REPAIR / MAINT OF TRANSFORMER AND ALLIED WORKS

Amount

Inspection of defective step down transformer 11 KV / 0.433, Opening up the top cover by taking out the transformer oil in a separate container after disconnecting/taking out the HT/LT side electric connections from both the primary & secondary side of the transformer of any type/ description (indoor/outdoor type ) installed on floor/pole for carrying out necessary repair/rewinding to HT/LT side or any other repair as required after shifting the transformer to contractor's work shop including taking out complete core assembly, Magger the winding for identifying the fault/defective winding, seggregating the defective winding portion/taking out, cleaning the laminated core rewinding with appropriate gauge winding wire of existing description for transformer of capacity 400 to 600 KVA including assembling & testing on completion & installation the same at the site all as specified and directed by Engr-in-charge. Note : (i) Winding of coil and spares required as per repair shall be measured and paid separately under respective items. (ii) The transpotation charges and taking down/taking up of transformer are inclusive in the quoted rates. (iii) The cost for the dehydration of transformer oil if reqd shall be measured & paid separately. (iv) The cost of insulation material such as paper, cotton tape , latheroid sheet , casl sheet etc are inclusive in the quoted rate. (v) Transformer shall be returned duly repaired within 05 days failing a penal recovery (Lump Sum) of Rs 5000/- shall be made from contractor's dues.

All as per Srl Item No 01.00 here-in-before but capacity 300 to 315 KVA.

All as per Srl Item No 01.00 here-in-before but capacity 200 to 250 KVA.

All as per Srl Item No 01.00 here-in-before but capacity 100 to 160 KVA.

All as per Srl Item No 01.00 here-in-before but capacity 50 to 100 KVA.

Supply and fixing, in replacement, HT coils made out of super enameled double paper coated (DPC) HT copper winding wire of transformers, capacity 50 to 600 KVA, coils to be repalced as per existing number of turns, gauge, insulation value matching with manufactures design complete all as specified. Make ATLAS / HTP / BIC.

Supply and replacement of LT coils made out of super enameled LT copper strip of trasformer capacity 75 to 600 KVA(Note coil to be replaced shallhave same number of turns,gauge,insulation value matching with manufactures design Make :ATLAS/HTP/BIC.

Supply and replacement HT 11 KV bush rod suitable for indoor / outdoor type 400 to 600 KVA transformer complete with brass stud, brass nuts, brass cup and packing gasket complete all as spd and directed.

All as per Srl item No 8.00 here-in-before but suitable for 300 to 315 KVA transformer.

All as per Srl item No 8.00 here-in-before but suitable for 200 to 250 KVA transformer.

All as per Srl item No 8.00 here-in-before but suitable for 125 to 160 KVA transformer.

All as per Srl item No 8.00 here-in-before but suitable for 50 to 100 KVA transformer.

Supply and replacement brass stud for LT side suitable for transformers 400 to 500 KVA complete all as specified and directed.

All as per Srl item No 13.00 here-in-before but suitable for 300 to 315 KVA transformer.

All as per Srl item No 13.00 here-in-before but suitable for 160 to 250 KVA transformer.

All as per Srl item No 13.00 here-in-before but suitable for 50 to 125 KVA transformer.

Supply and replacement temperature gauge 0-100 degree Celsius range round type complete all as specified and directed.

Rubbing/scratching old paint of transformer of capacity 400 to 600 KVA, through cleaning with kerosene oil and providing two coats of metallic paint including writing MES No on Transformer body with black paint complete all as specified and directed.

All as per Srl item No 18.00 here-in-before but suitable for 300 to 315 KVA transformer.

All as per Srl item No 18.00 here-in-before but suitable for 200 to 250 KVA transformer.

All as per Srl item No 18.00 here-in-before but suitable for 100 to 160 KVA transformer.

All as per Srl item No 18.00 here-in-before but suitable for 50 to 100 KVA transformer.

Supply and fill up transformer oil topping up having dielectric strength not less than 40 KV at 4 mm gap conforming to IS complete all as specified and directed.

Cleaning, dehydration/ reconditioning of transformer oil different location by dehydration plant including testing as per IS Specification and result not less than 40 KV at site, complete all as specified and directed by Engineer-in-Charge.

