N I T /4

ITEM NO.: 1 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete..... (INo46-19. PgNo 297) (STATE SSR) Item Spec: (As directed by Engineer in charge)

ITEM NO.: 2 Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc. complete.....(INo46-09, PgNo 296) (STATE SSR) Item Spec: (As directed by Engineer in charge.)

ITEM NO.: 3 Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete.....(INo46-15, PgNo 296) (STATE SSR) Item Spec: (As directed by Engineer in charge.)

ITEM NO.: 4 Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete.....(INo38-26, PgNo 235) (STATE SSR) Item Spec: (As directed by Engineer in charge.)

ITEM NO.: 5 Providing uncoursed rubble masonry of trap/granite /quartzite/gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually, striking joints on un exposed faces and watering etc.complete.....(INo28-01, PgNo 199) (STATE SSR) Item Spec: (Bd.H.1 Page No. 329) RA NO.: 1

ITEM NO.: 6 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC WITHOUT SCADA enabled reversible Drum Type mixer/concrete Batch mix plan: (Pan mixer) etc. complete. With fine aggregate (Crushed sand VS Grade finely washed) (INo24-01 NS, PgNo 175) (STATE SSR) Item Spec: (Bd. E 1 Page No. 287)

ITEM NO.: 7 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm. to 20cm. including watering and compaction etc. complete..... (INo21-37, PgNo 157) (STATE SSR) Item Spec (Bd.A.11 Page No. 263)

ITEM NO.: 8 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete....(INo27-05, PgNo 197) (STATE SSR) Item Spec: (Bd.G.5 Page No. 315)

ITEM NO.: 9 Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete..... (INo42-30, PgNo 277) (STATE SSR) Item Spec: (As directed by Engineer in charge.)

ITEM NO.: 10 Providing and laying ceramic tiles having size 30 cm x 30 cm confirming I.S. 15622/2006 (group D II-A)and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colcur cernent slurry cleaning curing etc. Complete.....(INo33-24, PgNo 215) ( STATE SSR) Item Spec: (Bd.M.12 Page No. 385.)

ITEM NO.: 11 Providing and laying ceramic tiles having size 30 cm. X 30 cm. For dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. Complete.....(INo33-25, PgNo 215) (STATE SSR) Item Spec: (Bd.M.13 Page No. 386.) RA NO.: 6

ITEM NO.: 12 Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc

ITEM NO.: 13 Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting fixing in position, making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete (INo23-02 PgNo 173) (STATE SSR) Item Spec: (Bd.C.3 Page No. 275) RA NO.: 7

ITEM NO.: 14 Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt. Total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min.550 Mpa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. Fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. Cornplete. (weight of profile 4.52 kg/sqm)....(INo38-34, PgNo 236) ( STATE SSR) Item Spec: (As directed by Engineer in charge)

ITEM NO.: 15 Providing and fixing in position powder coated aluminium louvered windows/ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.....(INo39-68, PgNo 259) (STATE SSR) Item Spec: (As directed by Engineer in charge.)

ITEM NO.: 16 Providing, laying and fixing P.V.C. pipe of 110 mm dia with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete..... (INo42-28, PgNo 277) (STATE SSR) Item Spec: (As directed by Engineer in charge.)

ITEM NO.: 17 Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete..... (INo35-14, PgNo 224) (STATE SSR) Item Spec: (As directed by Engineer- in-charge.)

ITEM NO.: 18 Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete..... (INo32-12, PgNo 209) ( STATE SSR) Item Spec: (Bd.L.8 Page No. 370) RA NO.: 8

ITEM NO.: 1 Royalty Charges for RUBBLE. Rate = Royalty + surcharge (2%) (211.95 +4.23216.18 Per Cum).... (INo1-J PgNo 1) (STATE SSR) Item Spec: (As Directed By Engineer Incharge)

ITEM NO.: 2 Royalty Charges for HARD MURUM. Rate = Royalty + surcharge (2%) (211.95 +4.23=216.18 Per Cum)....(INo1-A, PgNo 1) (STATE SSR) Item Spec: (As Directed By Engineer Incharge)

Please Enable Macros to View BoQ information