REP REPLACE AND MAINT TO INT WIRING FLAME PROOF WIRING INCL REPAIRS TO CEILING EXHAUST AC FAN CEILING LIGHTS MISC REPAIRS OF LIGHTNING CONDUCTORS ITS RELATED WORKS INCL CERTAIN REP TO FIRE ALARM SYSTEM CQA EE ME FFE DI CELL UNDER GE MH AND RH KHADKI

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking into credit (credit for above items shall be made as per condition laid down under schedule of credit seprately) and making good disturbed surfaces of walls, floors etc complete all as specified.

M&L for point wiring using approved colour coding as per IS (red, black and green for single phase circuits), with multi stranded copper conductor 1.5 Sqmm nominal cross sectional area,single core, PVC insulated and unsheathed FRLS cable1100 volts grade , ISI-694 (1990) marked with valid CML No in and including medium grade,PVC casing & capping of suitable size on walls/roof/floor etc, ISI marked with suitable accessories, mild steel/ pressed steel sunken box of 1.2 mm thick and 60 mm deep (with earth dolly) duly painted with two coat of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide externally, covered with 3 mm thick plasticlaminated sheet cover for fixing of switches, sockets and fan regulator etc, including PVC insulated multistranded copper conductor 1.5 SQ mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed by Engr- in-charge for the following :-

One fan/light /bell point controlled by one switch/bell push

One switch socket outlet 5 Amps on independent board

One socket outlet 5 Amps on the same board

All as per Item No 2 here-in-before but with 2.5 Sqmm PVC insulated multistranded copper conductor cable including 2.5 sqmm PVC insulated but unsheathed copper conductor FRLS cable 1100Volts grade and 2.5 sqmm as earth continuity conductor for one switch socket outlet 15 Amps on independent board complete all as specified and directed by Engr- in - Charge.

All as per Item No 2 here-in-before but with 4.0 Sqmm PVC insulated multistranded copper conductor cable including 4.0 sqmm PVC insulated but unsheathed copper conductor FRLS cable 1100Volts grade and 4 sqmm as earth continuity conductor for power socket on independent board complete all as specified and directed by Engr- in - Charge.

M&L for sub main wiring but using two single core multistranded PVC insulated copper conductor FRLS Cable of size 4 sqmm 1100 volt grade drawn into PVC Cassing capping of suitable size including 4.0 sqmm. PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surface including taking down old unserviceable/burnt wiring of any type or size all as directed by Engr-in-Charge. Note: Two single core cable, earth wire and PVC conduit shall be measured as one length.

All as per item No 05 above but of 6 Sqmm .

Supply and fix in repair ceiling rose surface bakelite with three terminals type in complete all as specified and directed.

Supply and fix in repairs switch piano type one way 6 Amps flush type, 240volt AC complete all as specified and directed.

Supply and fix in repairs socket outlet 2 in1,3 pin 5 Amps complete all as specified and directed.

Supply and fix in repairs switch socket combination(SSC) 2 in 1, 3 pin, 5 Amps flush type, 240volt AC complete all as specified and directed.

Supply and fix in repairs switch piano type 16 Amps flush type ,240volt AC complete all as specified and directed.

Supply and fix in repairs socket outlet 2 in 1, 3/ 5 pin 16 Amps flush type complete all as specified and directed.

Supply and fix in repairs switch socket combination(SSC) 2 in 1, 3/5 pin, 16 Amps flush type ,240volt AC complete all as specified and directed.

Supply and fix in repairs Bell push, flush type, 6 Amp flush type, 240volt AC complete all as specified and directed.

Supply and fix in repairs switch piano type two way 6 Amps flush type ,240volt AC complete all as specified and directed.

Supply and fix in repairs Bell push, Modular type, 6 Amp flush type, 240volt AC complete all as specified and directed.

Supply and fix in repair modular switch 1 way 6A 1 module complete all as specified and directed.

Supply and fix in repair modular switch 2 way 6A 1 module complete all as specified and directed.

Supply and fix in repair modular socket 6A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix in repair modular socket 6A /16A 2/3 pin combined 2 module complete all as specified and directed.

