Item Rate Contract for Electrical work inside Factory and DSC line at OFC, Kanpur.

Amount

Dismantling of steel poles/struts, any size and transporting to store & stacking.

M & L for Steel tubular swaged poles with cast iron base plate, finial taper complete plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 meters long)

Dismantling insulators any type, any size

Dismantling cross-arms of M.S. channel or angle sections etc. complete and setting aside for re-use with in 50m.

M&L Cross arms, bracings, supports, clamp and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint

M & L Pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two one galvanised iron nut, 50mm galvanised iron washers and height, 65mm dia for 550 volts grade.

M & L Shackle Type, Porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers, insulator including galvanised mild steel straps, washers, nsulator bolts, washers and nuts, as under: Working pressure in volts-550, 50 mm height, max dia in mm-65, section of sraps in mm- 25 X 1.59mm, dia of bolt in mm-9.

Dismantling earth wire or copper conductor, service feeder or distributor span .

Dismantling of ACSR or AAC conductors.

M & L Aluminium conductor, steel reinforced.

Fixing only Aluminium conductor, steel reinforced.

M & L for Galvanised steel wire 3.15 or 4mm dia.

Supplying and fixing 1100, volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular Size of aluminium conductor in mm2 (sq mm)-10.

M & L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire by using galvanised iron 25 x 4 mm strip as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion .

M & L Earthing complete with earth copper plate electrode 60×60cm.× 3.15mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to earthlead 20x3 mm copper strip by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

M & L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 25x4mm galvanised iron strip.

M & L Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 20 x 3 mm copper strip.

Fixing only exhaust fan at normal height (Material will be supplied by factory) and connecting up including provision of cable from ceiling rose/connector to fan.

M & L stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd. and directed.

M & L sheet metal enclosures with socket plug top and MCBs single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 20 Amp, 240 Volts.

Fixing only LED street light fitting and highbay light fitting of 35 - 120 watt, 230 volt AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver ,lamp bracket with impact and corrossion resistant including thermal management in multiple optics complete with IP65/66 protection complete for mounting on 40mm or 50mm dia. G.I. mast or bracket arms with pole fixing attachments and fixing of lamp.

Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceilingroses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custodyor for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M & L one 3 Pin socket outlet, 5Amp on the same board with other switches, with copper conductor cable size 1.5 Sq. mm. in PVC conduit.

M & L one 3 pin socket outlet, 5Amp independent with copper conductor cable of 1.5 Sqmm size in PVC conduit.

M & L One light point or one fan point controlled by one switch with cables 1.5 sq.mm size with copper conductor cables in PVC conduit.

M & L for one 3 pin socket outlet, 15 Amps, independent with stranded copper conductor cables 4 sq. mm size in PVC conduit.

M & L PVC rectangular box for mounting switch sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 x 100 x 50 mm deep.

M & L PVC rectangular box for mounting switch sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 200 x 150 x 50 mm deep.

S & F switch piano flush type single pole one way 5 amp.

S & F switch piano flush type single pole one way 15 amp.

S & F socket outlet 5 Amps, 5 Pin flush type.

S & F socket outlet 2 in 1, 5 /15 Amps 6-pin flush type.

M & L Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body.

M & L Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings.

M & L Stay assembly complete with accessories as shown in electrical plate No. 1 (loop type insulator, stay clamps, excavation and concrete measured separately) for 16mm dia of stay rod.

Loop type insulator, vitreous porcelain, white, brown or green: Small size, with overall dimensions 65 x 90mm, clearance of hole 16mm.

Galvanised stay strand, 7/ 3.15 mm

M & L Danger notice plate of 1.6 mm thick mild steel sheet ,vitreous enammeled white, with letteres, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size , for LT ,20 X 15cm size.

M & L Danger notice plate of 1.6 mm thick mild steel sheet, vitreous enammeled white, with letteres, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for HT, 25 X 20 cm size.

Fixing only Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint .

M & L Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing materialand accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm.

M & L Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination heat shrink type joint complete with jointing materialand accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 240 sqmm to 300 sqmm

M & L Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 sqmm to 185 sqmm .

M & L Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 240 sqmm to 400 sqmm.

S & F wiring for circuit/submain wiring in suitable PVC conduit along with earth wire with 2X1.5 sq. mm. + 1 X 1.0 sq. mm size of FR PVC insulated copper conductor, single core cable in surface/recessed.

S & F wiring for circuit/ submain wiring in suitable PVC conduit along with earth wire with 2X2.5 sq. mm. + 1 X 1.5 sq. mm size of FR PVC insulated copper conductor, single core cable in surface / recessed.

S & F wiring for circuit/ submain wiring in suitable PVC conduit along with earth wire with 2 X 4.0 sq. mm. + 1 X 2.5 sq. mm size of FR PVC insulated copper conductor, single core cable in surface / recessed.

S & F Rigid non-metallic PVC conduit, MMS grade, 20 mm dia. exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock, nuts, saddles, pipe, hooks, etc.

Fixing only LED tube light fitting (16-22 watt) / LED luminaire size (600 X 600) MM / LED light fitting mirror, size 2 feet / Recessed type round shape LED lamp suitable for roof ceiling/ LED light fitting bulkhead luminaires, suitable for 220 volt, AC with driver, holder including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete .

M & L sheet metal enclosure for DB,double door with 200 Amp rated busbar when MCBs to be used for single pole & neutral 4 way, 240 volts, AC.

M & L sheet metal enclosure for DB, double door with 200 Amp rated busbar when MCBs to be used for single pole & neutral 8 way, 240 volts, AC.

M & L sheet metal enclosure for DB, double door with 200 Amp rated busbar when MCBs to be used for single pole & neutral 12 way, 240 volts, AC.

