Repairs to different machines and allied works in laundry section at Govt LD Hospital Srinagar

Amount

Providing and fitting of reverse switch for drying tumbler(DS 60) having capacity 60 kg by way of dismantling the old and worn out witch from the panel and fitting of new one. The job inclides the providing of skilled labour, tools, tackles and testing of machine on full load.

Providing and applying of EP3 Grease to the nut bolts and other joint of different machines in laundary section.

Providing and fitting of Drain Pipe (MS C class) (65 mm nominal dia) of washing machine by way of dismantling the old and damaged one and fitting of new one. The job includes providing of skilled labour tools, tackles and testing of leakages if any.

Providing and fitting of flange(MS) along with new butterfly valve(DISC MATERIAL-SS) having internal dia of 65 mm to washing machine(stefab make) at outlet to above drain pipe by way of dismantling the old and damaged flange and butterfly valve and other accessories and fitting of new one, the job includes providing of skilled tools, tackles and labour to get machine fit for operation.(complete job)

Various repairs to hydo exatractor by way of dismantling the hydro extractor and motor from the foundation with the help of chain pulley block and refitting the same after making following repairs

Repairs to the braking system of HX 25

Providing and fitting of spring balancer by way of replacing springs as per sample with new one

providing and fitting of rubber buffer/vibration pad by way of replacing the old and damaged rubber buffer with new one.

Repairs to over flow tank installed in attic of old building by way of dismantling the pipe connected to the tank and blocking/blinding of tank from both side(input and output) with welding method. The job includes providng of all consumables, skilled tools, tackles and labours by firm.

Providing and fitting of automatic drain valve of washing machine(STEFAB MAKE LXS 60) along with all accessories by way of dismantling the old and worn out valve and fitting of new one. The job includes providing of skilled tools and tackles and testing of valve at full load.

Providing and fitting of 3 inch dia L. shaped drain hose pipe to STEFAB MAKE(LXS 60) washing machine along with hose clamp for LX 60 model all fitting by way of dismantling the old and worn out and fitting of new one. The job includes providing of all consumables, tools and tackles to complete the job.

Repairs to idler shaft(SS) pertaining to LXS 60 washing machine by way of dismantling the un balanced shaft from the housing and refitting of repaired one, the job includes transportating it from site(laundary) to the workshop. The job includes dismanlting of ball bearing from the shaft by mechanical means refabrication of ball bearing seat on which new ball bearing can be seated, the job includes putting up the shaft on lathe machine checking it's alignment with dial gauge and then realigning it by way of material depostion, heating, grinding, turning etc so to get shaft balanced and fit for working. the job further includes providing and fitting of new ball bearing on balanced shaft as per sample. the job also includes providing of skilled tools, tackles and consumables which are required.

Providing and fitting of 1 inch ND SS ball valve for steam purposes by way of dismantling the old and worn out valve and fitting of new one

Providing and fitting of 18 amp 3 pole contactor for LXS-60 by way of dismantling the old one and refitting of new one. The job includes providing of skilled tools, tackles and labour to complete the whole job and should be confirming to IS/IEC 60947-4-1

Providing and fitting auxiliary block for main 18 amp 3 pole contactor LXS-60 by way of dismantling the old one and refitting of new one. The job includes providing of skilled tools, tackles and labour to the whole job, and should be confirming to IS/IEC 60947-4-1

Providing and fitting of mechanical timer(0-60min) for LXS-60 by way of dismantling the old one and refitting of new one. The job includes providing of skilled tools, tackles and labour to complete the whole job and should be confirming to IS/IEC 60947-4-1

Providing and fitting of motor safety device(VSPD1) which includes(single phase preventer, phase reverse sequencing and voltage unbalancing) for LX 60 washing machine(STEFAB MAKE) by way dismantling old and damage one and fitting of new one. The job includes providing of skilled tools, tackles and labour to complete the whole job. and should be confirming to IS/IEC 60947-4-1

Providing and fitting of reverse timer pertaining to LX60 washing machine by way of dismantling the old and wornout timer and fitting of new one The job includes providing of skilled tools, tackles and labour to complete the whole job. and should be confirming to IS/IEC 60947-4 1

Complete rewinding of the motor of capacity 1H.P/0.75 kw,3 phase 50 hz by way of replacing damaged copper wiring of suitable gauge copper wiring as per existing pitch and replacing the motor bearing with new one as per sample. The job included p/f of lathoroid sheets, bamboo sticks, varnishing compound and other consumable items required for carrying out such job, the job also included disconnecting of the motor from the foundation attaced to drying tumbler and shifting it to the workshop by mechanical transport for rewinding, after carrying the necessary repairs and shifting it back to the site and installing the same.the job also includes the checking the performance of thes ame on full load and idle load(the firm has to quoteless by scrap value of the damaged copper wiring)

M/s SIMAR ENTERPRISES