SPECIAL REPAIR TO CERTAIN BUILDINGS UNDER AGE B/R-II AREA AT PANAGARH MIL STN UNDER GE PANAGARH

Amount

B/R Items

Dismantling floor, hearth or wall tiling (fixed at any portion but not backing) including cement mortar bedding and removing and removing rubbish off the premises (outside MD land)

M&L for Vitrified Ceramic tiles dark shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified & directed.

All as per item No. 1.002 above but on vertical walls including backing coat 15mm in CM (1:4) all as specified & directed.

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured (Dark Colour) and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed

Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 sqm in floors etc , over & including 15 mm thick cement mortar (1:6) screed etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match

Material and labour for glazed ceramic coloured tiles in vertical surfaces of size 350x250x7mm/450x600x7mm thick quality not less than group II, straight edge, k, as on skirting , dados, walls etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:6 complete all as specified and directed.

Non-skid ceramic, straight cut/joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.06 Sq.m but not exceeding 0.16 Sq.m, in floors & skirting etc. over & including 15 mm thick cement mortar (1:4) screed, set and jointed with grey cement slurry & pointed with grout of matching shade,including dismantling of tiles, complete, all as specifie.

Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.

M&L for fly ash brick straight or curved on plan exc 6 mtr mean redious built in CM 1:6 all as specified old size bricks

M&L Brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:4) all as specified.

M&L Brick work using old size bricks (EXCEPT BRICKS) straight or curved on plan exceeding 6.00 metre mean radius, built in cement mortar (1:6 ) all as specified.

M&L for flyash Brickwork straight or curved on plan to any radius in half brick thick walls built inin cement mortar (1:6) all as specified.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

M&L Rendering 20 mm thick cement plaster in CM 1:4 on external fair faces of brick/concrete work surfaces finished even and smooth (without using extra cement) incl WPC (WPC will be measured and paid separately).

M&L Rendering 20 mm thick in cement plaster in two coats (each coat 10 mm thick) on fair faces of brick work in cement mortar 1:4, finished even and smooth (without using extra cement) on walls in complete all as specified and as directed.

Supply only water proofing compound, complete all as specified.

Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:6), complete all as specified.

Rendering 10 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling/chajja in cement mortar (1:3), complete all as specified.

M&L for Two coats of 0il bound destemper on new wall surface including chalk whiting, preparation to distempering complete all as specified.

M&L Washing rubbing down and stopping of old distampered on wall surfaces including brooming down or steel wire brushing scrapping down smoke soot, moulds moss and efforescent salts and trading oil and greasy spots and applying one coat of oil bound distemper on wall surfaces all as specified and directed by Engineer-in-Charge

M&L for Two coats of 0il bound destemper on new ceiling surface including chalk whiting, preparation to distempering complete all as specified.

M&L Washing rubbing down and stopping of old distampered on ceilling surfaces including brooming down or steel wire brushing scrapping down smoke soot, moulds moss and efforescent salts and trading oil and greasy spots and applying one coat of oil bound distemper on ceilling surfaces all as specified and directed by Engineer-in-Charge

Complete removal of existing surfaces and preparation old plasterd or unplastered surfaces of walls and applying two coat of weather proof acrylic emusion paint, exterior grade complete all as specifeid and directed by Enger-in-charge.

M & L Preparation New plasterd or unplastered surfaces of walls and applying two coat of weather proof acrylic emusion paint including chalk whiting, exterior grade complete all as specifeid and directed by Enger-in-charge.

M & L applying 3 mm thick wall care putty on wall surfaces complete all as directed.

Dismantling of wall or ceilling boards of any thicness including cover fillets.

S&F 605mm x 605mm Anodised aluminium snap grid frame work for false ceiling with all necessary aluminum angle & Tee arrangement with and incl fixing cleats screws etc all as specified.

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified.

S&F for 4mm thick 'E' board (non asbestos fibre) plain building boards fixed in aluminum frame work in ceiling flat or sloping with screws complete all as specified.

