Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.5 LAccepted-AOC | L1 | Accepted-AOC Being lowest tender | |
| 2 | L2₹17.3 L+₹30,704 (1.81%)Rejected-Finance | L2 | Rejected-Finance Not being lowest tender | |
| 3 | L3₹18.1 L+₹1.1 L (6.56%)Rejected-Finance ANAND BHAVAN GHASMANDI MORAR GWALIOR MP 474006 | GWALIOR | GWALIOR | MP | 474006 | L3 | Rejected-Finance Not being lowest tender | |
| 4 | L4₹21.1 L+₹4.1 L (24.2%)Rejected-Finance WARD NO 20 BIRLA HOUSE JEDERUA KALA DISTT GWALIOR M P 474006 | GWALIOR | GWALIOR | MADHYA PRADESH | 474006 | L4 | Rejected-Finance Not being lowest tender | |
| 5 | Rejected-Technical G 124 FLAT NO 4 DILSHAD COLONY DELHI 110095 | SHAHDARA | DELHI | 110095 | - | Rejected-Technical NO Remark in WLR QE MAR 2023 OF HQ CE PRAYAGRAJ |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
20 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) ADM AREA
GE (AF) ADM AREA GWALIOR-474020
WELLCOME MAINT SERVICES AND CONNECTING B/R WORK AND REPAIR / REPLACEMENT JOINARY,CUP BOARD, PLINTH PROTECTION AND CERTAIN BR WORKS FOR DEFENCE CIVILIAN MD ACCN UNDER GE(AF) ADM AREA AT AF STN GWALIOR
2023_MES_597743_1
8317/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) ADM AREA GWALIOR
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE (AF) ADM AREA
₹50,000
Yes
19 Aug 2023
23 May 2023
28 Jun 2023
23 May 2023
20 Jun 2023
6 Jun 2023
Amount
Dismantling floor hearth or wall tiling including cement mortar bedding & removing serviceable material to store and rubbish off the premises complete all as specified and directed.
M&L for non skid ceramic tiles (Coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.
All as per item No-2.00 here-in-before but on vertical surfaces including 10mm thick screed plaser in CM 1:4 , complete all as specified and as directed.
M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.
M&L for ceramic tiles (Coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.
M&L for glazed ceramic tiles 450x300 x 6-7mm thick coloured on vertical surfaces such as skirting/dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over rendering 10 mm thick in CM 1:3 on wall complete all as specified and directed.
Demolition of PCC in ground floor & pavings (including floor tile ) n.exc 15 cm thickness below or above GL, including removing excavated material n exc 2.5 KM distance and depositing where as directed, complete all as specified and directed.
M&L for 25 mm PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in floors finished rough to received tiles etc complete all as specified and directed.
M&L for 50 mm thick PCC (1:2:4), type B-1, using 20mm graded stone aggregate as in floor finish, laid in alternate bays,, surface finished even & smooth without using extra cement, with and including joint filling complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. and segregation serviceable bricks, keep them staking for re use complete all as directed.
M&L for brick work with sub class 'B' bricksm staiaght or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.
S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest and 'S' or 'P' traps(cast iron 100mm bore) (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc complete all as specified in SSR and complete all as specified and directed.
Supply and fix in repairs of PVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and incl ball valve float & handle, waste pipe & fixing accessories to wall complete all as specified and directed.
S & F in repair fancy type angle/stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed.
S & F in repair fancy type stop cock (Concealed type), 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed
S & F in repair Bib cock long body with flange, 15 mm dia, cast copper alloy, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.
S&F in repairs PVC connections 15mm size of PTMT of 600mm long. complete all as specified and directed.
Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.
Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.
S&F GI tubing 15mm bore medium grade with and including all fittings and fixed to wall, floor and ceiling etc complete all as specified and as directed.
S&F GI tubing 20mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling etc complete all as specified and as directed.
S & F in repair Gun-metal, globe or gate valve, 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed.
S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top),triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with all fittings such as dead plugs and checknuts etc. of 20 mm dia including dismantling of old PVC tank (Capacity 250- 500 Litres) & removing to where directed complete all as specified and as directed.
S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top),triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with all fittings such as dead plugs and checknuts etc. of 20 mm dia including dismantling of old PVC tank (Capacity 501- 1000 Litres) & removing to where directed complete all as specified and as directed.
S&F ball/ float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 20mm bore pipe minimum weight 210 gms complete all as specified and as directed.
S&F in repairs overhead showe ABS Round with 225mm SS Arm & flange joint chromium plated screwed down 15mm bore Make : Prayag Cat No BS-69 or equivalent in Hindware/Jaquar (ESSCO) or equivalent as approved by GE.
S&F in repair 100mm chromium plated central hole grating dom complete all as specified and directed.