M & L sheet metal enclosure for DB, double door with 200 Amp rated busbar when MCBs to be used for triple pole & neutral 8 way, 240 volts, AC.

M & L sheet metal enclosure for DB, double door with 200 Amp rated busbar when MCBs to be used for triple pole & neutral 4 way, 240 volts, AC.

Supply and fixing 6 amps to 32 amps rating, 240 volt, 10 KA ,"C" Curve miniature circuit breaker single pole .

Supply and fixing 32 amps rating ,240 volt , 10 KA ,"C" Curve miniature circuit breaker single pole and neutral .

Supply and fixing 40 to 63 amps rating ,240 volt , 10 KA ,"C" Curve miniature circuit breaker single pole and neutral.

Supply and fixing 25 to 63 amps rating, 415 volt, 10 KA,"C" Curve miniature circuit breaker tripple pole.

Supply and fixing 40 to 100 amps rating , 415 volt, 10 KA,"C" Curve miniature circuit breaker tripple pole and neutral .

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

Excavation in trenches in hard /dense soil n. exc. 1.5 m in width and n. exc. 1.5 m in depth and getting out.

Returning filling including spreading leveling watering and well ramming in layers n. exc. 25cm.

M & L sand filling in trenches including with conosolidation for cushioning of cable in layers not exc. 25cm thick

Supply and laid dry old size bricks, with sub class B bricks straight or curved on plane with with mean radius n. exc. 6m.

M/L preparation of old or previously untreated surface of any description over 10 cm in width or girth not otherwise described including rubbing , cleaning and priming with red oxide of steel tubular snack pole and as directed by EIC.

M/L for Aluminium paint (double coat) for steel tubular pole on surgaces of any description over 10 cm. in width or girth, not otherwise described as directed by EIC. Make- Asian / Shalimar / Berger / ICI paints / Nerolac / Johnson & Nicolson Paints Ltd.

M/L for writing letter or figure upto 3cm height (Block Roman, Italic, or Indian) n.exc. 30 cm heigh. Make- Asian / Shalimar / Berger / ICI paints / Nerolac / Johnson & Nicolson Paints Ltd.

M/L for writing/Painting stops, commas, short lines, dashes, hyphens, brackets, etc. Make- Asian/Shalimar / Berger / ICI paints / Nerolac / Johnson & Nicolson Paints Ltd.

M & L for Cement concrete in foundation filling and mass concrete type C2 1:3:6 (40 mm graded aggregate)

Demolition concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced)

Supply and laying GI pipe medium grade of 20 mm bore dia (Make:- Jindal/Tata/Bhusan.)

Supply and laying GI pipe medium grade of 40 mm bore dia (Make:- Jindal/Tata/Bhusan.)

Supply and laying GI pipe medium grade of 100 mm bore dia (Make:- Jindal/Tata/Bhusan.)

Supply and fixing 8 way surface/recess mounting, Double door, vertical type,415 volt, TPN MCB distribution board ,of sheet steel, dust protected, duly powder painted, inclusive of 160 amp. tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, with provision of 100 amp STP 36 KA MCCB as incommer, interconnection between incommer MCCB and busbars (but without MCBs and CCBs) as required. Make: Legrand, Hager, Siemens, Schnider.

Supply and fixing MCCB 3 POLE, 415VOLT, Adjustable type, thermal magnetic release 100 amp with breaking capacity 25 KA. Make: Legrand, Hager, Siemens, Schnider

M & L to find out electrical fault in underground HT/LT Cable of any size /type with the help of cable fault .

M & L Changeover switch 4 pole, 50 Hz, 415 volt, 400 amp rotary switch type having 2 incoming terminals and one outgoing terminal suitable to connect 02 nos. of 185 Sq.mm. cable on each terminal in sheet metal enclosure of suitable thickness with openable front door and three position rotary handle to be operated from outside. Separator on each terminal. Front door should be done on neutral position only.

M & L Metal sheet enclosure of suitable size with 320 Amp. MCCB having extendable busbar suitable to connect 01 no. of 300 Sq.mm cable with front door openable type having locking arrangement on stand.

Supplying and erection of 33 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required.

M & L PG clamp suitable for 240 Sq.mm Panther conductor

M/L boring under the road in soft dense soil to pass the underground cable for electrical connection with bore dia. not exec. 100mm.

Laying only cable in trench (with removing of trench plate/without removing of trench plate) for size of cable 35 sq.mm. to 150 sq.mm.

Laying only cable in trench for size of cable 185 sq.mm. to 300 sq.mm.

M & L for dressing of disturbed wiring , any kind of power and communication wires with suitable size of casing caping/cablofil wire mesh/DLP trunking system/PVC raceways whichever is applicable.

Laying of Telephone cable of size 10 to 50 pairs at Factory and residential area.

Supply and fixing of Telephone Cable termination module (02/10) (Make- KRONE, BEETAL) in the existing Telephone DBs at Factory and residential area.

S & F fixing of board cover/Hylem sheet (ISI marked) of size 10" X 8" by using of 2 to 4 machine screw as required including necessary fixing of switches, sockets, regulators etc and their connection.

S & F fixing of board cover/Hylem sheet (ISI marked) of size 5" X 5" / 4" X 4" by using of 2 to 4 machine screw as required including necessary cutting of sheet for fixing of switches, sockets, regulators etc.

Cutting of hylem sheet for 1 module to fix Piano socket 5A/ Piano switch 5A/ Regulator including all disconnection and connection as directed.

Cutting of hylem sheet for 2 module to fix Piano socket 15A / Piano switch 15A including all disconnection and connection as directed.

M & L Numbering of ceiling fan/exhaust fan/ fluorescent fittings as required.

Dismantling of ceiling fan and painting the same with with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, reinstalling the same as required.

m/s sagar electricals