Development of Patlara Pond,Patlara,Moti Daman

Providing and fixing galvanized chain link jalli of height 1500 mm using 8 Gauge with 50x50mm Spacing size, all welded with M.S. Angle ISA 40x40x6mm and welded on 50mm dia G.I. pipe as verticle post "B" class Asian make, all welded in proper line & level fixed and fixed in soil in cement concrete ( 1:2:4) of size 300mm x 300mm x 600mm and painting whole structure with 2 coats of enamel paint over 1 coat of primer, rate include of all labour work and material charge Including all fixtures completed as directed by engineer incharge.

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete.

Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials(A) By manual means in area of light jungle.

Earthwork in cuting in all sorts of soil and soft murrum including conveying and spreading the stuff, embankment as and where directed within 200 meters from the end of the cutting with all required lead and lift.

Earthwork for embankment including breaking clods, dressing with all lead and lift (excluding watering and consolidation)(E) From Borrow area within 3.0 Km. lead.

Providing and laying controlled cement concrete M.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (slabs,landing,shelves, Balconies Lintels, Beams, Girders and Cantilever upto floor two level.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth

Providing Thermo Mechanically Treated bar (T.M.T.) Fe-500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level. including providing fusion bonded epoxy coating not less than 175 micron thickness and upt o 300 micron to reinforcement bars as per IS-13620-1993/ASTM-775 M including testing of coating at plant and all taxes. (A) 10 mm to 16 mm dia bar.

Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete.