Automatic Fire Detection and Alarm System

Amount

Supply, installation, testing and commissioning of UL listed, CE certified 2 wire conventional Photo electric / Ionization type Smoke detector with base made of ABS plastic with all accessories, suitable for operation on 24v DC, internal protection class: IP23, dual pulsing LED with 3600 visibility, relative humidity: ≤95%;non-condensing and EN54 compliance of approved make etc. as required.

Supply, installation, testing and commissioning of UL listed, CE certified 2 wire conventional Multi detector (fixed cum rate of rise heat Detector using a thermistor, raises an alarm when the detector reaches 590C (Fixed) or when the change in temperature exceeds the rate of rise of 110C/min) with base made of ABS plastic and all accessories, suitable for operation on 24 v DC, internal protection class: IP23, dual pulsing LED with 3600 visibility, relative humidity: ≤95%;non-condensing and EN54 compliance of approved make etc. as required.

SITC of dual LED response indicators made of ABS plastic, wall/ceiling mounted, operating voltage 24V DC, 5mm LED lamp glow light colour red compatible with all detectors etc. as required. (Make- Apollo / Honeywell / GST/ system sensor/ Ravel /Agni)

SITC of manual push button station (pill box) made of 16/20 SWG MS CRCA sheet, powder coated, signal red colour with 2mm thick break glass area not less than 30sq.cm, diffuse type LED, nickel plated brass hammer with SS chain, facility for cable entry from top, sign writing "In case of Fire Break Glass" suitable for operation on 24V DC supply etc. as required. (Make- Apollo / Honeywell / GST/ system sensor/ Ravel /Agni)

Supply, installation, testing and commissioning of electronic hooter cum speaker made of 16/18SWG CRCA sheet duly powder coated with PO red colour, output not less than 80db @25mtr, LMT with adjustable sound output of 2.5 watt,5 watt, suitable knock out for cable entry from top suitable for operation on 100/70 volt RMS AC supply etc. as required. (Make- Apollo / Honeywell / GST/ system sensor/ Ravel /Agni)

Supply, installation testing and commissioning of following Zones UL listed Microprocessor based Fire Alarm Control Panel Made of 16/18 SWG CRCA sheet powder coated, finish suitable for operation with 220V 50HZ AC mains power supply with standby battery backup 24Volt DC power supply and built in charger (without batteries) , normal operating voltage 24 v DC, compatible with all types of conventional detectors, manual call points and normally opened dry contact devices, 16X2 Dot matrix display, fully compatible with UL-864 and NFPA-72 etc. complete as required as per details specifications.

SITC of 2nos 12V sealed maintenance free battery of not less than 7AH capacity with all accessories etc as reqd.(Excide /Amco/Superior)

Supplying and fixing of 600x450mm laminated floor plan mounted on the hard board showing area covered by each zone along with each control panel etc as reqd.

P/F fire exit sign board on ceiling/wall with suitable bracket of angle iron/flat as required made of 20 gauge MS sheet and almunium frame of nominal size of 400x200x150mm illumination by miniature fluorescent tube operated on DC emergency supply, exit sign board shall be painted in red on 2mm thick acrylic sheet.

Supplying & Fixing of wall mounted photo luminescent signage’s non-toxic, non-radioactive maintenance free self glowing safety signage’s comprising of supplied chargeable crystals to glow in the dark with high intensity luminous 1.2 mm aluminum sheet properties by chemical coated (Vinyl & Tap not accepted) and covered with UV protection layer printed in multi language ad graphic symbol as per requirement etc as required. (Make Glo-line).

S/F ABS round box / MS Box on ceiling for fixing the detectors etc as reqd.

Supply and laying of 2 core 1.5sqmm FRLS PVC insulated and PVC sheathed copper conductor armoured cable on surface/recess for looping the fire alarm devices & providing power supply to sounder cum strobes etc. as required. (ISI)

Supplying and making indoor end termination with brass compression gland and aluminium lugs for following size of PVC insulated and sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required. a) 2 core, 6 Sq. mm (19mm)

Supplying and drawing of following sizes FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel conduit as required (ISI). a) 2X1.5sqmm

Supplying and fixing of following sizes UPVC single compartment trunking/mini trunking on surface of wall/ceiling along with all accessories i.e. external angles, couplers, cable retainers etc. for drawing of wire/cable of fire detection and alarm system etc. as required.(Make: MK/Legrand/Schnieder)

100mmX50mm

50mmX50mm

32mmX12.5mm

Supplying and fixing of following sizes medium class UPVC pipes on surface of wall/ceiling with all accessories and GI saddles etc. for drawing of wire/cable of fire detection and alarm system etc. as required. (Make: Precision/Universal/supreme/kinjal/ISI)

20mm dia

25mm dia

S/f of CO2 type fire extinguisher of 4.5 Kg. capacity confirming to IS 2878/86 made from ISI marked seamless cylinder confirming to IS 7285 duly approved by the chief controller of explosive fitted with ISI marked controlled valve confirming to IS3224 with high pressure 1 meter discharge hose & horn complete with initial charging complete with handle, wall mounting bracket and fixing the same on suitable clamps etc. as required. (Make: Ceasefire/Safex /superior)

FIRESTOP SALES AND SERVICES