Construction of (G Plus 2) New Building for Skill Development Centre at Odisha State Open University, Basantpur, Goshala, Sambalpur, Odisha

Sl No. Unit Quantity Rate (Rs.) NS Item (Rs.)

CIVIL WORKS

Cleaning & grubbing road land including uprooting rankvegetation,grass

,bushes, shurbes,sapling and trees girth upto 300mm ,removal of stumps of

trees cut earier and disposal of unsevicable materials and stacking of servicable

materials to be used or auctioned up to lead of 1000 meters including removal

and disposal of top organic soil not exceeding 150mm thickness.

Earth work in all kinds of soil within 50m lead and 1.5m lift including rough

2 dressing and breaking clods to maximum 5cm. To 7cm. And laying in layers CUM 682.21 326.73 2,22,898.61

not exceeding 0.3m in depth and as per specification complete.

1.50m to 2.00m CUM 682.21 357.88 2,44,150.82

Filling in foundation, trenches and plinth with river sand, well watered and

compacted in layers of 1.8 mtr, with top surface dressed and leveled to proper

3 gradient including cost of all materials, conveyance, all taxes and royalties, CUM 524.72 1,298.74 6,81,476.64

loading and unloading, including cost of all labour, sundries, T & P etc. All

complete as per directions of the Engineer -in-charge.

Filling available excavated earth (excluding rock) in trenches plinth sides of

foundation etc. in layers not exceeding 20 cm in depth , consolidating each

4 deposited layers by ramming and watering, lead up to 50m and lift up to 1.5 mt CUM 909.61 181.52 1,65,111.86

etc. including cost of all labour, sundries T & P etc complete in all respect as

per the direction of Engineer-In-Charge.

Excavating, supplying, stacking and filling of local earth (including royalty) by

mechanical transport upto a lead of 5km also including ramming and watering

of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides

of foundation etc. complete for all lift.

Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size

clean hard black crusher broken granite stone metal of approved quality and

from approved quarry including hoisting, lowering and laying concrete in layers

6 not exceeding 15 cm. (6") thick to the required level ramming, watering, curing CUM 182.8 7,058.93 12,90,371.53

etc. complete including cost, conveyance, royalties of all materials with all

labour and T&P required for the work etc. complete in all respect and as per

the direction of the Engineer-in-charge.

Providing & applying of pre constructional anti-termite treatment Confirming to

IS 6313 (Part-II) and creating chemical barrier under and around the column

pits, wall trenches, basement excavation top surface of plinth filling, junction of

wall and floors along with external perimeters of building, expansion joints,

surrounding the pipes and conducts etc. at the rate at 7 ,5 liter per sqm on

7 vertical surface and 5.0 liter per sqm on horizontal surface. Chemicals:- SQM 1150 123.36 1,41,860.78

Imidachloprid 30.5 SC , Doses: - 2.1 ml per lit of water cost of all materials,

labour,conveyance, T&P , all taxes and hire charges of machinaries as per

direction of Engineer-incharge. (Make :- HI-Solution or Smart Care Pest

Control or Bharat Pest Eradicators)

Fly Ash brick masonry in cement mortar (1:6) in F&P using Fly Ash bricks of

25 Cm. x 12 Cm. x 8 Cm. size having a crushing strength of not less than 75

kg./sqcm with dimensional tolerance ± 2% including splays cutting circular

moulding chamfering and corbelling and similar such type of works with all

8 necessary projections watering and curing after immersing the bricks in water at

least for six hours before use including cost, conveyance, royalties and taxes of

all materials with all labour,labour cess and T & P required for the work

complete in all respect as per direction of Engineer-in-Charge.

R.C.C. work M-25 grade with 20mm and down grade black hard granite

9 (crusher broken) stone chips including centering and shuttering work. -

Foundation and Plinth CUM 178.43 8,083.02 14,42,253.90

Column Below Plinth CUM 42.49 19,013.26 8,07,873.31

Lift Pit Wall CUM 5.91 17,963.49 1,06,164.25

Lift pit slab and Grade Slab CUM 75.76 8,083.02 6,12,369.87

Plinth Beam CUM 73.46 9,110.02 6,69,222.42

Ground Floor -

Column CUM 46.51 19,013.26 8,84,306.60

Staircase CUM 10.51 18,858.55 1,98,203.34

Lintel CUM 18.07 17,125.68 3,09,461.08

Chajja SQM 45.96 1,486.00 68,296.45

Roof Beam CUM 105.84 19,013.26 20,12,363.16

Roof Slab CUM 149.45 16,635.65 24,86,198.16

First Floor -

Column CUM 44.48 21,431.57 9,53,276.37

Staircase CUM 10.32 21,245.92 2,19,257.93

Lintel CUM 9.86 19,166.40 1,88,980.68

Chajja SQM 26.16 1,693.21 44,294.26

Roof Beam CUM 99.32 21,431.57 21,28,583.83

Roof Slab CUM 136.42 18,578.43 25,34,469.07

Second Floor -

Column CUM 44.48 24,326.36 10,82,036.53

Staircase CUM 10.32 24,103.54 2,48,748.55

Lintel CUM 9.65 21,608.07 2,08,517.83

Chajja SQM 27.18 1,941.40 52,767.12

Roof Beam CUM 99.55 24,326.36 24,21,689.22

Roof Slab CUM 137.55 20,902.52 28,75,141.63

Terrace Floor -

Column CUM 6.73 27,791.75 1,87,038.47

Lintel CUM 2.2 24,529.90 53,965.78

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

Chajja SQM 2.16 2,238.67 4,835.53

Roof Beam CUM 6.5 19,660.36 1,27,792.32

Roof Slab CUM 11.58 23,683.13 2,74,250.66

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of

primary steel producers as per approved maklist (FE 500 or above) including

bending, binding, welding and jointing if necessary and tying the grills and

placing in position as required for R.C.C. Work and for providing fan hooks as

required, hoisting, lowering, laying including cost, conveyances, taxes of M.S.

10 Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the

work for bending, binding and tying the grills in all floors with labour cess etc.

(payment will be made on standard weight of B.I.S. for M.S. Rods or tor steel

only) etc. complete as per specification & direction of Engineer-in-charge.

Foundation and plinth Qntl 461.83 10,663.67 49,24,803.55

Ground Floor Qntl 406.36 10,663.67 43,33,289.67

First Floor Qntl 366.58 10,703.13 39,23,553.76

Second Floor Qntl 355.55 10,744.57 38,20,232.79

Terrace Floor Qntl 34.15 10,788.08 3,68,412.90

Fly Ash brick masonry in cement mortar (1:6) in super structure using Fly Ash

bricks of 25 Cm. x 12 Cm. x 8 Cm size having a crushing strength of not less

than 75 kg./sqcm with dimensional tolerance ± 2% including splays cutting

circular moulding chamfering and corbelling and similar such type of works

11 with all necessary projections watering and curing after immersing the bricks in

water at least for six hours before use including cost, conveyance, royalties and

taxes of all materials with all labour,labour cess and T & P required for the

work complete in all respect as per direction of Engineer-in-Charge.

250mm Wall -

Ground Floor CUM 233.08 7,105.33 16,56,111.39

First Floor CUM 112.26 7,551.82 8,47,767.65

Second Floor CUM 106.89 8,065.30 8,62,099.92

Terrace Floor CUM 87.67 8,655.77 7,58,851.53

Providing Fly ash bricks masonry work using 25 Cm. x 12 Cm. x 8 Cm having

crushing strength not less than 75Kg/Sqcm in cement mortar (1:4).

Immersing the bricks in water before use in all necessary projection splays

12 cutting, circular moulding, corbelling etc. Including cost of conveyance ,taxes

& royalties, loading and unloading of all materials & cost of all labour,

scaffolding ,watering & curing ,sundries, T & P etc. complete as per the

direction of Engineer-in-charge . -

120 mm Wall -

Ground Floor CUM 27.08 7,357.09 1,99,229.93

First Floor CUM 40.45 7,803.58 3,15,654.65

Second Floor CUM 36.5 8,317.05 3,03,572.43

Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with

screened and washed sharp sand for mortar and finished smooth to the rough

surface of walls in all heights after racking out joints including watering and

13 curing, rounding of corners, providing grooves where ever necessary with cost,

conveyance, royalties of all materials with cost of all labour,labour cess, T&P,

and scaffolding required for the work etc. complete in all respect as directed by

the Engineer in charge. -

Ground Floor SQM 647.87 330.34 2,14,018.02

First Floor SQM 615.35 344.10 2,11,741.81

Second Floor SQM 580.19 358.54 2,08,023.06

Terrace Floor SQM 657.88 373.72 2,45,861.47

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with

screened and washed sharp sand for mortar and finished smooth to the rough

surface of walls in all heights after racking out joints including watering and

14 curing, rounding of corners, providing grooves where ever necessary with cost,

conveyance, royalties of all materials with cost of all labour,labour cess, T&P,

and scaffolding required for the work etc. complete in all respect as directed by

the Engineer in charge. -

Ground Floor SQM 2776.29 229.75 6,37,841.52

First Floor SQM 2103.07 235.26 4,94,761.10

Second Floor SQM 2596.59 240.93 6,25,602.66

Terrace Floor SQM 193.06 246.79 47,644.35

Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with

screened and washed sharp sand for mortar and finished smooth to R.C.C.

work after closed deep chipping & slurry treatment including watering and

15 curing, rounding of corners, providing grooves where ever necessary with cost,

conveyance, royalties of all materials with cost of all labour, T&P, and

scaffolding required for the work etc. complete in all respect as directed by the

Engineer in charge. -

Ground Floor SQM 378.34 253.28 95,824.14

First Floor SQM 182.94 360.50 65,950.20

Second Floor SQM 182.23 266.39 48,543.34

Terrace Floor SQM 98.04 273.25 26,789.68

Supplying, fitting & fixing of 8-10 mm thick & size of 300x300 mm

Industrial vitrtified floor tiles in floors of approved make laid on 20 mm thick

16 cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry

including cost of all materials, labour T&P etc required for the work all

complete as per direction of the Engineer-in-charge - -

Ground Floor SQM 71.21 1,242.78 88,498.08

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

Providing vitrified tiles having thickness of min 10mm conforming to IS 13755

of 600x1200 (shade to be decided as per Ama Hospital scheme)

(homogeneous) of premium quality in floors, treads on steps and landings on

20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient

with screened and washed sharp sand for mortar and fixing with neat white

cement slurry,grouting the joints with neat white cement slurry mixed with

17 required quantities of pigments of approved make to match the shades of the

vitrified tile if required , watering and curing for 21 days, including cost,

conveyance, loading, unloading, royalties and taxes of all materials, cost of all

labour,Labour cess, sundries, T&P required for the work, complete in all

respect as per specification and direction of Engineer-in-charge.

Ground Floor SQM 839.63 1,303.11 10,94,129.75

First Floor SQM 861.24 1,303.11 11,22,289.94

Second Floor SQM 780.41 1,334.90 10,41,768.22

Providing, fitting, fixing vitrified tiles of premium grade having thickness 8mm

to 10mm confirming to IS 13756 of size 600mm x 600mm Plain (Ivory) as

directed by Engineer-in-charge in dados skirting and risers of steps on 12mm

18 thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment

to match the shades of the tiles including rubbing and polishing etc. complete

with cost, conveyance, royalties of all materials all labour, labour cess complete

in all respects -

Ground Floor SQM 349.84 1,511.32 5,28,720.33

First Floor SQM 93.13 1,535.24 1,42,976.81

Second Floor SQM 117.87 1,559.16 1,83,777.91

Supplying fitting, fixing ,ceramic glazed tiles 30cm x30 cm / 40cm x40 cm in

floors of size of approved make with 20mm thick bed of cement mortar (1:4)

19 jointed with neat cement slury mixed with pigment to match the shades of the

tiles complete including cost of all materials,Labour T&P etc required for the

Ground Floor SQM 42.15 1,075.24 45,321.35

First Floor SQM 59.08 1,091.13 64,464.21

Second Floor SQM 75.35 1,107.03 83,414.62

Supplying & Fixing ceramic tiles in Dados, Skirting and risers of steps on 12

mm thick cement plaster (1:3) Jointed with neat cement slury mixed with

pigments to match the shade of the tiles including rubbing and polishing

including cost of all meterials etc. complete. - -

Ground Floor SQM 177.87 1,020.69 1,81,549.81

First Floor SQM 212.99 1,036.58 2,20,781.77

Second Floor SQM 283.5 1,053.27 2,98,601.48

Providing and installing two component acrylic modified cementitious

waterproofing coating with masterseal 551/ Equivalent over roof slab after

carring out pond test on roof slab filling all defects. Saturating the surface

mixing the products and then application in 2.0 mm thickness (1.8kg/sqm

21 coverage rate for 1.0mm thickness) in suitable layers complete in all respect all

material, tools, plant & labour complete in all respect. Density 1850kg/m3, mix

ratio (Powder to liquid ) 3.1 by weight water.

A base coat of multifunctional polymer emulsion mixed with cement in the ratio

of 1:2 will be applied using a brush or roller, followed by a second coat to

achieve full saturation of the embedded membrane. The coating shall be applied

at an ambient temperature between 5°C and 35°C, and the substrate humidity

shall not exceed 10%. The treated surface will be protected from rain until it is

fully dry. SQM 642.25 385.86 2,47,818.59

Providing & Fixing horizontal level suspended ceiling comprising of

Aluminium Lay-in Plain 600x600mm (Nominal Size) tiles made of AA-3003-

H14 (Tempered) grade Aluminium suitable for architectural finishes in 0.7mm

thickness as per in IS:2676 (1981) in Global white color with Square Tegular

edge having 8mm drop and 10mm flange. The difference between the 2

diagonal dimensions of the tile to be less than 1mm. Tiles shall be flattened by

precision leveller to minimize sag to less than 1/400mm. The tile shall be

electrostatically polyester powder coated using RoHS compliant powder having

coating thickness ranging from 60-80 microns. The powder coating shall pass

Salt Spray Test for 750 hours as per ASTM B117, QUV –A Test for 1000

hours as per ASTM G-154 – (Cycle – 1) and Humidity test for 1000 hours as

per DIN 50017. The powder coating shall have an adhesion of GT0 as per EN

ISO 2409. The shade variation across batches shall be delta E<1 using

Excite/BYK Gardner instrument and gloss level of 25±5% at 60˚ as per ASTM

D523.The tile shall have a Light Reflectance of ≥ 63% in accordance to ASTM

1477-98 and Fire Performance of class 0/1 as per BS 476 Part 6 & 7 in module

size of 600x600mm. All border cut tiles shall be laid, using Knauf lay-in end

cap for installation to have a tegular effect on perimeters.

Fixing granite tiles of approved dimension area above 0.4 sqm (20mm thick) in

floor, treads of steps and landing on 20mm thick bed of cement mortar (1:4)

jointed with neat cement slurry mixed with pigment to match the shades of the

tiles including rubbing and polishing etc. complete with cost, conveyance,

royalties of all materials complete in all respects as per direction of Engineer-in-

Charge. - -

Ground Floor SQM 136.89 3,341.94 4,57,477.76

First Floor SQM 65.86 3,357.83 2,21,146.79

Second Floor SQM 66.33 3,373.73 2,23,779.26

Supplying, fitting & fixing of Granite Tiles of minimum Above 0.10 Sqm & up

to 0.4 sqm (10mm. thick) of approved make in dadoes laid on 12 mm thick

cement mortar (1:3) (1 cement : 3 course sand) and filling joints with slurry

including cost of all materials, labour T&P etc. required for the work all

complete incl. rubbing as per direction of the Engineer-in-charge

Ground Floor SQM 6.29 2,440.66 15,351.78

First Floor SQM 6.29 2,464.58 15,502.23

Second Floor SQM 6.29 2,604.92 16,384.95

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

Providing and fixing 12 mm thick frameless toughened glass door shutter of

approved brand and manufacture, including providing and fixing top & bottom

pivot & double acting hydraulic floor spring type fixing arrangement and

26 making necessary holes etc. for fixing required door fittings, all complete as per

direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid

separately).DSR 2023 P-300 Sl no-21.18 - -

Ground Floor SQM 11.52 5,325.89 61,354.31

Interia door hardware Each 2 4,130.00 8,260.00

Two track two panels sliding door with Aluminium channel for roller track,

wool pile, zinc alloy (zamak) powder coated handle on every panel along with

multi-point locking system, adjustable nylon rollers with SS 304 body.(DSR

2023, Page No: 159, Item No-9.147.B1.1) - -

First Floor SQM 2.52 8,106.31 20,427.89

Interia door hardware Each 1 3,540.00 3,540.00

Providing and fixing non load bearing fixed frame for fire resistant glazed

partition for 120 minutes fire rating, made out to a profile of dimension 60 mm

x 70 mm of 1.6 mm thick galvanised steel sheet as per test evidencesuitable for

fixing fire rated glass for 120 minutes of both integrity & radiation control

(EW120) & minimum 20 minutes of insulation (EI20).The profile has to be

fixed to the supporting construction by means of anchorfasteners of size M10 x

80, every 150 mm from the edges and every 500 mm (approx) c/c. Linear

28 measurement of frame shall be measured for payment. The frame shall be filled

with mineral wool insulation of density minimum 96kg/ cum and finished with a

approved fire resistant primer or powder coating of not less than 30 micron in

desired shade as per NBC 2016, IS 16231 (Part 3):2016 and directions of

Engineer - in- Charge (DSR 2023- Cl. 9.163 P-166).