Supply and fix in repair modular fan regulator,120 watt - 2 module complete all as specified and directed.

S & Fix in repair stepped type electronic fan regulator 120 watt ,240 olt flush type on the existing phenolic laminated sheet

Supply and fix in repair electric bell Ding Dong, AC 230 volts complete all as specified and directed.

Supply and fix in repair Modular white cover plate with frame of following size complete all as specified and directed :-

1 module

2 module

3 module

4 module

6 module

8 module

Supply and fixing replacement of RCCB 63 A, four pole, 30 mA complete all as specified and directed by Engr-in-chrge. Make: Hager/L & T/Standard

Supply and fix in industrial wall mounted plug socket suitable fotr IP 44 degree of protection of 32Amps rating 2P+E complete all as specified and directed.

S & F sheet metal enclosures for double door distribution board factory made duly painted of following capacity with 200 amps rated bus bar, suitable for fixing MCB /Isolators all as specified :- Make : L & T/legrand/Havells or equivalent.

12 way SPN, 240V

8 way SPN 240V

4 way TPN, 415V

6 way TPN ,415V

S & F MCCB 125 Amps, 4 pole, Breaking capacity 16 KA, 415 V adjustable type all as specified of capacity. Make: L &T /Legrand/Indoasian/standard.

All as per item No 28 Above but of capacity 100 Amps.

Supply and fixing miniature circuit breaker (MCB) of following current carrying capacity, in the MCB DB complete with connection testing and commissioning. Make : L &T /Legrand/Havells

SP 5/6 to 32 AMP,240V, 10 KA 'B' curve

SP 40 AMP,240V, 10 KA 'B' curve

SPN 32 Amps,240V, 10 KA 'B' curve

SPN 40 Amps ,240V, 10 KA 'B' curve

TPN 63Amps,240V, 10 KA 'B' curve

Taking down old unserviceable fitting and S & F wall mounted extruded aluminium housing high quality indoor batten of 20/22 watts capacity colour temperature 6500 K (4' long), lumen 2000 -3000, PF> 0.9, THD less 15% diffused connecting with three core flexible copper wire from connector to ceiling rose/angle holder as per existing site requirement as directed by Engr-in-charge. Make : Havells/wipro/Halonix or eqivalent

All as per item No 31 but LED tubelight fitting of 10 watt, 2 feet long

Taking down old unserviceable lamp holder and S & F lamp holder, PVC/ polycarbonate type with back plate suitable for batten fittings complete all as specified and directed

Taking down old unserviceable fitting and S & F Recess/Surface mounting LED flat panel light fitting of wattage 36 watts, size 600mmx600mm and with efficient LEDs lumen 2000 -3000, PF> 0.9, THD less 15% including taking down unserviceable fitting of any type and make complete all as specified and directed. Make : Havells/wipro/Halonix

Taking down old unserviceable Bldg security light S&F fix high efficent LEDbuilding security light 30 watt, 230 V, lumen 2000 -3000, PF> 0.9, THD less 10%, made of pressutre cast aluminuim housing with high power LEDs, lens and touughned glass IP 66 connecting with three core flexible copper wire from connecto to ceiling rose. Make Halonix ,Bajaj,Havells or equivalent.

S & F in repair bracket for mounting building security light made out of 40 mm dia Light Grade GI pipe bend in angle with holding MS clamps two nos each bracket of size 25x3 mm including screw etc for fixing all as specidfied and directed by Engr- in-charge

Dismantling old Air circulator fan of any type and depositing it to MES store and Supply & fixing heavy duty Air Circulator fan pedestal type of size 600mm, single phase , 250 volts, 1400 rpm, power input 200 watts complete all as specified and directed. Make :- Bajaj/Crompton/Polycab

Dismantling old Air circulator / Wall fan of any type from any height and depositing it to MES store and Supply & fixing Flame proof Air circulater/Wall fan of size 18 inch, 0.25 HP, single phase , 250 volts complete all as specified and directed. Make :- Shyaam (cat no-SSPL/MT/140) / Sudhir or equivalent.

