SPECIAL REPAIR TO BLDG NO CB 317 TO CB 322 06 X CK HOUSES AND CB 323 AND CB 324 02 X DINNING HALLS INCLUDING SEWAGE SYSTEM IN DEMO BN UNDER GE MIS MHOW

Amount

Demolition of cement concrete n.exc 15cm in depth of any description and any position not otherwise specifically provided (below or above ground level) and removing debris to a distance n.exc 500 m complete all as specified and directed .

All as per ser. item No. 1 but exc 15 cm thickness and above ground floors.

M&L for 75 mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection finishing the surfaces even and fair without using extra cement including making joint at every 3 m interval and at corner and filled with mixture of bitumen and sand and laid in alternative bays including necessary form work complete all as specificed and directed.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in levelling course ,finished even and fair to receive floor finishes all as specified and directed.

M&L for Coloured joint freen non Skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with colour of tile over and including15mm thick screed in CM(1:6) complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 20 to 25 mm thick joint with grey cement slurry, mixed with pigment to match the shade of slab including rubbing and mirror pollishing , laid over and including screed bed 20mm thick in CM (1:4) complete all as specifified and directed

M&L for mirror finish polishing the existing kota ston floor,steps etc by grinding and wax polishing complete all as specified and directed

M&L for stone dust filling under floors including watering and consolidation.

M&L for 60 mm thick machine pressed precast concrete interlocking paver block rubber moulded (glossy finish) of M 35 Grade of approved shape, size & colour confirming to IS 15658-2006 with grey cement and pigment complete all as specified and as directed.

M&L for providing cement concrete 1:2:4 type B0 using 12.50mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified

M&L for glazed ceramic coloured tile of size 300mm x 200mm x 6 to 7mm thick in dado or skirting over and including rendering 10mm thick in CM (1:4), jointed in neat grey cement slurry and pointed in coloured cement to match the colour of tile complete all as specified and as directed.

M&L for granite 20mm thick machine cut, bedded laid over and including cement screed bed 15 mm thick in CM (1:4) laid and jointed with grey cement sluury , misxed with pigment to match the shade of slab including grinding, moulding rounding, chamfering and polishing complete all as specified & directed.

Taking down cement plaster on wall built in cement mortar including racking out joints, hacking for key scrubbing down with water etc all as derected and specified.

M&L for Rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound on brick or concrete surfaces trowelled to even and smooth finish without using extra cement complete all as directed and specified .Note:WPC shall be measured and paid separately

M&L for rendering 15mm thick in CM 1:6 finished even and smooth without using cement complete all as directed and specified.

M&L for rendering 10mm thick in CM 1:3 on concrete surfaces in ceiling finished even and smooth without using extra cement all as specified and directed.

Supply only liquid water proofing compound.

Taking down old tarfelt of existing water proofing on RCC roof/sunken slab surfaces including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. removing debris out site of Defence land complete all as specified and directed.

M&L for brushing neat cement slurry with 3.0kg of cement per sqm on roof top complete all as specified and directed

M&L for 15 mm thick cement plaster in CM (1:4) on roof surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for cutting out cracks to V- section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete as directed and specified.

M&L for preparing roof surfaces and applying bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete.

M & L for applying a tack coat of industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces complete all as specified .NOTE: (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat shall be measured and paid separately under this item .)

M&L for 3mm thick APP based polymeric membrane minimum weighing 3kg/sqm and reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed.Note: Application of APP membrane shall be carried out through authorised applicator of Manufacturer.

M&L for applying two coats of bitumen based aluminium painting @ 0.15 Kg / sqm for each coat over APP membrane including preparation of surface complete all as specified and directed.

Taking down steel tubing 15mm bore and connections complete all as specified and directed

Taking down steel tubing 20mm bore and connections complete all as specified and directed

Taking down steel tubing 25mm bore and connections complete all as specified and directed

S&F GI tubing 15mm bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all complete all as specified and directed.

S&F GI tubing 20mm bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all complete all as specified and directed.

S&F GI tubing 25mm bore medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying three coat of white wash all as directed and specified.

M&L for applying 1mm thick white cement based wall care putty all as specified

M&L for preparation of newly plastered wall surfaces and applying two coats of acrylic washable distemper over a coat of cement primer complete all as specified and directed.

M&L for preperation of old decorated surfaces of wall by broming down or steel wire brushing scapping down smoke soot,moulds,moss and trading oil and greasy from plastered or unplastered surfaces including conrnices/pillasters etc and applying two coats of white wash complete all as specified and directed.

All as per item No. 36 here-in before but applying two coat of white wash on ceiling

All as per item No. 36 here-in before but applying one coat of arcylic washable distemper.

M&L for preparation of old decorated surfaces of wall , pilasters, cornices by brooming down or steel wire brushing, scrapping down and washing with water after completion of precoat treatment and applying two coats of antifungal weather coat arcylic emulsion paint over a coat of primer (X2) complete all as directed and specified . Make : (a) Asian (Apex Ultima), Berger weather coat all Guard, ICI Dulux (Weater shield Max), Nerolac (Excel Total) Make of primer : Asian (X2) or othe equivalent. Note : (a) Each stages (ie) Preparation of surface,primer and application of first coat and second coat of Apex shall be passed by Engineer- In-Charge (b) Written Warrenty for four years shall be furnished by the contractor for this item.

M&L for preparation of newly plasterd surfaces of wall,pillasters ,cornices etc and applying two coats of anti fungal weather coat acrylic emulsion paint ove a coat of primer (X2) complete all as directed and specified . Make :(a) Asian (Apex ultima) ,Bergar weather coat all Guard, ICI DUlex ( Weather sheild Max) , Nerolac ( Excel Total) Make of Primer : Asian (X2) or other equivalent Note : (a)Each stages (ie) Preparation of surface,primer and application of first coat and second coat of Apex shall be passed by Engineer- In-Charge (b) Written Warrenty for four years shall be furnished by the contractor for this item.

S&F in repair PVC (SWR) floor trap/Nahani trap plain or multi with stainless steel grating dia of outlet bore 75mm bore including joinitng to waste pipe complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints fixed to walls or floor or trench complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) juction single (Single T) eaqual or unequal complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) vent cowl complete all as specified and directed

S&F in repair 110mm bore PVC (SWR) bend any radious complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints fixed to walls or floor or trench complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) bend any radius complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) juction single (Single T) eaqual or unequal complete all as specified and directed.

S&F in reppairs 15mm dia CP fancy type stop valves ,cast copper alloy fancy type (concealed type) screw down high pressure, screwed both ends for iron pipe or for union of complete all as specified and directed.

S&F in repairs angle stop valves one way, brass chromium plated, fixed to iron pipe or for unions 15mm bore complete all as directed and specified. Make : plumber/parryware or other equivalent as approved by GE

S&F in repair pillar taps (swan neck fancy type type) cast copeer alloy with capstan head, screwed down, high pressure with long screwed shanks and fly nuts fixed with 15 mm bore pipes complete all as specified and directed.

S&F in repair bib fancy type cast copper alloy chromium plated with crush or butterfly handle, screwed for iron pipe or for brass ferrule 15mm bore complete all as directed .

S&F in repairs Brass Fancy type shower rose 125mm dia with shower arm 300mm long of approved quality complete all as specified and directed.

S&F in repairs PVC flushing cistern, low or high level, 10 litres capacity,with inlet, ball valve, syphonic action type, float and handle, PVC flush pipe 32mm , pull or push type including brackets complete all as specified and directed.

S&F in repairs mild steel chromium plated grating 100 mm dia with or without waste hole complete all as direct and specified.

S& F in repairs viterous china wash basin white (oval shaped under counter) of size 550mm X400mm including 32mm brass CP waste coupling integral foot rest including connection to trap and to flushing pipe,anti syphonic pipe etc complete and making good to floor in CM 1:3 all as specified and directed.

S&F in repair vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white colour with integral foot rests (excluding flushing cistern pipe , anti syphonage pipe etc,and flush pipe) including provision of cement concrete bedding complete all as specified and directed.

S&F in repairs PVC connetion 15 mm bore pipe with brss nut , 450mm long complete all as specified and directed.

S&F in repair stainless steel sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair waste coupling of 40 mm dia PTMT (half or full threaded).(minimum weight 60gms) complete all as specified and directed.

S&F PVC waste pipe fixed to any type of coupling of 40mm threaded complete all as specified and directed.

S&F in repair brass chromium plated CP tubuler towel rail 20mm dia

S&F in repair sheet shelf assmbly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as directed and specified.

S&F Rotational moulded polyethylene water storage tank 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position including 25 mm bore PTMT Nipple and ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass suitable for HDPE water tank. (Minimum weight 65 gms) including dismantling of old water tanks and removing to store complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) n.exc 1.5 Sqm each removing to store complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm removing to store complete all as specified and directed.

Taking down shutters of any description exc 1.00 sqm but n exc 2.00 Sqm each and removing to store.

S&F solid PVC both side prelaminated door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying & opening as per specification and drawing including all fixtures shown on drawing all as specified and diredcted.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joining together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F Pressed steel door frame of size 125mm x 60mm with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete as specified.

S&F Plain, framed, panelled factory made second class hard wood 35mm thick shutter approved quality (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered perticles board with commercial veneering both faces . The size of rail and style asnper I.S. 1003 (Part-1) kiln seasoned and chemically pressure treated, fixed with screws etc. complete all as directed and specified.

S&F 35MM thick second class hard wood , factory made, glazed and skeleton door shutter, open rebated and prepared to receive glass, gauze etc divide into squres witth rail and style include cut and mitred beads for securing wire cloth etc.the size of members as specified in SSR-2009 Part-I clause No 8.20 complete all as specified and directed.

S&F Butt hinges, cold rolled mild steel and fixed, 100mm size complete all as directed and specified.

S&F Butt hings, exttruded alumunium alloy with galvanished mild steel hings pin, anodised and fixed

S&F Extruded aluminium alloy handle fabricated type anodised of size 200mm complete all as directed and specified.

S&F aluminium anodised barrel tower bolt of length 150mm extruded section complete all as directed and specified.

S&F in repairs 250mm long aluminium alloy , anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sectioms and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed

S&F in repair mild steel rat tail rod pattern helical door spring of size 300mm including roller and roller plate fixing to iron frame by welding including cutting out old damge/inactive helical door spring complete as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing dovetailed or welded and making good of surface with rendering in CM 1:6 all around the window complete all as directed and dpecified.

All as per item No. 80 above but without glazing bars.

S&F steel ventilators with top hung shutter including hinges, steel peg stay and making good of surface with rendering in CM 1:6 all around the ventilators complete all as specified ad directed.

S&F chimney bars window guard bars etc fixed independedntly in steel frames MS work L or T section.supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 all as specified and diretcted.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, screws and nuts bolts etc. complete all as specified and directed

M&L for preparing new wooden surface of any decription not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing new steel surface of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coa of red oxide primer complete all as specified and directed.

M&L for forming 20mm thick expansiom joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade 'A' for 150 mm thick slab

S&F plain, galvanised, mild steel sheeting 1mm thick with grade of zinc coating , driling and fixing with necessary screw, in construction joint, etc (length and girh as fixed) omplete all as specified and directed.

S&F mild steel work in tubular truss including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade st-240 including one shop coat of zinc chrome primer paint including preparation of surface.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

S&F in repair stainless steel decorative type curtain rod 25mm dia including necessary bracket & fittings complete all as directed and specified

Hacking out old broken glass panes any thickness and size from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc 0.5 Sqm in each pane complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.56mm nominal dia of wire and average width of aparture 1.40mm dia with stainless steel wire staple /GI screws/wooden beading complete all as specified and directed.

INTERNAL ELECTRIFICATION

M&L for Concealed point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLS multi stranded conductor cable in and including PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including sunk in anodized pressed steel box of 1.6 mm thickness, 60 mm deep for housing switch socket etc with white laminated 3 mm thick hylam sheet cover ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLS cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engineer in-charge for following :-

One light point controlled by one switch

One Exhaust fan/Ceiling Fan point controlled by one switch

One 5amps socket out let point controlled by one switch on same board with other switches.

One 5amps socket out let point on independent board controlled by one switch.

All as per item No 96 here in before but using PVC insulated unsheathed 2.5 sqmm cross sectional area cable for phase /neutral & for earth 2.5 Sq mm green PVC insulated cable for 15 Amps socket point on independent board controlled by one switch.

S&F in repair switch piano flush button single pole one way 6 Amp 240 volt complete as directed.

S&F in repair socket outlet flush type 5 pin, 6 Amps, 230 volts complete all as directed.

S&F in repair switch piano flush button single pole one way 15 Amp 240 volt complete as directed.

S&F in repair socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 230 volts complete as directed.

S&F in repair ceiling rose surface bakelite three terminal complete all as directed.

S&F in repairs electronic fan regulator step type complete.

S&F in repairs integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes complete all as specified and directed. Make:- Havells Cat No. LHEXBLP7PN1W018 , Bajaj cat Pt No. BCLSB 18WH or other equivalent in Wipro

S&F in repairs integrated LED tube light fitting 1x9/10 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square box complete all as specified and directed .Make:- Havells Cat No. LHEXBLP7IN1W009 Bajaj Cat Pt No. BCLSB 10 WH or other equivalent in Wipro

S&F in repairs LED street light fittings 1x30 Watt, 5700K complete fitting having pressure dia cast aluminium housing with heat resistant toughened glass & IP 65 protection fixed on and including sufficient length and appropriate size GI bracket with all accessories duly connection with three core flexible copper cable complete all as specified and directed .Make:- Havells Cat No.LHEXAYP7PN6K030 Crompton Cat No. LSTO-25-CDL, Bajaj Cat No. BCLST 25W LED IV2

M&L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall and two runs of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Four runs of 6 sqmm cable, two runs of 6 sqmm cable and one run of PVC conduit shall be measured as one unit length

S&F in repair sub main wiring with two runs of single core FR LS PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including FR LS PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as continuous earth conductor cable connected to earth dolly from main distribution board complete all as specified and directed by Engineer-in-Charge.

S&F in repair double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed

S&F in repair MCB SPN 6 to 32 amps 10 KA, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed

S&F in repair MCB SP 240 volts 6 to 32 Amps, 10 KA breaking capacity, 'B' series including connection with suitable size aluminium / copper lugs complete all as specified and directed

S&F in repairs flush mounting factory made Vertical TPN DB, IP-43 Protection -IK 08, with metal double door with 200 Amps rated copper busbar with 2 neutral bar, earth bar and cables ties for cable management fully insulated bus bar with set of wires and door earthing with provision of sapce for TP/FP 100-125 Amps GI Frame MCCB as incomer and SP/TP MCBs as out going 4 way complete all as specified and directed

S&F in repairs double door TPN DBs four way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral complete all as specified and directed

S&F in repairs MCCB TPN 100 Amps 25 KA including connection with suitable size aluminium / copper lugs complete all as specified and directed

S&F in repairs MCB TPN 50 to 63 amps 10 KA, c-series including connection with suitable size aluminium/copper lugs complete all as specified and directed

Taking down of ceiling fan/Exhaust Fan , sealing cable end,dismantling blades and removing fan and blades to store and Painting of ceiling fans/Exhaust Fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust & refixing of ceiling fan/Exhaust Fan complete all as specified and directed

M&L for Earthing in repairs complete with galvanized steel earth plate electrode of size 60cm x 60cmx 6.3 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level) with the top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate No.5 of MES SSR parts-I including excavation & earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of PCC earth chamber in mix 1:3:6 type C1 with 40 mm thick RCC 1:2:4 type B1 cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia GI light grade and 15mm dia light grade pipe for earth lead protection and testing on completion, complete all as specified and directed.

S&F Exhaust fan 300mm sweep, 900 Rpm AC single phase 230 Volts, metallic type, complete with louver including electric connection with suitable size copper conductor cable, clamps, nuts, bolts etc including making hole of appropriate size in the existing brick wall and making good the disturbed wall and matching with the existing surface of wall complete all as specified and directed by Engineer-in-Charge. Make : Havells Model: Turbo Force SP white or other equivalent in /Bajaj/Crompton

S&F ceiling fan fan 1200mm sweep, 5 star Rating BLDC , AC single phase 230 Volts, including electric connection with suitable size copper conductor cable, clamps, nuts, bolts etc complete all as specified and directed by Engineer-in-Charge. Make : Havells Model: Havells Model: Efficiencia Neo (BLDC 26W) or other equivalent in Bajaj/Crompton

M/S UnitedConstruction

Goyal Construction

M/S Sunshine Construction