Spl Repairs/Replacement of Overhead Line Conductor to Underground Cable including connected works at APS (SR WING) Udhampur and Provn of Security Light and connected items along Boundary Wall of Sub Area Offrs Mess Under

Amount

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes foundations of poles/stays/pipes etc .not exc 10 Sqm area on plan and getting out in soft/loose soil, complete all as specified and directed by Engr-in-charge.

Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick, complete all as specified and directed by Engr-in-charge.

Removing of excavated soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point, complete all as specified and directed by Engr-in-charge.

S&F double walled corrugated (DWC) pipe of size 120 mm including snap fit coupler conforming to IS14930 (Pt-II)/IS16205 Pt-II for protection of HT cable in under ground, complete all as specified and directed by Engr-in-charge. Make: REX/Tirupati Plastomatics Pvt Ltd/Supreme

S&F double walled corrugated (DWC) pipe of size 90 mm including snap fit coupler conforming to IS14930 (Pt-II)/IS16205 Pt-II for protection of HT cable in under ground, complete all as specified and directed by Engr-in-charge. Make: REX/Tirupati Plastomatics Pvt Ltd/Supreme

S&F double walled corrugated (DWC) pipe of size 77 mm including snap fit coupler conforming to IS14930 (Pt-II)/IS16205 Pt-II for protection of HT cable in under ground, complete all as specified and directed by Engr-in-charge. Make: REX/Tirupati Plastomatics Pvt Ltd/Supreme

Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip of wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 185 Sqmm x3.5 core, complete all as specified and directed by Engr-in-charge.

All as per ser item No 7.00 here-in-before but size 120 Sqmm x 3.5 core, complete all as specified and directed by Engr-in-charge.

All as per ser item No 7.00 here-in-before but size 95 Sqmm x 3.5 core, complete all as specified and directed by Engr-in-charge.

All as per ser item No 7.00 here-in-before but size 70 Sqmm x 3.5 core, complete all as specified and directed by Engr-in-charge.

All as per ser item No 7.00 here-in-before but size 50 Sqmm x 3.5 core, complete all as specified and directed by Engr-in-charge.

All as per ser item No 7.00 here-in-before but size 16 Sqmm x 4 core, complete all as specified and directed by Engr-in-charge.

Supply and fix cable jointing kit for 1.1 KV (Earthed) grade cable for END joint heat shrinkable type joint complete with jointing material and accessories suitable for 3.5core XLPE armoured Aluminium conductor cable of size 185 Sqmm, complete all as specified and directed by Engr-in-charge.

Supply and fix cable jointing kit for 1.1 KV grade cable for End heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured Al conductor cable of size 120 Sqmm , Indoor/Outdoor type, complete all as specified and directed by Engr-in-charge.

Supply and fix cable jointing kit for 1.1 KV grade cable for END heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured Al conductor cable of size 95 Sqmm , Indoor/Outdoor type, complete all as specified and directed by Engr-in-charge.

Supply and fix cable jointing kit for 1.1 KV grade cable for END heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured Al conductor cable of size 70 Sqmm , Indoor/Outdoor type, complete all as specified and directed by Engr-in-charge.

Supply and fix cable jointing kit for 1.1 KV grade cable for END heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured Al conductor cable of size 50 Sqmm , Indoor/Outdoor type, complete all as specified and directed by Engr-in-charge.

Supply, Installaiton, commosioning and testing Weather proof outdoor double door type bus bar chamber i.e (front & back opening), made out of 1.6 mm thick MS sheet comprising 4 Nos aluminium strip each of 300 Amps mounted on insulators with 4 No's mounting legs made out of 25mm x 25mm x 5mm angle iron grouted in PCC block of size 30cm x 30cm x 90cm (30cm depth below ground level and 60cm above ground level) in plain cement concrete M-10, type C-2 (using 40mm graded crushed stone aggregate), and connections with suitable size of aluminium thimbles, nuts, bolts & washers including cable glands at entry and outlet points including excavation and earth work, returning filling and removing of surplus soils, complete all as specified and directed by Engr-in-charge.

M&L for earthing complete with galvanized steel earth plate electrode 600 mm x 600mm x 6.0mm thick buried directly in ground ( earth pit not less than 2.25 mtr below normal ground level ) with top edge plate not less than 1.5 metre below normal ground level connected to galvanized earth strip of size 32 x 6mm as earthing lead by means of bolts, nuts, chuck nuts and washers of galvanized iron earth lead with 15 cm thick alternate layers of charcoal dust & common slat including PCC pit in PCC 1:2:4 type B-1, RCC cover made out of cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with TMT steel bars 8 mm dia @150 mm c/c both ways with suitable handle and angle iron 40 x 40 x 5 mm frame, GI medium grade watering pipe 20 mm bore and funnel with wire mesh light grade protection pipe 40mm bore up to main board complete as shown on electrical plate No 3 of MES Sch 2009 (Part-I) and testing on completion complete all as specified and directed by the Engineer-in-Charge. Note: - On testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction of Engineer-in-charge, complete all as specified and directed by Engr-in-charge.

S&F Offgrid 30W All in one solar compact street light range up-to 12000 lumen with inbuilt lithium ferro phosphate batteries, monocrystalline solar panel MPPT charge controller, complete all as specified and directed by Engr-in-charge. Make : Philips(BRP111LED30/757)/Wipro/havells.

M&L for road cuttig existing road for crossing of underground electric cable for laying of any size GI tubing including necessary excavation and earth work including repairing the same as per existing with pre mix bituminious carpet, complete all as specefied and as directed by Engr-in-charge. Note: - Width of trench shall be 15 cm and depth shall be upto 30 cm.

Supply and Laying in replacement Galvanised iron steel tubes, ISI marked light grade of size 40 mm bore for cable protection along the poles under road under drains, laid in trenches/fixed on walls/poles with suitable clamps bolts nuts etc including taking down of old unserviceble pipe, complete all as specefied and as directed by Engr-in-charge.

M&L for cement concreate 1:2:4 type D-2 (using 40 mm graded stone aggregate) as in coping etc including necessary form work and finishing the surface with cement mortar 1:4, 5mm thick finished to the portion of PCC muffs above ground level, complete all as specefied and as directed by Engr-in-charge.

M&L for PCC 1:4:8 type D-2 (using 40 mm grade stone aggregrate in foundation, mass concrate) as in foundation of poles & stay etc, complete all as specefied and as directed by Engr-in-charge.

S&F 20W LED Post top LP 07 pure polyester UV resistant powder coated, dia-cast aluminium housing with -MMA clear diffuser, for uniform ilumination, complete all as specefied and as directed by Engr-in-charge. Make : Wipro cat no : LP07-251-XXX-57-CL eqt to CG or Polycab

S&F 60 Watt LED street light with pressure die cast aluminium housing & toughened glass with IP-66 degree protection, individual LED's must have peanut lenses for better throw across & along the road with luminarie efficacy of greater than 100 lumen/Watt (Minimum lumen output of luminarie should be 6000 Lumens) color rendering (CRI) of > 75 and co-related color temperature (CCT) of 5700K (+ 500K), The luminarie should have 5 KV surge protection, PF > 0.95, and total harmonic distortion of THD < 10%, voltage range of 140-280V should be provided. Luminarie should have top maintainable driver compartment for easy access to driver during maintenance. The driver used must be a constant current driver with efficiency of > 85%. The manufactures LOGO must be embossed/Engraved in the housing of the luminarie. Manufactures to provide LM80 from source manufacturer and should have adequate testing facilities approved by ministry of science (Govt of India) to provide LM 79 report along with brackets, complete all as specefied and as directed by Engr-in-charge. Make : Wipro(Cat No - LR02-671-XXX-57-G3) Polycab or CG.

S&F OFF load change over switch FP 100 Amps, 415 Volt, 4 pole, complete all as specefied and as directed by Engr-in-charge.

S&F OFF load change over switch FP 63 Amps, 415 Volt, 4 pole, complete all as specefied and as directed by Engr-in-charge.

S&F Pressure Booster pump of capacity 0.5HP water pump with water pressure boosting 24 liter tank single phase with accessories NRV, complete all as specefied and as directed by Engr-in-charge.

MOHAN LAL AND SONS (BID ID -3257391)

M/S Builders Indias (BID ID -3257349)

Usha Engineering Co. (BID ID -3257826)

slathia construction works (BID ID -3257678)

FANGALIA TRADERS (BID ID -3247262)

M/S DHARAM & SONS ENTERPRISES (BID ID -3251917)

M/s Sahib Construction and engineers (BID ID -3256545)

shivom builders (BID ID -3251904)

EAST URBAN ENGINEERING (BID ID -3252288)

GURU KRIPA ENTERPRISES (BID ID -3252254)