Day to day works of NGO Qtr

Amount

Demolishing concrete manually / by Mechanical means including disposal of Material with in 50 mtr. lead.

1:3:6 or richer mix

Demolishing R.C.C work manually / by Mechanical means including stacking of steel bars and disposal of unserviceable Material within 50 mtr. Lead.

Extra for cutting reinforcement bars manually / By Mechanical Means in R.C.C or R.B work (Payment shall be made on the cross sectional area of R.C.C or R.B work).

Extra for scraping, cleaning and straightening reinforcement from R.C.C or R.B work.

Demolishing brick work manually / By Mechanical means incl. stacking of serviceable material and disposal of unserviceable Material with in 50 mtr. Lead (in cement mortar).

Removing mortar from bricks and cleaning bricks incl. stacking with a lead of 50 Mtr. (Stacks of Cleaned bricks shall be measured) from Brick work in cement mortar.

Dismantling doors, windows and clere-story windows (Steel or wood) shutter including chowkhats, architrave, hold fasts etc. Complete and stacking within 50 mtrs. Lead

of area of 3 Sqm. and below

of area beyond 3 Sqm.

Taking out doors, window and clerestory windows, shutters (steel or wood) incl. stacking within 50 mtr. Lead

of area of 3 Sqm. and below

of area beyond 3 Sqm.

Demolishing brick tile covering in terracing including stacking of serviceable Material and disposal of unserviceable material within 50 mtr. Lead.

Demolishing mud phuska in terracing and disposal of Material within 50 mtr. Lead.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground with in 50 mtr. Lead.

Repair to plaster of thickness 12mm to 20mm in patches of area 2.5 Sqm. and under including cutting the patch in proper shape raking out joints and preparing the plastering the surface of the wall’s complete including disposal of rubbish to the dumping ground within 50 mtr. Lead. With cement mortar (1:4) 1 cement : 4 fine sand

Renewing glass panes, with putty & Nails wherever necessary.

Float glass panes of thickness 4 mm

Float glass panes of thickness 5 mm

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering grade. All work upto linth level.

1:5:10 (1 cement : 5 coarse sand : 10 graded crushed stone agg. 40mm nominal size) crushed

1:4:8 (1 cement : 4 coarse sand : 8 graded crushed stone agg. 40mm nominal size) crushed

1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone agg. 20mm nominal size) crushed

1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone agg. 20mm nominal size) crushed

Brick work with common burnt clay F.P.S (Non-modular) brick of class designation 7.5 in foundation and plinth in (1 cement : 4 coarse sand)

Extra for brick work in Super structure above plinth level upto floor V level (By manual means)

Extra for brick work in Super structure above floor V level for each four floors or part thereof (By manual means)

Extra for brick work in square or rectangular pillars.

Half brick masonry with bricks of class designation 7.5 in foundations and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand)

Extra for halff brick masonry in superstructure above plinth level upto floor V level

Providing and laying damp-proof course /under floor 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone agg. 20mm nominal size). Crushed

Centering and shuttering including strutting, propping etc and removal of form work for:-

Foundation, footing, bases of columns.

Suspended floors, roofs, Landing, balconies and access platform.

Shelves (Cost in Situ)

Edges of slab and breaks in floors and walls under 20 mm wide

Providing and laying reinforced cement concrete 1:1.5:3 ( 1 cement :1.5 coarse sand :3 graded crushed stone aggregate 20mm nominal size ) beams, suspended floors, landings balconies & staircases etc. having upto 15° slope excluding cost of centering, shuttering all work upto floor V level

Reinforced cement concrete Works in walls (any thickness) including attached pilasters, buttresses, plinth & string courses, fillets, columns, pillars, piers, abutments, posts and sturts etc. upto floor five level excluding cost of centering, shuttering, finishing & reinforcement.1.1:5:3 ( 1 cement :1.5 coarse sand :2 graded crushed stone aggregate 20mm nominal size )

Providing and laying in position 1:1.5:3grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level

Reinforcement for R.C.C work incuding straightening cutting, bending, placing in position and binding all complete, Thermo - Mechanically treated bars of specified grade) (TMT)

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structutral steel etc. as requierd. In gratings, frames, guard bar ladders railing, brackets, gates & similar work.