Shifting of transformer from one place to other place within the cantt area including disconnecting and reconnecting all connection any time any capacity all as directed by Engr in charge.

Supply and fixing in replacement of HT underground cable XLPE insulated PVC bedded, galvanised steel strip armoured electric power cables (heavy duty) with stranded aluminium conductor 11000 volts grade cross sectional area 185 sqmm 3 core laid in duct / trench/along pole etc including making connection complete all as specified and directed.

Taking out and transporting defective transformer pole mounted/rested on platform for repairs after disconnecting from both HT/LT network and shifting to workshop from NAMS area Sub Stn for repairs of cap 50 to 250 KVA. (Complete manpower and necessary transport/T & P shall be contractors own arrangement at no extra cost) complete all as specified and directed.

All as per Srl item No 27.00 here-in-before but suitable for 300 to 600 KVA capacity

Transporting and Re-installation only of repaired transformer of capacity 300 to 600 KVA at NAMS area including necessary connections with HT/LT net work. (complete manpower and necessary transport/T & P shall be contractors own arrangement at no extra cost complete all as specified and directed.

All as per Srl item No 29.00 here-in-before but suitable for 50 to 250 KVA capacity

Supply and fixing in replacement out door type triple pole, 11000 volts mechanically operated Air break switch, mounted on 15 Nos insulators and steel frame, with operating mechanism worked from ground level for current rating up to 200 amps and all accessories ie pipe clamp etc complete, all as specified and directed. Make - Pactil/OBLUM/ABB,Jaipuria/Rastriys/BHEL.

Supply and fixing in replacement of complete male & female contacts of gang operative switch made out of brass and rated capacity 200 amps ,make matching with the existing switch complete all as specified and directed .

Supply and fixing in replacement of 3 Nos copper ribbon suitable for 200 amps rated capacity gang operative switch, 45 CM long complete all as specified and directed .

Material and labour for painting to steel gantry towers & beams for 66 KV outdoor type switch yard complete including all accessories and equipment, support, structrure including preparation of steel surface by scraping and removing old paint, applying a coat of red oxide primer and two coats good quality of aluminium paint as per following:- (a) Approximatly 11 mtr high towers (vertical) - 18 Nos (b) Approximatly 03 Mtr high towers (vertical) - 40 Nos (c ) Approximatly 06 Mtr long (Horizontal) towers - 10 Nos (d) Stand for highly arrested 3 mtr long x 2 mtr width support- 08 Nos (e) Greasing of all contact points in 66 KV switch yard. Note:- All the painting work will be carried out in the 66KV yard after proper shut down from PSPCL with prior approval of Engr-in-Charge.

Rubbing/scratching old paint of 66KV power transformer of capacity 6/8 MVA, through cleaning with kerosene oil and providing two coats of metallic paint including writing MES No on Transformer body with black paint complete all as specified and directed. Note : All painting work shall be done with prior approval of Engineer-in-Charge.

Material & labour for painting of PCC poles with two coats of synthetic enamel paint in black and white strip 30 cm wide each up to 1.5 mtr height from coping over a coat of primer including numbering of poles complete all as specified and directed.

Carrying out 'Earthing' tests with Earth testing Equipment (to be provided by contractor) at various places like; Sub Stations, Pump Houses etc in the presence of Engr-in-charge / JE, preparing 'Results Sheet/Record' and submit to the department for maintaining record complete all as specified and directed.

Taking out transformer oil from various transformers of any capacity and testing for Di-Electric strength with Oil testing Equipment (to be provided by contractor), preparing 'Results Sheet/Record' and submit to the department for maintaining record complete all as specified and directed.

Supply and fixing in replacement of HT underground cable XLPE insulated PVC bedded, galvanised steel strip armoured electric power cables (heavy duty) with stranded aluminium conductor 11000 volts grade cross sectional area 95 sqmm 3 core laid in duct / trench/along pole etc including making connection complete all as specified and directed.

S & F in replacement of ACB 630 Amps 50KA 4pole with microprocessor release drawout type complete all as specified and directed by Engineer-In-charge.

