GE/PNH-35/2025-26

Amount

Opening of air/water cooled Diesel Engine Generator Sets upto 40 KVA capacity by screwing nuts, bolts and servicing of DG set with complete servicing, checking of oil, coolant, v belts, greasing & oiling of parts and topping up, cleaning the inner and outer body, tank and radiator etc by removing sludge etc and re-assembling the DG set after comprehensive maintenance as per B check by providing qualified and experienced staff at site and should be adequate to perform routine maint, observe and rectify the minor faults if any without any extra cost including all necessary connections, connecting to alternator including commissioning and testing complete all as specified and directed. NOTES:- (i) Engine oil, oil filter, coolant will be measured and paid separately under relevant items. (ii) 'B' check shall be carried out by the authorised dealer of kirloskar/crompton greaves and certificate of 'B' check shall be produced by contractor from authorised dealer of make specified (iii) Testing equipments required for B check shall be contractor's responsibility.

All as per srl item No. 1 above but for capacity 62.5/63 KVA DG set complete all as specified and directed.

All as per srl item No. 1 above but for capacity 100/125 KVA DG set complete all as specified and directed.

All as per srl item No. 1 above but for capacity upto 40 BHP DG set complete all as specified and directed.

Dismantling and taking out of Diesel Engine Generator Sets of 40 KVA capacity air/water cooled, situated at various pump houses/power houses and shifting to authorised work shop at Jammu for major overhauling by replacing the spare parts as required such as piston with pin & clips, piston ring set, cylinder liner, 'O' rings, cylinder head with bolts, belts, nozzle with holder all type of bush & bearings, connecting rod assy, valves with guide, rocker arm with cover, oil seals, slip rings, FIP assy, carbon bush incl any other parts reqd to repair the engine etc and re-installation at the original location including all necessary connections, connecting to alternator including commissioning and testing complete all as specified and directed. NOTES:- (i) Spare parts will be measured and paid separately under relevant items. (ii) Unit rate shall deemed to include Transport from site to Jammu workshop & back to site including neccessary T&P complete. (iii) The quoted rates shall also include labour element required for fixing of new spare parts under relevant item.

All as per srl item No. 5 above but for capacity 62.5/63 KVA DG set complete all as specified and directed.

All as per srl item No. 5 above but for capacity 100/125 KVA DG set complete all as specified and directed.

All as per srl item No. 5 above but for capacity upto 40 BHP DG set complete all as specified and directed.

Supply only following spare parts as per existing make & model suitable for DG set upto 40 KVA

Lubricant oil filter assembly

Lubricant oil filter element

Fuel filter suitable for engine

Fuel filter housing suitable for engine

Over flow pipe assembly suitable for engine

Fan Belt 1158 4 PK/1160 4 PK suitable for engine

Hose pipe for air cleaner including hose clips suitable for engine

Fuel pipe including clips suitable for engine

Turbo charger center assembly complete impeller and turbine

Lubricant oil pump assembly complete impeller and turbine

AVR card suitable for engine

Water separator for engine

Radiator assembly suitable for engine

PLC unit as per approved sample

LLOP switches per approved sample

Injector as per approved sample

Supply only following spare parts as per existing make & model suitable for DG set of capacity 62.5/63 KVA

Lubricant oil filter assembly

Lubricant oil filter element

Fuel filter suitable for engine

Fuel filter housing suitable for engine

Over flow pipe assembly suitable for engine

Fan Belt 1158 4 PK/1160 4 PK suitable for engine

Hose pipe for air cleaner including hose clips suitable for engine

Fuel pipe including clips suitable for engine

Turbo charger center assembly complete impeller and turbine

Lubricant oil pump assembly complete impeller and turbine

AVR card suitable for engine

Water separator for engine

Radiator assembly suitable for engine

PLC unit as per approved sample

LLOP switches per approved sample

Injector as per approved sample

Supply only following spare parts as per existing make & model suitable for DG set of capacity 100/125 KVA

