Special Repair to certain buildings,toilet and minor work at GE U P M Office under AGE I U BR Delhi Cantt

Amount

Dismantling plain or corrugated steel sheeting any gauage, thickness including Nainital or similar pattern roof covering complete all as specified .

Dismantling timber frame scantling 40 sq.cm and over in section in any position complete all as specified and directed.

Demolition of reinforced cement concrete in beam, staircase, landing chajjas and similar work of any description and in any position not otherwise specifically provided for and rubbish off the premises upto 4 storeys building complete all as specified.

Demolition of brick work built in CM incl all quoins, pillars etc but excl ashlar facings, dressed stone work and precast concrete

Taking down Chowkhats or frames with shutters without taking off shutters from frames exceeding 1.50 Sqm but n.exc 4.00 Sqm complete all as specified.

Excavation in trenches , not exc 1.5 m wide and n exc 1.50 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed

M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregates), as in foundation filling and mass concrete complete all as specified and as directed.

M&L 75 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregates), as in floors complete all as specified and as directed.

M&L for RCC M-25 design mix concrete using 20 mm graded stone aggregate as in foundation including rafts footings , foundations beams, plinth beams, bases for coulmns etc basement slab, undereamed piles and mass concerte all as specified and dirceted

M&L for RCC M-25 design mix concrete using 20 mm graded stone aggregate as in column complete all as specified and dirceted

M&L for RCC M-25 design mix concrete using 20 mm graded stone aggregate as in slabs of any thickness above top of footing including attached pilasters and buttress complete all as specified and dirceted

M&L for RCC M-25 design mix concrete using 20 mm graded stone aggregate as in roof beams complete all as specified and dirceted

M&L for Formwork to sides of flat concrete foundations, footings, bases of coullmns, raft and raft beams, sides and soffits of foundations and plinth beams and similar work complete all as specified and directed

M&L Formwork to sides of pilars post, struts piers , coloumn and stanchion of square , rectunglar or polugonal shape for rough finished surface of concrete complete all as specified and directed

M&L for Formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exc 200mm thick ( horizonla or sloping) for rough finished surface of concrete complete all as specified and directed

M&L for Formwork to sides and soffits of floor or roof beams , beam haunching girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams etc complete all as specified and directed

M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed

Returning , filling in incl spreading levelling and well ramming and watering in layers n exc 25 cm complete all as specified and directed

Removing excavated material soil to a distance exc 250 m but not exc 500 m and deposited where directed complete all as specified and directed

M&L for TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips,

All as per item no 15 above but 5mm dia and over and upto and incl 10mm dia in stirupps spacers and binders complete all as specified and directed

M&L hardcore of broken stone or boulders of guage n.exc 63 mm deposted, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as speciffied and directed

M&L for cement concrete type C-1 (1:3:6) ( 20 mm graded aggregate) as in sub base and plinth protection , complete all as specified and directed

M&L Vitrified jointless Ceramic Dark shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.42 sqm but not exceeding 1.00 sqm , in floors etc. set and jointed in neat ement slurry and pointed in white or coloured cement to match flooring( in any pattern) and jointed with coloured cement matching with surfaces of tiles as in floor 15 mm thick cement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor complete all as specified and directed complete all as specified and directed

All as per item No 21 but in vertical surfaces over 10mm screed in CM 1:4

Material and labour for false ceilings using GI sanp grid system with rool-ormed out of hot drip galvanised steel capings (Powder coated) main runner 38x24mm, cross Tee 29x24mm and wall angle 24x24mm members suspended with 4mm dia GI wire, carry maximum load up to 8.10 Kg/Sqm with 4mm thick asbestos designer ceiling board, prepainted cement board size 595x595x4mm thick any texture suspended from from RCC roof/ structural members of soofits angle cleat cut out etc to ther equired line and shape as per manufactureres recommndations at any height complete all as specified and as directed by AGE (I) , Everest ceiling and grid system Regular T-2430 or its equivalent Make of "Everest/Ramco/Charminar/Armstrong"

M&L for solid designer and decorative PVC Wall Lining of make Rajshree Plastwood and equivalent consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications, complete all as specified & directed by the Engineer-in-Charge

M&L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification, complete all as specified & directed by the Engineer-in-Charge

S&F venetian blinds of superior quality fabric (as approved by the AGE (I)), horizontal/vertical type, with 100mm wide louvers, including supplying and fixing of all arrangements required for proper functioning of the blinds such as aluminium top & bottom guide rails, rollers, chain etc., of make (Vista / Levalor); including taking down of old unserviceable venetian blinds, complete all as specified and as directed by the Engineer-in-Charge.

M&L for 20mm thick granite (of any type) tiles machine cut in skirting/dado laid over 10 mm thick rendering in CM (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of type, complete all as specified.

S&F fully glazed frameless door made out of 12 mm thick toughned glass fixed with stainless steel patch fittings at Top and bottom and floor springs and lock ozone make. The door shall have the lock at bottom and 600 mm length approved stainless steel brush finish handles of 25 mm dia complete. The item also includes providing and fixing 12 mm thick edge polished etched glass as per approved design and pattern and all as per direction of Engineer-in-charge. Make : Saint Gobain or eqvivalent

S&F 15mm dia GI tubing medium grade with all fittings and fixed complete to wall or laid in floors.

S&F 20mm dia GI tubing medium grade with all fittings and fixed complete to wall or laid in floors.

S&F 500 ltr capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I, including dismantling old water tank.

S&F in repairs Rimless Wall hung WC with PP soft close seat cover, hinges, accessories set, size- 360X545X390mm (Cat Part No. FLS-WHT-5953 of Jaquar or equivalent), complete as per manufacturer's direction.

S&F in repairs single piece slim concealed cistern body with Installations Kit & “S-Type” drain pipe connection set for Wall Hung WC (without Flush Control Plate), (Cat part No. JCS-WHT-2400S of Jaquar or equivalent), complete as per manufacturer's direction.

S&F in repairs Control Plate Opal, (Cat part No. JCP-CHR-152415 of Jaquar or equivalent), complete as per manufacturer's direction.

S&F in repairs Under Counter Basin oval shape, size- 590X420X195mm (Cat Part No. CNS-WHT-705 of Jaquar or equivalent), complete as per manufacturer's direction.

S&F in repairs Waste Coupling 32mm Size Full Thread with 130mm height (Cat Part No. ALD-705L130 of Jaquar or equivalent), complete as per manufacturer's direction.

S&F in repairs Bottle Trap (with Internal Partition) 32mm Size with 250mm & 190mm Long Wall Connection Pipes & Wall Flange, Cat Part No. ALD-769L250x190 of Jaquar or equivalent), complete as per manufacturer's direction.

S&F in repairs Single lever Basin mixer (Table mounted) with extractable hand shower dual flow complete with 1.2M long tube with 450mm long braided hoses (Cat Part No. FLR-5177B of Jaquar or equivalent), complete as per manufacturer's direction.

S&F in repairs Urianl without sensor without fixing accessories set, size- 485X 310X 710mm (Cat Part No. URS-WHT-13255 of Jaquar or equivalent), complete as per manufacturer's direction.

S&F in repairs Sensotronic Sensor Flushing Valve for Urinal with Complete Kit (Suitable For Urinal URS-WHT-13255), (Cat Part No. SNR-CHR-51097 of Jaquar or equivalent), complete as per manufacturer's direction.

S&F in repairs curved/rectangular shaped urinal partition with 8mm thick toughned frosted glass, Chrome finish of height 900mm and width 450mm with necessary fittings, complete all as specified.

S&F in repairs Bib Cock with wall flange, (Cat Part No. VGP-81037 of Jaquar or equivalent), complete as per manufacturer's direction.

S&F in repairs Angular stop cock with wall flange, (Cat Part No. CON-059KN of Jaquar or equivalent), complete as per manufacturer's direction.

S&F in repairs Angular stop cock with wall flange two way, Make- Jaquar or equivalent), complete as per manufacturer's direction.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm.

S&F in repairs Hand Shower (Health Faucet) (ABS Body) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook, (ALD-CHR-585 of Jaquar or equivalent), complete as per manufacturer's direction.

S&F in repairs Towel Rack 600mm Long with Lower Hangers, (Cat part No. AKP 35781P of Jaquar or equivalent), complete as per manufacturer's direction.

S&F in repairs Towel Ring Round, (Cat part No. AQN-7721 of Jaquar or equivalent), complete as per manufacturer's direction.

S&F in repairs Soap Dish Holder, (Cat part No. AKP-35731P of Jaquar or equivalent), complete as per manufacturer's direction.

