WBPWD/SEWEC /AED /NIQ-131/2023-24 2nd Call

Amount

Supply,Installation ,Testing & Commissioning of 4way VRV/VRF Ceiling suspended Compact Cassete Units complete with all accessories suspended from ceiling comprising with 4nos.6mm dia GI threaded down rod supports fixed with L type heavy duty GI clamp whose one side fixed on ceiling GI fastener bolt of each down rod and other site connected with indoor unit of suitable size of double nuts and double washers etc as required as per the following Capacity complete with drain pump and cordless remote etc. as required as per following capacity (As per OEM standard and should be compatible with Hitachi make ODU model No RAS24HNBCMQ1 and as per direction of EIC) 4 way Cassete type IDU with Minimum. a)5HP,Nominal Cooling Capacity:-14KW,Nominal Heating Capacity:16KW,,Refrigerant R-410A, Airflow(Hi2/Hi/Me/ Lo) -1306/1165/918/741 ,Motor Output-127W (Make-Mitsubishi / Blue Star / Toshiba /Hitachi / Carrier/ Voltas / Daikin) (For 1st Floor meeting hall)

b) 3HP,Nominal Cooling Capacity:-8KW,Nominal Heating Capacity:9KW,,Refrigerant R-410A,Airflow(Hi2/Hi/Me/Lo)-953/812/635/494,Motor Output-57W (Make-Mitsubishi / Blue Star / Toshiba /Hitachi / Carrier/ Voltas / Daikin) (04 Nos for 2nd floor meeting hall and 03 Nos for DM Chamber)

c)2HP,Nominal Cooling Capacity:-5.6KW,Nominal Heating Capacity:6.3KW,,Refrigerant R-410A Airflow(Hi2/Hi/Me/ Lo)-777/600/494/388 ,Motor Output-57W (Make-Mitsubishi / Blue Star / Toshiba /Hitachi / Carrier/ Voltas / Daikin) ( For 03 Nos ADM's Chamber)

Supply and fixing of AI powder coated continuous linear bar Grill (Make- Premier, Dynacraft/ EIC approved.) with necy. Screws,washer etc as required.[For 114nos. IDU]

Supply & fixing of fire retardant nonporous double layer flexible connection between HAT duct to False ceiling as per direction of E.I.C.

Providing and fixing Aluminium frame work with(25mm x 25mmx2mm thick) Aluminium angle and (38.5mmx25mm x2mm thick) Aluminium hollow bar duly fixed in wall and suitable for fixing composite panel false ceiling with necessary screw, clips etc as par direction of EIC incl providing and fixing exterior quality Aluminium Composite panel wall cladding on existing AL frame work with GI brackets, ACP fixed on the existing frame work by floding the edges of ACP panel (engraving the rear surface of ACP sheet wall matching color) with CP angle, cleats and stainless steel screw forming grooves at the periphery of AC panel, such grooves filler with foam and silicon sealent etc complete with all material (but included the cost of silicon sealent), labour, scafolding and other incidental charges incl. cutting ACP panel recessed LED fittings if required as par direction and specification of EIC (a) 3mm thick(0.25mm AL.+2.5mm LDPE + 0.25 AL PVDF Coating)

Charges for making Trap Door made of Aluminium Channel& Plywood/ board of approved make 16mm thick for IDU Maintenance provision in future.

JOHNSON CONTROLS HITACHI AIR CONDITIONING INDIA LTD.

IDEAL INCORPORATE SOLUTION