Lubricant oil filter assembly

Lubricant oil filter element

Fuel filter suitable for engine

Fuel filter housing suitable for engine

Over flow pipe assembly suitable for engine

Fan Belt 1158 4 PK/1160 4 PK suitable for engine

Hose pipe for air cleaner including hose clips suitable for engine

Fuel pipe including clips suitable for engine

Turbo charger center assembly complete impeller and turbine

Lubricant oil pump assembly complete impeller and turbine

AVR card suitable for engine

Water separator for engine

Radiator assembly suitable for engine

PLC unit as per approved sample

Injector as per approved sample

Taking out radiator assembly of 100 to 125 KVA capacity DG sets of any make for repair by flushing out of coolant, cleaning, brazing/soldering or welding etc to stop the leakage of coolant and refixing the same after repair for smooth and efficient functioning, complete all as specified and directed by Engr-in-Charge.

Taking out alternator of 40 KVA DG set of any make and rewinding of rotor coil with super enamelled copper wire of suitable gauge, varnishing, changing insulating material, assembling, testing and connecting to DG set complete all as specified and directed by Engr-in-Charge. Note:- Rates quoted by contractor deemed to be included the rates for tranportation of alternator from site to workshop & back.

All as per srl item No. 60 above but for capacity 62.5/63 KVA DG set complete all as specified and directed.

All as per srl item No. 60 above but for capacity 100/125 KVA DG set complete all as specified and directed.

Taking out alternator of 40 KVA DG set of any make and rewinding of starter/field coil with super enamelled copper wire of suitable gauge, varnishing, changing insulating material, assembling, testing and connecting to DG set complete all as specified and directed by Engr-in-Charge. Note:- Rates quoted by contractor deemed to be included the rates for tranportation of alternator from site to workshop & back.

All as per srl item No. 63 above but for capacity 62.5/63 KVA DG set complete all as specified and directed.

All as per srl item No. 63 above but for capacity 100/125 KVA DG set complete all as specified and directed.

Taking out cylinder head, grinding of valve sheets and polishing with abrasive parts to valve sheets of 15 to 140 KVA DG set of any type complete all as specified and directed by Engineer-in-Charge.

Taking down FIP for overhauling by replacing all internal worn out parts & calibration of FIP complete of up to 140 KVA DG set of any type by authorised dealer complete all as specified and directed.

M&L for replacement of Old battery 12 volt, 90 AH, maintenance free complete all as specified and directed. Make: Exide/ Amaron

M&L for replacement of Old battery 12 volt, 150 AH, maintenance free complete all as specified and directed. Make: Exide/ Amaron

M&L for replacement of Old battery 12 volt, 180 AH, maintenance free complete all as specified and directed. Make: Exide/ Amaron

M&L for Special engine oil 20 W, 40 grade all as recommended by manufacturer for first filling in the new /repaired DG sets complete all as specified and directed Make : Kirloskar/ Castrol

M&L for Coolant concentrate for filling in radiator of DG set complete all as specified and directed. Make: Castrol or equivalent approved make as approved by GE.

Taking out self starter from Gen set for repair and rewinding with super enamelled copper wire of suitable gauge, varnishing, carbon bushes, bearing, gears etc as per existing incl replacement of all necessary parts as reqd for repair of self of capacity of DG set upto 125 KVA complete all as specified and directed by Engr-in-Charge.

All as per srl item No. 73 above but for alternator, 12 volt dynamo for charging of battery upto 125 KVA DG set complete all as specified and directed.

Supply and laying in trenches or passing through pipe/walls 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 185 Sqmm 3.5 core including taking down old/ unsv cable any type complete all as specified and directed.

All as per srl item No. 75 above but for cable of size 120 sqmm, 3.5 core complete all as specified and directed.

All as per srl item No. 75 above but for cable of size 95 sqmm, 3.5 core complete all as specified and directed.