Dismantling old Exhaust fans of any type from any height and depositing it to MES store and Supply & fixing Flame proof Exhaust fan of size 18'', 0.25 HP, single phase, 250 volts including louvers of suitable size complete all as specified an directed . Make :- Shyaam (cat no-SSPL/MT/140) / Sudhir or equivalent.

M & L for rewinding of Ceiling Fan, Exhaust Fan and Air circulator of any type/make by split opening the fan carrying cutting the burnt winding and cleaning the slots and rewinding with super enamelled copper winding wire appropriate gauge including connection,capacitor base and testing complete all as specified and directed by Engr-in-Charge. Note: Bearing ,fan canopy, capacitor, down rod etc will be measured and paid separately under relevant item of schedule.

Ceiling fan of 1200/1400 mm sweep

Exhaust Fan of sweep 275-300 mm

Exhaust Fan of sweep 350-450 mm

Supply only ball bearing (DE/NDE) to match the existing make suitable for 1200/1400 mm sweep ceiling fan including greasing complete all as specified and directed by Engr-in-Charge. Make: SKF/NBC

Supply only ball bearing suitable for 275-450 mm exhaust fan complete all as specified and directed Make : SKF/NBC or equivalent

Supply only fan capacitor of following capacity :-

Capacitor 2.5 mfd

Capacitor 4 mfd

Supply only, rubber yoke, MS Clamps, bolts nuts with split pin suitable for ceiling fan 1200 /1400 mm sweep complete all as specified and as directed by Engr-in-charge.

Supply only gunmetal bush suitable size for ceiling fan 1200 /1400 mm sweep complete all as specifed and directed by Engr-in-Charge.

Supply only fan down rod of following length with white enamelled painted with both side hole for hanging fan of sweep 1200/1400mm sweep all as specified and directed by Engr- in-charge

1 ft long

2 ft long

Supply only fan canopy set off white /white coloured as per colour of ceiling fan of sweep1200/1400mm complete all as specified and directed.

Supply only stator for ceiling fan of 1200/1400 mm sweep with silicon coating, anti rust coating, size and slot as per sample, feasible to fix in exisiting rotor size complete all as specified and directed

Supply only rotor for ceiling fan of 1200/1400 mm sweep with silicon coating, anti rust coating, size and slot as per sample, feasible to fix in exisiting stator size complete all as specified and directed

M & L for replacement of PVC polycarbonate rectangular block for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of following size make cutting for fixing existing switches, sockets, regulators and make necessary connection and testing complete all as specified and directed by Engr-in-Charge.

100 x 100 mm and 50 mm deep

200 x 150 x 50 mm deep

250 x 200 x 50 mm deep

M&L for point wiring flame proof in stove enamelled ERW steel conduit 20 mm dia medium grade on surface with ISI marked two runs of PVC insulated unsheathed multistranded copper conductor cable (FRHR) 1.5 sqmm nominal cross sectional area, 1100 volts grade and including one run of 1.5 sqmm (green colour) ISI marked PVC insulated unsheathed multistranded (FRHR) copper conductor cable as earth wire with all flame proof fittings such as elbow, bends, junction boxes, ceiling rose saddles , flexible metal conduits etc. including suitable size of sheet metal box 1.6mm thick (ISI Mark), screws and rawal plug etc. and connected to light/fan and common earth dolly with necessary copper thimbels complete all as specified and directed by the Engr-in-charge for the following :-

One light/fan point controlled by one, one way flame proof switch.

All as per item No 49 here-in-before but for socket out let, 15/16 Amps. independent with 2.5 Sqmm size cable and 2.5 Sqmm for continuity earth wire connected to common earth dolly complete all as specified and directed by Engr - in - charge.

S&F fluorescent tube light fitting 1x16W flameproof type FLP-WP made of aluminium alloy LM6, along with LED tube rod of suitable type of capacity 16/20 watt complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specifiede and directed. Make, Cat No. - EXTL140 Crompton Greaves/Shyaam/Sudheer.

S&F in replacement FLP-WP LED flood light fittings of capacity 120 watts made of aluminium alloy LM6, complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engr-in-charge. Make-Shyaam, Cat No. - SSPL/1251 or Sudhir or equivalent.