Structural steel work in built up welded sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Regrading, terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster preparing the surface of mud phaska to proper slope relaying plaster gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement : 3 fine sand) including replacing unservicable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) with in 50 mtr. Lead .

Raking out joints in lime or cement and preparing the surface for repainting or replastering including disposal of rubbish to the dumping ground within 50 mtr. Lead.

White washing with lime to give an shades

Old work (Two or more coats)

Old work ( One or more coats)

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth incl. necessary repairs to scratches etc complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even sheds old work (One or more coats)

Removing dry or oil bound distemper, water proofing cement paint and the like by scraping and sand papering and preparing the surface smooth including necessary repairs to scratches etc complete.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade.(one or more coats) on old work.

Painting with Synthetic enamel paint of approved brand incl. manufacture of required Colour to give an even shade (One or more coats on old work)

15 mm cement plaster on the rough side of single or half brick wall of mix

1:6 (1 cement : 6 coarse sand)

1:4 (1 cement : 4 coarse sand)

12 mm cement plaster on the rough side of single or half brick wall of mix

1:6 (1 cement : 6 coarse sand)

1:4 (1 cement : 4 coarse sand)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface water thinable cement primer.

Finishing wall with acrylic smooth exterior paint of required shade on new work (Two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing cement paint applied @ 2.2 kg/10 sqm.

Finishing walls with water proofing cement paint of required shade

New work (Two or more coats) applied @ 3.84 Kg/10Sqm

Old work (One or more coats) applied @ 2.20 Kg/10Sqm over priming coat of primer applied @ 0.80 ltrs./10 Sqm complete including cost of priming coat.

Applying priming coat

With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel work

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade.

New Steel work (Two or move coats)

Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.

Painting (one or more coats ) on rain water, soil , waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work :

75 mm diameter pipes

100 mm diameter pipes

150 mm diameter pipes

Wall painting with plastic/acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on oldwork

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work.

Providing and applying white cement based putty of average thickness 1mm of approvded brand and manufacture over the plastered wall surfaces to prepare the surafce even and smooth complete.

Providing and applying white cement based putty of average thickness 2mm of approved brand and manufacture over the plastered wall surfaces to prepare the surafce even and smooth complete.

Providing and fixing double scaffolding system (cup lock type) on the exterior side upto seven storey height made with 40 mm dia M.S tube 1.5 m centre to centre horizontal & vertical tubes joining with cup & lock system with M.S tubes, M.S tube challies, M.S clamps and M.S staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding ststem shall be stiffened with bracings, runner, connection with the building etc. wherever required for inspection of work at required locations with essential safty features for the workmen etc complete as per directions and approval of Engineer-in-charge.The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. (To be used for maintenance work judicially necessary deduction for scaffolding in the existing item to be done.

Providing and fixing polythelene Aluminium polythelene (PE-AL-PE) composite pressure pipes conforming to IS : 15450-U.V stabilised with carbon black having thermal for hot and cold water supply, capable to with stand temperature upto 80 c including all special fittings of composite material (Engineering plastic blend and brase inserts wherever required) e.g Elbows, tees, reducers, couplers and connectors etc with clamps at one meter spacing. This includes testing of joints complete as per direction of the Engineer-in-charge.Internal work-Exposed on wall

1216 (16mm OD) pipe

1620 (20 mm OD) pipe

2025 (25 mm OD) pipe

Providing and fixing Polyethelene-Aluminium Polythelene (PE-AL-PE) Composite presure pipes conforming to IS:15450 U.V stabilised with carbon black having thermal stability for hot and cold water supply , capable to with stand temperature upto 80 c including all special fittings of composite material (Engineering plastic blend and brase inserts wherever required) e.g Elbows, tees, reducers, couplers and connectors etc with clamps at one meter spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the Engineer-in-charge (concealed work including cutting chases and making good the wall etc).