S&F in repairs PTMT waste pipe 32 mm bore of length up to 80 cm for WHB / sink/unrinal pots, complete all as specified and directed.
S & F in repair Vitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed.
S&F pillar tap 15mm dia long body,chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified & directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe(overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm), complete all as specified and directed
S&F in repairs of fancy type Wall mixer with pipe bend chromium plated screwed down 15mm bore Make- Prayag Cat No 6875 or equivalent in Hindware/Plumber/Cera or equivalent as approved by GE.
S&F in repair CP soap dish with glass Finish (Glossy) Make : Prayag Cat No BA-15G or equivalent in hindware/ Cera complete all as specified and directed.
S&F in repair toubler towel rail 20mm dia D type 60 cm long between flange brass chromium plated Make : Prayag cat No BA-1S or equivalent in Hindware/jaquar complete all as specified and directed.
S&Fixed in repair of MS powder coated peg sets of 6 Nos peg set of good quality, complete all as specified and directed.
S&F in repair 1.00 mm thick stainless steel plate rack of over all size 600x900x100 mm of standard pattern complete all as specified and directed.
Demolition of Stone slabs of any description or thickness in floors / kitchen platforms etc., complete all as specified and as directed.
M&L Granite of 18mm to 20mm thick (of any type) work (table rubbed/moulding and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including over and 20mm screed bed in CM 1:4 all as specified and directed.
Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.
S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed.
S & F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints and jointed with adhesive and laid in floors/ trenches (75 mm bore)
S&F, 75 mm bore PVC (SWR) bends and fixed in position with adhesive complete all as specified and directed.
M&L in repair PVC (SWR) floor trap, 75mm dia plain with grating incl jointing with solvent cement cement etc all as specified and directed.
M&L in repair PVC (SWR) multi floor trap, 75mm dia plain with grating incl jointing with solvent cement cement etc all as specified and directed.
S&F 100 mm bore PVC (SWR) bends and fixed in position with adhesive complete all as specified and directed.
S&F 110 mm bore PVC (SWR) branch piece double Y and fixed with adhesive
S&F 110 mm bore PVC (SWR) single T and fixed with adhesive
S&F 100 mm bore PVC floor traps laid in floors and fixed in position with adhesive.
Demolition of sunken slab floor or WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab in following . (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with WP chemical of Sika/Fosroc/M/s Choksey or equivalent as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia Pipe 450mm long bottom of the sunken and wraping of bath seal tape on the pipes inserted through walls to floor are and seal it (Bath seal tape product of Sika/Fosroc/M/s Choksey or equivalent and grouting around the inserted pipes byu porable Sika/Fosroc/M/s Choksey or equivalent bath seal grout as directed. (d) Make angle fillets by mixing sand cement of Sika/Fosroc/M/s Choksey or equivalent on all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of Sika/Fosroc/M/s Choksey or equivalent bath seal WPC of thickness 1mm in combination of WPC and cement (1:1.5) by vol and giving upto height 15cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC of Sika/Fosroc/M/s Choksey or equivalent as per amnufacturer instructions in sunken slab over brick bat . (g) Fill the sanitary gaps with Sika/Fosroc/M/s Choksey or equivalent sealing compounds complete.
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash, complete, all as specified & as directed.
M&L for preparation of old surfaces (plastered or unplastered) of ceiling including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceiling, complete, all as specified & directed.
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of white wash on wall, complete, all as specified & as directed.
M & L for one coat of oil emulsion distemper on old decorated surfaces walls plastered or unplastered , including preparation of surfaces by washing, rubbing down and stopping of distempered surfaces, completed all as specified and directed.
M&L for complete removal of existing treatment from old surfaces of walls including cornices and applying 1mm thick wall care putty including suitable primer to obtain the desired/ true surface of wall complete all as specified and directed by Engineer- in-charge.
M&L for two coats oil emulsion distemper on putty prepared surfaces / old decorated surfaces of walls complete all as specified and directed.
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of cement base paint, complete, all as specified & as directed.
M&L complete removal of existing treatment including cleaning of motar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and applying two coats of cement base paint of approved shade/tint with alkali fungal & resistant primer etc complete all as specified and directed.
M&L for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.
M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete, all as specified and as directed
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of exterior emulsion wall paint complete all as specified and as directed. Note : Colour will be decided by Engr- in-Charge.
Taking down cement plaster of any description from wall/ceiling including raking out joints hacking for key, scrubbing down with water etc, complete all as specified and directed.
M & L for rendering 15 mm thick on fair faces of brick wall finished fair & smooth in CM 1:6 complete all as specified and directed.
M & L for 10mm thick rendering in cement mortar 1:4 to the surfaces of ceiling and finishing even and smooth without using extra cement complete all as specified.
