Special Repair to CI and GI pipe lines and allied work from OH tanks of KLP-II to OTM / Adm block of KLP-II and from shopping centre to Adm block of KLP-I at Military Station Fazilka.

Amount

Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth; or n exc 10 Sqm on plan and n exc 1.5 m in depth for pipe line in soft/loose or hard soil, & getting out complete all as specified and directed by Engin-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engineer-in-Charge

Taking down of old GI/CI pipes of any size from the trenches/floors by excavating not exceeding 1.5 mtr depth all as specified and directed

Supply and fixing in replacement of DI "K9" pipes 250mm bore with spigot and socket end centrifugally cast class LA in any length, and laid in trenches. Make:- Electro steel Ltd/Jindal Pipes/Tata

Supply and fixing in replacement of DI "K9" pipes 150mm bore with spigot and socket end centrifugally cast class LA in any length, and laid in trenches, and making good the demolished drains if any all as existing size and specification all as directed by Engr-in-charge Make:- Electro steel Ltd/Jindal Pipes/Tata

Supply and fixing in replacement of DI "K7" pipes 100mm bore with spigot and socket end centrifugally cast class LA in any length, and laid in trenches. Make:- Electro steel Ltd/Jindal Pipes/Tata

Construction of brick masonary valve pit of size 900mm x900mmx900mm (internal dimension of chamber to the top of brick wall coping) including excavation and earth work in soft/loose soil, 100mm thick PCC (1:4:8) type D-2 using 40mm grade crushed stone aggregats as in lean concrete with 10mm projection beyon of external face of brick, old size, 15mm thick plaster in cm (1:4) externally down to 15cm below ground level and internally including bottom of pit and top of brick wall 50mmx50mmx6mm MS angle iron as infram and top cover 6mm thick MS sheet with handle, hold fast, pintle hinges, surface of angle to be embedeted hold fast anchored in lugs of PCC(1:2:4) type B-1 treated expossed and under surfaces of the cover and frame treated with two coat of synthetic enameled paint over red oxide primer and treating plaster surface with three coat of white wash including demolition of existing valve pit complete all as specitied and directed by Engr-in-Charge

Supply and fixing sluice valve flanged type Class PN 1.6 size 250mm bore with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.

Supply and fixing sluice valve flanged type Class PN 1.6 size 150mm bore with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.

Supply and fixing sluice valve flanged type Class PN 1.6 size 100mm bore with necessary gasket, nuts, bolts and washers etc. and jointing including testing for leakage complete all as specified and directed by Engineer – in – Charge.

Supply and fix Valves, reflux (non return) valve, flanged of class 1.6 PN, 150 mm dia complete with necessary gaskit nut bolt and washer etc. and joining including testing for leakage complete all as specified and directed by Engr - in -Charge

M&L For DI fitting for DI spigot and socketed pipes (any type, radius and angle) tapers any type,(straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs. up to 200 to 250 mm bore. complete all as specified and directed by Engineer in charge.

M&L For DI fitting for DI spigot and socketed pipes (any type, radius and angle) tapers any type,(straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs. up to 150 to 200 mm bore. complete all as specified and directed by Engineer in charge.

M&L For DI fitting for DI spigot and socketed pipes (any type, radius and angle) tapers any type,(straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs. up to 100 to 150 mm bore. complete all as specified and directed by Engineer in charge.

S&F "D" Joint with nut and bolt suitable for 150mm bore DI/CI pipes and fittings complete all as specified and as directed by Engineer-in-Charge.

M&L Bituminous premix asphaltic dense concrete 40mm consolidated thickness with 6% binder content by weight of total mix, rolled and compacted to required camber and gradient complete of approved make all as directed by Engineer -in-charge.

M&L 150mm thick PCC 1:2:4 typeB- 2, (40mm graded aggregate) as in flooring all as specified and directed.

Dismantling floor, earth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

S&F Machine pressed precast concrete interlocking paver block (Except tiles) any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade laid over 50mm thick sand cushion complete all as specified.

M & L 75 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as sub base complete.

Demolition of cement concrete (un reinforced ) of any description and in any position.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

M.B ENTERPRISES

POOJA CONSTRUCTION COMPANY