WBPWD/EE-I/CKHED/eNIT135/24-25

Amount

Supply & delivery of 1.1 KV Gr. XLPE/ PVC Armoured Aluminium Cable (Gloster / Havells / Approved by EIC) 4 core 50 sq. mm.

Laying of cable on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting 3/3.5/4 core 35 sqmm to 50 sqmm [PWD/GS Page: F-1 Item: 2/c]

S & F compression type brass cable gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry of XLPE/PVC armoured cable. 4 core 50 sq. mm. [PWD/GS Page No.: F-4 Item No.: 7/c]

Finishing the end of the XLPE/PVC armoured cableas by crimping method incl. S&F solderless socket (Dowels make), tapes, anticorrosive paste & joiting materials. 4 core 50 sq. mm. [PWD/GS Page No.: F-5 Item No.: 8/b]

Supplying and fixing L&T 160A 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. [PWD/GS Page: D-3 Item: 4/a]

S&F double door 8-Way Vertical TPN MCB Distribution board for 160A MCCB incomer with IP-42/43 protection, on angle iron frame on wall incl. Inter connection & provision for earthing attachment (Legrand /Siemense /Havells Metalica /ABB Elegance - as per direction of EIC) [PWD/GS Page: D-11 Item: 15]

S&F double door Horizontal 6-Way TPN MCB Distribution board with IP-42/43 protection, concealed in wall (Legrand: (607716 /Siemense /Havells Metalica /ABB Elegance - as per direction of EIC) [PWD/GS Page: D-10 Item: 14 ]

S&F double-door (2+12) Way SPN MCB Distribution Board with IP-42/43 protection, concealed in wall.(Legrand: (607712 /Siemense /Havells Metalica /ABB Elegance - as per direction of EIC) [PWD/GS Page: D-09 Item:13]

S&F 415 V L&T 100A 4- Pole MCCB of Breaking capacity 25kA/35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting in existing DBs / enclosure and necessary connection[PWD/GS Page: D-8 Item:10]

Supply & fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection (Legrand /Siemense /Havells Metalica /ABB Elegance - as per direction of EIC) [PWD/GS Page: D-6 Item: 7]

i) 63A FP MCB

ii) 63A TP MCB

iii) 32A TP MCB

iv) 32A DP MCB

v) 6-32A SP MCB

Distribution wiring in 3x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar and 'L' sahped insulator chair incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [equivalet to PWD/GS Page: E-14 Item: 2]

i) On board 5A

ii) Average run: 08 Mtr.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required [equivalet to PWD/GS Page: E-14 Item: E/1/a]

i) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

ii) 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC

iii) 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

iv) 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 2X25mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required for 4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC [equivalet to PWD/GS Page: E-9 Item: E/1/a & E-16 item: 7]

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [PWD/GS Page: F-5 Item: 9]

i) 36/0.3 (2.5 sqmm)

ii) 56/0.3 (4 sqmm)

iii) 84/0.3 (6 sqmm)

iv) 80/0.4 (10 sqmm)

v) 126/0.4 (16 sqmm)

Supply & Fixing 250 V two 5 Pin 6A flush type plug socket with two 6A Piano key type (Anchor make) switch on sheet metal box with bakelite top cover and earthing attachment incl. S&F sheet metal box appropriate of size [16 SWG] with 3mm thick bakelite top cover. [PWD/GS Page: E-4 & 5 Item: 11, 12 & 14, 15]

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. [PWD/GS Page: E-6 Item No.: 22]

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite top cover of 3mm thick and making necessary connections as required (Computer Board) [PWD/GS Page: E-7 Item: 26 ]

Supply and fixing 2-way MCB SS enclosure with IK-08 protection, [Legrand 507791] powder coated & S&F of 25A, 2 pole MCB in DIN channel, concealed in wall after cutting the wall & mending good the damages to the original finish or total establishment on flat iron frame in wall incl. inter-connection with suitable size of copper wire, necy. painting,& provision for earthing attachment etc. as required. [PWD/GS Page: d-9 Item: 11 & [PWD/GS Page: d-6 Item: 7]]

Supplying & fixing of 230V, Timer DB Fixed on Wall by flat iron/Angle frame or as per direction of EIC . The Box should comprising following accessories.........A).Double-door SPN-MCB Distribution Board with IP-42/43 protection 2+8 way make Legrand/L&T or as to GS. B). 1No. 250V ,50Hz,16 Amp Digital daily & weekly time switches(Make L&T-67DDT0/Eqv. legrand) C)1No 250V,25A DP-Contactor (Make- legrand model -DX³ contactors - 25 A 2 NO contactor 412544). D)1No. 250V,25A DP-MCB(Make-L&T/Eqv. legrand). E)The complete arrangement must be wiring by suitable size of PVC insulated Cu wire with suitable socket/lugs as per requirement & direction by EIC .

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Make:- Legrand/Anchor/ Havells/ABB), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.. [Ref : E-17/5(a)]

S&F EPC make 9" Sweep A.C Exhaust fan incl. making hole on wall with nuts & bolts of required with S&F of louver shutter. [PWD/GS Page: C-4, Item: 28, 30 ]

S&F EPC make 12" Heavy Duty Sweep A.C Exhaust fan incl. making hole on wall with nuts & bolts of required with S&F of louver shutter. [PWD/GS Page: C-4, Item: 28, 30 ]

Supply & Fixing 48" (1200mm) AC ceiling fan make: (Orient PSPO NEWBREEZE or SUMMERCOOL / equivalent of UHSA approved by EIC) complete with down rod, steel safety rope, canopy fork, blades with all other accessories etc. but without regulator. [PWD/GS Page: C-3 Item: 21/a]

S&F single 4ft LED tube light fitting incl. 4ft LED tube (essential LEDtube 1200mm 20W865T8 IND I 2100 lm), complete with all accessories suspended from ceiling/beem with L-clamp/ beem clamp. [Philips: TMC 501 P1XT LED 22W P3241) or Equivalent Havells] [PWD/GS Page: C-2 Item: 17]

S&F double 4ft LED tube light fitting incl. 2 nos. 4ft LED tube lamp (essential LEDtube 1200mm 20W865T8 IND I 2100 lm), complete with all accessories suspended from ceiling/beem with L-clamp/ beem clamp. [Philips: TMC 501 P2XT LED 22W P3242) or Equivalent Havells] [PWD/GS Page: C-2 Item: 17]

S&F of 2ftX2ft 40W LED Panel light fitting complete with all accessories suspended from false ceiling / decorated false ceiling with all accessories [Philips: RC380B LED36S- 6500 G4 L60 W60 PSU OD OC(HSN CODE: 9405) / or or Equivalent of Havells, Crompton]

AC INSTALLATION WORK

Supply & Delivery of 230V,1-Ph, 50Hz, 2Tr. capacity Concealed Split Air Conditioning Machine along with 1 no. IDU of rated Cooling Capacity:- 24000 BTU/HR, Compressor:- Rotary Type, Remote Control:- Yes, Condenser Coil:- Copper, Refrigerant Type:- R-410A/R-32, Air Flow/IDU:- 800CFM, Operating Mode:- Cool & Fan Mode, Sleep Mode:- Yes, Timer:- Yes. (Make:- Daikin/Voltas/Hitachi/O General)

Supply & Delivery of 230V,1-Ph, 50Hz, 3Tr. capacity Concealed Split Air Conditioning Machine along with 1 no. IDU of rated Cooling Capacity:- 36000 BTU/HR, Compressor:- Rotary Type, Remote Control:- Yes, Condenser Coil:- Copper, Refrigerant Type:- R-410A/R-32, Air Flow/IDU:- 1200CFM, Operating Mode:- Cool & Fan Mode, Sleep Mode:- Yes, Timer:- Yes. (Make:- Daikin/Voltas/Hitachi/O General)