M&L for renderig 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete of walls, chajja, fins, facia etc upto 3 stories height mixed with water proofing compound @200ml per 50kg of cement or as per manufacturer's instructions, finished even and smooth without using extra cement complete all as specified . Note :- 1. Supply on water proofing compound shall be measured and paid separately. 2. Cost of scafolding for rendering is included in this item. 3. Rendering will be done in two layer. Ist layer will be 10-12mm thick and 2nd layer will be 3-5 mm thick
M & L preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed.
M & L for preparation of newly plastered surface of wall and applying two coats of cement based paint over a coat of primer complete all as directed.
M & L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
M & L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening, complete all as specified and directed by Engineer-in-Charge.
Supply only water proofing compound complete all as specified and directed.
Taking down chowkat or frame with shutters area not exc 1.5 Sqm each (without taking off the shutters from the frame) including irom mongrey and cutting holes for hold fasts & making good complete all as specified & directed.
Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including iron mongery and cutting holes for hold fasts & making good complete all as specified & directed.
S&F pressed steel frame for door with one or more rebates size 125x60mm including necessary fixing lugs, lock striking plates,hinges,hold fast etc. complete size /profile of frame as per IS incl filling cement concrete type B-1 (1:3:6) filling and cpaction in frame complete, all as specified,
S&F Pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. incl filling cement concrete type B-1 (1:3:6) filling and cpaction in frame complete, all as specified,
M&L 35mm thick factory made shutter plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.
S&F, 35mm thick factory made second class hard wood, factory made, glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc divided into squares with rails and styles including cut and mitered beards for securing wire cloth etc. the size of members as specified in SSR-2009, Part I clause No 8.20 (a) and as directed.
S&F stainless steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples, all as directed.
S&F solid PVC door frame of size 50mmx47mm thick made out of 5mm thick plain colour PVC sheet reinforced with M.S Sqare tube, single side prelam PVC sheet used instead of plain colour PVC sheet edges will be painted to match with prelam sheet.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing
S&F butt hinges of size 100mm medium weight, stainless steel ISI marked complete all as specified.
S&F 150mm long aluminium anodised barrel tower bolts of extruded section all as specified.
S&F 150 mm size aluminium alloy handles, fabricated type, extruded section.
S&F 150 mm length door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc all as specified and directed.
Supply and fixing of rubber beading 40mm strip in bottom of door complete all as specified and directed.
Supply and fixing of steel door spring of size 200mm in wooden/steel frame by welding or screwing as which ever is appropriate for fixing in frame complete all as specified and directed.
S&F Aluminium anodised , sliding door bolt with hasp , staples (bolt type) and fixing clipsof sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed.
supply and fix sheet glass 4.80 mm thick ordinary quality in square n.exc 0.5 complete all as specified and directed.
S&F in repair 18mm thick solid UPVC ply of 1st quality of one side prelaminated of approved colour and one side white colour fixed with screwes, solvent cement/ adhesive to make kitchen cabinate and cup board shutters complete all as specified and directed.
S & F in repair 18mm thick PVC board of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom, shelves inside the cabinet and shutter or drawer including demolition of existing board any type or specification complete all as specified and directed.
S & F continuous (Piono) hinges ,mild steel, bright finished or electrogalvanised, width of flap 30 mm (when open), complete all as specified and directed.
S&F 125 mm size alum, Hasp and staple, safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed.
S&F in repairs Magnet catch for kitchen cabinet shutters as per approved sample complete all as specified and directed.
S&F in repair coloured powder coated 25mm dia aluminum drapery rod with natural wooden finish and wooden ornamental attachement at both ends and one set ornamental decroative finish wooden clamps complete all as specified.
S & F colour powder coated aluminium frame and shutters for door/windows/ventilators/partition with one or more rebates or aluminium section of two or more traccks incase sliding windows including jointing cleat for fixing (minimum thickness of powder coating shall be 50 micron) complete all as specified and directed.
S&F aluminium grills of size exc 5mm x 7.5mm and aperture n exc 80mm incl fixing with aluminium channel 1mm thick with steel screw and tint match with existing complete all as specifed and as directed.
M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified.
M&L for complete removal of existing painting and preparation of old surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified.
M&L for complete removal of existing painting and preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one two coats of synthetic enamel paint, complete over a coat of red oxide, all as specified and as directed
Repairing of RCC projections chajjas, roofs, facia etc by necessary preparation, scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering in cement mortar 1:3 using coarse sand in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm including applying two coats of finishes as provided to the existing surfaces to match with the existing surfaces in at any height complete all as specified and directed.
M/s Manish Contractor
M/s Anjali Construction
J.N.R. Engineers and Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .