20 - Internal Painting and other civil works in A-3, B-5, B-11, C-4, C-11, C-16, C-17, and C-18 in University Campus.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 15.23.1 For thickness of tiles 10 mm to 25mm (C-11,C-16 & C-18)

䐠獩慭瑮楬杮搠潯獲‬楷摮睯⁳湡⁤汣牥獥潴祲眠湩潤獷⠠瑳敥牯眠潯⥤猠畨瑴牥椠据畬楤杮挠潨歷慨獴‬牡档瑩慲敶‬潨摬慦瑳⁳瑥⹣挠浯汰瑥⁥湡⁤瑳捡楫杮眠瑩楨〵洠瑥敲⁳敬摡㨠 㔱ㄮ⸲‱晏愠敲⁡″煳洮瑥敲猠湡⁤敢潬੷⠠ⵃㄱ䌬ㄭ‶…ⵃ㠱ꨩ㄀눀㜀ࠀ敄

Dismantling old plaster or skirting raking out joints and cleaning thesurface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Earth work in excavation by mechanical means (Hydraulic excavator)/ means over areas (exceeding 30 cm in depth, 1.5 min width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.

1:4:8 (1 cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derved from natural sources)

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15x10x10cm with cement concrete1:3:6 (1cement : 3 coarses and : 6 graded stone aggregate 20mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 14.2.1 Door chowkhats

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1 mm,of approved brand and manufacturer, over the plastered wall surface of cement 78.35 to prepare the surface even and smooth complete.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 13.99.1 One or more coats on old work

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar1:3 (1cement : 3 coarse sand) and joining with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing angle Iron frames for doors, windows and ventilators of mildsteel Angle sections of size 35x35x5mm, joints mitred and welded by angle iron 35x35x5mm or 35x5mm ftal pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat or approved steel primer, all complete as per the directionof Engineer-In-charge.

Providing and fixing glass strips in joints of terrazo/Cement concrete floors. 11.13.1 40mm wide and 4mm thick

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 10.16.1 Hot finished welded type lubes

Providing and fixing cupboard shuller with 19 mm thick one side decorative and other side balancing lamination f-dctory pressed BWP grade marine ply as per IS 710 of approved brand Including 2 mm thick PVC edge banding tape with hot glue by edge bending machine etc.with auto closing spring loaded hinges (hydraulic type) etc.complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately)

Providing & fixing stainless steel soft closing heavy type telecopic drawer channels of approved make 500mm long with screw etc complete as per direction of Engineer-in- charge.

Providing anfd Fixing stainless steel soft clossing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.

Providing anf fixing ISI marked oxidised M.S sliding door with nuts and screw etc. Complete (Copper oxidised as per IS 1378)

P/F bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

P/F ISI marked IS: 453 oxidised M.S. Double acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378)

P/F ISI marked oxidise M.S. tower bolt black finish, (Barrel type) with necessary screw etc. complete (Copper oxidised as per IS 1378) 9.63.1 250x10 mm

P/F ISI marked oxidise M.S. tower bolt black finish, (Barrel type) with necessary screw etc. complete (Copper oxidised as per IS 1378) 9.63.2 250x10 mm

CC florring

Fiber sheeet

Marble

Moulding

MS tubular frame for door

Profile sheet