SPL REPAIR TO BLDG NO 15A (LINE STORE) AND 20A (CQMH STORE) OF 15 ARTY BDE SIG COY AND PROVN OF SHED AT APLS AT OLD AMRITSAR CANTT

Amount

Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from frames) not exc 1.5 Sqm each

Taking down chowkat or frame with shutter (without taking off shutter from frames) exc 1.5 Sqm and n.exc 4 Sqm

Taking down Shutters of any description exc 1 sqm but n.exc 2 sqm each

Material and Labour PCC 1:1.5:3 type B0 using 12.5 mm graded stone aggregate for repair of Chajja, Fascia, parapets etc using chicken wiremes upto 8 m height including necessary formwork, scaffolding. And applying two coats of cement base paint over coat of primer over cement plaster 1:4 complete all as specified and directed.

Supply and fixing factory made 30 mm thick flush shutters solid core construction with block board core and plywood face panels complete all as directed.

Material and Labour two coats of synthetic enamel painting on newly wooden surfaces of any description over 10 cm in width or girth not otherwise described above one coat of pink primer including prepration of previously untreated surfaces.

Material and Labour for rendering 15 mm thick on brick work or concrete surfaces on wallsheight in CM 1:4 finishing faire complete all as specified and directed

Material and Labour for rendering 12 mm thick on brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed

Material and Labour for rendering 10 mm thick on brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement complete all as specified and directed.

Material and Labour for applying two coats of whitewash on ceiling including preperation of newly plastered surfaces complete all as specified and directed.

Material and Labour for complete removal of existing treatment of ceiling surfaces and applying two coats of white wash complete all as specified and directed.

Material and Labour for applying two coats of white wash on wall surfaces including preperation of newly plastered surfaces complete all as specified and directed.

Material and Labour for complete removal of existing treatment from wall surfaces and applying two coats of white wash complete all as specified.

Material and Labour for preparation of newly plastered surfaces and applying two coats of cement base paint paint over a coat of cement primer on external wall surfaces complete all as specified.

Material and Labour for complete removal of existing treatment of wall surfaces and applying two coats of cement base paint paint over a coat of cement primer on external wall surfaces complete all as specified.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed.

Material and Labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry mixed with pigments in floors including 15mm thick screed bed in cement mortar 1:4 complete all as directed.

Material and Labour 75mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate ) as in floor complete all as specified and directed.

Material and Labour PCC 1:2:4 type B-0 using 12.5 mm graded stone agg in coping including weathering slightly rounded or chamfered angle and throating as directed.

Material and Labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in plinth protection Finishing fair and even.

Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.

Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed.

All as per Srl item No 23 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 22 shall be reused after necessary cleaning of mortar).

Material and labour for box type steel window, ERW hollow P-Section size 60mm x 25 mm, double rebated ERW section of 1.25mm thick, comprising of glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one No openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast and guard bars etc as given below all as shown on drg No CEJZ/TD-06/07 incuding cutting holes and PCC 1:2:4, type B-1 in hold fast block complete all as specified and directed as follows:- (a) Hold fast 150mm long of MS flat 12mm x 3mm - 4 Nos per Window (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf (c) MS tower bolt 150mm long - 02 Nos per leaf (d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf (e) Cleat 55mm long of hollow square 15mm, 0.63mm thick- 01 Nos per leaf (f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf (g) MS guard bar 10mm square bars @ 10cm c/c fixed horizontly Note:- Sheet glass wire mesh and painting shall be measured and paid sperately.

Material and Labour two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described over a coat of red oxide primer including prepration of previously untreated surfaces.

Supply and fixing sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane

Supply and fixing 300mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

Supply and fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed.

Supply and fixing 150mm long Aluminium handles, cast type anodised.

Supply and fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed.

Supply and fixing pressed steel frames 1.25mm thick for door size of frame125 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed.

Dismantling Brick tiles/PCC tiles or terracing tiles, single layer on roofs ; Complete all as specified and as directed by Engineer-in-Charge.

Demolition mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) ; Complete all as specified and as directed by Engineer-in-Charge.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar

Material and Labour for Machine cut Kota stone slab flooring 20-25 mm thick over cement screed base of 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified

All as per srl Item No 36 here-in-before but as skirting/dado over rendering 15mm thick in CM 1:4.

Material and Labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in padding concrete fair finish, roof kerbs or mud stops, rounded or chamfered on edges and like including weathering slight rounded and throating ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc ; Complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire roof area with over lapping 100mm to either sides and sealed in after cleaning down the roof by brooms ; Complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement ; Complete all as specified and as directed by Engineer-in-Charge.

All as per Srl Item No. 41 here-in-before but except brick tiles. Note:-Old serviceable tiles shall be reused.

Supply and fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises.

Supply and fixing glazed ceramic coloured tiles 450x300mmx6mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface complete all as specified and directed.

Supply and fixing non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & complete all as specified and directed.

Excavating in post holes (or similar holes) each hole not exceeding 0.5 Cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and remvoing surplus soil to a distance not exceeding 50m and making good surfaces in soft/loose soil complete all as specified & directed by the Engineer-in-Charge.

Cement concrete type B2, 1:2:4 (40mm graded aggregate) in foundations, filling and mass concrete

Supply and fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240.

Material and Labour apply two coats of synthetic enamel paint over a coat of primer including preparation of new steel surfaces.

Supply and fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Taking down carefully existing point wiring of any type (i.e on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan, socket or power point with fittingSupply and fixing ixtures such as ceiling rose, electric fittings, holders, switches, sockets wooden batten, conduit etc including accessories such as wooden gutties/ rawal plug, screw etc including removing materials from site for taking credit of unserviceable items and re-fixing the serviceable items as per schedule and making good disturbed surface of walls, floors etc, complete all as specified and directed. NOTE: The qty of serviceable (such as LED fittings/LED tube and bulb /ceiling/ Exhaust Fans and geysers, electric meters) will be refixed under respective item here under and unserviceable items such as switches, sockets, ceiling rose, holders, brackets, LED fittings, MCB DBs, sunken boxes and fixtures etc. shall be issued to contractor under schedule of credit all as specified and directed.

Material and Labour for point wiring complete with 1.5 sqmm single core PVC insulated sheathed multi-stranded, copper conductor FRLS grade cable of 1100 volts grade conforming to IS:694 drawn through and including non metalic rigid PVC conduit, medium grade, ISI marked, not less than 20mm bore with conduit accessories concealed on wall and ceiling/roof etc, with provn for fixing modular metal flush boxes not less than 1.0 mm thick of suitable modules, concealed in walls with modular white plated cover as top cover fixed with screws for housing switches, socket outlets, fan regulators etc, including provn of 1.5 sqmm nominal cross sectional area, PVC insulated, FRLS, sheathed, 1100 volt grade,multistranded single core green colour copper conductor for earth continuity connected to earth dolly complete all as directed NOTE: (i) Modular metal flush boxes concealed in wall with suitable cover plate for mounting switch, sockets, regulator etc. and cost of cutting chases & making good as existing to disturbed surface with cement mortar, if required any shall be deemed to included in the quoted rates. (ii) Modular fittings/fixtures such as switch, socket, regulator, etc., shall be measured and paid separately as under relevant item.

(a) One light point controlled by one switch

(b) One fan point / Exhaust Fan controlled by one switch

(c) One 5 Amps outlet point on same board with other switches/sockets

(d) One 3 pin 5 Amps socket outlet on independent board.

All as per ser item No. 54 here in above but point wiring with 2.5 Sqmm FRLS cable and 2.5 sqmm cable earth continuity wire for one 3 pin socket outlet,15 Amps on independent board.

Supply and fixing modular switch 1 way 6A, 240 volts, 1 module complete all as specified and directed

Supply and fixing modular socket, 6A, 240 volts, 2/3 pin combined 2 module, flush type all as specified and directed

Supply and fixing ceiling rose surface PVC/Polycarbonate, isolated body with face Bakelite 65x50 mm three terminal complete all as specified

Supply and fixing modular fan step regulator, 2 module, 240 Volts, 50 Hz, suitable for ceiling fan 1200 mm sweep all as directed

Supply and fixing lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings

Supply and fixing LED lights fitting 1x 20W, 220V, AC, 5700K, decorative box type with driver, double sided connection, CRI> 80, PF>95%, THD<10%, Lumen>2100 lm including LED tube light of make: Havells or equivalent in Philips/Crompton, connecting up with 3 core flexible copper conductor cable (1.0 mm² size/core) from ceiling rose complete all as specified and directed.

Supply and fixing Dusk & dawn roadway luminaries 30 Watt, 230 V AC, 5700K outdoor type with epoxy black powder coated sheet of make: Havells or equivalent make of Philips/Crompton, high pressure die-cast aluminum hosing and heat resistant complete with impact and corrosion resistant including thermal management in multiple optics, PF>95%, THD<10%, Lumen>4500 lm with IP 65/66 protection complete incl connecting wire with flexible PVC insulated copper cables from ceiling rose to fitting including driver, lamp bracket made of 32mm bore galvanised iron light grade pipe made to shape having overall length not exceeding 1.5 mtr, through mild steel clamp of 25mm width and four Nos. nuts, bolts & washers of 12mm dia, 100mm long fixed to wall with all other fittings complete and testing all as specified and directed.

Fixing only ceiling fan 1200/1400 mm size, as per item Srl No. 1 after B/R repairs & wiring and making electrical connection from ceiling rose to ceiling fan, testing the same for smooth operation complete all as specified and directed. NOTE: Cost of minor petty items if required such as nut bolt, clamp, bush etc., are included in quoted rate.

Supply and fixing ceiling fan 1200mm sweep complete with blades, down rod, electronic regulator, accessories (i.e. PVC canopy, rubber bush, split pin, hanging clamp, fan hook, holdfasteners etc.) 230 Volts, white colour, with min air delivery 210 CFM, BEE 5 star rated with brushless direct current motor (BLDC) technology and connecting up with & including 3 core flexible copper conductor cable from ceiling rose to ceiling fan complete all as specified and directed

Supply and fixing exhaust fan, heavy duty, steel body AC single Phase, 230V of size 300mm sweep, with blades and frame and louvers complete of make Havells/Crompton/Orient, fixed/grouted to wall with suitable bolts, nuts etc., and connecting up with & including 3 core flexible copper conductor cable from ceiling rose to exhaust fan including cutting hole suitable for fixing exhaust fan complete all as specified and directed

Material and Labour for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 8 way, 240 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, flush to wall, including testing suitable for fixing MCB SPN, SP etc, complete all as directed NOTE: Necessary blank plates if required any to cover the blank MCB's place in DB and the rate shall be deemed to included in the quoted rates.

Material and Labour for distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof, double door, SPN 12 way, 240 volts grade with 200 Amps insulated rated bus bar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP- 43 protection with poly urithene (PU) gasketing, IK-08 Mechanical impact resistance, flush to wall, including testing suitable for fixing MCB SPN, SP etc, complete all as directed NOTE: Necessary blank plates if required any to cover the blank MCB's place in DB and the rate shall be deemed to included in the quoted rates.

Supply and fixing MCB of SP 5 to 32 Amps current carrying capacity, 240V, 10KA 'C' curve, ISI marked, fixed in the MCB DB complete conforming to IS/IEC-60898-1 2002 with connection testing and commissioning including taking down old unsv one from the site complete all as directed

All as per ser item No. 72 above but for MCB SPN 32 Amps

Supply and fixing sub main wiring with 2 runs of 6.0 sqmm single core, multi-stranded PVC insulated, FRLS unsheathed cable 1100 Volts grade with copper conductor drawn through and including concealed non metalic PVC conduit, medium grade, ISI marked, suitable size with conduit fittings and accessories concealed in wall/ceiling/floor including 1 run of 6.0 Sqmm multistranded PVC insulated FRLS, copper conductor cable as earth continuity conductor and connecting to common earth dolly incl taking down old unsv one from site complete all as directed NOTE: Two runs of 6.0 sqmm copper cable and one run of 6.0 sqmm copper cable alongwith non metallic PVC conduit/conduit accessories will be measured as one unit length

Material and Labour for Earthing complete in replacement with galvanised iron mild steel earth plate electrode 60 cm x 60 cm x 6.3mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with top edge of earth plate at a depth of not less than 1.5 m below normal ground level, connected to glavanised earth lead of GI wire of size 4mm dia by means of GI Bolts, Nuts, check nuts & washers and other end of the earth wire connected to earthing test point and protected by galvanised iron pipe light grade 25mm dia from earth plate to Panel/DBs and water pipe 20mm dia GI medium grade from top of the earth electrode raised upto a level of 50cm above ground level, MS funnel with wire mesh embeded in earthing pit of size 30x30x30cm in PCC (1:3:6) type C-1 incl exposed surfaces smoth finished with 15mm thick cement mortar (1:6), RCC pre-cast (1:2:4 type B-1) cover slab of 40mm thick with 2 Nos. MS handles of 12mm dia suitable for carrying of pit cover, Angle iron frame made out of 40x40x4mm angle iron for 30x30mm PCC pit for holding the pit cover including providing charcoal or coke and salt in alternative layers of 15 cm including necessary earth work in soft/loose soil, returning, refilling and removing of surplus soil to a distance n. exc. 50 mtr testing complete all as shown in electrical plate No-3 of MES Schedule Part-I of SSR-2009 complete all as specified and directed. NOTE: (a) Cost of excavation, earth work, watering pipe, test point, MS Funnel with wire mesh and PCC pit with cover will be deemed to be included in the quoted rate. No extra cost shall be paid to the contractor against these items. (b) On testing after completion of job, if desired earth resistance is not obtained, the earthing shall be redone by the contractor & no extra cost will be given to the contractor.

S S CONSTRUCTION COMPANY (BID ID -3434696)

RAJ KAMAL BUILDERS (BID ID -3434805)