M & L for rewinding of flame proof ceiling fan of 1200/1400 mm sweep of any make by split opening the fan carrying cutting the burnt winding and cleaning the slots and rewinding with super enamelled copper winding wire appropriate gauge including connection,capacitor base and testing complete all as specified and directed by Engr-in-Charge. Note: Bearing ,fan canopy, capacitor, down rod etc will be measured and paid separately under relevant item of schedule.

All as per item No 53 above but Exhaust Fan of sweep 300-450 mm

S&F FLP - WP switch socket and plug combined in LM6 aluminium alloy 16 A 2P + Earth complete all as specified. Make-Sudhir/Shyaam or equivalent.

S&F FLP - WP switch flame proof rotary ON-OFF type with termination box in LM6 aluminium alloy, 10/16A, single pole 250V Make-Shyaam, Cat No. - SSPL/2C/1010. or Sudhir or equivalent.

Flame proof, weather proof 12 way SPN MCB DB 240 V. 50 Hz in LM 6 construction, consisting of 01 No. incoming MCB SPN- 63 Amps(01 Nos), MCB SP – 6 to 32 Amps (10 Nos), 10KA Breaking capacity as outgoing with clip on type terminals with suitable cable entries certified by CMRI Dhanbad. Make :- Shyaam Cat Part NO-SSPL/MCDB/186 or Sudhir or equivalent.

S&F in replacement of Flame proof , weather proof 8 way SPN MCB DB 240 volts in LM 6 construction consisting of 01 nos of incomer MCB SPN -40/32 amps (01) Nos MCB SP -06 -32 Amps 06 nos 10 KA breaking capacity as outgoing all as specified. Make :- Shyaam Cat Part NO-SSPL/MCDB/186 or Sudhir or equivalent.

S&F in replacement for submain wiring alongwith earth wire with FRHR PVC insulated copper conductor, multistranded, on surface of size 2 x 6.0 Sqmm & 1 x 6 Sqmm earth wire in ERW steel conduit all as directed by Engr-in-Charge. Note: Two run of FRHR PVC insulated copper cable, earth wire and Steel conduit shall be measured as one length.

Servicing and maintenance of Micro Processer based fire alarm control panel of any make installed at main bldg of CQA (EE) comprising of various loops data card, battery, LCD/LED display panel, buzzers, response indicators, heat and smoke detectors etc, including testing by OEM complete all as specified and as directed. Notes :- (i) The Rates are inclusive of regular inspection of authorised OEM, once in a month. (ii) The maint and servicing includes clearing the fault in loop wiring, cleaning the heat/smoke detectors with blowers, response indicator, MCP, Sounder cum Strobe with control module etc all as directed by Engineer In Charge. (iii) Major Spares required for maintenance of the above panel shall be measured and paid separately under relevant item.

Supply only addressable smoke detector complete including dismantling the old unserviceable SD complete all as specified and directed.

Supply only addressable manual Call point including dismantling the old unserviceable call points complete all as specified and directed.

Supply only addressable sounder complete including dismantling the old unserviceable sounders complete all as specified and directed.

Supply only 12 volt 7 AH/10AH battery complete including dismantling the old batteries all as specified and directed.

Supply, draw, connecting, testing and commissioning of 2 core 1.5 sq mm stranded copper conductor, PVC insulated PVC sheathed FRLS, flexible armoured cable laid on ceiling/wall clamped with aluminium clamps/ drawn in ERW pipe complete all as specified and directed . Note :- (i) The cables are to be drawn through the false ceilings, laid in floors, fixed to walls as per the site requirements. (ii) The conduits are to be measured and paid seperately under relevent item.

Supply and laying of Mild Steel Stove enameled black conduit alongwith the accessories such as tees, bends, elbows, bell mouth ends and all fixing accessories such as couplers, locknuts, saddles, pipe hook etc. on surface/recess including painting, in case of recessed conduit, cutting the wall and making good the same for of recessed conduit of size 25 mm dia.complete all as specified and directed.

PURVA ELECTRICALS AND ENGINEERS (BID ID -3169081)

ONKAR ELECTRIC AND GENERAL STORE (BID ID -3169509)

M/S kirpan Enterprises (BID ID -3169707)

SKS Electricals (BID ID -3169521)