SPECIAL REPAIRS TO ROOFING OF BADMINTON COURT AT SOMNATHVATIKA AND CERTAIN PROVN WORKS UNDER GE (WEST), COLABA, MUMBAI

Amount

Dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets in roof coverings complete all as specified and directed.

Supply and fixing pre-painted hot-dip galvalume aluminium-zinc alloy metallic coated Mangalore Tile profile steel sheet as per IS 15965 : 2012 of durability class 3, atmospheric classification category 3, coating class AZ70, 0.50 mm thick of a colour having yield strength of 550 Mpa as in roof covering with effective and overall width 990mm and 1090mm profile height 28mm pitch of 300mm and centre to centre distance between ribs as 200mm fixed with self tapping screws as in chajjas and all other similar works on wooden and steel members upto 04 storeys height of bldg including use of scaffolding and safety measures complete all as specified and as directed.

Supply and fixing Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including use of scaffolding to work at any height of bldgs complete all as specified and directed.

Dismantling Mild steel framed trusses, span not exceeding 10m complete all as specified and directed.

Supply and fixing Mild steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

Supply and fixing Mild steel joist, channel, angle or tee sections, or MS Flats fixed independantly without connecting plates etc Fe 410-W (Gde-E- 250) quality- A (cut to ordinary lengths i.e within 20mm of length indicated) as in frame work for Galvalume sheet roofing / CGI chajjas etc complete all as specified and directed.

Material and labour for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing UPVC rain water gutter size 150mm and thickness 8 mm fixed on walls with help of MS brackets at spacing of 1000mm at any height of bldgs including use of scaffolding complete all as specified and directed.

Supply and fixing 150 mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes and fixed to walls at any height of bldgs including use of scaffolding complete all as specified and directed.

Supply and fixing 150 mm dia bore PVC (SWR) bends with access doors any radius at any height of bldgs including use of scaffolding complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Excavating in trenches in soft/loose soil, not exceeding 1.5m wide & not exceeding 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and getting out complete all as specified and directed.

Material and labour for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 m mean radius, built in CM 1:6 complete all as specified and directed.

Material and labour for 15 mm thick rendering in CM 1:6 on fair faces of brick work and finished the surface even and smooth (without using extra cement) etc. complete all as specified and directed.

Material and labour for providing cement concrete type C2 (1:3:6) 40 mm graded stone aggregate as in surface channels and drains etc. finished surface even and smooth with out using extra cement complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forming moulds, mitered/stopped ends etc. complete all as specified and directed.

Material and labour for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in coping, bed concrete and all other similar works including use of formwork complete all as specified and directed.

Material and labour for providing precast cement concrete type B1 1:2:4 (20 mm graded stone aggregate) set in cement mortar 1:4, in road side kerb stones of any shape & size and all other similar works complete all as specified and directed.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick complete all as specified and directed.

Material and labour for Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Material and labour for RCC Type B-1 , 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, columns and all other similar works complete all as specified and directed.

Material and labour for rubber moulded glossy finished precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-35 Grade with grey cement and pigment (Sample as approved by GE), laid over and including 25mm thick sand cushioning including compaction of paver blocks using surface vibrator complete all as specified and directed.

Material and labour for mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Material and labour for RCC 1:2:4 type B-1 (Nominal mix ) (using 20mm graded stone aggregate) as in precast cover slab fixed in position, tie between two brick walls and all other similar works set in CM 1:4 including use of form work complete all as specified and directed.

Supply and fixing 150 mm dia reinforced cement concrete pipes, class NP2 laid and jointed with collar complete all as specified and directed.

Material and labour for preperation of old / new concrete kerb stone surfaces and applying two coats of retro-reflective enamel paint of any colours and pattern complete all as specified and directed .

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in soft/loose soil, watering and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and directed.

Supply and fixing structural steel work in tubular / square tube trusses including special shaped washer, gusset / bearing plate etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed.

Surface excavation not exceeding 30 cm deep, averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Material and labour for Ready Mixed Cement Concrete (Delivered on Bunker) M- 20 type A-1, 1:1.5:3 (20 mm graded stone aggregate) as in flooring and all other similar works including finishing surface even and smooth with using extra cement complete all as specified and directed.

Material and labour for hard core of broken stone or boulders of gauge not exceeding 63mm, deposited, spread & levelled in layers not exceeding 15cm thick, including watering and well ramming to a true surface complete all as specified and directed. Note:- Volume of hard core after consolidation will be measured and paid.

Filling under floors by earth obtianed from excavation/bringing from out side MD land including spreading, levelling, watering and well ramming excavated earth in layers not exceeding 25 cm complete all as specified and directed.

Material and labour for forming construction joint 30mm deep X 10mm wide with sealing compound grade-A complete all as specified and directed.

