colour wash etc. complete in all respect.

Supply and wiring of submain with two number 4 sq.mm. FR PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm. dia heavy gauge rigid steel conduit partly concealed in the wall and partly laid in slab alongwith reinforcement before concreting, with one number 14 SWG copper earth continuity wire including matching colour wash etc. complete in all respects.

Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit concealed in wall, complete with one number 14 SWG copper earth continuity wire including matching colour wash etc., complete in all respect.

Supply and wiring of 4 number 6 sq.mm. FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 25mm dia heavy guage rigid steel conduit concealed in wall, with two number 14 SWG copper earth continuity wire including matching colour wash etc.complete in all respect.

Light & Fan Fixture Supply & fixing of Batton/Angle holder including making connection etc. as required.

S&F of LED tube light with batten suitable for up to 1x22 W LED tube light fitting including tube on surface complete in all respects. Cat AAA

Supply and fixing of 3 Watt to 6 Watt LED Spot/Decorative mirror light luminaire Confirming to IP 66 Protection complete in all respect.CAT-AAA

S/F hexagonal fan box with hexagonal side of approx 80 mm in length fabricated from 16 SWG M.S. sheet incorporating 10mm dia. M.S. round bar duly bent for supporting fan hanger duly painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof bafore concreting alongwith supply of all material,labour,T&P etc. required for proper completion of the work.

Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect(Wall bracket)

Supply of ceilling fans with fan motor of A.C Permanent insulation, capacitor rating conforming BEE 5 Star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volts,50 Hz, 1-Ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system. BEE 5 Star rated-1200 mm sweep

Errection and testing of ceiling fan and regulator for room haight upto 3.5 metres including supply of 3mm thick G.I. rod 19 mm dia duly painted.

Errection and testing of exhaust fan and on the existing hole with suitable size of rag bolts,nuts and washers etc. complete in all respects.

Supply and fixing of fan regulator (Modular)120-280 V , ISI marked, on the exiting switch board including making connection, all the required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer I/C of work.

Cables Supplying and laying of aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at the depth of 750 mm bellow ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall be fixed on MS clamps etc.of suitable size or as directed by the Engineer-Incharge ,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc.Following size 150 sqmm. 3½ core

S&F of brass nickle plated compression gland for PVC insulated & armoured served sheathed,undergroun cable including rubber ring etc. complete in all respects. The armouring of the cable shall be peroperly connected with the earth as per direction of Engineer-incharge of size 150 sqmm. 3½ core

S&F of plain or pin type copper tin plated cable socket (lug) to the cable leads,insulating with tap and making connection etc complete in all respects as per direction of Engineer-incharge of size 150 sqmm.

Earthing System Supply and burying of Safe Earthing Electrod T-19 Cu-Copper Coated,Length 3000mm,outer pipe 48.4mmx3.2mm,inner pipe 26.9mm x 2.6 mm,terminal Dia 12mm,coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing.(From electrode terminal to switch board,cost of 25x3 Copper Strip will be extra) Make : As approved in U.P.P.W.D. & C.P.R.I. Certified.

Earthing System Supply and burying of Safe Earthing Electrod T-19 Cu-Copper Coated,Length 3000mm,outer pipe 48.4mmx3.2mm,inner pipe 26.9mm x 2.6 mm,terminal Dia 12mm,coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing.(From electrode terminal to switch board,cost of 25x3 Copper Strip will be extra) Make : As approved in U.P.P.W.D. & C.P.R.I. Certified. Supply and fixing of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respects.

MCB's & DB's S & F surface/Flush mounting 6ways TPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge.

S&F surface/flush mounting 4 ways SPN distribution board with additional metal door without MCB complete in all respect, as directed at site by Engineer in charge.

S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve CAT A

S/f of 40 Amp. 4 pole Isolator.CAT-A

S/f of 63 Amp. 4 pole Isolator.CAT-A

S&F of 40 Amp. D.P. Isolator

MISCELLANEOUS ITEMS S/F of power plug with 15 A/240 V flush type modular switch and 5 pin 15 A/240 V flush type universal socket in suitable M.S. box of 175mmx 100mmx 50mm size with phenolic laminated backelite sheet cover 3 mm thick fixed with brass m/c screw.

S/F of steel enclosure surface/flush mounting fitted with 20 A 2 pin and earth metal clad scraapping earth plug and socket complete in all respects. CAT-A

S/F of call bell of approved make on polished MDFEG/Teak wood board including making connection etc. complete.

S/Drawing of UTP 4 Pair CAT-6 LAN Cable in the existing surface/recess/steel/PVC conduit as required.(1 run of cable)

Supply and fixing following size/module, G.I box alongwith moduler base & cover plate for modular switches in recess etc. as required. Three module (100x75mm)

Supply and fixing following size/module, G.I box alongwith moduler base & cover plate for modular switches in recess etc. as required. Four module (125x75mm)

Supply and fixing following size/module, G.I box alongwith moduler base & cover plate for modular switches in recess etc. as required. Six module (200x75mm)

Supply and fixing following size/module, G.I box alongwith moduler base & cover plate for modular switches in recess etc. as required. Eight module (125x125mm)

Supply and fixing following size/module, G.I box alongwith moduler base & cover plate for modular switches in recess etc. as required. Twelve module (200x150mm)

Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40mm flush bend, 20mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. (a) White Vitreous China Flat back wash basin size 550x 400mm with single 15mm C.P. brass pillar tap pillar tap.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink with drain board of size 510x1040x200mm

Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. Felxible pipe (a) 32mm dia

Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. Felxible pipe (b) 40mm dia

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required (a) One urinal basin with 5 litre white P.V.C. automatic flushing cistern.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing : Oval shape 450x350mm (outer dimensions)

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing : Rectangular shape 1500x450mm

Providing and fixing 8mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate for Eureopean type W.C. of quality and make as approved by engineer-in-charge.15mm nominal bore

Providing and fixing CP Brass 32mm size Bottal Trap of approved quality & make and as per thedirection of Enginer-in-charge.

Providing and fixing CP Brass Single lever lelephonic wall mixture of quality & make and as per the direction of Enginer-in-charge.(a) 15mm dia nominal dia.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190 gms.

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and Fixing C.P. brass Ablution health faucet assembly with 1.0 m long braided PVC hose with mounting bracket fixed on wall complete. [FOR EWC]-Make-JAQUAR ALD-565

Providing and fixing C.P. brass Two-way angle valve for EWC points & for fixing Ablution Health Fauct of approved quality conforming to IS:8931. 15mm nominal bore-ESSCO SQT 526AKN

Providing 15mm dia. inlet C.P. brass Providing and Fixing C.P. Single flow overhead shower(With Arm)-ESSCO EOS-542A-125mm DIA

Providing & fixing soil, waste and vent pipes.(a) 100mm dia centrifugally cast iron S & S pipe.

Providing lead caulked joints to sand cast iron/ centrifugally cast (spun) iron pipes & fitting of diameters.(a) 100mm

Providing & fixing M.S. holder bat clamps of approved design to sand cast iron/centrifugally cast (Spun) iron S & S pipe embeded in & including cement concrete blocks 10x10x10cm. of 1:2:4 mix (1 cement : 2 coarse : 4 graded stone aggregate 20mm nominal size). Including cost of cutting holes & making good the walls etc.(a) for 100mm dia pipe.

Providing & fixing cast iron trap of self cleansing design with or without vent arm complete, including cost of cutting & making good the walls & floors.(a) 100mm inlet & 75mm outlet.

Providing & fixing cast iron coller.(a) 100mm dia.

Providing and fixing plain cast iron S & S sanitary bend.(a) 100mm

Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete.(a) 100mm

Providing and fixing centrifugaly cast iron single equal plain junction of required degree(a) 100x100x100mm

Providing and fixing cast iron terminal guard.(a) 100mm

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion . (i) Single socketed pipes.(a) 110mm diameter

Making khurras 45x45cm with average minimum thickness of 5cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, punning, rounding the edges and making and finishing the outlet complete.(a) 110mm

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.(a) 110mm

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter and weighing not less than 440 grams.

Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc.(internal work) Exposed on wall (a) 25mm dia nominal bore (medium duty)

Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc.(internal work) Exposed on wall (b) 32mm dia nominal bore (medium duty)

Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc.(internal work)Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall(a) 15mm dia nominal bore

Concealed pipe including painting with anticorrosive bitumatic paint, cutting chases and making good the wall(b) 20mm dia nominal bore

Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work.(a) 15mm dia nominal bore.

Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work.(b) 20mm dia nominal bore.

Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work.(c) 25mm dia nominal bore.

Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work(d) 32mm dia nominal bore.

Providing and fixing 45cm long unplasticised PVC connection pipe with brass unions.(a) 15mm nominal bore

Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 (a) 15mm nominal bore

Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.a) 15mm nominal bore

Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931(a) 15mm nominal bore

Providing and fixing gun metal gate valve with wheel of approved quality.(a) 20mm dia nominal bore

Providing and fixing gun metal gate valve with wheel of approved quality.(b) 25mm dia nominal bore

Providing and fixing gun metal gate valve with wheel of approved quality.(c) 32mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete(a) 20mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete(b) 25mm nominal bore

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately.(a) Circular Tank

Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50 m.(a) Pipes 80mm to 300mm diameter.

Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.(a) 100mm diameter

Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.(b) 150mm diameter

Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.(a) 100mm diameter S.W. Pipe

Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design.(b) 150mm diameter S.W. Pipe

Providing and fixing square mouth S.W. Gully trap grade 'A' complete with C.I. grating brick masonry chamber with F.P.S. bricks of class designation 75 and water tight C.I. cover with frame of 300 x 300mm. size (inside) the weight of cover to be not less than 4.50 Kg and frame to be not less than 2.70 Kg as per standard design. (a) 150 x 100mm. size P type With Sewer bricks conforming to IS : 4885

Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design: Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg).With FPS bricks of class designation 75(i) For Sewer Line

Inside size 90x120cm & 90cm deep including C.I. cover with frame (medium duty) total wt. of cover & frame to be not less than 116 Kg (wt. of cover 58 Kg & wt. of frame 58 Kg.

Inside size 90x120cm & 90cm deep including C.I. cover with frame (medium duty) total wt. of cover & frame to be not less than 116 Kg (wt. of cover 58 Kg & wt. of frame 58 Kg. Extra for depth of man hole size 90x120cm

Providing M.S. foot rests including fixing in manholes with 20x20x10cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20mm nominal size) as per standard design With 20x20mm square bar

SHANKER LAL YADAV

SATYA DEV MISHRA