S & F roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Gde-E-250) quality-A

M & L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

M & L Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces

S & F Anodised aluminium door shutters, , aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprane packing, handles 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc. complete all as specified

S & F Anodised aluminium ,window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised etc complete all as specified

S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq.m in each pane

Hacking out old broken glass ( any thickness, size, quality or discription) from metal/wooden frames fixed with pin, beading or oil putty

S & F Solar control film 50 micron relfective type sticked to glass panes as per instructions of manufacturers complete all as specified and directed.

S&F for anodised Aluminium frame for doors, windows & ventilators (moveable louvers type) with one or more rebates including joining cleat for fixing etc. Rubber gasketing all round the panels/ shutters to fix glass, PVC gasketing in all channels, locking arrangement, complete all as specified.

Door closer hydraulically regulated, alluminium body, designation No. 3 universal type, suitable for door shutters upto 851 to 1000 mm in width and of weight between 60 to 80 kg, ISI marked, complete all as specified.

S & F Mortice lock, alluminium body, 4 lever, 150 mm size, vertical type with two keys complete all as specified.

S&F Aluminium wire mesh 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminiun beads complete all as specified and directed by EIC

S&F aluminum anodised GRILL (Deco grill DG 103 of M/s Associated Profiles & Aluminum Ltd) fixed with suifable 'F' section No. 8584 15.30 x 23.40 x 1.40mm fabricated and rivetted to aluminum windows, complete all as specified and directed by Engr-in-charge.

M&L for factory made solid PVC moulded door shutter 28 to 30 mm thick with wood free EPS(Stiles ) with 2,4, or 6 raised panel design with 2 mm thick moulded PVC sheet on the front and back face, supplying and fixing in frame at site as per specication complete all as specified.

M&L for Solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixing in existing opening including necessary joints and concerte all as specified and directed

S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 150 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified.

S&F Aluminium handles, cast type anodized of size 150 mm, ISI marked, complete all as specified.

S&F Butt hinges, medium weight, cold rolled mild steel and fixed with screws or with welding to existing MS frames, 100 mm size, ISI marked, complete all as specified.

Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified.

Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutter(s) (without taking off shutters from the frame), including removing to store, complete all as specified.

Excavation in trenches not exc 1.5m wide and not exc 1.5m deep for foundation etc or for shafts n.ecx 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil all as specified.

M & L for sand filling under floors or in foundation including watering and consolidation all as specified.

M&L for PCC 1:4:8 type D-2 (using 40mm graded aggregates) as in bed concrete for foundation filling & mass concrete.

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point.

Demolition of reinforced cement concrete any thickness all as specified.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; exc. 200m thick (Horizontal or sloping) Rough finished surfaces of concrete flat

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter

M&L for damp proof course 40mm thk in cement concrete 1:2:4 type B-0 to horizontal or vertical surfaces including necessary form work

M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L for Chequered Cement concrete tiles 20cm x 20cm x 25mm thick, set jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in cement mortar 1:4, with grey cement and pigment

M & L for hardcore of broken bricks of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

Demolition of Plain cement concrete below or above ground level n.exc 15 cm thickness and removal of soil to outside MD land as directed by Engr-in-Charge

Demolition of cement concrete (un-reinforced) roofs surfaces of any description and in any position not otherwise specifically provided for.

Demolition of cement concrete (un-reinforced) not exceeding 15 cm thickness of any description and in any position not otherwise specifically provided for.

M&L PCC 1:2:4 type B-2 (using 20m graded crushed stone aggregate) as in roof padding, finished fair and even without using extra cement, complete all as specified and directed.

M&L for providing APP based membrane course roof treatment in layers with following provisions :- (i) 20 mm thick (average) screed bed or bedding layer in CM (1:6) and finished the surface even & smooth without using extra cement on top of the roof surface. (ii) Applying one coat of bituminous primer, polymerized primer oil based coat, evenly @ 0.3 Kg/Sqm as priming coat to the prepared surfaces, till the surfaces is properly impregnated and the solvent oil in the based primer shall be allowed to evaporated completely. (iii) Applying APP based pre fabricated with non-woven polyester reinforced membrane stabilised with fibre glass strands & top with grey mineral slates, not less than 3mm thick and not less than 3 Kg/Sqm by torch application method.

Cutting holes exc 150 Sqcm but n.exc 400Sqcm into or through PCC floor and making good in cement concrete 1:2:4 type B-l as required all as specified & directed.

S&F Venetian blinds of polyfiber synthetic material in vertical alignement with one side closing and 90 digree flap movement with closing at one end with flap width 60mm to 75mm incl bottom metalic weightes and attached with proper assembly all as specified & direcetd.

Materials and labour for 20mm thick black granite slab (width and length as per site requirement) bedded over including 15mm thick screed bed or bedding layers in CM 1:4 including making holes and bullnozed moulding on edges and jointed with cement slurry and pointed with white cement with the admixture of pigment to match complete.

Rounding of / moulding to edge (half round) of granite stone of any description including rubbing and polishing, complete all as specified.

S &F vitreous china Wash down water closet (Padestal pattern) white with P or S trap including plastic water closet seat & cover mild steel chromium plated or aluminised hinging device and jet, fushing cistern low or high level, 32mm dia polyethylene fush pipe etc compete all as specified.(excluding cost of flush tank)

S&F decorative corner glass shelf round 6mm thick ,200mm size with raling 25mm high in bath room ,fixed with "D' type bracket on wall of approved and petten all as specified.

S&F Stainless steel towel ring dia 150mm approved make and pattern, fixed to walls with screws complete all as specified and directed.

S&F PVC low level flushing cistern, white (to match the EWC/IWC) including brackets 10 litre capacity COMMANDER/SLIM LINE, with inlet ball valve float, handle,flush pipe etc. complete fixed in repairs.

S&F in repair wash hand basin vitreous chaina ,coloured ,over shape ,counter type of size 550x400mm including sancer tap super with cotrol box new cat No-F6010102. make-cera complete all as specified.

M&L cast iron Floor trap /nahni trap100mm with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4).

S & F 15mm dia PVC connection 450mm long of approved make fancy type as specified and directed by Engineer in charge

S&F Stainless steel Soap dish fancy type as specified and directed by Engineer in charge

S & F Toilet paper holder of viterous china box type (white) fixed to walls with chromium plated (CP) brass screws Fixed in repair

S & F Jet Spray CP copper cast alloy fancy type having PVC tube 750mm long SS nut bolts at either ends of approved make

S&F 100 mm cast iron sanitary connection socket to fit WC out-let

S&F in repairs PVC sheet cabinet, made out 5mm thick sheet with openable shutter and mirror of thicknes not les than 2mm with suitable compartment in side as directed of size 450mmx350mmx120mm fixed to wall chromium plated brass screws complete all as specified.(make- prayag/atul/)

S&F in repair Stainless steel towel rail 20mm dia D type solid 60cm long between flanges of approved make and pattern, fixed to walls with screws complete all as specified and directed by Engr-in -Charge.

S&F Consealed stop valve,/anglevalve cast copper alloy, screwed down, high pressure with handle, chromium plated, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe,in repair.

S & F Alumn Curtain Rods 25mm dia Decorative type with a pair of brackets, powder coated of approved pattern and colour, complete all as specified

Demolition PVC rain water 110mm dia cement mortar & removing from site completed all as specified & directed.

Supply and fixing as in repair 110mm dia PVC rain water pipe fixed to wall set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc complete all as specified and directed.

Supply and fixing as in repair PVC bends plain (any radius) for 110mm bore PVC pipes complete all as specified and directed.

S&F Tubes 15 mm bore, ‘medium grade’, galvanized with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified.

S&F Tubes 20 mm bore, ‘medium grade’, galvanized with all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified.

S&F Bib taps, cast copper alloy with handle, chromium plated fancy type, long body with wall flange screwed down, suitable for 15 mm bore pipe, IN REPAIR Make : Jaquar

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified.

M&L as in repair Double leg aluminium anodised door stopper with rubber foot , ISI marked and fixed with standard aluminium screws complete all as specified.

S&F in repair vitreous chaina bowl urinal with sansor,flat back ,snow white with grating and union for discharge pipe (excluding flushing cisten ,flush pipe and wast pipe ) fixed with complete items all as specified. Make - CERA cat part No-5005A or equivalnt in Hindware

S&F 10mm thick toughned Glass sheet,with diamond cut edge area exc 1sqm but n-exc 1.5 sqm each panes including all fittings such as (hinge, handels etc)and grinding,polishing and rounding of edge and fixed to panel/frame on wall complete all as specified directed by Engr- in charge..

S & F CP Stop valve, any description, suitable for 15mm bore pipe as in repairs complete all as specified

Dismantling of cast iron pipes with all fittings and fixing accessories, jointed in cement mortar 50-100 mm bore, at any location, complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 (using 40 mm agg.) in plinth protection fineshed even and smooth without using extra cement complete all as specified.

M&L for providing cement concrete type D2, 1:4:8 using 20 mm graded stone aggregate, as in mass concrete etc., complete all as specified and aa directed

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded aggregate) in Chajjas.

Drilling holes of suitable size for passing tubes of any description into or through RCC cooking platform slab with stone or brick wall etc. and the like of thickness not more than 250 mm by electric drilling machine and making good complete.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, in brick walls, complete all as specified.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, complete all as specified.

M&L PCC 1:2:4 type B-1 (using 20m graded aggregate) as in roof kerb or chamfered of edges complete all as specified and directed.

M&L Rendering 15mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on ceilling surface in cement mortar (1:4), complete all as specified.

M&L Rendering 15mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on ceilling surface in cement mortar (1:3), complete all as specified.

M & L for applying three coat of white wash on ceilling new surface of complete all as directed by Engineer in Charge

M & L for applying TWO coat of white wash on ceilling old surface of complete all as directed by Engineer in Charge

M & L for applying two coat of white wash on old surface of wall complete all as directed by Engineer in Charge

M&L for two coats of Oil bound distemper on old wall surface and preparation to oil bound distempering including complete preparation of existing surfaces complete all as specified.

M&L for two coats of Oil bound distemper on wall surface including 3 mm thick wall care putty over chalk whiting and completely removal of existing surface and apply to oil bound distempering complete all as specified.

Material and labour for preparation of old plastered surfaces of walls and applying two coats of cement base paint complete all as specified and directed.

Material and labour for preparation of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint over chalk whiting complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint over alkali resistance primer complete all as specified and directed.

M&L 25 mm thick, cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate, without using extra cement , as in floors, complete all as specified.

Material and labour for glazed ceramic coloured tiles in vertical surfaces of size 350x250x7mm/450x600x7mm thick quality not less than group II, straight edge, k, as on skirting , dados, walls etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Non-skid ceramic, straight cut/joint free, 7-8 mm thick colored tiles, area of each tile exceeding 0.11 Sq.m but not exceeding 0.18 Sq.m, in floors & skirting etc. over & including 15 mm thick cement mortar (1:6) screed, set and jointed with grey cement slurry & pointed with grout of matching shade, complete, all as specified.

M&L Factory made PCC type M-35 paving interlocking tiles pre- polished finished, ISI marked, with grey cement & pigment, 60 mm thick, of shape approved by GE, in paths, set, jointed and pointed with grey cement slurry over .

M & L for hardcore broken stone or boulder of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

Taking down shutters of any description not exceeding 1 Sq. m each, including stacking at directed location for refixing and/or removing to store, complete all as specified.

Taking down shutters of any description exc 1sqm but not exceeding 2 Sq. m each, including stacking at directed location for refixing and/or removing to store, complete all as specified.

S&F of 35mm th 2nd class hard wood, glazed & skeleton shutters, open rebated & prepared to receive glass, (two panel to receive wire gauge) gauge etc, eges of framing plain, chamfered as rounded fitted with cut and mitere beads for securing etc complete.

Factory made, 35 mm thick, panelled shutter second class hard wood, plain framed, hammer marked, with lock rail . The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

Factory made, 35 mm thick, skeleton shutter second class hard wood, plain framed, hammer marked, with lock rail . The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.

S&F Factory made, flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 25 mm thick, ISI marked

Material and labour for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail includning butt hinges.

S&F Aluminium alloy, anodized, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium, 250 mm long and dia of rod not less than 16 mm, ISI marked, complete all as specified.

S&F Hasp and staple 100mm of aluminimum anodised with hinges including bolt to hinge plate and fixed with screws

S&F stainless mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified.

S&F Drapery rod (conduit) of dia not less than 25 mm having a corrugated virgin PVC extrusion on it finials of approved shade with standard MS powder coated/ brackets, fixed to walls with rawl plugs and steel screws complete.

Framed work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-410-O or Fe-310-O, complete all as specified.

Mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Supply and fixing steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazinjg bars, dovetailed or welded, including one shop coat of red oxide zinc chrome primer.

All as per Item No. 1.139 but without glazing bars.

Factory made steel ventilator with top hung shutters, dovetailed or welded including hinges, steel handles, etc. as shown with fixed type including one shop coat of red oxide zinc chrome primer, IN REPAIRS, complete all as specified.

Two coat of synthetic enamel paint over old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete all as specified.

Two coats of synthetic enamel paint over & including a coat of pink primer over new wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete all as specified.

Plain Sheet glass 4 mm thick, ordinary quality and glazing with oil pane putty in squares not exceeding 0.5 Sq. mm in each pane

Figured glass, 4 mm thick, pin head type and glazing with oil putty in squares not exceeding 0.5 sq. m in each pane,complete all as specified.

Tubes 15 mm bore, ‘medium grade’, galvanized with all fittings (Except pipe) and fixed complete to walls and ceilings or laid in floors, complete all as specified.

S&F Bib taps, cast copper alloy with handle, chromium plated fancy type, short body with wall flange screwed down, suitable for 15 mm bore pipe, IN REPAIR

S&F Cast copper alloy, chromium plated towel rail, complete.

S&F Cast copper alloy, chromium plated long neck pillar cock, suitable for 15 mm bore pipe, IN REPAIR, complete.

S&F Waste coupling of PTMT, for WHB any colour half or full threaded suitable for 32 mm size discharge pipe (Minimum weight 45 gm) IN REPAIR, complete all as specified.

PVC waste pipe 800 mm long suitable for 32 mm dia waste coupling, IN REPAIR, complete all as specified.

S&F CP Swivel shower arm 15mm size,195 mm long with bend of 45 degree with flange of fixing with 15mm pipe (Minimum weight 40 gm) IN REPAIR, complete all as specified.

S&F PTMT shelf 450 mm x 124 mm any colour with brass chromium plated screws & PVC rawl plugs (Minimum weight 300 gm) IN REPAIR, complete all as specified.

S&F Hat and coat hooks, solid body Aluminium 175mm to 250 mm fixed to wall with screw and rawl plugs, fixed as in repair complete

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm IN REPAIR, complete all as specified.

S&F Cast iron soil, waste and vent pipes, spun type, 75mm ISI marked (IS:3989), in any length with or without ears, with cement joints, fixed to walls with and including mild steel clamps, complete all as

S&F Cast iron soil, waste and vent pipes, spun type, 100mm ISI marked (IS:3989), in any length with or without ears, with cement joints, fixed to walls with and including mild steel clamps, complete all as

S&F Cast iron bends (any radius), diminishing pieces or tapers (largrer bore measured), suitable for 75 mm bore spun pipes, ISI marked

S&F Cast iron bends (any radius), diminishing pieces or tapers (largrer bore measured), suitable for 100 mm bore spun pipes, ISI marked

S&F Cast iron 'P' or 'S' trap, ISI marked, suitable for 100 mm bore CI spun pipes IN REPAIR, complete all as specified.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore, including jointing to waste pipe set in cement concrete type B-1(1:2:4) of size 200 mm x 200 mm x 250 mm, IN REPAIR, complete all as specified.

S&F in repair kitchen sink made of stainless steel 1mm thick with plugs, washers and wastes; including bedding in cement mortar & providing cantilever brackets and west pipe, overall size 495mm x 420mm and bowl size 410mmx 330mm x160mm complete all as specified.

S&F Kitchen plate rack made of stainless steel not less than 1mm thick with fixing acessories,of size 900mm x 900mm x 250mm, IN REPAIR, complete all as specified.

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) IN REPAIR, complete all as specified.

S&F 10 ltr capacity PVC flushing cistern syphonic action type white dual flush ISI (IS 7231) marked with flush pipe in repair complete with all fixing arrangements.

S&F Vitreous China wash basin, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts, IN REPAIR, complete.

S&F Low density polythene pipes of dia 50mm bore (LDPE) of pressure rating 6 Kgf/cm2 fixed complete to walls, ceiling or in floor etc.

Form work to sides and soffits of floor roof beams, beam haunching , girders, bressummers lintels, cantilevers, shelves including sup-ports, edges, over hangs, etc also splays between floors and beams , etc

Dismantaling ( AC corrugated,semicorugated) sheet in roofcovering complete all as spcified.

M&L plain solid straight chowkats second class hard wood and frame,wrought ,framed rebated on the solid ,rounded or chamfered put together with glue pinnedat jpints complete all as specified.

S&F aluminium anodised handle of extruded section of length 150mm complete all as specified.

S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy

M&L cutting holes in brick wall exc half brick but not exc one brick for inserting hold fast and macking good dismanteled portaion in cm 1:4or cement concret 1:2:4 type B-I built in cm complete all as specified.

S&F 4mm thick glass sheet ordinary quality and glazing with in square, n exc 0.5 Sqm in each pane, fixed to Aluminium windows/ventilator in repairs.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples all as specified.

S&F in repair mild steel spring for doors 300mm,ordinary rat rail rod pattren springs including roller and roller plate complete all as specified.

Demolition of stone slab and tiles of any description or thickness in floor, etc laid dry or laid dry and pointed and removing of debries of M D land

M&L for 25mm thick cement concrete type B1 1:2:4 (12.5mm graded agg) as sub base and over 15mm thick screed bed in cm in 1:4 complete all as specified.

M&L for Non skid coloured ceramic tiles 7to 8mm thick (squre/rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm in floors etc as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified.

All as per Item No. 1.180 but for skirting/dado and over rendring 10m thick in CM (1:4) on wall surfaces complete as specified.

Dismantling wrought iorn or mild steel work of any description.

S&F rolled mild steel angle iorn or tee section Fe 410W (grade250),quality B framed work as in roof covering ,trusses ,purlin ,rails and fasterning and heave bracket frame in (beam,tee,angle, channel of flat section including distence pieces, cleats etc incl cutting to dead length where reqired ,notching, drilling, fitting,riviting and or wellding or connecting with bolts and nuts (including rivits or bolts and nuts)and fixing complecte all as specified.

M&L for one coats of synthetic enamel paint of steel based surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces complete all as specified.

M&L for cement concrete type B0 1:2:4 (12.5mmgraded aggregade) for coping,plinth course etc complete all as specified.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6), using water proofing compound complete all as specified.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), using water proofing compound complete all as specified.

S&F 4 mm thick false ceiling (non asbestos fiber) plain building boards fixed in aluminium frame work in ceilling flat or sloping with screw complete all as specified.

S&F 8mm thick false ceiling (non asbestos fiber) plain building boards fixed in aluminium frame work in ceilling flat or sloping with screw complete all as specified.

M&L Non skid coloured ceramic tiles 7 to 8mm thick (squre/rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc as in floors over scred bed 15mm thick in cm 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (squre/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm in floors etc. as in floors over scred bed 15mm thick in cm 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified.

M&L for framed work in doors or gate of angle or other section with gusset plate complete drill for fixing of steel sheeting or other covering etc complete all as specified.

S&F plain mild steel 2mm thick sheet for door shutter insteped flashing/welding complete all as specified.

Material and labour for preparation of new plaster wall /ceilling surfaces and applying two coats of oil bound distemper with one coat primer complete all as specified and directed.

M & L for 100 mm thick cement concrete type D2 1:4:8 (40mm graded aggregade) as in sub base complete all as specified.

M &L Two coats of white washing on wall surfaces complete all as specified.

Grating with or without hole of PTMT (Minimum weight 40 gm) and fitting of shade matching to tiles/floor, fixed with white cement including matching shade pigment complete all as specified.

S&F gun metal ,globe or gate valves with iorn wheel ,screwed for iorn pipe complete all as specified.

S&F mild steel flat iorn for hold fast inserted in brick wall etc small article complete all as specified.

S&F in repair vitreous chaina urinal ,bowl type (bac or corner wall type ) complete including providing and fixing plugs ,beding urinal against wall nin cement mortor 1:2 securing urinal to plug with and long bars screw ,pointing around urinal back in cement fixing to flush pipe ,grating,and union for discharge pipe complete all as specified.

M&L Glazed white ceramic colour tiles of size 300x200x 6 to 7mm laid on vertical surface such as dado/skirting over 10mm rendring im CM 1:4 cement mortar bed set jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and as directed .

M&L Reinforced concrete pipes 150mm bore class NP2,laid and jointed complete with collars all as specified.

M&L cement concrete bed to drain pipes including packing under ,and hunching against the sides of pipes after they laid and tested complete all as specified.

M&L for RCC in type B-0 1:2:4 (12.5mm graded aggregade) such as cover slab and similar work complete all as specified.

E/M Items

Taking down carefully aluminium conductor point wiring (light,fan,socket or power) complete including fittings such as switches,ceiling roses, pendants, regulators ,sockets etc. and removing (except those to be reused shall be kept in safe custody at the site ) and making good disturbed surfaces of walls, floors etc.to match with the existing complete all as specified.

Material and labour point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including Modular pressed steel terminal switch boxes of different module and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FR PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

All as per item No.2 above but One 3 pin 5 Amps socket out let points on independent board.

All as per item No.2 above but 5 Amp socket on same board with other switches.

Material and labour wiring for 15 Amps socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including Modular pressed steel terminal switch boxes of diffrent module and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified.

Supply and fixed Modular switch 1 way 6 A, 1 module complete all as specified.

Supply and fixed Modular socket 6 A -2/3 pin combined, 2 Module complete all as specified.

Supply and fixed Modular Switch socket Combination 16A, 6 pin, 3 module complete all as specified.

Supply and fixed Modular white cover plate with frame 2 module complete all as specified.

Supply and fixed Modular white cover plate with frame 3 module complete all as specified.

Supply and fixed Modular white cover plate with frame 6 module complete all as specified.

Supply and fixed Modular white cover plate with frame 8 module complete all as specified.

Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified.

Supply & fixed Modular fan regulator 120 W 2 module suitable for 230 Volts AC complete all as specified.

Supply & fix Modular 20 Amps Power unit enclosure single pole and neutral with two pin and earth plug complete all as specified.

Supplying and fixing two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked), concealed, including 6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified. (Note : Cutting chases for conceal conduit in walls / ceiling and making good to match with the existing surface shall be deemed included in unit rate of this item.)

Supply and fixed security light fittings 25 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as directed. Make : Bajaj / Crompton / Philips

Supply and fixed in reapir 20 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 20 watt,6000K including necessary connection complete all as specified and directed.

Supply and fixed recessed mounted 2' x 2 ' LED luminaire 42 watts for grid ceiling minimumm lumen output 100 lumen/Watt, pre-treated CRCA frame powder coated with diffused Profied including necessary connection complete all as specified and directed.

Supply and fixed 9 W LED light fitting wall mounted batten 2ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 9 watt , 6000K including necessary connection complete all as specified and directed.

Supply and fixed Bldg security light bracket made out of GI pipe light grade 25 mm dia 1.5 mtr long bent to required shape as directed and fixed to pole complete with painting and including two set of 20x3mm FI clamps and fixing arrangement such as nuts, bolts and washers complete in all respect or as specified and as directed.

Supply and fixed epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

Supply and fixed MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fixed MCB TPN 63 Amps, 'C' series 10kA, 415 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.

Taking down existing unserviceable service earth continuity conductor or main earthing lead and supply and fixed 4 mm dia GI earth lead with clamp, connection complete all as specified and directed.

Supply & fixing ceiling fan 1200mm size , star 5 rated, ISI mark, 240V, 50 Hz all as specified and directed.

Supply & fixing PVC Exhaust ventilation fan of sweep 250 mm sweep, 230volt AC complete with louver and all asssesories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing connected with rwin core twisted flexible copper conductor (23/0.0076) of size complete all as directed by Engr-in-Charge.

Supply, laying / fixing / connecting, testing and commissioning of 35 Sqmm x 3.5 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge for the following ratings Note:- (i) Excavation,sand cushioning,brick will be measured and paid separtely.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables, pipes etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . Note :- Punned thickness 18 cm shall only be considered for payment

Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed by the Engr-in-Charge.

M & L for parallal boring under roads in conventional method without disturbing the top surface of the road for passing of cable protection pipe etc complete all as specified and directed.

S&F Pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified.

Material and labour wiring for 15 Amps socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified.

Supply and fixed switch piano flush type, single pole , 6 Amps, one way complete all as specified.

Supply and fixed switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified.

S&F socket outlets 2 in 1, 5/6 Amps flush type230/240 V complete all as specified and as directed .( For Same Board only)

Supply and fixed switch socket combination 2 in 1 , 6 pin , (16 Amps) flush type controlled by one switch complete all as specified.

Supply and fixed switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified.

Supply & fixed stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .

Supplying and fixing two single core, 6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC concealed conduits (ISI marked) including 6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified.

Supply and fixed epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 415 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

Supply & fixed Modular type 32 Amps power unit combine with on/off switch enclosure single pole and neutral with two pin and earth socket complete all as specified and directed.

Supply & fixing PVC plastic Exhaust ventilation fan of sweep 250mm complete all as directed by Engr-in-Charge.

Supply & fixed Bell push , flush type , 5 amp complete all as specified.

Supply & fixed Buzzer, Ding dong, AC 230 Volts, single pole 230 volts all as specified and directed.

Supply & fixed lamp holder, PVC/polycarbonate type with back plate straight or anfular suitable for batten fittings complete all as specified.

Supply and fixed Surface mounted type decorative light fitting 1 x 12W LED 6k 230V AC, 50Hz complete with all accessories complete all as specified and directed.

Supply and fixed LED Bulb 12 Watt suitable for baten holder complete all as specified and directed.

Supply and fixed in repair bracket made out of galvanized tube 25mm dia bore (light grade) 1.20 meter long, and band as required,with MS clamps,nuts and boltswith two coat of red primer and one coat of sliver paint complete all as specified and directed.

Supply and fixed in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

Supply and fixed in repairs epoxy powder coated sheet metal enclosure for DBs, double door (when MCBs to be used), Single pole and neutral 240 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as directed.

S & F ventilating exhaust fan 300 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size all as directed.Make : Havells/Bajaj/Orient

Taking down of AC ceiling fan of any sweep & any height and opening the fan and oiling, greasing and replacement of unserviceable accessories and servicing, complete overhauling and re-assembling and testing complete for efficient functioning and hanging it back in position including provn of 0.5 Sqmm copper flexible twin twisted cable (length not exceeding 0.5 metre) from ceiling rose to fan as directed by the Engr-in-Charge. (Note : Accessories such as Capacitor shall be measured and paid under relavtive item here-in-after).

M & L for painting of ceiling fans upto 1400mm sweep carefully, dismantling fan blades and paint with one coat of synthetic enamel paint including filling cavities with filler after cleaning all dust etc complete all as directed.

Supply only capacitor 2.5 MFD all as specified and directed by Engr - in -charge

S&F rotational moulded polyethylene water storage tanks (Cylindrical, vertical with closed top with three layered) confirming to relevent IS complete including provision of all inlet outlet overflow and drain pipe fitting complete including taking down old unserviceable tank, all as specified and directed by Engineer in Charge capacity 500 Ltrs.

Supply and fixing of high pressure PTMT float valve with epoxy coated alluminium rod and high density polythelene ball screwed for iron pipe 25 mm dia with fly nut complete including taking down old unserviceable float valve.

M&L for 25 mm bore gate valve cast copper alloy screwed down high pressure with clutch handle screwed both ends for Iron pipe complete including taking down old unserviceable gate valve all as directed.

Suplly and fix in repair 25 mm bore GI Tubing medium grade in Trenches/ Floor/Pillar and connection including fitting like socket /Union/Tee/Reducer Nipple etc complete all as per specified and directed.

S&F Metal Exhaust ventilation fan of sweep 300 mm complete all as specified and as directed by Engr-in-Charge.

S&F PVC insulated unsheathed 1100 volts grade twin core service cable 10 sqmm 2 core complete all as specified and as directed by Engr-in-Charge.

SCHEDULE OF CREDIT

BABY ENGINEERING ELECTRICAL MECHANICAL STORES

Anmol Yash S.D. Construction Pvt. Ltd.

M/S AJIT KUMAR KONAR AND SUBHAS CHANDRA KONAR

UNITED BUILDERS