GE/CHD/T-31/2026-27

Taking down Cement plaster or cement lime plaster on brick or stone walls including raking out joints, hacking for key & scrubbing down with water etc complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge. Note:- Debris will be disposed as per UT norms and Contractor will laise with UT athority for the same and rates quoted shall be deemed to include this aspect.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips complete including disposal of unserviceable rubbish outside cantt area all as specified and directed by Engineer-in-Charge. Note:- Debris will be disposed as per UT norms and Contractor will laise with UT athority for the same and rates quoted shall be deemed to include this aspect.

Repairing the edges of concrete chajjas, facias, slabs, columns & the like by providing PCC (1:2:4) type B-0 including all necessary form work and rendering 15 mm thick (average thickness) in cement mortar (1:3), after applying a coat of cement slurry @ 3 kg/ Sq. m of surface, finished even and fair, surface area not exceeding 300 mm wide, in patches including taking down swoolen/damaged plaster or concrete, complete all as specified and directed.

Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any sitution floor (including provn of support, formwork and welding of reinforcement if required with wire mesh of weight 3 kg/ sqm and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and applying two coats of weather proof acrylic emulsion paint to match with existing surfaces complete all as specified and directed.

Rendering 15 mm thick in cement mortar 1:6, on fair faces of brick or concrete surfaces , trowelled to even and smooth surface without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Rendering 15 mm thick in cement mortar 1:4 over of brick or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Rendering 10 mm thick in cement mortar 1:3, on fair face of concrete surfaces ceiling etc.at any height and removing rubbish out of premise land all as specified and directed.

Preparation of new undecorated surfaces of wall and applying two coats of interior acrylic emulsion on walls over a coat of primer at any height and removing rubbish out of MD land, complete all as specified and directed.

Preparation of old decorated brick/concrete/ plastered or unplastered surfaces of walls by brooming or by steel wire brushing, scrapping down snow soot, moulds, moss and efflorescent salts and treading oil and greasy spots, of WALLS including corinces pillars etc filling the all holes / patches with wall care putty to make surface smooth wherever required and applying one coat of interior acrylic emulsion at any height, complete all as specified and directed.

Preparation of old decorated brick/concrete/ plastered or unplastered surfaces of ceilings by brooming or by steel wire brushing, scrapping down snow soot, moulds, moss and efflorescent salts and treading oil and greasy spots, of CEILING including corinces pillars etc filling the all holes / patches with wall care putty to make surface smooth wherever required and applying one coat of interior acrylic emulsion at any height, complete all as specified and directed.