Repairing Departmental Inspection Vehicles i,e Tata Safari bearing registration No. JK2BD4006, JK01S-5530 , JK01P-3525 and JK01AQ-7543 of machinery Division Kashmir

Amount

Vehicle No :- JK02BD -4006 Providing & fitting of Wiper Motor Assy and wiper Blade Set

Providing and replacement of Engine Oil with filtersSafari The job includes removal of the old engine oil, engine oil filter, air filter and fuel filters and replacing the same with a new ones. All tools and tackles, consumables, and labour required to carry out the job in full in included in the job.

Providing and replacement of Coolant .The job includes removal of the old Coolant and replacing the same with a new ones. All tools and tackles, consumables, and labour required to carry out the job in full in included in the Job

Providing and fitment of front wheel Disc Pad set.

Providing and Replacement of Hand Brake shoes

Denting of side body parts. The job includes removing of side door dents, alignment of front and rear doors. The job also includes checking up the electrical circuit for minor faults.

Vehicle No:- JK01S-5530 Providing & fitting of ECU Engine management system

Providing and replacement of Engine Oil with filters–Mahindra The job includes removal of the old engine oil, engine oil filter, air filter and fuel filters and replacing the same with a new ones. All tools and tackles, consumables, and labour required to carry out the job in full in included in the Job.

Providing and fitting LH OVRM

Providing and fitment of front wheel Disc Pad set.

Vehicle No:- JK01P-3525 Providing and replacement of Engine Oil with filters–Mahindra Scorpio. The job includes removal of the old engine oil, engine oil filter, air filter and fuel filters and replacing the same with a new ones. All tools and tackles, consumables, and labour required to carry out the job in full in included in the Job.

Wheel checking:- The job includes dismantling of all wheels from vehicle and replacing damaged Disc pads( brake shoes , Boot Piston, dust caps , Kit pad Assy, servo kits and bearing and Oil seals and proper greasing of all assemblies and sub assemblies . All tools and tackles, consumables, and labour required to carry out the job in full in included in the Job. The job also includes carrying wheel alignment, balancing and rotation

Door Alignment :The job includes dismantling of RH and LH Door trims from the body and replacements of worn out Door Latch Assembly , Greasing of door hinges and after assembly fitting and alignment of Doors with Vehicle All tools and tackles, consumables, and labour required to carry out the job in full in included in the Job

Self Alternator: The job includes dismantling of self alternator and replacing of damaged rectifier plate armature assembly and bushes .All the tools and tackles required carry out the job in full including the job.

Providing and fixing of Towel Fabric seat covers to all front and rear seats

Providing and Fixing of Window curtains to all front and rear windows

Vehicle No:- JK01AQ-7543 Providing and replacement of Clutch and pressure plate Assembly, Slave Cylinder, cotton piece , grease pack. All tools and tackles and labour required to carry out the job in full in included in the Job

Providing and replacing of Clutch Release bearing

Wheel checking: - The job includes dismantling of all wheels from vehicle and replacing damaged Disc pads ( brake shoes and bearing and Oil seals and proper greasing of all assemblies and sub assemblies . All tools and tackles, consumables, and labour required to carry out the job in full in included in the Job.

Fabrication :- Fabrication of open load Body ( Three side) by way of fabrication of Sides out from , ISA 40x40x5mm ( 40Kgs) , MS Square pipe 40x40x2.6mm (50Kgs ),MS Sheet 1.5mm ( 40Kg) , ISF -20x2mm (05Kgs) Vehicle Dimension 1) Length :- 2200 mm 2) Breadth :-1300 mm Painting:- The Job includes also complete painting of fabricated area with Automotive Paint in white color matching with Existing shade. The job also includes providing and fixing of Retro reflective ,Departmental name address and Logo on Three sides .Details to be provided by Concerned Engineer All tools and tackles, consumables i.e (Welding Electrodes, Grinding Wheels, Primer, Paint Etc), and labour required to carry out the job in full in included in the Job.

M/s SIMAR ENTERPRISES