Material and labour for preparing newly plastered surfaces of walls/ceilings at any height of bldgs and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat of water based cement primer including use of scaffoldings complete all as specified and directed.

Material and labour for Mild steel angle iron (any size) as in fencing post, including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mess) including all necessary drilling, bolting or reveting etc. complete all as specified and directed.

Material and labour for Mild steel Flat iron (any size) as in ties, including cutting tops to shape as directed, drilling holes, notching for wire etc complete all as specified and directed.

Supply only chain link MS galavanised fencing complete all as specified and directed.

Fixing only chain link fencing including line wires, and mesh size type of standrads, rail straining bolts etc size of mess 100x100mm, 4mm dia wire complete all as specified and directed.

Supply and fixing MS bolts, machine made with hexagonal or square head one end and screwed the other or screwed both ends, not exceeding 5 cm long 12mm dia complete all as specified and directed.

Material and labour for preparing new surfaces of steel and iron work of any description and girth at treated area not exceeding 0.5 Sqm each and treated with Tar/ Coal tar black paint complete all as specified and directed.

Material and labour for use and waste of formwork to sides of concrete foundation, footing base of column, raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter to rough finish surface of concrete flat complete all as specified and directed.

Material and labour for use and waste of formwork to sides of pillars, posts, struts piers, columns and stanchion to rough finish surface of concrete square, rectangular or polygonal complete all as specified and directed.

Material and labour for RCC (1:2:4) type B-1 (nominal mix) using 20 mm graded stone aggregate as in foundations, including rafts, footing foundation beams, plinth beam, base for column, etc basement slab under-reamed piles and mass concrete complete all as specified and directed.

Material and labour for RCC (1:2:4) type B-1 (nominal mix) using 20 mm graded stone aggregate as in Column, Pillars post and struts etc complete all as specified and directed.

Material and labour for 8mm dia TMT bars cut to length, bent to shape required, including cranking bend and binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia for securing with clips complete all as specified and directed.

Material and labour for 5mm dia and over upto and including 10mm dia TMT bars in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bindding with MS wire (annealed ) not less than 0.9mm dia complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise provided for etc. complete all as specified and directed.

Demolition of brick work including all quoins, arches, pillars etc. but excluding ashlar facings built in cement mortar complete all as specified and directed .

Material and labour for brick work (except bricks) built in CM 1:6 complete all as specified and directed. Note: Serviceable bricks obtained from Item No - 51 above to be reused.

Material and labour for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Material and labour for mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete confirming to Fe 410- W (Gde -E -250 quality A) complete all as specified and directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM (1:4) complete all as specified and directed.

Material and labour for 18-20mm thick Granite stone of approved type and colour shade, (sample as approved by GE) machine cut in, skirting/dado laid over 20 mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and directed. .

Removing excavated soil to a distance exceeding 250m but not exceeding 500m and depositing where directed complete all as specified and directed.

Material and Labour for Point wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC heavy duty conduite of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast, Anchor), including PVC insulated and unsheathed (FRLSH) single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed for One light point controlled by one switch. Make of Cable : Havells / Finolex / Indo Asian / Standard, sample as approved by GE.

All as per serial no. 58 here-in-before but for One ceiling fan controlled by one switch & regulator.

All as per serial no. 58 here-in-before but for One 3 pin socket point 5 Amps on same board.

All as per serial no. 58 here-in before but for One 3 pin socket point 5 Amps on independent board.

Supply and fixing socket 2/3 pin 5 Amp complete all as specified and directed. Make: Anchor / Fine / SSK, sample as approved by GE.

Supply and fixing Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed. Make: Anchor / Fine / SSK, sample as approved by GE.

Supply and fixing ceiling rose surface bakelite 65 x 50 mm two to three terminals complete all as specified and directed. Make: Anchor / Fine / SSK, sample as approved by GE.

Supply and fixing stepped type electronic fan regulator 450 watt flush type on the existing phenolic laminated sheet etc. complete all as specified and directed.Make: Anchor / Fine / SSK, sample as approved by GE.

Supply and Fixing suspended type (hanging type), 20 watt LED, 4 feet long, 6500 K, fixed on roof for hanging the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting), one for earthing and including hanging arrangements complete all as specified and directed. Make:Havells cat part no CONSTA544LP20WLED830 or equivalent in Wipro cat part no - LM34-251-XXX-57-XX / Philips cat part no SP824PLED305-5000G50A, sample as approved by GE.

Supply and fixing LED building security light, 45 Watt, 2500 lumens luminaire fixture in IP 65/66 protection level with aluminum pressure die cast reflector with heat shrink LM 6, output of LED lamp efficiency 100 luman per watt after all losses, driver with 4KV surge high and low voltage protection, power factor not less than 0.97, life of LED 50,000 burning hours at L 70, protection against biological eye safety certification and including suitable bracket made out of GI pipe 25mm/40 mm bore, light grade (as per fitting base dia) of approximate length 2m long bent to shape and fixed to wall with two Nos. MS clamps made out of 32 x 6mm thick flat iron with nuts, bolts and washers etc., including connecting up with 2 core 1.5 sqmm PVC insulated PVC sheathed weather proof multi stranded copper conductor cable 1100 volts grade upto junction box and including painting of clamps with two coats of aluminium paint over a coat of approved primer complete all as specified and directed. Make:- Wipro Cat pat No LR02-501-XXX-57-XX / Havells Cat pat No ENDURACITYLINERNEXGENL45W LED757BASYBOPC / Philips cat part no - BRP-409LED 040 CWHOMRFGS1PSUGR, sample as approved by GE.

Supply and fixing star rating ceiling fan 1400 mm sweep, 240 Volts, 50Hz AC supply complete White colour with 3 blades and all required accessories for fixing / hanging at any height of bldg complete all as specified and directed. Make : Havells Cat Pt No Velocity ES-50 ISI Mark or equivalent model in Usha / Khaitan / Orient, sample as approved by GE.

Supply, laying, connecting and testing cable XLPE Insulated , screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sq mm 2 core Cable complete all as specified and directed. Make of Cable : Havells / Finolex / Indo Asian / Standard, sample as approved by GE.

Material and labour for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm thick after laying, including spreading, leveling and hand punning complete all as specified in SSR Part-I and as directed. Note: Punned thickness shall be measured and paid.

Supply and laying unreinforced precast concrete cable cover, class LV, type -1, Size 250mm x 150mm x 40mm complete all as specified and directed.

Material and labour for GI tubing 50 mm dia, light grade galvanized with all connecting items (like suitable size of clamps, angle, nut & bolts etc) for holding of pipe with pole complete all as specified and directed. Make : Tata / Swastik / Jindal sample as approved by GE.

Material and labour for cutting existing hard standing by manual method, 0.45 m width and 0.6 m in depth for inserting galvanized tubing for cable protection, refilling the same after laying of pipe, with soil, stone aggregate etc., as obtained from excavation, making good top surface with 100mm thick PCC (1:3:6), type C-1 using 20mm graded stone aggregate and removal of excess material if any, complete all as specified and directed. Note:- Cost of taking out of old GI pipe is deemed to be included in the unit rate quoted.

Supply and fixing / laying cable in repairs, PVC insulated screened PVC bedded, unarmoured, sheathed, electric power cables 1100 volts grade with stranded copper conductor of size 1.5 Sqmm 3 core with and including non metalic PVC FR, heavy duty conduit of suitable size (20mm dia or more), with shaddle complete all specified and directed. Make of Cable : Havells / Finolex / Indo Asian / Standard, sample as approved by GE. Note: Mode of measurement 1.5 Sqmm 3 core cable with PVC conduite shall be measured as one length.

Supply and fixing DB vertical type 4 way TPN, double door load line powder coated complete alongwith 200 Amp rated Bus bar fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Note: Thimble/lugs of rating of MCCB should be used with wire for fixing in the MCB DB. Make : Havells / Legrand / Indo asian, sample as approved by GE.

Supply and fixing MCCB 100 Amp, 4 pole, 415 V, Adjustable type, with breaking capacity 36 KA complete all as specified and directed. Make: Havells / Legrand / Schneider / MDS, sample as approved by GE.

Material and labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below the normal ground level connected to galvanised earth strip 25×4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron. Earth strip protected by GI pipe 32mm bore (medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B-1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for lifting made out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as specified and directed and earth testing on completion.

Supply and fixing MCB SP, 240 volt, 6 to 32 Amps complete all as specified and directed. Make: Havells / Legrand / Schneider / MDS, sample as approved by GE.

Supply and fixing MCB SPN, 240 volt, 40 Amps complete all as specified and directed. Make: Havells / Legrand / Schneider / MDS sample as approved by GE.

Supply and fixing sheet metal enclosures, double door, for DBs when MCBs to be used 240 volts 4 way with 200 Amps rated bus bar single pole and neutral fixed on wall by cutting chasing and making good to the disturbed surfaced board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Make : Havells / Legrand / Indo asian, sample as approved by GE.

Supply and fix sheet metal enclosures, double door, for DBs when MCBs to be used 240 volts 8 way with 200 Amps rated bus bar single pole and neutral fixed on wall by cutting chasing and making good to the disturbed surfaced board in and including copper lugs/thimbles duly crimped for connection complete all as specified and directed. Make : Havells / Legrand / Indo asian, sample as approved by GE.

Anil Industrial Corporation

ASHOK CONSTRUCTION

Bidder Name

ASHOK CONSTRUCTION

Anil Industrial Corporation

SAI SERVICE