Supply and fixing, in replacement, 11KV support insulator (high quality) suitable for 11KV VCB (make; Areva & CG), including busbar Insulation material and nut, bolts complete all as specified and directed.

Supply & fixing in replacement of transformer terminal box made out of MS Sheet of size 2mm thick in any shape and size both the side of transformer (HT/LT) complete with making hole, nuts & bolts as required at site complete all as specified and directed.

Supply and laying, in relacement, 1100 Volts grade heavy duty cable with PVC insulated aluminium standard conductor served with an inner sheathing of PVC tape and over all PVC Sheathed, in service connections, one twin core 10 Sqmm cable, flat or circular complete all as specified and directed.

Material & labour for providing 20mm broken stone aggregate including spreading and levelling complete all as specified and directed.

Supply and fixing in replacement of pla relays 3 C/O MDC 220D-5 suitable for 11KV VCB (make Areva) complete all as specified

Material and labour for cleaning / dihumidification and replacement of 11KV PVC busbar insulation (high quality), HT tape and nutbolts of complete VCB Panels (at TOP-1 & TOP-2) with the help of compressor, blow lamp, Vaccum machine etc complete all as specified and directed. Note:- cleaning / dihumidification of each power house i.e TOP1 or TOP2 as per this item will be treated as one Job.

Supply and fixing in replacement three phase over current + earth fault relay with high set MC 61 ANX, 4000, Volts 24 - 240 AC /DC type MC 61 ANX 4 NO, Make L&T or equivalent.

Supply and fixing in replacement as per existing Master Trip relay type VAJ Areva Model No VAJH13YF67B, LH Volts 220 DC or equivalant

Supply and fixing in replacement CT unit 100/50/5A, 15 VA 50Hz suitable for 11KV VCB Make Areva/Kirloskar/CG

Supply and fixing in replacement CT unit 150/50/5A, 15 VA 50Hz suitable for 11KV VCB Make Areva/Kirloskar/CG

Supply and fixing in replacement PT unit suitable for 11KV VCB Make Areva/Kirloskar/CG

S&F in replacement disc type porcelain white, brown or green insulator including one galvanized mild steel spindle, two galvanised iron washers & one galvanised nut for working pressure 11000 volts grade.all as specified and directed by Engr-in charge

S&F in replacement pin type porcelain white, brown or green insulator including one galvanized mild steel spindle, two galvanised iron washers & one galvanised nut 150mm height,150mm dia for working pressure 11000 volts grade.all as specified and directed by Engr-in charge

Excavates and relaying cables loops near the poles / transformers, cutting the damages/burnt parts of cable and reconnecting its into positions complete with thimbles, nut bolts, sleaves all as specified and directed by Engineer-in-Charge.

S&F in replacement HT Jumpers wire from top disc insulator to GOD and disc to disc in any lenth with complete nuts & thimbles all as required at site.

M&L in repalcement for galvanised steel wire 4 mm dia all as specified.

Supply and laying in replacement for GI steel tubing, 40mm bore, light grade with all fittings, laid in trenches / under roads / along pole / wall for protection of Cable / GI wire / GI strip etc complete all as specified and directed.

Material & labour for painting to mild steel cross arms, bracing, supports, clamps, back plate etc fixed on HT/LT Poles any height with providing two coats of aluminium paint over a coat one coat of red oxide primer complete all as specified and directed. Note:- Steel members fixed on single HT/LT pole shall be considered as 'One Unit'.

Material & labour for 2 Pole structure complete painting to mild steel cross arms, bracing, supports, clamps, back plate etc fixed on HT Poles any height with providing two coats of aluminium paint over a coat one coat of red oxide primer complete all as specified and directed. Note:- One 2 pole mild steel struture complete on HT PCC pole steel members fixed thereon shall be considered as 'One Unit'.

Material & labour for 4 Pole structure complete painting to mild steel cross arms, bracing, supports, clamps, back plate etc fixed on HT Poles any height with providing two coats of aluminium paint over a coat one coat of red oxide primer complete all as specified and directed. Note:- One 4 pole mild steel struture complete on HT PCC pole steel members fixed thereon shall be considered as 'One Unit'.