S&F in repairs Soap Dispenser with Glass bottle, (Cat part No. AKP-35735P of Jaquar or equivalent), complete as per manufacturer's direction.

S&F in repairs Paper Holder with Flap Recessed Type (Stainless Steel), (Cat part No. AHS-1553 of Jaquar or equivalent), complete as per manufacturer's direction.

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification, complete all as specified and directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of wood grainprinted PVC sheet reinforced with M.S. Square tube & edges will be painted to match with printed sheet, suppling & fixing in opening as per specification, comlete all as specified and directed.

S&F 150mm long brass barrel tower bolts of extruded section.

S&F 200mm long, brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed.

S&F 150mm extruded brass handles, fabricated type polished.

S&F 125mm long brass hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type C-21.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius in cement mortar 1:6 complete all as specifed and directed

M&L for 15 mm thick rendering on fair faces or brick work or concrete in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed

M&L for 10 mm thick rendering on fair faces or brick work or concrete in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed

M&L for 5mm thick rendering in cement mortar 1:3 finished even and smooth without using extra cement on concrete surface in ceiling complete all as specified and directed

M&L preparation of new plasterd or unplastered concrete surfaces and apply two coat of cement base paint over a coat of primer complete all as specified and directed

M&L for preparation of newly plastered surfaces of wall & apply two coats of oil bound distemper over 1mm thick wall care putty complete all as specified and directed

M&L for preparation of newly plastered surfaces of ceiling l & apply two coats of oil bound distemper over 1mm thick wall care putty complete all as specified and directed

S&F powder coated aluminium three track sliding windows with three sliding shutters (one gauzed shutter including 0.36mm dia and 1.18mm aperture stainless steel wire mesh and two glazed shutter including 4 mm thick plane glass panes) made of aluminium sections not less than 1.1kg per meter for bottom and top tracks, side track 0.98 kg per metre, bottom shutter frame 0.55 kg per metre, top shutter frame 0.47 kg per metre, shutter sides 0.47 kg per metre and interlock sides 0.45 kg per metre including suitable nylon beading, channel, gasket, nylon rollers, Maruthi lock with handles etc complete all as specified and directed.

S&F Powder coated aluminium doors using 96.6 mm X 44.8 mm X 1.60 mm aluminium chowkhat, with 84 mm X 44.7 mm X 1.60 mm section vertical stile, with 101.60 mm X 44.8 mm X 1.60 mm rail mounted on floor spring with mortice lock (Make- Harrison), with aluminium tower bolts 150 mm long (02 nos), sliding bolt 300 mm long (01 no), door handle 150 mm long (02 nos) and fittings all as directed by Engr-in-Charge. Bottom panel with 12 mm thick laminated nova pan and top panel with 5.5 mm thick plain/froasted sheet glass with rubber beading of suitable size, complete all as specified and directed by Engr-in-Charge.

S&F collapsible steel gates, top hund, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as specified , erected in position and securing runners with hold fast and brackets complete as specified and directed by engr-in-charge

M&L for rolled mild steel work curved or straight as in joist, channel, angle, tee sections, flats, fixed independently, rivetting or welding, with/without connecting plates etc, (cut to ordinary length i.e. within 20 mm of the length indicated) using Fe-290 (Gde 165), complete all as specified

M&L for holes drilled up to dia 12 mm and not exc 25 mm dia and countersunk if required up to depth exc 2 mm but not exc 12 mm complete all as specified and directed

S&F mild steel 25 mm dia rag or lewis bolts, screwed one end with hexagonal or square nuts and washehers, the other end enlarged and jagged or lewished exc 30 cm long fixed with RCC foundation complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling screws or cranked bolts other necessary fittings,all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as directed.

Dismantling wall and ceiling board (fibre , pulp , insulation boards/slabs/blankets, any thickness , incldg cover fillets complete all as per specified.

S&F Anodised aluminium snap grid frame work for false ceiling complete all as per specified.

S&F Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturer's instructions complete all as specified and directed.

M&L for Machine pressed precast concrete coloured with glazed finish interlocking paver block any shape and size conferming to IS-15658-2006 of 80mm thickness with glazed finish , M-40 Grade with gray cement and pigment over 50 mm thick sand filling , complete all as specified.

S D Constructions

SHIV INFRA