Lifting,Shifting,Installation,Testing & Commissioning of IDU & ODU of following capacities concealed type Split Air Conditioners machines, after making hole in ceiling /wall on mending good the damages to the original finish as required & necy. scaffolding arrangement, labour cost etc.on both side(IDU & ODU Installation), and also connecting rod/rope from the ceiling must be attached into the machine by nuts,bolts etc. as per recurement with incl. Supply of required Refrigerant R-410A ,S&F of necy. fixing arrangement for indoor & Outdoor duly painted etc. as per direction of EIC if required.

Supply fabrication and fixing specically for indoor unit should be supported with ms channel by 2 nos of 40mm x 40mm x 6mm to distribute the total load from the mounted wall and by drilling holes for 4nos downrod & connecting the downrod into the channel by nuts,bolts etc. & including supporting angle 25 mm x 25mm x 6mm arrangement as per direction of EIC.

Supplying & fixing of 2nos 1.45 mtr long MS U-Channel (TATA Make) of size (75 mm x 50 mm x 50mm x 6mm thick) for making platform for installation of outdoor unit on it after cutting holes (10 inch) into the wall & grouting the same with cement concrete (1:1 %1/2: 3) etc incl. mending as orginal. The fabrication of platform with horizontal MS angle of 25 mm x 25 mmx 6mm with supporting angle 50mm x50mm x 6mm on the outer edge and also in the middle portion of the platform and for transmitting the load, 2Nos (50 mm x50 mm x 6 mm) MS Angle inserted diagonally with the platform and exiting wall .The entire structure should be baricated with 25mmx 25mm x6mm MS angle and height will be 1M to ensure the safety of ODU maintenance. The platform will be 2Mx1.2M. incl. scaffolding arrangement, labour cost etc. The entire structure shuould be painted with One coat of red lead/Zinc chromate priming 1st coat of synthetic enamel paint over the primer then 2nd coat of synthetic enamel paint over the 1st coat(Structural design should be approved from EIC.)

Copper Refrigeration pipe line for liquid and suction line with fittings, elbows, bends, supports & brackets etc. (Make- Ryoku/Totaline/Jobu/ Nippon/EIC Approved) Suction Line (5/8 OD with 0.7mm thick)

i) Liquid Line(1/4" OD with 0.6mm thick).

Supply & Fixing Pipe Insulation in liquid & suction line with 9mm nitrile rubber tube wrappling with Water Prof Heavy Duty AC Insulation Tape (Supreme/Accoflex/Armacell/EIC Approved) Suction Line (5/8 OD with 0.7mm thick)

i) Liquid Line(1/4" OD with 0.6mm thick).

Supply and fixing of AI powder coated continuous Grill (Make- Premier, Dynacraft/ EIC approved.)

Supply and laying Control copper Cable (PVC insulated & unshethed,un-armoured) from Condensing Unit to IDU control panel (Make: Havells/RR Kable /finolex/EIC Approved ) 4 core 2.5 sq mm communication cable.

Supply and laying of Drain Water piping work out of UPVC hard pipes of following sizes incl. nitrile insulation with fiting accessories bends, elbows, tees flanges, tapings, wall sleeves hangers, supports, anchors etc. as required.(Make : Supreme / Astral/ EIC approved). 25 mm dia.

Supply & Fixing Pipe Insulation for 25 MM dia drain pipe with 9mm nitrile rubber tube (Supreme/Accoflex/Armacell/EIC Approved)

Rate should be quoted incl. of all taxes and cess.

Defect Liability period : 1 year

OVERSEAS TRADING AND SUPPLIES CORPORATION (BID ID -6306820)

STANDARD BUILDERS (BID ID -6305206)

ELEGANT POWER (BID ID -6306752)