All as per srl item No. 75 above but for cable of size 70 sqmm, 3.5 core complete all as specified and directed.

All as per srl item No. 75 above but for cable of size 50 sqmm, 3.5 core complete all as specified and directed.

All as per srl item No. 75 above but for cable of size 35 sqmm, 3.5 core complete all as specified and directed.

S&F in repair Earthing in replacement for poles and other machinery/eqpt using GI strip as earth lead and MS galvanized steel earth plate electrode 600x600x 6.3mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate is not less than 1.5 mtr below normal ground level connected to galvanized iron strips 32x6mm with GI pipe, nuts, bolts and washers complete upto and PCC pit of required size in PCC 1:2:4 type B1 and RCC cover with frame, charcoal, common salt15cm at round the earth plate watering pipe 20mm med grade/galvanized and 40mm dia GI pipe light grade for GI strip protected steel with funnel complete all as specified and directed as shown in electrical plate No 3 of SSR Part-I 2009.

M&L for replacement of AMF panel/LT panels incl wiring, contracor, relays, MCBs, welding of doors, fixing of hinges brazing complete all as specified and directed

M&L for replacement of off-load change over switch 63 amps, 415 V, 4 pole front handle type as per site requirement, complete all as specified and directed

M&L for replacement of off-load change over switch 100 amps, 415 V, 4 pole front handle type as per site requirement, complete all as specified and directed

M&L for replacement of off-load change over switch 200 amps, 415 V, 4 pole front handle type as per site requirement, complete all as specified and directed

M&L for painting to DG set of any make/size incl base frame complete by spraying with two coats of synthetic enamel paint of first quality paint over a coat of red oxide primer after and incl complete removal of old paint and primer by scratching, rubbing and marking SM No., complete all as specified and directed by Engr-in-Charge.

M&L for complete servicing and repair of Split type AC 1.5/2 Ton capacity incl taking down of air conditioner, servicing and cleaning of all accessories, oiling of fan motor, checking of wiring connections and re-fixing in the same in position and testing complete all as specified and directed by Engr-in-Charge. Note:- Unsv accessories will be measured and paid seperately under respective items of Sch

Supply only Hermatic sealed compressor unit with new factory made sealed compressor unit, single phase electrically operated on 240 V suitable for Split AC 2.0 T capacity complete all as specified and directed.

Supply only Hermatic sealed compressor unit with new factory made sealed compressor unit, single phase electrically operated on 240 V suitable for Split AC 1.5 T capacity complete all as specified and directed.

Supply only Fan/blower electric motor single phase 230 V complete for inner unit complete all as specified and directed.

Supply only Fan/blower electric motor single phase 230 V complete for outer unit complete all as specified and directed.

Supply only Starting capacitor of suitable capacity complete all as specified and directed.

Supply only Running capacitor of suitable capacity complete all as specified and directed.

Supply only Overload protection of suitable capacity complete all as specified and directed.

Supply only Drain pipe for Split unit PVC 20mm dia complete all as specified and directed.

Supply only Fan blade of suitable size for outer unit complete all as specified and directed.

Supply only Remote control kit complete for Split type AC complete all as specified and directed.

Supply only Condencing unit of Split type AC 1.5/2 Ton capacity with complete accessories (Outdoor type) complete all as specified and directed.

Supply only Cooling unit complete suitable for 1.5/2 Ton Split type AC with complete accessories (Indoor type) complete all as specified and directed.

M&L for complete servicing and repair of Window type AC 1.5/2 Ton capacity incl taking down of air conditioner, servicing and cleaning of all accessories, oiling of fan motor, checking of wiring connections etc and re-fixing in the same in position testing complete all as specified and directed by Engr-in-Charge. Note:- Unsv accessories will be measured and paid seperately under respective items of Sch

Supply only Hermatic sealed compressor unit with new factory made sealed compressor unit, single phase electrically operated on 240 V suitable for Window AC 2.0 T capacity complete all as specified and directed.

