Renovation of Garden light and decorative light with electrical wiring of kitchen side of Guest house, Kathara Area

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (Group “C”)

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (2 X 1.5 sq.mm + 1 X 1.5 sq.mm earth wire )

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. (2 X 2.5 sq.mm + 1 X 2.5 sq.mm earth wire )

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (single pole and neutral)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)( 2+ 4 way/6 way double door)

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amp switch

5/6 amps socket outlet

15/16 amps switch

15/16 amps socket

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required

Supplying and laying 25 mm X 6mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) Details of cost for 30 metres

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of1.1KV grade following size direct in ground including excavation and refilling the trench etc. as required(212+44)=256mtr

Providing of Circular LED surface ceiling light ( round )10 watt x220v

Providing of LED surface ceiling light size- 2’ X 2’ (square)

Providing of LED surface ceiling light size – 1’ X 1’(square)x 15 watt ,220volt

Providing of ICTP switch 63 Amp 415 v

Providing of Garden light fitting 10watt

Providing of Junction box

Providing of Cable clip (for 6 sq.mm cable)

Timer switch ( auto cell) 65 amps ( for street light control)

Providing of three core PVC copper cable size 6 sq.mm (armoured)1.1kv grade

Providing of Twin core PVC copper wire size 1.5 sq.mm ( for light connection) 14x2 =28mtr

Labour/fitting/fixing charges

Total impact of GST for the purpose of CTC

AASHISH ENTERPRISES

M/S P. L. CONSTRUCTION

M/S YOGENDRA KUMAR RAWANI