1216 (16mm OD) pipe

1620 (20 mm OD) pipe

2025 (25 mm OD) pipe

Providing and fixing G.I pipes complete with G.I fittings and clamps, including cutting and making good the walls etc Internal work-Exposed on wall (Parkash Surya Make)

15 mm dia nominal bore (Medium)

20 mm dia nominal bore (Medium)

25 mm dia nominal bore (Medium)

32 mm dia nominal bore (Medium)

Providing and fixing G.I Pipes complete with G.I fittings including trenching and refilling etc (External work) (Parkash Surya Make)

15 mm dia nominal bore (Medium)

20 mm dia nominal bore (Medium)

25 mm dia nominal bore (Medium)

32 mm dia nominal bore (Medium)

40 mm dia nominal bore (Medium)

Providing and fixing G.I pipes complete with G.I fittings excluding trenching and refilling etc (external work) 15 mm dia nominal bore (Medium) (Parkash Surya Make)

Providing and fixing G.I pipes complete with G.I fittings excluding trenching and refilling etc (external work) 20 mm dia nominal bore (Medium) (Parkash Surya Make)

Providing and fixing G.I union in G.I pipe including cutting and threading the pipe and making long screws etc complete. (Unique/DRP make)

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

Painting G.l. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work.

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

Cutting holes in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete

upto 15x15 cm

Providing and fixing PVC Pipe including jointing with seal ring (Finolex / Supreme ) of pressure @ 4 kg/cm²

75 MM dia pipe

110 MM dia pipe

150 MM dia pipe

200 MM dia pipe

Providing and fixing PVC moulded fittings/accessories for PVC pipes including jointing with seal ring complete (Finolex / Supreme make)

75mm dia Plain bend

75mm dia Door bend

75mm dia Cowl

110 mm dia Plain Bend

110 mm dia Door Bend

110 mm dia Door Tee

110 mm dia Tee junction

Reducer Tee 110 MM dia to 75mm dia

Cowl 110 MM dia

75MM dia Door Tee

150MM dia Plain Bend

150MM dia Door Bend

Providing and fixing PVC floor trap of Finolex / Supreme make.

Providing and fixing water closet squtting pan Indian type (Orrisa pattern) white vitreous china w.c pan of size 580x440 mm with integral type foot rests (Hindware / Cera/Parryware make) with 100 mm PVC P&S Trap including cutting and making good the walls and floors wherever required.

Providing and fixing white vitreous china pedestals type water closet (Hindware/Cera/Parryware make) (European type w.c pan) with 100 mm PVC P&S trap including cutting and making good the walls and floors wherever required.

Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required (Hindware/Cera/Parryware make)

Size 550 x 400mm

Size 630x450 mm

Providing and fixing white vitreous china pedestal for wash Basin completely recessed at the back for the reception of pipes and fittings. (Hindware / Cera/Parryware make)

Providing and fixing round wash Basin white vitreous china 450 mm dia complete (Hindware / Cera/Parryware make)

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340 x 410 x 265mm size respectively. (Hindware / Cera/Parryware make)

Providing and PVC low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231 with all fittings and fixtures complete. (Hindware / Cera / parry ware make). (10 lts. Capacity) white.

PVC Connection forflushing cistern, wash basin, sinks etc.

450 mm long

600 mm long

Providing and fixing white solid plastic seat with lid for pedestal type w.c pan complete (Hindware / Cera / Parry ware make).

Providing and fixing 18mm stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep, fixed in urinal partitions by White Agaria Marble Stone/Granite stone of approved shade by cutting a chase of appropriate width withchase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-Charge and finished smooth.

