PROVISION OF CHAIN LINK FENCING AROUND COCONUT GARDEN AND HARDSTANDING FOR VEHICLE PARKING OF EMU COMPLEX AT DRDO TOWNSHIP KANCHANBAGH HYDERABAD.

Amount

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

M&L plain Cement Concrete1:4:8 type D-2 (40mm graded stone aggregate) in sub base of floors complete all as specified and as directed.

M&L Hardcore of gauge not exc. 63mm, deposited, spread and levelling in layers not exc. 15 cm thick, watered and rammed to true surface with broken stone or boulder complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L Machine pressed precast concrete interlocking paver block approved shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with grey cement and pigment laid over and including 40mm thick sand cushion layer setting and levelling with mechanical vibrator complete all as specified and as directed.

M&L Factory made chequered cement concrete tiles 30cm x 30cm x 20mm thick , set , jointed and pointed in neat cement slurry in floors with white cement and pigment over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L PCC 1:2:4 type B1, using 20mm graded stone aggregate as in road side kerb stones, coping including weathering, slightly rounded or chamfered angles and throating including use and waste of form work (straight or curved) and finished exposed surfaces fair and even complete all as specified and as directed.

M&L concrete bed to drain pipes 450mm dia with cement concrete 1:4:8, type D-2 including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and as directed.

M&L reinforced cement concrete pipes 450mm bore of pipe, class NP-2, laid in trenches and jointed complete with collars complete all as specified and as directed.

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/ loose soil complete all as specified and as directed.

M & L Brick work with flyash bricks sub-class 'B' bricks old size, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M & L rendering 15mm thick on fair faces of brick work or concrete on wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

M&L plain cement concrete 1:2:4 type B-1, (20mm graded stone aggregates) as in coping and the like including weathering, slightly rounded or chamfered angles and throating as directed including form work complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali primer complete all as specified and as directed.

S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape hand rail straight portion , drilled and contersunk for balusters , nosing to steps, struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets ( for securing chain link fencing ) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F framed work as in door or gates of angles, of other section with gusset plates, rails, brackets etc complete to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings complete all as directed.

S&F PVC coated GI chain link fencing of wire of 3.5mm thick , 3mm wire dia and 0.5mm thick hot dip PVC coating with aperture of chainlink is 50mm x 50mm complete all as specified and directed. Make: TATA WIRON PVC D-FENCE, or Techno commercially Equivalent approved by GE

S&F mild steel bolt machine made with hexagonal heads at one end and screwed at other end to be fitted with washers and one nut exc 5 but not exc 10 cm and dia of shank is 11 to 15mm complete all as directed.

S&F 10 to 12mm dia round bar as in straining rod in chain link fecning including bending, cranking, hooking including mild steel wire clips as directed

M&L for preparation of new steel surface and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

CHAVA CONSTRUCTIONS AND ELECTRICAL PROJECTS

Bismi Engineering

M/S GDR CONSTRUCTIONS

M/s Kasturi Pedda Subbaiah Enterprises/M/s K.P.S Enterprises

M/S AKSHATHA ENTERPRISES