Labour only for removing of all grass vegetation, scapling shrubs and bushes under growth to include roots,trees and waste material under / along the span of OH HT Line , and removing rubbish upto distance of 1 mtr both side of OH Line.All uprooting/removal as mentioned will be done manually. Note:- RCC Duct cover slab removing and refixing deemed included in unit rate.

Material & labour for cleaning away all grass vegetation, scapling shrubs bushes under grouth roots and trees not exceding 30 cm grith and removing rubbish upto distance of 50 mtr out the periphery of area under cleaness, existing foliage / grass will be uprooted by machinery / maually as per the requirement and safety of cables complete all as specified and directed.

Taking out carefully manually by excavation of existing cable with loops and relaying with DWC pipe the same after repair of cutting the damages / burnt parts of cable and reconnecting its into original positions complete with cable joints all as specified and directed by Engineer-in-Charge.Note:-(i) HT/LT Cable Joint,DWC Pipe,PCC Cable cover & sand cushioning will be measured and paid sepearetly. (ii) Unit rate shall be included in excavation and returning filling.

S&F in replacement heavy duty aluminium thimble of size 185 to 240 sqmm complete all as specified

S&F in replacement heavy duty aluminium thimble of size 300 to 400 sqmm complete all as specified

Material and Labour straight through joint kit of heats shrinkable suitable for 185 sqmm to 300 sqmm HT 3 core 11000 volts XLPE cable type complete all as specified and directed.

Material and Labour in replacement for Out door End temination kit of heats shrinkable suitable for 185 sqmm to 300 sqmm HT 3 core 11000 volts XLPE cable type complete all as specified and directed.

Material and Labour in replacement for straight through joint kit of heats shrinkable suitable for 70 sqmm to 120 sqmm HT 3 core 11000 volts XLPE cable type complete all as specified and directed.

Material and Labour in replacement for Out door End temination kit of heats shrinkable suitable for 70sqmm to 120 sqmm HT 3 core 11000 volts XLPE cable type complete all as specified and directed.

Supply & Grouting in replacement for cable route indicator made of cast iron & fixed over an angle iron of 40 mm x 40 mm x 6 mm and 45 cm in length , painted with alumunium paint suitable for HT / LT Cable including PCC for grouting all as specified & directed by Engr - In - Charge.

Supply,laying & fixing in replacement for double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc.. all as specified and directed by Engr in Charge of sizes size 145mm outer dia and 126mm inner dia for LT UG cables. Make;-Telerex/Tirupati or E-in-C approved Make

Supply and erect in replacement PCC pole , M-30 design mix 11mtr long having 152mmx152mm at top and 152mmx260mm at bottom including reinforcement with high strength deformed steel TMT bars and necessary form work and erecting in position all as specified and as directed by Engr-in-Charge Note: (i) Excavation Earth work and foundation will be measured and paid seperately under relevent items.

Excavation in trenches in soft/ loose soil not exceeding 1.50 m wide and not exceeding 1.50 m in depth for foundation of poles, stay, cable, pipes etc and getting out complete all as specified.

Returning, filling, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each complete all as specified.

Removal of surplus spoil to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified.

Material and Labour for drilling hole under the road with the help of drilling machine without damaging the road horizontally for road crossing GI tubing of any size for cable protection complete all as specified and directed.

Material and labour for sand cushioning with a layer of fine sand 8 cm thick before laying the cable and 15 cm after laying the cable in trenches to cover under ground cable complete all as specified and directed. Note :-Punned down thickness of sand shall be considered for measurement)

Supply and laying in replacement for un-reinforced precast concrete cable cover factory made, class HV, type I, flat of size 300mm x 180mm x 40mm complete all as specified and directed.

Supply and laying in repalcement for GI steel tubing, 80mm bore, light grade with all fittings, laid in trenches / under roads / along pole / wall for protection of Cable / GI wire / GI strip etc complete all as specified and directed.

All as per Srl Item No 80.00 here-in-before but bore of pipe 100mm.

Supply and fixing in replacement of HT underground cable XLPE insulated PVC bedded, galvanised steel strip armoured electric power cables (heavy duty) with stranded aluminium conductor 11000 volts grade cross sectional area 120 sqmm 3 core laid in duct / trench/along pole etc including making connection complete all as specified and directed.

Supply and fixing in replacement of HT underground cable XLPE insulated PVC bedded, galvanised steel strip armoured electric power cables (heavy duty) with stranded aluminium conductor 11000 volts grade cross sectional area 300 sqmm 3 core laid in duct / trench/along pole etc including making connection complete all as specified and directed.

Material and labour for PCC 1:4:8 type D-2 using 40mm graded broken stone agg. as in mass concrete in foundation of poles including taking out old PCC complete all as soecified.

Material and labour for PCC 1:3:6 type D-2 using 20mm graded broken stone aggregate as in mass concrete in foundation of stays complete all as soecified.

M&L for taking out existing stone aggregate from the 66/11 KV substn completely for cleaning and spraying of anti grass chemical and filling new fresh stone aggregate of suitable sizes complete all as specified and directed by Engr in charge. Note:- Anti Grass chemical shall be included in the quoted rate.

Material & labour in replacement for mild steel cross arms, bracing, supports, clamps and back plate, fabricated from structural steel section including nuts, bolts and washers, welding, bending cold or hot drilling holes for bolts in any shape or size as indicated or directed and inclusive of two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed.

Material & labour in replacement for providing precast cement concrete 1:2:4, type B-1, using 20 mm graded aggregate in landings, cover slabs (for man holes etc) chajjas, water trouhghs, shelves and similar articles including form work complete all as specified and directed.

Supply and fixing, in replacement, air breather with silica gel suitable for 75 KVA to 160 KVA Transformers complete all as specified and directed.

Supply and fixing, in replacement, air breather with silica gel suitable for 200 KVA to 500 KVA Transformers complete all as specified and directed.

Supplying and fixing, in replacement, lightnenig arrestor, expulsion type, heavy duty, single pole, sutable for rated system on voltage suitable for 11 KV complete all as specified and directed.

Supply and fixing for earthing complete with galvanized iron earth plate electrode 600x600 x6.0mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connected to GI strip of size 32X6mm as earthing lead by means of nuts, bolts, check nuts and washers of galvanized iron or steel all as shown on Electrical Plate No 3 of SSR Part-I 2009, connected to earthing test point all as specified or indicated including testing on completion. The quoted unit rate shall include the following elements as given below :- (a) Earth electrode as mentioned above (b) Main earthing lead of 32X6 mm GI strip from earth electrode to test point up to 7.5 mtrs. (c) Connecting earthing lead and electrode all as specified and testing complete. (d) Adequate quantity of charcoal and salt (e) GI protection pipe of 40 mm dia light grade of length not less than 5.00 mtrs. (f) Necessary excavation, earth work and PCC pit , angle iron 40x40x6mm frame including RCC cover.

All as per Srl Item No 91.00 but earth lead galvanised iron wire of 4mm dia connected by means of GI nuts, bolts and washers, 15mm bore light grade GI protection pipe

Supply and fixing for earthing complete with copper earth plate electrode 600x600 x 3.15mm thick burried directly in ground( earth pit not less than 3.00 mtr deep below ground level) with top edge of earth plate not less than 2.0 mtr below normal ground level ,connected to copper strip of size 32X6mm as earthing lead by means of nuts and bolts check nuts and washers of copper/brass all as shown on electrical plate No -3 of SSR 2009- Part 1 connected to earthing test point all as specified or indicated including testing on completion. The quoted unit rate shall include the following elements as given below :- (a) Copper earth electrode as mentioned above (b) Main earthing lead of 32X6 mm copper strip from earth electrode to test point up to 7.5 mtrs. (c) Connecting earthing lead and electrode all as specified and testing complete. (d) Adequate quantity of charcoal and salt. (e) GI protection pipe of 40 mm dia light grade of length not more than 5.00 mtrs. (f) Necessary excavation, earth work and PCC pit , angle iron 40x40x6mm frame including RCC cover.

Supplying & fixing in replacement earth continuity conductor or main earthing lead of GI strip size 32x6 mm, fixed to wall, on batten or recess/chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthling etc including suitable nuts and bolts complete all as specified and directed.

Kaul Enterprises

CHINAR ENGINEERS AND BUULDERS

Raman Electric Trading Co

kailu construction co

R D Bansal

Shree Balaji Construction