Providing and fixing white vitrious china laboratory sink with C.I barackets C.P brass chain with rubber plug 40mm C.P Brass waste and 40mm C.P brass trap with necessary C.P brass unions complete including painting of fittings and brackets, cutting and making good the walls wherever required.(Hindware / Cera / Parry ware make)

450x300x150 mm size

600 x 450x 200 mm size

Providing and fixing Stainless Steel AISI 304 (18/8) kitchen sink as per I.S:13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets cutting and making good the walls wherever required:-

610x460mm bowl depth 200mm

470x420 mm bowl depth 178mm

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete Flexible pipe 32 mm dia

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete rigid pipe 32 mm dia

Providing and fixing PVC fittings (Paryag make)

Pillar cock

Short nose bib cock

Long nose bib cock

Angle cock/valve

Providing and fixing C.P fitting (Jaquar (Essco) /Marc/Cera make)

Pillar Cock

Short Nose bib cock

Long Nose bib cock

Angle Valve

Mixer for wash Basin

Mixer for bathing (Wall mixer)

Swan Neck left / right tap

Providing and fixing sanitary fittings complete

C.P Jet with Rod complete

C.P Gratings 4"

C.P Gratings 6"

C.P Extension Nipple 1"

C.PExtension Nipple 2"

Soap dish

C.P Towel Rod 2'-0" (20 mm dia)

C.P Towel Rod 1'-6" (20 mm dia)

Towel Ring 200 mm dia

waste coupling for wash basin 32 mm dia

waste coupling for Laboratory sink 50 mm dia

Shower with Arm

Conceled Stop Cock with Head

Glass shelves of superior quality 440 mm long, 124 mm width.

Providing and fixing mirror of superior glass and of required shape and size with Dark mirror moulding (Fancy looking glass)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license]

Construction brick masonary manhole in cement mortar 1:4 (1 cement : 4 coarse sand) R.C.C top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size ) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80cm and 45cm deep including angle Iron frame 50x50x6mm and precast RCC slab cover with 40x40x5mm frame (2'-0" x 2'-0") with F.P.S bricks with class designation 75 & with crushed stone aggregate.

Extra for depth. for man holes of Size 90x80cm

Demolishing W.C platform cement concrete and disposal of unserviceable material upto dumping site at ground floor road side. (maximum 3'-0" x4'-0"x1'-6" )

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z-section and other sections of approved make conforming to IS 733 and IS 1285, fixed with dash fastener of required dia and size incl. necessary filling upto gaps at junctions i.e at top, bottom and sides with required EPDM rubber/ neoprane gasket felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required incl. cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless steel screws, all complete as per architectural drawing and the directions of Engineer-in-charge (glazing ,panelling and dash fasterner to be paid for reparately). For fixed portion

Anodised alumnium (anodised transparent or dyed to required shade according to IS:1868 minimum anodic coating of grade AC 15).

Powder coated aluminium (minimum thickness of powder coated 50 microns)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z-section and other sections of approved make conforming to IS 733 and IS 1285, fixed with dash fastener of required dia and size incl. necessary filling upto gaps at junctions i.e at top, bottom and sides with required EPDM rubber/ neoprane gasket felt etc. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required incl. cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless steel screws, all complete as per architectural drawing and the directions of Engineer-in-charge (glazing ,panelling and dash fasterner to be paid for reparately). For fixed portion For shutters of doors, windows & ventilators incl. providing and fixing hinges /pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprane gasket required (fittings shall be paid for separately).

Anodised aluminium (anodised transparent or dyed to required shade according to IS 1868 minimum anodic coating of grade AC 15).

Powder coated aluminium (minium thickness of powder coated 50)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (confirming to IS 12823 grade I type II) in panelling fixed in aluminium doors, windows shutters and partition frames with C.P brass / stainless steel screws etc complete as per architectural drawing and directions of Engineer-in-charge. Pre laminated particle board with decorative lamination on both sides.

Repair to Aluminium Door shuuers including refixing/fixtures/ACP sheets rubber gasket/aluminium beeding etc. complete ( Cost of ACP sheet paid sepretely

Providing and fixing glazing in aluminium door, windows, ventilator shutter and partitions etc with EPDM rubber / neoprene gasket etc complete as per the architectural drawing and directions of Engineer-in-charge (Cost of aluminium snap beading shall be paid in basic items with floating glass panes of 5.50 mm thickness (weight not less then 13.50 kg/Sqm.) (Saint Gobin/Modi Guard)

Providing and fixing double action hydraulic floor fixing of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg for door, incl. cost of cutting floors embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece MS sheet outer box with slide plate etc complete as per the direction of Engineer-in-charge with stainless steel cover plate minimum 1.25 mm thickness.

Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing alumnium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with nuts and screws etc complete

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc complete.

Providing and fixing alumnium handles ISI marked anodised (anodic coating not less than grade AC as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc complete.

Providing and fixing in position collapsible steel shutters with vertical channels 20x 10x2 mm and braced with flat iron diagonals 20 x5 mm size with top and bottom rail of T- iron 40x40x6mm with 40 mm dia, steel pulleys complete with bolts, nuts, locking arrangment, stoppers, handles, including applying a priming coat of approved steel primer.

Providing & fixing panelled or panelled & glazed shutters for Doors and windows & clerestoy windows incl. ISI marked M.S pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid separately, all complete as per direction of Engineer-in-charge.

Second class Deodar wood : 30mm thick

Second class Deodar wood : 35mm thick

Providing & fixing panelling or panelling & glazing in panelled or panelled and glazed shutters for doors, windows & clerestory windows (Area of opening for panel insert excluding portion inside Grooves or rebates to be measured) panelling for panelled or panelled & Glazed shutters 25mm to 40mm particle board 12mm thick, Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked

Providing and fixing 35mm thick wire gauge shutters using Galvanised M.S wire gauge of average width for aperture 1.4mm in both directions with wire of dia 0.63 mm for doors, windows and clear story windows with hinges and necessary screw & including ISI marked bright M.S bright finished M.S Butt hinges with neceaasry screw of required size. Second Class Deodar wood.

Providing and fixing wooden moulded beading to doors & windows frames with iron screws, plugs & priming coat on unexposed surface etc complete. 2nd class Teak wood

Providing & fixing curtain Rods of 1.25 mm thick chromium plated brass plate with two chromium plated brass Brackets fixed with C.P Brass screws & wooden plugs etc wherever necessary complete.

12mm dia

20mm dia

Providing and fixing tiles false ceiling of approved material of 595x595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanised @ 120 Sqm. both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30 thick sheet 1200mm lay spaced between man "T" at 600mm center to center to form a grid of 1200x600mm and secondary cross "T" of length 600mm size 24x25mm made of 0.30 mm thick sheet to be interlocked at middle of 1200 x 600mm panel to form grids of 600x600 and wall angle of size 24x24x0.30mm laying false ceiling tiles of approved texture in the grid. including, wherever required cutting/making, opening for services like diffusers, grills, light fittings, fixtures smoke detectors etc Main "T" runners to be suspsnded form ceiling using G.I slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mtr. long dash fasterners 4mm G.I adjustable rods with galvanised butterfuly level clips of size 85x30x0.8mm spaced at 1200mm center to center along main T, bottom GI Metal ceiling lay in perforated Tegular edge globawhite color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop made of GI sheet having galvanizing of 100 gm/sqm (both sides inclusive) and 20% perforationarea with 1.8 mm dia holes and having NCR (Noice Reduction Coefficient) of 0.5 electro statically polyesterpowder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat. With common burnt clay (non modular) brick

Extra for every additional 1 cm thickness of mud phaska.

Providing gola 75 x 75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand 4 graded stone 10mm down gauge) incl. finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design in 75 x 75mm deep chase.

Making khurras 45x45 em with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing of water proofing treatment to the roof slab, W.C and bathrooms by Austrian technology using diamond shield and fiber mesh covered with two or more coats of specified chemical or using FOSROC, SIKA of BASF water proofing chemical. A primer coat of specified chemical to be applied before fixing/ laying of fiber mesh, complete

Providing and laying water proofing treatment in sunkan portion of WCs, bathroom etc. by applying cement slurry mixed water proofing cement compound consisting of applying. a) After surface preparation, first layer of slurry of cement @0.488 Kg/Sqm mixed with water proofing cement compound @0.253 Kg/sqm. This layer will be allowed to air cure for 4 hours. b)Second layer of sullary of cement @ 04242 Kg/Sqm mixed with water proofing cement compound @ 0.126 Kg/Sqm. This layer will be allowed to air cure for 4 hours followed with water curring for 48 hours. The Rates includes prepration of surface, treatment and sealing of all joints, corners, junctions of pipes and masonary with polymer mixed slurry.

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed water proofing cement compound consisting of applying. a) After surface preparation, first layer of slurry of cement @0.488 Kg/Sqm mixed with water proofing cement compound @0.253 Kg/sqm b) Laying of second layer of fiber glass cloth when the first layer is still green.Overlaps of joints of fiber cloth should not be less than @0.253kg/sqm c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @0.670 kg/sqm and coarse sand @1.289 kg/sqm.This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around d) forth and final layer of brick tiling with cement mortor (Which will be paid for separately) for the purpose of measurement the entire terated suface will be measured.

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement incl. cement slurry but excluding the cost of nosing of steps etc complete.

40 mm thick with 20 mm nominal size stone agg (Crushed)

50 mm thick with 20 mm nominal size stone agg (Crushed)

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately)..Make Khajaria/Rak.

Size of tile 500x500 mm

Size of tile 600x600 mm

Size of tile 800x800 mm

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling/grouting and finishing complete as per direction of Engineer-in-charge.

Size of tile 500x500 mm

Size of tile 600x600 mm

Size of tile 800x800 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete.

Size of tile 500x500 mm

Size of tile 600x600 mm

Size of tile 800x800 mm

Providing and fixing Anti-skid premium tiles on floor (thickness to be specified by the manufacturers) of Ist quality of RAK, KAJARIA make in any colour laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc complete.

Providing and laying vitrified floor tiles of size 600 x600 mm in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete.

Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :

Disposal of unserviceable dismentled material/waste mulba by Mechanical transportation outside Municipal limits incl. cost of loading, unloading, stacking complete (Trolly)

Grinding and polishing old terrazo flooring/Skirting with floor polish of specified brand for smooth finishing including disposal of waste material of grinding/ polishing from site of work to dumping site at ground floor.

Providing and fixing gang saw cut mirror polished (pre moalded and pre polished) machine cut for granite of any color or shade Area of slab over 0.5 sqm in kitchen, platform, vanity counters, window sills facias and similar locations of required size of approved shade colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement matching pigment, epoxy touch ups including rubbing moulding and polishing to edge to give high gloss finisg etc complete at all levels.

16mm thick

18mm thick

Extra for providing edge moulding to 18mm thick marble stone counters, Vanities etc including machine polishing to edge to give high gloss finish etc complete as per design approved by Engineer-in-charge. Granite work

Extra for providing frosted Glass Panes 10 Kg /Sqm. (4mm Thick) instead of ordinary float Glass Panes 10 Kg/Sqm. in Doors, Windows and clerestory window shutters (Area of opening for Glass Panes excluding Portion inside rebate shall be measured).

Providing and fixing M.S Wire gauze to old wood shutters/steel shutters including removing and fitting of shutters complete

Providing and fixing M.S Grills of required pattern in frames of windows etc with M.S Flats square or round bars etc incl. priming coat with approved steel primer all complete.

Fixed to steel windows by welding

Fixed to openings / wooden frames

Providing and fixing PVC Panelling in walls 8 to 10 mm thick including all fittings and fixtures complete ( Wall Affair or any equivalent make)

Carriage of material by M.T including loading , unloading complete

Sand, Aggregate upto 40mm for an avg. Distance of 8 km

Good Earth avg. for an avg. Distance of 15 km

Crusher Bajri for an avg. Distance of 8 km

Bricks avg.for an avg. Distance of 15km

Bricks Tiles for an avg. Distance of 15 km

Supply of Materials loading unloading and stacking complete & Including carriage upto site of work.

Aggregate upto 40mm

Good earth

Crusher Bajri

Bricks

Bricks Tiles

Stones

Supply of labour for repair works

Black smith Ist class

Carpanter Ist class

Carpenter 2nd class

Mason Ist class

Massa 2nd class

Painter

Plumber

Welder

Sweeper

Aluminium Fitter

Electrician

Mazdoor

Supply of portable Welding machine for various repair work including carriage

Supply of portable generator set including fro carriage

Supply of concrete vibrator (L.T.) including fro carriage

Two Coats of elastomeric polymer modified cementatious waterproofing coating Brushbond RFX (FOSROC product) and then protection coat of screed 3-5 mm thick of cement mortor 1:3 admixed with bonding agent and integral water proofing component canplast WL @125 ml per bag of cement. The Process of watre proofing shall be taken up after through cleaning of the surface with wire brush/power brush to have surface free from dust dirt and loose material

Providing and fixing PVC sheet to floor including wastege etc. complete (Superior quality)

Providing and fixing of C.P brass spreaders with brass unions and clamps complete for urinal

Providing and fixing ball valve (brass) of approved quality complete (15 mm nominal bore)

Providing and fixing ball valve (brass) of approved quality complete (20 mm nominal bore)

Providing 1¼" wooden moulded beading to the ceiling including cost of nails, wastage etc. complete

Providing and fixing 1" wooden gola to the ceiling including cost of nails, wastage etc. complete

Providing and fency knoob to the cupboard shutters complete Job

Providing and fixing 19 mm thick wooden board shutters to cabnit including M.S hinges and screws complete

Demolishing PCC 1:4::8 or weaker mix including disposal of material with in 50 mt. lead.

Providing and laying DPC under floor 40 m thick with cement concrete 1:2:4 (1 cement 2 coarse sand :4 graded crushed stone agg. 12.5 mm nominal size)

Providing and fixing hand held jet sprayer (Hindware) complete

Providing and ficing PVC pipe 40 mm dia (Superior) of pressure @4 Kg/Cm2

Providing and fixing PVC bend 40 mm dia (Superior)

Providing and fixing cover to PVC water storage tank complete

Providing wood work in frames of doors and windows and other frames and fixed in position (Sal wood)

Dismantling aluminum / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material within 50 meters lead asdirected by Engineer-in-charge.

Providing and fixing Anodized aluminum grill (Anodized transparent or dyed to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing windows frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved Anodized aluminum standard section around the opening, all complete as epr requirement and direction of Engineer-in-charge. (only weight of grill to be measured for payment)

Dry stone pitching (any thickness) excluding cost of stones.

On Horizontal

On Slopes

Providing and laying cement concrete in 1:5:10 in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.

Aluminium sheet for doors 1mm thick

Providing and fixing double glazed hermetically sealed glazing in aluminum windows, ventilators and partition etc. with 6mm thick clear float glass both side having 12mm air gap including providing EPDM gasket, perforated aluminum spacers, desiccants, silicon sealant (both primary and secondary sealant) etc. as per specifications, drawings and directions of Engineer-in-charge complete. sqm 3852.20

Desmentling of Pebbble desh plaster tiles on outer walls by way of chisel & hammer complete job including dispoal of rubbish job including disposal of rubbish outside muncipal limit

Steel work in built up tubular round, square or rectangular including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer including welding and bolting with special shaped washers etc.complete. Hot finished welded type tubes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing) having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.

15mm nominal outer dia pipes.

20 mm nominal outer dia pipes.

25 mm nominal outer dia pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.) having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.

15mm nominal outer dia pipes.

20 mm nominal outer dia pipes.

25 mm nominal outer dia pipes.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete

15 mm nominal bore

20 mm nominal bore

25 mm nominal bore

Providing and fixing 6 mm water proof ply complete job

Providing and fixing 12 mm water proof ply complete job

Providing and fixing 19 mm water proof ply complete job

Providing and fixing gun metal gate valve with CI wheel of appoved quality

25 mm nominal bore

32 mm nominal bore

40 mm nominal bore

50 mm nominal bore

65mm nominal bore

80 mm nominal bore

Providing corrugated G. S. sheet 0.63 mm thick with zinc coating not less than 275 gram/m2 in roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch inhorizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Extra for straight cutting in C.G.S. sheet 0f 0.63 mm thick in roofing for making opening of area exceeding 40sq.decimetre for chimney stacks, sky light etc.

Providing and fixing lSI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hardwood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces ofshutters.35 mm thick including lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size

Providing and fixing lSI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot &double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge.(Door handle, lock and stopper etc.to be paid separately).

Supply and installation of Armstrong Medintech Plus PUR homogeneous vinyl sheet flooring, Inc, 2 metre wide and overall thickness of 2mm. The thickness of wear layer would be 2mm. The product should be homogeneous and single layered. The wear surface shall consist of impregnated polyurethane homogeneous mixture of PVC with TRUESHIELD technology, Plasticizers without DOP, Urethane, color pigments and filler calendered to form a sheet. Color and pattern details shall be dispersed throughout the thickness of the wear layer. Medintech Plus shall conform to group "T" wear resistance as per EN 649, Clean Room certified with class 'A' as per ASTMF5100, Flammability resistance of class Bfl-s1 as per GB8624-2006, Dynamic coefficient of friction of class DS as per EN 13893, Thermal Resistance of 0.072m2K/W as per EN 12667, Thermal conductivity of 0.071W/mK as per EN12524, impact sound reduction of 3dB as per ISO 10140, Slip Resistance of class R9 as peDIN 51130, Residual indentation of 0.03mm as per GB/T 4085-2005, Color fastness rating of ≥6 as per ISO 105-B02, total weight being 2.8kg/m2 as per EN430. The product shall be suitable for applications in class 23/34/43 areas as per EN685. Product shall exhibit antistatic behaviour, resistance to bacteria,resistance to chemical, resistance to staining,suitability to castor chair. The product shall be FloorScore certified with no SVHC content published by European Chemicals Agency(REACH). Product shall contribute to LEED points under Indoor environmental quality(LEED EQ) and Material & Resource (LEED MR) category.

Supply and installation of Armstrong PASTELL Conductive Vinyl Sheet Flooring , 1.83m wide, having a nominal total thickness of 2.2mm. The nominal thickness of the wear layer would be 2 mm. The product should have a conductive backing of 0.2mm. The wear surface shall consist of impregnated polyurethane homogeneous mixture of PVC, Plasticizers, Urethane, color pigments and filler calendared to form a sheet. Colors and pattern detail shall be dispersed throughout the thickness of the wear layer. PASTELL Conductive shall conform to Group P of Wear Resistance as per EN 649, Flammability of class Bfl-s1 as per EN 13501-1, Slip resistance of R9 as per BGR 181, Dynamic Coefficient of friction as DS as per EN 13893, Impact sound reduction of 3 dB as per EN ISO 140-8, Residual indentation of 0.05 mm as per EN 433, Color fastness rating ≥6 as per ISO 105-B02, Vertical resistance(R1) less than 106Ω as per EN 1081, Static electrical charge of ≤2.0kV as per EN 1815, Thermal resistance of 0.01m²K/W as per EN 12667, Thermal conductivity of 0.25 W/mK as per EN 12524. PASTELL conductive shall exhibit ESD properties as following - Vertical resistance less than 3.5x10^6Ω as per EN 61340-4-1, Static electrical charge - system test less than 100V as per EN 61340-4-5.The class of use of PASTELL Conductive is 23/34/43 as per EN 685.

Providing and fixing single piece slim concealed cistren make jaquar complete Job

Providing and fixing control plate opal for europen type w.c seat make jaquar complete Job

Providing and fixing Metropole flush valve for europen type w.c seat make jaquar complete Job

RAJ KUMAR

HIRA LAL