Supply only Hermatic sealed compressor unit with new factory made sealed compressor unit, single phase electrically operated on 240 V suitable for Window AC 1.5 T capacity complete all as specified and directed.

Supply only Capacitor of suitable capacity for Window AC 1.5/2 Ton capacity complete all as specified and directed.

Supply only Auto cut thermostat of suitable capacity for window AC 1.5/2 Ton complete all as specified and directed.

Supply only Overload protection for Window type AC 1.5/2 ton capacity complete all as specified and directed.

Supply only Grill for window AC of suitable size/shape /model as required at site complete all as specified and directed.

Supply only Fan blade of suitable size for window type AC unit complete all as specified and directed.

Supply only Fan/blower electric motor single phase 230 V complete all as specified and directed.

M&L for complete servicing and repair of Water Cooler any capacity, servicing and cleaning of all accessories, oiling of fan motor, checking of wiring connections and re-fixing in the same in position testing complete all as specified and directed by Engr-in-Charge. Note:- Unsv accessories will be measured and paid seperately under respective items of Sch

Supply only Hermatic sealed compressor unit with new factory made sealed compressor unit, single phase electrically operated on 240 V suitable for Water cooler 40/80 Ltrs complete all as specified and directed.

Supply only Hermatic sealed compressor unit with new factory made sealed compressor unit, single phase electrically operated on 240 V suitable for Water cooler 60/120 Ltrs complete all as specified and directed.

Supply only Fan/blower electric motor single phase 230 V complet for water cooler 40/80 or 60/120 Ltrs capacity water cooler complete all as specified and directed.

Supply only Running capacitor of suitable capacity complete all as specified and directed.

Supply only Starting capacitor of suitable capacity complete all as specified and directed.

Supply only Auto cut thermostat switch for water cooler complete all as specified and directed.

Supply only Overload protector for water cooler of any capacity complete all as specified and directed.

Supply only Fan blade of suitable size complete all as specified and directed.

Supply only Push cock/soft closing tap brass chromium plated of size 15 mm complete all as specified and directed.

Supply only PVC connection pipe 600 mm long, both end screwed for water cooler complete all as specified and directed.

Supply only ball valve PVC 15mm size for water cooler 40/80 ltr capacity complete all as specified and directed.

M&L for complete servicing and repair of refrigerator/deep freezer of any capacity, servicing and cleaning of all accessories, oiling of fan motor, checking of wiring connections, and re-fixing in the same in position testing complete all as specified and directed by Engr-in-Charge. Note:- Unsv accessories will be measured and paid seperately under respective items of Sch

Supply only Hermatic sealed compressor unit with new factory made sealed compressor unit, single phase electrically operated on 240 V suitable for Refrigerator 165 Ltrs capacity complete all as specified and directed.

Supply only Hermatic sealed compressor unit with new factory made sealed compressor unit, single phase electrically operated on 240 V suitable for Refrigerator 286/310 Ltrs capacity complete all as specified and directed.

Supply only Auto cut thermostat switch for Refrigerator defrosts type complete all as specified and directed.

Supply only Overload protectors for regrigerator upto 310 Ltrs capacity complete all as specified and directed.

Supply only Copper strainer filter for reftrigerator complete all as specified and directed.

Supply only Relays suitable for refrigerators upto 310 ltr capacity complete all as specified and directed.

Supply only Door switch for refrigerator complete all as specified and directed.

Supply only Door spring for refrigerator complete all+B138:B141 as specified and directed.

Supply only Freezer chest door suitable for 286/310 Ltr capacity complete all as specified and directed.

Supply only Magnetised door lock rubber strip 'D' type for Refrigerator 286/310 Ltr cacpacity complete all as specified and directed.

Supply only Evaporator coil assembly 165 ltrs capacity regrigerator with copper pipe complete all as specified and directed.

Supply only Evaporator coil assembly 266/310 ltrs capacity Refrigerator with copper pipe complete all as specified and directed.

Supply only Fan motor for chiller unit as per existing make complete all as specified and directed.

Supply and filling gas charging required to the System of suitable type R-34/12/32 /R22 or as per existing at site complete all as specified and directed.

Supply and filling gas charging required to the System of suitable type 134a or as per existing at site complete all as specified and directed.

S&F in repair base tray of window type AC 1.5/2 Ton capacity unit complete all as specified and directed including the following:- (a) Removing of compressor condenser, wiring kit, from base tray (b) Fixing of new base having all fittings/fixtures to accommodate all accessories made out of MS sheet 1.6mm thick duly painted. (c) Carrying out the nitrogen pressure for 24 hrs (d) Carrying out the vaccuming and gas charging to unit. Note:- Gas will be measured and paid seperately under respective items of Sch

S&F in repair base of water cooler of any capacity unit complete all as specified and directed including the following:- (a) Removing of compressor condenser, wiring kit, from base tray (b) Fixing of new base having all fittings/fixtures to accommodate all accessories made out of MS sheet 1.6mm thick duly painted. (c) Carrying out the nitrogen pressure for 24 hrs (d) Carrying out the vaccuming and gas charging to unit. Note:- Gas will be measured and paid seperately under respective items of Sch 'A'

Supply and fixing in repair PVC insulated flexible cable 3 core with multistranded copper conductors round shaped sheathed for 1100 volts grade of size 4.00 Sqmm complete all as specified and directed.

Supply and fix in repair capillary copper tube for window , split, water cooler, refrigerator complete all as specified and directed.

S&F Sub main wiring with single core cable 2x 6 sq mm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including surface PVC casing caping medium grade alongwith 1x 6 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including taking down old unsv sub main wiring of any type, complete all as specified and directed. Note: 3 run of 6 sqmm, and one run of pvc conduit/casing caping shall be measured as one unit.

S&F in repair Plug & Socket DB, CRCA Sheet steel, powder coated, with metal plug & socket 3 pin with 32 Amps MCB SP complete all as specified and directed.

Taking down old unsv street light fittings any type from pole/ wall/ other similar situation and refixing, re-connecting the same in existing position after carrying out necessary repair/ replacement of unsv accessories to make the fittings functional, complete all as speecified and directed. Note:-Accessories required to make the fittings functional shall be measured & paid seperately as supply only under relevent items.

Supply only the following accessories to be incorporated for repair of street light fittings taken out under item above are as under:-

LED driver for street light fittings of 25 to 35 watt capacity complete all as specified and directed.

LED driver for street light fittings of 40 to 60 watt capacity complete all as specified and directed.

LED driver for street light fittings of 70 to 90 watt capacity complete all as specified and directed.

Glass cover for street light fittings upto 120 watt capacity complete all as specified and directed.

S&F thermo plastic street light weather proof, out door type junction box of size 200mmx 160mm x 98mm complete with 4 way connector-01 No, 6 Amps SP MCB-01 No, easily openable and having locking arrangement including incoming and out going cable holes with fixing MS clamp and water tight polymide cable gland for each connection with & including taking down old unsv junction box, complete all as specified and directed.

Excavation in trenches n.exc 1.5M wide and n.exc 1.50M in depth for taking up or laying of under ground cable in soft/loose soil and getting out complete all as specified and as directed.

Returning, filling soil in trenches including spreading levelling, watering and well ramming in layers n.exc 25 cm complete all as specified and as directed.

Removal excavated soil not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point all as specified and as directed.

Supply and laying sand river for cushioning with layers of sand 8 cm before laying of cable and 15 cm after laying of cable (total 23 cm) in trenches, duly punning to a thickness of 18 cm complete all as specified & directed. ( Note: Thickness after punning shall be measured for payment )

Supply and laying burnt best quality locally available bricks laid in trenches perpendicular to UG cable for cable protection complete all as specified and as directed.

S&F in repair 40mm bore galvanised steel water tubing, light grade including all fittings laid in trenches/ fixed to pole/ along wall/ floor etc for protection of cable/ strip including fixing to pole with M.S. clamp, nuts, bolts etc complete all as specified and as directed.

M&L for making bore under road/cement path/hard standing/taxi track for providing 40 mm FI pipe, both end socketed for passing armoured cable and incl making good the disturbed surface, complete all as specified and as directed.

Supply and laying in trenches or passing through pipe 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 25 Sqmm 3.5 core including taking down old/ unsv cable any type complete all as specified and directed.

Supply and laying in trenches or passing through pipe 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 16 Sqmm 4 core including taking down old/ unsv cable any type complete all as specified and directed.

Supply and laying in trenches or passing through pipe 1100 volts grade armoured, heavy duty XLPE electric cable with aluminium conductor of size 10 Sqmm 2 core including taking down old/ unsv cable any type complete all as specified and directed.

Supply & fix PVC insulated, 1100 volts grade, stranded aluminium conductor cable 2.5 Sqmm, twin core, connecting from Street light junction box to light fittings including taking down old/ unsv cable any type complete all as specified and directed.

S&F in repair PVC conduit/pipes 15 mm dia and fixed with the pole by clamping / saddling for protection of connecting wires, connection from junction box to light fittings, including taking down old pipe any type complete all as specified and as directed.

Supply and fixing in repair LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing in repair LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Supply and fixing in repair LED street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing in repair LED street light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing in repair energy efficient LED flood light 50 watt 230 V AC, 50 Hz with ingress protection, CRI > 70, PF < 0.9, minimum 25000 burning hours, LM-80, lumen efficiency > 100 lumen/watt, THD > 20, outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp and connecting with twin core twisted flexible copper conductor cable with all necessary staging etc complete all as specified and directed.

Supply and fixing in repair energy efficient LED flood light 100 watt 230 V AC, 50 Hz with ingress protection, CRI > 70, PF < 0.9, minimum 25000 burning hours, LM-80, lumen efficiency > 100 lumen/watt, THD > 20, outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp and connecting with twin core twisted flexible copper conductor cable with all necessary staging etc complete all as specified and directed.

S&F street light bracket made out of GI tubing 40mm bore, medium grade, 1.5 metre long bent to shape as directed, including suitable MS clamp of MS Flat with MS bolts, nuts and washer fixed to steel tubular pole/PCC pole duly painted with two coats of aluminium paint including taking down u/s bracket any type all as specified and as directed.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminum conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart incl flat or circular of size of aluminum conductor 6 sq mm stranded conductor including taking down old UNSV cable complete all as specified and directed.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminum conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart incl flat or circular of size of aluminum conductor 4 sq mm stranded conductor including taking down old UNSV cable complete all as specified and directed.

Supply and fixing 1100 Volts grade heavy duty cable PVC insulated aluminum conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart incl flat or circular of size of aluminum conductor 10 sq mm stranded conductor including taking down old UNSV cable complete all as specified and directed.

S&F in repair of aluminium strip 25 x 3.15mm with saddles and fixing screws, insulators rawal plugs etc for conductor for roof and fixed on wall upto test point complete all as specified and directed.

S&F in repair of copper strip 20 x 3.15mm with saddles and fixing screws, insulators rawal plugs etc for conductor for roof and fixed on wall upto test point complete all as specified and directed.

S&F in repair of galvanized iron strip 32 x 6mm fixed with saddles & fixing screws, PVC dash fastners, insulators fixed from test point to earth on walls or burried in ground / drawn into hume pipe complete all as specified and directed.

S&F in repair of single pointed air termination aluminium rod 12mm dia, 300 mm long complete all as specified and directed.

S&F in repair of test point terminal block made of gun metal or phosphorous bronze 75 x 75 x 25mm of 6mm thickness drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head brass screws including box of size 90 x 90 x 90mm made of 1.6mm plain sheet and screwed to wall for protection of test point complete all as specified and directed.

Taking out motorised/manual handle type high mast light fittings situated at a height of 15 to 20 m and refixing after necessary repairs incl all necessary staging etc for cleaning of perplex covers etc , tightening of loose connections on poles/walls and replacing of worn out parts and making the fitting functional and entire satisfaction of EIC, complete all as specified and directed. Note: Quoted rate shall deemed to be inclusive of any minor spare parts replaced for functioning

Taking out burnt winding of 3 phase power tool electric motor of high mast light fittings from any position and rewinding with super enamelled copper wire of existing size/gauge and varnishing, providing insulating paper and sleeves etc and testing for proper functioning on reinstating, complete all as specified and directed. Note: Quoted rate shall deemed to be inclusive of any minor spare parts replaced for functioning

Supply and fixing steel wire hemp rope, 8 mm dia by taking out damaged rope and other minor parts suitable for high mast fittings 15 -20 m high viz D clamps, nuts, bolts, washers etc and replacement as needed and making the installation serviceable and testing for proper functioning on re-instating, complete all as specified and directed. Note: Quoted rate shall deemed to be inclusive of any minor spare parts replaced for functioning

M&L for complete servicing and repair of solar water heating system of any capacity, servicing, cleaning or replacement of all accessories and re-fixing in the same in position, testing complete all as specified and directed by Engr-in-Charge. Note:- Unsv accessories will be measured and paid seperately under respective items No of Sch as supply only

Supply only solar water heater collector FPC type screw less technology suitable for existing solar water heating system, ISI marked complete all as specified and as directed.

Supply only solar collector glass suitable for existing solar water heating system complete all as specified and as directed.

Supply only Glycol for solar water heating system complete all as specified and as directed.

Supply only solar collector with copper brazing complete all as specified and as directed.

Supply only heating element of capacity 3 KW, ISI marked suitable for existing solar water heating system complete all as specified and as directed.

Supply only make up tank of 5 Ltr capacity for existing solar water heating system complete all as specified and as directed.

Supply only gasket and end joints suitable for existing solar water heating system complete all as specified and as directed.

M&L for complete servicing and repair of RO Plant of any capacity, servicing, cleaning or replacement of all accessories and re-fixing in the same in position, testing complete all as specified and directed by Engr-in-Charge. Noe:- Unsv accessories will be measured and paid seperately under respective items No of Sch

Supply only micron cartridge filter sponge 2" x 10" of 4 micron suitable for existing RO plant complete all as specified and directed.

Supply only RO membrane concealed type, 75 GLD suitable for existing RO plant complete all as specified and directed.

Supply only pressure booster pump suitable for existing RO plant, 24 volt DC complete all as specified and directed.

Supply only primary sedimentation filter suitable for existing RO plant, complete all as specified and directed.

Supply only post silver activated carbon cartridge for improvement of water taste, complete all as specified and directed.

Supply only SMPS 24 volt DC adopter suitable for any type/capacity of RO water purifier, complete all as specified and directed.

Supply only solenoid switch (water level controller) suitable for any type/capacity of RO water purifier, complete all as specified and directed.

Cleaning of storage tank of solar heating system of any capacity/ size alongwith complete glass tubes for inside/outside solar panel for smooth and efficient functioning of system complete all as specified and directed. Note:- (a) Any damage including glass parts/solar tubes/solar panel as solar water heating system during the cleaning process will be make good/replaced by contractor, cost of same deemed to be included in the rate quoted (b) All rubber parts or minor hidden parts such as PVC elbow, joint, plug etc shall be replaced by contractor for efficient functioning of system and cost of same deemed to be included in the rate quoted

Removing of old paint from the complete structure related to solar water heating system, by scrubbing with emery paper and applying one coat of red oxide primer and two coats of synthetic namel paint complete all as specified and directed.

Cleaning of HDPE water storage tank from inside and outside for smooth and efficient function of system & removing scale/dirt from inlet/outlet pipe complete all as specified and directed.

Supply and fix in replacement of thermostat switch suitable for solar water heater of size 150 litre to 300 litrer, complete all as specified and directed. Note: Make and model of thermostat shall be as per sample available at site.

S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 4 ways built in bus bars suitable for 240 volts, AC, 50 Hz , including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.

S&F in repair sheet metal enclosure for DBs, SPN double door (IP43), 8 ways with 200 amps rated bus bar suitable for 240 volts, AC, 50 Hz, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning complete all as specified and directed.

S&F in repair MCB SPN 5-40 amps 415 volts 10 KA 'C' series, complete all as specified and directed.

S&F in repair MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series complete all as specified and directed.

S&F in repair MCB isolator SPN 63 amps 415 volts 10 KA 'C' series, finger proof terminal, bi connect termination, label holder, 35 sqmm terminal capacity, insulated sliding shutter, large two position dolly, ISI marked, complete all as specified and directed.

Supply and fixing in replacement heating element of capacity 2 KW, ISI marked suitable for existing size, type & make of geyser complete all as specified and as directed.

Supply and fixing in replacement heating element of capacity 1.5 KW, ISI marked suitable for existing size, type & make of geyser complete all as specified and as directed.

Cleaning of solar collector complete in all respect including testing complete all as specified and as directed.

M&L for Disconnecting electric & water connection to geyser of capacity 25/35/50 litr, taking down from existing position, dismantling and inspecting all the parts for its serviciability, cleaning of serviceable parts i.e. base assembly, connecting lead, thermostat, electric contact, electric wiring, indicators, safety valves etc re-fixing in the same in position, testing complete all as specified and directed by Engr-in-Charge. Notes: (i) The defective parts to be replaced shall be measured and paid separately under relevant items of Sch 'A' as supply only (ii) Cost of minor items i.e. screws, nuts, bolts etc shall be deemed to be included in this item

Supply only thermostat, ISI marked suitable for existing size, type & make of geyser complete all as specified and as directed.

Supply only indicator lamp suitable for existing size, type & make of geyser complete all as specified and as directed.

Supply only geyser safety valve suitable for existing size, type & make of geyser complete all as specified and as directed.

Supply only new base assembly with inlet and outlet pipe made out of steel sheet with gasket and proper size of nuts, bolts and washer etc suitable for 25 litres capacity of geyser complete all as specified and as directed.

Supply only new base assembly with inlet and outlet pipe made out of steel sheet with gasket and proper size of nuts, bolts and washer etc suitable for 35/50 litres capacity of geyser complete all as specified and as directed.

Supply only PVC pipe connection of heavy duty for inlet, outlet connection suitable to withstand the pressure and temperature complete all as specified and as directed.

Supply only aluminium/chromium type flexible connection, heavy duty for inlet, outlet connection suitable to withstand the pressure and temperature complete all as specified and as directed.

Supply only inner tank made out of steel sheet conforming to IS, suitable for 25 litres capacity of geyser, vertical type complete all as specified and as directed.

Supply only inner tank made out of steel sheet conforming to IS, suitable for 35/50 litres capacity of geyser, vertical type complete all as specified and as directed.

Supply only proper glass wool filling in between inner and outer tank of geyser of 25/50 litrs capacity of any make/type complete all as specified and as directed.

Supply only on return valve made out of brass fixed in vertical position of suitable dia complete all as specified and as directed.

VIKAS ENTERPRISES (BID ID -3341258)

M/S GURU DEV BUILDERS (BID ID -3342695)

R C TRADERS (BID ID -3342781)

M/S MAHALUXMI BUILDERS (BID ID -3342873)

M/SHansrajbuilder (BID ID -3342926)

K S BUILDERS (BID ID -3342982)

M/S SUSHEEL KUMAR Govt. CONTRACTOR (BID ID -3343354)

M/S PARSHOTAM KUMAR GUPTA (BID ID -3343404)