Providing and fixing 60 mm thick glazed fire resistant door shutters of 120

minutes Fire rating conforming to IS:3614 (Part II) or EN1634-1:1999, tested

and certified as per laboratory approved by Engineer-in-Charge,with suitable

mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm

x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6 mm thick

G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled mineral wool

29 insulation having density minimum 96 kg/ cum and fixing with necessary

stainless steel ball bearing hinges of size 100x89x3 mm of approved make,

including applying a coat of approved fire resistant primer or powder coating

not less than 30 micron etc all complete as per direction of Engineer-in-Charge

(panelling to be paid for seperately).(DSR 2023- Cl. 9.162 P-166).

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid door/window /Clerestory windows & other Frames/

Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension

Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat

husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)

fabricated with miter joints after applying PVC solvent cement and screwed

with full body threaded star headed SS screws having minimum frame density

of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge),

30 minimum compressive strength of 58 N/mm2, modulus of elasticity 900

N/mm2 and resistance to spread of flame of Class A category with property of

being termite/borer proof, water/moisture proof and fire retardant and fixed in

position with M.S hold fast/lugs/SS dash fasteners of required dia and length

complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS

dash fasteners shall be paid for separately). Frame size 65 x 125mm (DSR- Cl.

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid decorative type flush door shutter of 30 mm thick of required

size comprising of virgin polymer of K value 58-60 (Suspension Grade),

calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and

non toxic additives (maximum toxicity index of 12 for 100 gms) having

minimum density of 650 kg/cum and screw withdrawal strength of 1800 N

(Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus

of elasticity 850 N/mm2 and resistance to spread of flame of Class A category

31 with property of being termite/borer proof, water/moisture proof and fire

retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of

approved design pasted with hot melt adhesive on both faces of shutter and

fixing with stainless steel butt hinges of required size with necessary full body

threaded star headed counter sunk S.S screws, all as per direction of Engineer-

In- Charge. (Note: stainlesssteel butt hinges and necessary S.S screws shall be

paid separately) (DSR 2023, Page No: 342, Item No-26.88.1)

Door Hardware Each 106 3,540.00 3,75,240.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid door/window/ clerestory windows & desertory other

Frames/Chowkhat of Frame size 45 x 70 mm comprising of virgin PVC

polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural

fibers (wood powder/ rice husk/ wheat husk) and non toxic additives

(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after

applying PVC solvent cement and screwed with full body threaded star headed

SS screws having minimum frame density of 750 kg/ cum, screw withdrawal

32 strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of

58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame

of Class A category with property of being termite/borer proof, water/moisture

proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash

fasteners of required dia andlength complete as per direction of Engineer-In-

Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately).

(DSR 2023, Page No: 341, Item No-26.86.1)

Providing and fixing factory made single extruded WPC (Wood Polymer

Composite) solid decorative type flush door shutter of 30 mm thick of required

size comprising of virgin polymer of K value 58-60 (Suspension Grade),

calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and

non toxic additives (maximum toxicity index of 12 for 100 gms) having

minimum density of 650 kg/cum and screw withdrawal strength of 1800 N

(Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus

of elasticity 850 N/mm2 and resistance to spread of flame of Class A category

33 with property of being termite/borer proof, water/moisture proof and fire

retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of

approved design pasted with hot melt adhesive on both faces of shutter and

fixing with stainless steel butt hinges of required size with necessary full body

threaded star headed counter sunk S.S screws, all as per direction of Engineer-

In- Charge. (Note: stainlesssteel butt hinges and necessary S.S screws shall be

paid separately) (DSR 2023, Page No: 342, Item No-26.88.1)

Door Hardware Each 20 2,360.00 47,200.00

Supplying , fitting and fixing of two track UPVC sliding window of approved

34 make with 6mm thick glass of approved quality complete with frame, shutters

and all fitting and fixtures. SOR 2022 P-235 Sl No-12 SQM 163.22 5,853.94 9,55,480.84

Fixed window / ventilator without mullion / transom. :Using R1 series with

35 frame (33mm & above ) x (35mm & above). (Height upto 0.90 metre) (DSR

Vol-1,2023 P-160, Clause No-9.147.C2.1) SQM 13.8 9,155.20 1,26,341.69

Design supply & installation of suspended Spider Glazing system designed to

withstand the wind pressure as per IS 875 (Part-III). The Suspended System

held with Spider Fittings of SS-316 Grade Steel of approvedmanufacturer with

glass panel having 12 mm thick clear toughened glass held together with SS-

316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21

mm thick. The Glass fins and glass panel assembly shall be connected to

Slab/beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts

and at the bottom using SS channel of 50x25x2 mm using fastener & anchor

bolts, non staining weather sealants of approved make, Teflon/ nylon bushes

and separators to prevent bi-metallic contacts, all complete to perform as per

specification and approved drawings. The complete system to be designed to

36 accommodate thermal expansion & seismic movements etc. The joints between

glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the

assembly to be filled with non staining weather sealant, so as to make the entire

system fully water proof & dust proof. The rate shall include all design,

Engineering and shop drawing including approval from structural designer,

labour, T&P, scaffolding, other incidental charges including wastage, enabling

temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener,

anchors, SS channel laminated glass etc. all complete. For the purpose of

payment, actual elevation area of Glazing including thickness of joints and the

portion of Glass panel inside the SS channel shall be measured. (DSR 2023,

Page No: 317, Item No-25.8)

Supplying and Fixing of M.S.Doors, M.S. Gate etc including cost,conveyance

37 of all materials,priming,and labour for fitting fixing etc.complete as per the

instruction of Engineer-in-Charge. Kg 2116 81.89 1,73,283.47

Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates,

garage door, collapsible gates with top and bottom rails, steel windows, critical

frames for windows, stair case and parapet railing made out of M.S Square bar/

flat including stair case hand railing with 40mm. dia G.I.pipe etc. including

38 painting two coats over a coat of redoxide primer as per approved drawing and

design with cost of all materials & labour, labour cess, T&P, sundries etc.

complete in all respect as per specification & direction of the Engineer-in-

Charge. Kg 8618.73 81.89 7,05,805.04

Painting two coat with approved synthetic enamel paint to new iron work over

a coat of Red oxide primer including cost, conveyances, royalties, taxes of all

39 materials and cost of all labour with T&P required for the work etc. complete

as per specification & direction of Engineer in charge.

Ground Floor SQM 141 312.46 44,057.42

First Floor SQM 60.81 320.37 19,481.70

Second Floor SQM 60.81 328.75 19,991.17

Terrace Floor SQM 7.56 337.13 2,548.67

Finishing plastered surfaces of walls with cement based wall putty (Water

based) of approved make (JK White/ Birla white or equivalent make duly

approved by Engineer-in-Charge) and finishing the surface smooth and even by

40 sand papering to receive painting in walls, at all heights with staging wherever

necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc.

required for the work complete in all respect as per the direction of the

Engineer-in-charge. SQM 8160.71 100.54 8,20,445.14

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

Priming one coat with wall cement primer (water bound) to make an even

finished surface in all floors and heights to wall surface of approved make and

shade including sand papering, applying putty wherever necessary & cost of

scaffolding, staging charges with cost, conveyance, cost of all labour,labour

cess T&P etc. complete as per the direction of the Engineer-in-charge.

Ground Floor SQM 3802.5 97.47 3,70,622.07

First Floor SQM 3023.9 99.83 3,01,869.89

Second Floor SQM 3359.01 102.19 3,43,250.51

Terrace Floor SQM 948.98 104.78 99,437.92

Finishing walls with textured exterior paint of required shade.New work (Two

or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of

exterior primer applied @2.20kg/10 sqm. DSR 2023 P-203 Sl No-13.45.1

Ground Floor SQM 869.94 263.85 2,29,531.93

First Floor SQM 798.29 263.85 2,10,627.22

Second Floor SQM 642.56 263.85 1,69,538.17

Terrace Floor SQM 662.92 263.85 1,74,910.12

Painting two coats with plastic emulsion paint with a approved quality primer

to make an even finished surface in all floors and heights to wall surface of

approved make and shade including sand papering, applying putty wherever

necessary & cost of scaffolding, staging charges with cost, conveyance, cost of

all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-

charge. - -

Ground Floor SQM 2932.56 128.54 3,76,943.64

First Floor SQM 2225.64 131.11 2,91,803.22

Second Floor SQM 2716.45 133.78 3,63,397.45

Terrace Floor SQM 286.06 138.53 39,628.46

Supplying and fixing of Elastomeric Membrane of 200mm x 2mm size for

expansion joint sealing from approved manuefacturer, fixing with epoxy

adhesive of approved quality complete. SOR 2022 P-234 Sl No-11

Providing 2.5cm thick Grading Concrete over roof slab with cement concrete

(1:2:2) using 6mm size black hard granite crusher broken chips and screened &

washed sharp sand for mortar and finished smooth to the rough surface of slab

44 including watering and curing with cost, conveyance, royalties of all materials

with cost of all labour, labour cess and T&P required for the work etc.

complete in all respect as directed by the Engineer in charge.

TOTAL CIVIL -A - 7,31,29,144.20 9,62,247.23

Electrical Works-B -

A. Circuit Cum Wiring -

Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with

1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked with 20 mm

dia HMS FRLS PVC conduit ISI marked 6A modular type switch ISI marked

and ceiling rose ISI marked of modular type G.I box with metallic cover plate

1 (both side) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated

single core multistandard copper conductor as earth wire including all

accessories and connection as per direction of Engineer -in -Charge.

a) Group-C Nos 602 1,525.74 9,18,495.48

Supplying & Wiring from first light point to next Light Point (Secondary Point)

with 1.5 sqmm FRLS PVC insulated copper conductor single core cable in

2 surface / recessed 1.6 mm thick PVC conduit and earthing the point with 1.5

sqmm FRLS PVC insulated copper conductor single core cable including

required single rose and Metal box. Nos 363 953.44 3,46,098.72

Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with

1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked with 20 mm

dia HMS FRLS PVC conduit ISI marked 6A modular type 2Way switch ISI

marked and ceiling rose ISI marked of modular type G.I box with metallic

3 cover plate (both side) of suitable size, modular box with 1.5 sq. Mm FRLS

PVC insulated single core multistandard copper conductor as earth wire

including all accessories and connection as per direction of Engineer -in -

Charge. Each 9 1,472.64 13,253.76

Supplying, fixing of 6A switch socket on the same board in existing switch

board with complete fitting by 01 no of 6A switch & socket (modular type) &

4 other required accessories of ISI marked as approved as per direction of Engg. -

in -Charge. (Maximum 02 nos point in one circuit).

Supplying, fixing of 6A switch socket on the separate board with complete

fitting by 01 no of 6A switch & socket (modular type) with suitable size

5 modular box & cover including supplying of all required accessories of ISI

marked as approved as per direction of engg-in-charge.

Supplying, fixing of 6A switch socket on the separate board with complete

fitting by 02 no of 6A switch & socket (modular type) with suitable size

6 modular box & cover including supplying of all required accessories of ISI

marked as approved as per direction of engg-in-charge.

Supplying,fixing of 1x16A socket on the separate board with complete fitting

by 01 no of 16A switch & socket(modular type) with suitable size modular box

& cover including supplying of all required accessories of ISI marked as

approved as per direction of engg-in-charge. Nos 114 810.66 92,415.24

Supplying,fixing of 2x16A socket on the separate board with complete fitting

by 02 no of 16A switch & socket(modular type) with suitable size modular box

& cover including supplying of all required accessories of ISI marked as

approved as per direction of engg-in-charge. Nos 46 1,480.90 68,121.40

Supplying and installation of 25A AC starter Modular type, coil voltage-230

9 Volt A.C. on mod Box of suitable size including modular coveras required as

per direction of Engg.-in-Charge . Each 25 2,655.00 66,375.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

Receass wiring for circuit/submain wiring with the following mentioned size

Pvc Frls insulated, copper conductor, single core cable in recessed HMS Frls

Pvc conduit of mentioned size as required as per direction of Engg.-in-Charge.

2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of

single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia

non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS

POINT ) (2X2.5+1X1.5) Mtr 6780 204.14 13,84,069.20

2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of

single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia

non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT)

(2X4+1X1.5) Mtr 2775 225.38 6,25,429.50

2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of

single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia

non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (2X6+1X2.5)

4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of

single core 4 sq. mm copper wire for earth continuity conductor in 32 mm dia

non metallic heavy duty conduit.(LFDB TO LBDB) (4X6+2X4)

4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of

single core 6 sq. mm copper wire for earth continuty conductorin 32 mm dia

non metallic heavy duty conduit .(LFDB TO FLOOR PANEL TO TPN BDB

power) (4X10+2X6) Mtr 550 526.28 2,89,454.00

B. Fan & indoor Fixtures -

Supplying, installation, testing and commissioning following type of light

fixtures with dummy box for surface mounted fixtures only, fans and exhaust

11 fans with all accessories, as required.(The colour temprature for fixtures shall

be above 4000 deg K, CRI Min 80 & white in colour as per application)

Supplying an fixing of recess/surface mounted 2'x2' 36 W square shaped LED

with lumen efficacy not less than 130lm/W, CRI not less than 80, CCT of 5700-

6500 degree K, THD less than 10%,internal surge protection of 3 KV,

complete with Non integrated isolated electronic driver (protects the output

a) /secondary side from any disturbance on the input / primary side ensuring safe

operation)and all other accessories suitable for operation on140- 270 V, 50 Hz

,L70 @50,000 burning hrs (5 years warranty) as required as per direction of

Engg.-in-Charge.

Supplying and fixing of Energy efficient surface /recess mounted square

/round shape 18 W LED luminaire of dimension of consists of white powder

coated , die-cast Alluminium housing with high quality frosted diffuser for

glare-free uniform lighting distribution with wattage not more than 18 watt and

b) lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree

K,THD less than 10%, with electronic driver, internal surge protection of 3 KV

, L70 B50: 50000 hrs and all other accessories suitable for operation on 220

V to 240 V supply as required as per direction of Engg.-in-Charge.

Supplying and fixing of Energy efficient surface /recess mounted square

/round shape 9 W LED luminaire of dimension of consists of white powder

coated , die-cast Alluminium housing with high quality frosted diffuser for

glare-free uniform lighting distribution with wattage not more than 9 watt and

c) lumen output of 900 lumens, , CRI not less than 80,CCT of 6000 degree

K,THD less than 10%, with electronic driver, internal surge protection of 3 KV

, L70 B50: 50000 hrs and all other accessories suitable for operation on 220

V to 240 V supply as required as per direction of Engg.-in-Charge.

SITC of energy efficient LED tube light fittings with decorative alluminium

batten and LED tube light having power rating not more than 20 watt and

lumen output not less than 2000 lumen complete with electronic driver and all

d) other accessories with diffuser having 2 years warranty i/c connection etc as

required as per direction of Engg.-in-Charge.

SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate

housing,High optically efficient diffuser,above wash basin complete with all

e) accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS

PVC insulated, copper conductor, single core cable and earthing etc. as

required as per direction of Engg.-in-Charge. Each 31 868.48 26,922.88

Dia cast Aluminum with Polycarbonate cover IP65 type 1000 Lumen/ 10W

LED Bulkhead wall fitting. Each 30 1,203.60 36,108.00

Supplying, installation, testing and commssioning of 1200 mm sweep

white/milky colour BLDC ceiling fan with aluminium blades having wattage not

more than 28W and air delivery ≥215m3/min including wiring the down rod of

12 standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor,

single core cable etc. as required as per direction of Engg.-in-Charge,

Replacement Warranty will be 4 years. (With fan Regulator)

Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm

with louvers of exhaust fan in the existing wall, including fixing & conntection

as required as per direction of Engg.-in-Charge. Replacement Warranty will be

2 years. Each 27 3,693.40 99,721.80

Supplying, installation, of Heavy duty exhaust fan of heavy duty 380 mm sweep

1400 rpm with louvers of exhaust fan in the existing wall, including fixing &

conntection as required as per direction of Engg.-in-Charge. Replacement

Warranty will be 2 years. Each 15 4,519.40 67,791.00

C. Panels, MDBs, DBs. MCBs -

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

Supply, installation, testing and commissioning of cubicle type sectionalised,

front operated top entry dust and vermin proof M.V. Panel Boards suitable for

operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of

2.0 mm (14 SWG) thick at outer and 1.6mm for inner partition CRCA sheet for

frame work and covers, 3mm thick for gland plated i/c cleaning & finishing

complete with 7 tank process for powder coating in approved shade, having

suitable capacity extensible type FP Aluminium alloy Bus bars of high

conductivity with heat shrienkable PVC sleeve, DMC.SMC bus bar supports,

with short circuit withstand capacity of 70 KA for 1 sec. bottom base channel

of MS section not less than 100mm x 50mm x 5mm thick, fabrication shall be

done in transportable sections, wiring with space heater, thermostat and control

MCBs shall be provided for all vertical sections of main LT Panel, all hinged

door shall be earthed through 2.5 sq mm tinned braided.

The incoming and outgoing feeders shall be accommodated in a modular

arrangement, detachable gland plates, adequate size cable alley, Sign writing,

Painting, Earthing entire panel shall have a common earth bar of suitable size at

the rear with 2 Nos earth solid connections from main bus bar to switch gears

with required 1.5 sq.mm. zero halogen fire retardant low smoke insulated

copper conductor s/c cable, cable alleys, cable gland plate in two half,

Numbering, Danger plate, including PVC insulated copper FRLS wires of

minimum 1.5 sq.mm & 2.5 sq.mm for CT's etc. with all accessories including

interconnections, earth bus, Surge protection Device(SPD) etc. as required.

LT Panel (To be installed inside the Electrical Room at Ground Floor)

Busbar - 400 Amp Al busbar with SC rating of 36 KA suitable for operation at

415 Volt, 50 Hz, 3 Phase supply. -

One (1) No Incomer from EB Source each comprising of -

One (1) - 320 Amp FP, 36 KA,Thermal magnetic based released MCCB with

3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 320/5 A 10VA Cl

1.0 CTs, Digital Voltmeter, Ammeter With S/S. -

One (1) No Incomer from DG Source each comprising of -

One (1) - 320 Amp FP, 36 KA,Thermal magnetic based released MCCB with

3 Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 320/5 A 10VA Cl

1.0 CTs, Digital Voltmeter, Ammeter With S/S. -

One (1) No Incomer from Solar PV each comprising of -

One (1) - 32 Amp FP, 25 KA,Thermal magnetic based released MCCB with 3

Nos Phase indicating lamps with control fuse/ MCB, 3 Nos 32/5 A 10VA Cl

1.0 CTs, Digital Voltmeter, Ammeter With S/S. and One set of Solar

Generation Metering unit with required connecting accessories. -

ATS (One Set of 320A 4Pole Motorized Auto transfer switch) comprising

Four (4) - Outgoing Feeders (For 3nos Floor Panel and 1no Spare) each

comprising of -

One (1) - 160A FP, 25KA,MCCB. -

One Set ON/OFF Indicating lamp with control fuse/ MCB. -

Six (6) - Outgoing Feeders (For 1no Fire pump, 1no Water Supply, 2nos

Lift, 1no UPS and 1nos spare) each comprising of -

One (1) - 63A FP, 25KA,MCCB. -

One Set ON/OFF Indicating lamp with control fuse/ MCB. -

Two (2) - Outgoing Feeders (For 1no External Lighting Feeder panel and

1no spare) each comprising of -

One (1) - 32A FP, 25KA,MCCB. -

One Set ON/OFF Indicating lamp with control fuse/ MCB. -

Three(3) - Outgoing Feeders (3nos spare) each comprising of -

One (1) - 63A FP, 10KA,MCB (C-Curve) -

Three (3) - Outgoing Feeder for spare comprising of -

One (1) - 63A DP, 10KA MCB. -

PANEL AS ABOVE Set 1 6,97,541.66 6,97,541.66

15 Floor Panel-GF -

One (1) Incomer comprising of - 160 Amp, 25 KA, FP MCCB , One(1) set of –

160/5A , 15VA , CL 1.0, CT with 3 Nos Phase indicating lamps with control

other accesories.) -

Busbar - 200 Amp, 25KA Cu TP2N busbar suitable for operation at 415 Volt,

50 Hz, 3 Phase supply -

Four (4) - Outgoing Feeders for (3Nos PDB/ ACDB and 1nos spare) each

Comprising of -

One (1) - 63 Amp FP, 10 KA MCB (C-Curve) -

Four (4) - Outgoing Feeders for (2nos LDB and 2nos spare) each

Comprising of -

One (1) - 40 Amp FP, 10 KA MCB (C-Curve) -

Twelve (12) - Outgoing Feeders for (9Nos 1BHK flats and 3nos spare)

each Comprising of -

One (1) - 63 Amp DP, 10 KA MCB (C-Curve) -

PANEL AS ABOVE Set 1 1,43,193.00 1,43,193.00

15 Floor Panel 1st and 2nd floor -

One (1) Incomer comprising of - 160 Amp, 25 KA, FP MCCB , One(1) set of –

160/5A , 15VA , CL 1.0, CT with 3 Nos Phase indicating lamps with control

other accesories.) -

Busbar - 200 Amp, 25KA Cu TP2N busbar suitable for operation at 415 Volt,

50 Hz, 3 Phase supply -

Six (6) - Outgoing Feeders for (4Nos PDB/ ACDB and 2nos spare) each

Comprising of -

One (1) - 63 Amp FP, 10 KA MCB (C-Curve) -

Six (6) - Outgoing Feeders for (4nos LDB and 2nos spare) each

Comprising of -

One (1) - 40 Amp FP, 10 KA MCB (C-Curve) -

Three (3) - Outgoing Feeders for (3nos spare) each Comprising of -

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

One (1) - 63 Amp DP, 10 KA MCB (C-Curve) -

PANEL AS ABOVE Set 2 1,45,135.28 2,90,270.56

15 UPS PANEL(O/G) -

One (1) Incomer comprising of - 63 Amp, 25 KA, FP MCCB , One(1) set of –

63/5A , 15VA , CL 1.0, CT with 3 Nos Phase indicating lamps with control

other accesories.) -

Busbar - 100 Amp, 25KA Cu TP2N busbar suitable for operation at 415 Volt,

50 Hz, 3 Phase supply -

Eight(8) - Outgoing Feeders for (6 Nos UDB and 2nosSpare) each

Comprising of -

One (1) - 32 Amp DP, 10 KA MCB (C-Curve) -

PANEL AS ABOVE Set 1 81,568.68 81,568.68

Supplying and fixing of following mentioned way, three pole/single pole and

neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts

shall be as per IEC 61439-3,integrated door earthing system offering additional

safety to the user,High quality polyurethane Gasket,the box and cover shall be

fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank

16 process and duly powder coated, phosphatized with powder coated finish, on

surface/recess, complete with terminal blocks,with suitable size FR PVC

insulated copper conducter up to terminal blocks, tinned copper busbar, neutral

busbar, earth bar, din bar. as per direction of Engg.-in-Charge.

4 Way(8+(4x3)+(3x4)) Way TPN MCB DD 7 Segment DB Horizontal Type as

per IEC 61439-3 with configuration of incomming I-8 modules,sub incommer-

12 module & out going-12 modules,suitable for Flush mounting and Surface

a) mounting with Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar

& Cable ties for cable management, prefitted masking sheet, IP43-IK09 with

metal door Warranty on DB is 3 years

8Way(8+(4x3)+(8x3)) Way TPN MCB DD 7 Segment DB Horizontal Type as

per IEC 61439-3 with configuration of incomming I-8 modules,sub incommer-

12 module & out going-24 modules,suitable for Flush mounting and Surface

b) mounting with Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar

& Cable ties for cable management, prefitted masking sheet, IP43-IK09 with

metal door Warranty on DB is 3 years

Supplying and fixing following way, horizontal type SPN, sheet steel, MCB

distribution board, 230 V, on surface/ recess, complete with tinned copper bus

bar, neutral bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without MCB/RCCB/Isolator). as per

direction of Engg.-in-Charge. )

Supply and fixing of 12 way DD single pole and neutral sheet steel MCB

distribution board 250V on surface/recess complete with tinned copper bus bar,

a) neutral bus bar, earth bar, din bar, detachable gland plate, interconnections,

phosphatized and powder painted including earthing etc. as required (but with

out MCB/ RCCB/ Isolator) Each 15 2,321.06 34,815.90

Supplying and fixing following rating MCBs/ Isolator in the existing MCB DB

18 complete with connections,testing and commissioning etc. as required. as per

direction of Engg.-in-Charge.) -

Supplying and fixing 63Amps 4P 415 volts MCB in the existing MCB DB in

a) the existing MCB DB complete with connections as per direction of Engg.-in-

Charge. Warranty on MCB is 3 years. Each 11 3,499.88 38,498.68

Supplying and fixing 40Amps 4P 415 volts MCB in the existing MCB DB in

a) the existing MCB DB complete with connections as per direction of Engg.-in-

Charge. Warranty on MCB is 3 years. Each 8 3,499.88 27,999.04

Supplying and fixing 63 amps rating, 240 volts, C series,10KA breaking

d) capacity, Double poles MCB of in the existing MCB DB complete with

connections as per direction of Engg.-in-Charge. Each 9 1,799.50 16,195.50

Supplying and fixing 32 amps rating, 240 volts, C series,10KA breaking

d) capacity, Double poles MCB of in the existing MCB DB complete with

connections as per direction of Engg.-in-Charge. Each 6 1,799.50 10,797.00

Supplying and fixing 6-32 Amps rating, C series,10KA breaking capacity,SP,

230 volts, MCB in the existing MCB DB complete with connections, testing

and commissioning etc. as required as per direction of Engg.-in-Charge.

Supplying and fixing following rating RCCB/ELCB in the existing MCB DB

19 complete with connections,testing and commissioning etc. as required.

Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA in the existing MCB

a) DB in the existing MCB DB complete with connections as per direction of

Engg.-in-Charge. Each 11 6,182.02 68,002.22

Supplying and fixing 40Amps 4P 415 volts RCCB 30 mA in the existing MCB

a) DB in the existing MCB DB complete with connections as per direction of

Engg.-in-Charge. Each 12 6,182.02 74,184.24

D. Cables, Cable Laying & Termination -

Supplying & Testing of 1.1 KV grade Aluminium XLPE Armoured power

cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply. -

a) 4C X16 sqmm Meter 230 400.02 92,004.60

b) 3.5C X70 sqmm Meter 60 1,087.02 65,220.96

c) 3.5C X150sqmm Meter 200 2,014.61 4,02,922.80

Supplying & Testing of 1.1 KV grade Cu XLPE Un Armoured (Flexible) power

21 cable of following size suitable for 415 Volt, 3Ph, 50 c/s supply.

a) 1C X 16 sqmm Mtr 30 602.98 18,089.40

CABLE LAYING -

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of

1.1KV grade of following size direct in ground including excavation (75

cm),sand cushioning,protective covering and refilling the trench etc as required.

a) Upto 25 sq. mm Mtr 10 185.26 1,852.60

b) Above 25 sq. mm and upto 120 sq. mm Mtr 10 210.04 2,100.40

c) Above 120 sq. mm and upto 400 sq. mm Mtr 180 236.00 42,480.00

Laying of One No. PVC insulated and PVC sheathed/ XLPE power cable of 1.1

KV grade of following size in the existing RCC/ HUME/ MASONERY

TRENCH/ HDPE Pipe/ Metal Pipe/ On Wall Surface (Clamped with saddle/

PVC & UPVC Pipe)/ CableTray as required. -

a) Upto25 sq. mm Mtr 250 123.90 30,975.00

b) Above 25 sq. mm and upto 120 sq. mm Mtr 50 188.80 9,440.00

c) Above 120 sq. mm and upto 400 sq. mm Mtr 20 192.34 3,846.80

24 TERMINATION OF CABLES -

Supply & Making end Termination with brass compression gland and

Cu/aluminium lugs for PVC insulated and PVC sheathed cable of 1.1 kv grade

(without cost of Cable) -

a) 4C X 16 sq. mm Each 12 273.76 3,285.12

b) 3.5C X 70 sq. mm Each 6 555.78 3,334.68

c) 3.5C X 150 sq. mm Each 8 706.82 5,654.56

Providing,fixing and laying of fallowing dia HDPE pipe (medium class) in

ground complete with fitting incl. trenching (75 mm depth) and refilling as per

direction of Engg.-in-Charge. Neccessary test report & Warrnaty certificate to

25 be submitted to the department for genuinity of product & to avail free after

sales service within warranty period for acceptance of materials.

a) 200 mm dia (for Road crossing) Mtr 30 1,007.72 30,231.60

26 CABLE TRAY -

Supply, fabricating and installing following size of hot dip G.I. perforated type

cables trays including suspending from ceiling with angle, rods connection

pieces, horizontal vertical bends, reducers, tees, cross members,G.I. nut bolts,

G.I. washers, fasteners etc. complete as required per specifications & approved

by the Engineer Incharge. -

Supplying,fixing of perforated cable trays with horizental & vertical

bends,reducers ,tees,crossover,brakets & other accessories ar requited

confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion

a) protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x

100mm(W) .The Load bearing capacity of the Cable Trays should be

minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications

as required as per direction of Engg.-in-Charge. Mtr 150 670.24 1,00,536.00

Supplying,fixing of perforated cable trays with horizental & vertical

bends,reducers ,tees,crossover,brakets & other accessories ar requited

confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion

b) protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x

300mm(W).The Load bearing capacity of the Cable Trays should be minimum

of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as

required as per direction of Engg.-in-Charge. Mtr 150 814.20 1,22,130.00

Supplying,fixing of perforated cable trays with horizental & vertical

bends,reducers ,tees,crossover,brakets & other accessories ar requited

confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion

c) protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x

400mm(W). The Load bearing capacity of the Cable Trays should be minimum

of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as

required as per direction of Engg.-in-Charge. Mtr 150 1,687.40 2,53,110.00

Supplying,fixing of FLOOR RACE WAY WITH JUNCTION box

GALVANIZED(GC) type AS PER EN-ISO-1461 , with internal dimensions

d) of size 38mm(H) x 225mm(W). (With all accessories, bend, cover, supporter)

with required sized junction box, cover connector as required as per direction

of Engg.-in-Charge. Mtr 50 2,101.58 1,05,079.00

Supply ,installation ,testing & commissioning of 20KVA Parallel UPS

SYSTEM WITH IGBT based inverter system, true online double conversion

system, inbuilt isolation transformer & automatic phase sicuency corrector of

3ph in put to 3 ph output,415V, with built in BMS with battery back up up to

27 30 minutes with MS Rack for battery Housing, DC cable 7 Mtr with SFU and

links for installation (Battery required: 12V) protection for fault by OL, UV, EF,

GF, OC, Ph. as per direction of Engg.-in-Charge.

F. Earthing -

Supplying, installation, testing & commissioning Of Earthing with copper earth

plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and

providing masonary with cover plate having loccking arrangement and watering

pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-

Charge. The entire earthing system should be Replacement Warranty will be 2

years Set 3 21,309.62 63,928.86

Supplying,installation,testing & commissioning of materials and installation of

GI earth plate 600mm x 600mm x 6mm thick ISI marked with G. I. nut bolts

& washers including cost of burnt wood charcoal, salt, foreign soil, water

pouring arrangements, brick masonary enclosure on top with removable RCC

29 cover complete with labour for excavation of pit in all kinds of soil & rock as

required and as per direction of Engineer-in-charge.The entire earthing system

should be Replacement Warranty will be 2 years

Providing and fixing 25mm x 5 mm copper strip on surface or in recess for

30 connections etc. as required as per direction of Engg.-in-Charge. Main LT

ROOM dg panel earthing Mtr 50 1,320.42 66,021.00

Providing and fixing 50mm x 6 mm GI strip on surface or in recess for

31 connections etc. as required as per direction of Engg.-in-Charge. 2 runs from

main LT room to electrical shaft upto 3rd floor Mtr 100 377.60 37,760.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

Providing and fixing 25mm x 5 mm GI strip on surface or in recess for

32 connections etc. as required as per direction of Engg.-in-Charge. Tapping from

50mm x 6 mm bus bar to all sub panel Mtr 200 179.36 35,872.00

G. Lightning Arrestor -

Lightning Protection :- Supply of 8 mm Aluminum Round Conductor.Tested as

33 per IEC 62561. as per direction of engineer in charge.

Supply of Roof conductor holder for parapet- Polyamide Conductor

holder:With M8 female thread or diameter 7mm, M8 Screw to connect the

34 conductor holder.Weather and temperature resistant from -35 to +90 degree

Celsius tested. Conductor holder @ 1 meter distance.Tested as per IEC 62561.

as per direction of engineer in charge. No 320 60.18 19,257.60

Supply of Polyamide roof cable holder for flat roof: DIN 48829 Form B1.

Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve

from polyethylene, black @ 1 meter distance. Tested as per IEC 62561.

Supply of Connector: For T cross and parallel connectors. Quick installation

36 using hexagonal bolt M10X30 high-grade hot dip galvanised. Tested as per IEC

62561.(2nos/ expansion piece). No 20 239.54 4,790.80

Supply of 1 mtr vertical air terminal with mounting accessories on the flat

surface to meet the requirements of IS/IEC 62305. Tested for Electrical ,

mechanical and chemical as per IEC 62561. Tested for 100kA lightning

current. No 6 1,373.52 8,241.12

Supply of Vertical air terminal with accessories:Providing of Air terminals as

per IS-IEC -62305 part-3 Nominal size Ø10/16 mm aluminium rod: 2 Mtr Air

terminal: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high

wind load. Tested as per IEC 62561. No 4 1,950.54 7,802.16

Supply for Providing of Stand for Fang Fix system 16 kg with base and clamp

39 ,made up of frost resistant concrete and clamp tested upto 100KA lightning

current . No 4 2,902.80 11,611.20

Supply for Providing of Stand for Fang Fix system 16 kg made up of frost

resistant concrete. No 6 1,125.72 6,754.32

Supply of Test Joint (Folding Clamp) suitable to connect 8mm round conductor

41 and max by 30x3 mm GI strip as specified in drawing and directed by Engineer.

Tested for 100kA lightning current. No 8 448.40 3,587.20

Supply of IP 66 Poly Propylene Junction Box. Installation at 1Mtr Height, For

Test Joint .Internal dimensions: 100x100x48 mm. No 8 326.86 2,614.88

Supply of Galvanised Steel Flat 30X3 mm thickness from earth electrode

43 directly in ground as required. Flat conductor Hot Dipped Galvanized. Tested

as per IEC 62561. Mtr 110 318.60 35,046.00

Supply for Providing of Cross connector for Flat: Suitable for 30mm

44 Galvanised steel strip. Installed with 4 nos of hexagonal plate. Tested for

100kA lightning current. No 8 297.36 2,378.88

Supply of flat conductor holder- Fit: FL 30, With mounting hole 6.2 x 22 mm,

With 2 cylinder bolts M6 x 16 and over-piece from hot-dip galvanised steel,

Bottom section from polyamide, black. Tested as per IEC 62561.

Supply for Providing of Plastic Corrosion Protection strip: Approx 1.1 mm

46 thick. Width 50mm. Made of petrolatum- coated chemical fibre fabric.

Supply of UL Listed maintenance free ,Low carbon copper coated earth rod of

47 3 metre electrode having diameter of 17.2 mm with copper coating thickness of

250micron tested as per IEC 62561-2. No 8 4,935.94 39,487.52

Supply of universal clamp made of SS to connect rod with flat conductor.

Supply of Earth conductivity enhancing mineral compound shall be of 25kg/ pit

tested as per IEC 62561-7,TCLP tested. No 16 3,348.84 53,581.44

Supply of The above arrangements shall be provided with Heavy duty earth

50 champer of 5000kg load bearing capacity to ensure the safety of earthing

system. No 8 2,559.42 20,475.36

Installation of The above arrangements including all accessories as per

Direction of Engg. In charge. Job 1 41,300.00 41,300.00

Fire Fighting work -

Fire Pump , Down Comer System And Other Accessories -

Supplying , installation , testing and commissioning of electric driven terrace

pump suitable for automatic operation and consisting of following , complete in

all respects , as required : ( Terrace Pump ). Horizontal type , multistage ,

centrifugal , split casing pump of cast iron body & bronze impeller with

stainless steel shaft , mechanical confirming to IS : 1520. Suitable HP squirell

cage induction motor TEFC type suitable for operation on 415 volts , 3 phase ,

1 50 Hz , AC supply with IP55 class of protection for enclosure , horizontal foot -

mounted type with Class - ' F insulation , conforming to IS - 325 . M.S.

fabricated common base plate , coupling , coupling guard , foundation bolts etc.

as required . Suitable cement concrete foundation duly plastered and with anti

vibration pads .

Flow rate : 450 LPM -

Pumping Head : 35 M -

Motor KW : 5.5 KW (Approx) or As per manufacturer recommendation

Pump as above Set 1 95,243.70 95,243.70

MCC Panel -

Supply, Installation, Testing and Commissioning of Wall mounted sectionalised,

front operated top entry dust and vermin proof M.V.Panel Boards suitable for

operation at 415V, 3 phase, 4 wire, 50Hz distribution system fabricated out of

2.0 mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust

2 and vermin proof, powder coated of approved shade after 7 tank treatment -

process, cable alley, insulated busbar with heat shrienkable PVC sleeve, base

channel, complete with all accessories including interconnections, proper

earthing etc as required.

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

One (1)- 63 Amp, 10 KA,4P MCB with 3 Nos Phase indicating lamps with

for motor duty.

One (1) - DOL with O/L and Single Phasing Preventor suitable for 10 HP

motor(minimum). ON/OFF indication lamps, Auto manual switch and ON/OFF -

push button.

One (1) - Set of Auxilliary relay for automatic operation through pressure

switch.

Panel As Above Set 1 37,398.92 37,398.92

Supply, Laying, Connecting, Testing & Commissioning of following size of 1.1

kv grade multicore aluminium conductor XLPE insulated PVC sheathed

armoured cable as per IS: 7098:1988 (Part-I) with upto date amendments etc.

3 complete as required. Tagging on both the ends will be done with aluminium

tags etc. complete as required.(Make:- Polycab, Havells or

Equivalent).(Quantities as per site requirement shall be finally estimated &

executed accordingly with prior approval.) -

4 core x 16 sqmm Al. Ar. XLPE Cable (Main panel- MCC Panel - Terrace

Pump Set) Mtr 30 551.06 16,531.80

Supplying and making indoor end termination with brass compression gland

(Heavy duty) and suitable copper / aluminium lugs for following size of XLPE

insulated PVC sheathed copper/ aluminium conductor armoured/ unarmoured

cable of 1.1 KV grade including cost of ferrules, cable sockets, insulation tape

& other accessories etc. complete as required.

a) 4 core x 16 sqmm Al. Lugs Nos 4 355.18 1,420.72

Providing and Fixing following size of GI strips/ GI wire etc. on surface or in

recess for connections, including GI clamps etc. as required. -

25 mm X 5 mm dia GI strip on wall/surface or in recess for connection etc. as

required. Mtr 30 179.36 5,380.80

Supply and installing of following size of perforated hot dip G.I. cable trays

including horizontal and vertical bends, reducers, tees, cross members and

other accessories as required and duly suspended from the ceiling with full

threaded GI suspenders, along the wall with supports and including painting

etc. as required & approved by thye Engineer Incharge.

a) 100 mm width x 40 mm depth x 1.6 mm thickness Mtr 20 619.50 12,390.00

Supplying and fixing air vessel made of 200 mm dia, 8 mm thick MS sheet,

1200 mm in height with air release valve on top and flanged connection to riser,

7 drain arrangement with 25 mm dia gun metal wheel valve with required

accessories, pressure gauge and paintingwith synthetic enamel paint of

approved shade as required. Set 1 21,245.90 21,245.90

Providing, laying, testing & commissioning of 'C' class heavy duty MS Pipe

conforming to lS 3589 and 1239 including fittings like elbows, tees, flanges,

tapers, nuts bolts, gaskets etc.,fixing the pipe on the wall/ceiling with proper

core cutting & filling with treatment, providing proper supports, using clamps

and painting with two or more coats of synthetic enamel paint of required shade

complete as required. -

a) 100 mm dia Mtr 200 2,823.74 5,64,748.00

b) 80 mm dia Mtr 40 2,010.72 80,428.80

c) 25mm dia Mtr 10 765.82 7,658.20

Providing, fixing, testing and commissioning of following size manually

operated hand lever type cast iron double flanged slim seal wafer type Butterfly

valves with EPDM iron disc as per IS-13095 having pressure ratting PN -1.60

9 including fixing the same with supply of required jointing materials like rubber

insertion, MS nuts & bolts, paint etc. and testing the joints with required water

pressure etc. all complete as per specification & direction of E.I.C.

a) 100 mm dia Nos 5 6,689.42 33,447.10

b) 80 mm dia Nos 2 4,958.36 9,916.72

Providing, fitting & fixing of following size cast iron double flanged type dual

plate Non return Valve as per IS- 5312 (Part 1): 2004 with ISI mark of pressure

ratting PN-1.60 including fixing the same with supply of required jointing

materials like flanges, rubber insertion, MS nuts & bolts, paint etc. and testing

the joints with required water pressure etc. all complete as per specification &

direction of Engineer-in-charge. -

a) 100 mm dia Nos 1 11,266.64 11,266.64

Supply,Installation,Testing & Commissioning of stainless steel strainer

11 fabricated out of 1.6 mm thick stainless steel sheet Y Stainer with 3 mm dia

hloes with stainless steel flange as required. -

a) 100mm NB Nos 1 6,683.52 6,683.52

Supply,Installation,Testing & Commissioning of Pressure gauge of 0-16

12 Kgf/sq.cm. range with cut-off bronze ball valves of suitable size with all -

accessories as per direction of Engineer-in-charge.

a) 100 mm dial (4") 0-16 kgs range Nos 7 1,864.40 13,050.80

Supply,Installation,Testing & Commissioning of Pressure Switch with cut-off

bronze ball valves with integral strainer & flare nut (mixed ends) of suitable

size with all accessories as per direction of Engineer-in-charge.

Supply, Installation, Testing and Commissioning of Gun metal Ball

Valve.Including all necessary fittings as required. -

a) 25 mm dia Nos 7 2,134.62 14,942.34

Supply, Installation, Testing and Commissioning of Gun Metal Air Release

Valve with necessary fittings. -

a) 25 mm (For Riser) No 2 3,304.00 6,608.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

Supply, installation, testing and commissioning of First- Aid Hose Reel

equipment with M.S. construction spray painted in post office red, conforming

to IS:884 with up to date amendments, complete with the following as required.

(a) 30 m. long, 25 mm dia. water hose thermoplastic

16 (Textile reinforced) Type-2 as per IS:12585.

(b) 25 mm dia SS type globe valve & nozzle

(c) Drum and swinging type fixing brackets on the wall.

(d) Connections from riser with 25 mm dia. SS metal ball valve.

FIRE EXTINGUISHER SYSTEMS: -

Supply, installation, testing and commissioning of Carbon Dioxide (Co2) type

Fire Extinguisher confirm to IS:15683, with ISI marked / TAC approved fitted

with required accessories including wall suspension brackets.

a) 4.5 kg capacity Nos 18 9,086.00 1,63,548.00

Supply, installation, testing and commissioning of ABC type Fire Extinguisher

18 confirm to IS:15683, with ISI marked / TAC approved fitted with required

accessories including wall suspension brackets. -

a) 6.0 kgs capacity Nos 18 3,851.52 69,327.36

Supply and fixing of Fire Bucket with Stand heavy duty bottam will be round

19 type Red painted two in one with M.S Angle fabricated stand completed.

a) 9 Ltrs capacity. Set 2 4,317.62 8,635.24

ELV Work -

A CCTV -

Supply, Installation, Testing & Commissioning of 5MP IP Network TDN Low-

Light IR Fixed Lens Dome/Bullet Camera, 1/2.8" CMOS or better, 5MP (2592

x 1944) @ 25fps or better, four stream at various resolution & Frame Rates,

Min. Illumination required 0.005 lux (color), 0 Lux IR On, 3 IR LEDs, Smart

IR with upto 50m(bullet)/40m(dome) IR distance, Auto ICR (Infrared Cut

Filter) 130dB True WDR, S/N Ratio 55db, Shutter Speed 1/3 - 1/100,000;

Adavance Video Compression technology such as H.265 HEVC/ H.264 /

MJPEG , Fixed Lens 2.8mm(Dome)/3.6mm(bullet), Field of View FoV

H:96.5°, V:73.8°(dome)/ Field of View FoV H:94.1°, V:71°(bullet), BLC,

1 HLC, WDR, 2D/3DNR, White Balance - Auto/Manual/Day/Night/timing,

Minimum Edge Intelligence Video Analytics : Video Motion Detection,

Tampering, Loitering, Intrusion, & People Counting, 5 Privacy Mask, 6 Region

Of Intreset, Defog, HTTPS, IP Filter, TLS1.2, AES-128/256, SSH/Telnet

closed, Stream Encryption, 2TB SD card support, PoE (802.3 af) and 12V

DC, IP 66/67 & IK10 Vandal proof with Die Cast Aluminium Housing, Having

Operating temp range : –30°C to 60° C. Certifications: ONVIF Profile S/G/T

compliant,, CE (EN 50130-4), FCC Part 15, EN 55032 & RoHS

(EN63000),NDA,STQC compliant.

Supply , Installation, testing , commissioning of 64 Channel NVR with 8

SATA; 384 Mbps incoming bandwidth, Up to 8 Megapixels Resolution Display

and Recording, H.265 video compression technology with real time encoding,

Full function CMS (Central monitoring software) supported, Two way audio

supported, Dual streaming technology to encode recording stream and network

2 stream separately, Supports remote monitoring on Mobile Client (Android,

IOS), TCP / IP, PPPoE, DHCP, DNS, DDNS, UPnP, NTP, SMTP, Time/ Date,

Alarm, Motion Detection & Exact Search (accurate to second), Record

Snapshot, FTP, Preset Calling, Email notification supported, Manual/ Alarm/

Motion Detection/ Continuous, CE, FCC, RoHS).

3 Supply, Installation,Testing & Commisioning of Surveliance 8 TB HDD. Nos 4 22,840.08 91,360.32

Supply,Installation,Testing & Commissioning of 55" UHD IPS Commercial

Digital Display, Brightness (330 nits or higher), Dynamic Contrast Ratio

(Dynamic MCI (Hz)):1000000:1), 1000000:1, Static (Panel) Contrast Ratio-

1200:1, Response Time (G to G)-8 ms, Refresh Rate.-60 Hz, Life span (hrs)-

4 30,000, Speaker (Sound Output):10W + 10W, Speaker System: 2.0 ch, DVB-

T2/C Broadcasting System, Commercial Smart UX, webOS version (webOS

6.0), BIS Certification with 3 years onsite warrenty.

LAN SYSTEM -

SITC of Cat6 I/O with Dual Face plate: The Outlet shall meet or exceed

requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The

information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return

loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The

information outlet connector shall be of gold/nickel, thickness of gold > 0.8 μm.

The connectors shall be compatible as per IEEE 802.3af standard for POE

application. The PVC material of Face plate should complie ABS /UL94-V-O

certified. Nos 24 1,230.74 29,537.76

Supply,Installation,Testing & Commissioning of Cat 6, 24-port loaded, 1U

Modular Jack Panel Should accommodate Cat6 with Rear Cable Management

and Front removable Tooless Information outlet. Should have easy clip

5 management with labels and clear label covers, Made with of Dicast

Aluminium Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24

ports with color code front panel with patch cord locking.

Supply and installation of Cat6 UTP 24 AWG Patch Cord Patch cord: cat 6

UTP Patch Cords are Factory Tested for Better Quality and Suitable for the

High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-

C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-

6 Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During

Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100%

Factory Tested , Transparent Boot Cable Assemblies.

a) 1mtr Lenghth Nos 144 384.68 55,393.92

b) 2mtrs Length Nos 50 454.30 22,715.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

Supply,Installation,Testing & Commissioning of 24x 10/100/1000 Ethernet L2

Fully Managed Switch with 370W PoE budget, 4x 1G SFP uplinks. Switch

7 should support 802.1Q VLAN, MSTP, L2 & L3 . All hardware should supplied

with necessary mounting brackets and IN power cord with 3 years warranty.

SITC of 24U 600/650D UL Listed Floor mount Rack with Front perforated

door with 3 point lock, Rear mesh door with Cam lock and 3inch Castor Wheel

included with 2 no 6/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw

Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with

8 Power Cable 2.5 sq.mm 3 meter Length, 4nos 1U Metal Cable manager with

Plastic cable loops, 2nos CFM FAN set, 1no Monitor Tray - Ventilation - 495W

- 375D and H/W screw920sets).

SITC of 9U/500D Wall Mount Rack with Accessories: The rack size should be

600W x 500D, Front frame integrated with top, bottom, front and two side

panels for better rigidity and strength, Front Glass Door with Lock loaded,

Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC

EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008 including Power Distribution

9 Unit (06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable

/ 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable

2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos

1U Metal Cable manager with Plastic cable loops and H/W screw.

CABLE -

Supply,Installation,Testing & Commissioning of 4 pair Cat6 U/UTP Cable in

the existing surface/ recessed steel/ PVC conduit as required: The 4 pair

Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of

ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by

internal PE Cross Separator. Full separator. Half shall not be accepted. Rip

Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should

10 support operating temperature from -20° to +70°C Cable support Conductor

Resistance ≤ 9.38 Ω/100m Max., Cable support Delay Skew: < 45 ns/100m,

Operating Voltage: 72V , Impedance: 100 ± 15 Ω @100 MHz. and Propagation

Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel

performance up to 700 MHz , RoHS Compliant.

Conduits -

Supply, delivery and laying of following sizes of 2mm thick PVC Conduit

concealed in wall/ column/ roof slab of the building alongwith other accessories

11 and 18 swg GI wire complete for Electrical Wiring/Telephone / TV & Data

cable wiring as required and as per direction of Engineer-in-charge.

a) 20mm dia Mtr 3000 148.68 4,46,040.00

b) 25mm dia Mtr 500 151.04 75,520.00

Solar PV Work -

Solar PV-10KWP 0 0.00 -

Supply Installation Testing and Commissioning of on grid BIPV Solar

Photovoltaic Power Plant conforming to MNRE specifications as amended,

consisting of Mono / Poly Crystalline silicon solar cells, net metering facility

,necessary protections, earthing, mounted on Aluminium / GI structure of

suitable strength with following components a complete as arequired:

a) Solar Photovoltaic Module of capacity 330Wp or above, manufactured in

India, conforming to IS14286 / IEC61215, IS/IEC61730-Part-1, IS/IEC61730-

Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than

0 16.5%. PV modules used in solar power plants /systems must be warranted for 0 0.00 -

their output peak watt capacity, which should not be less than 90% at the end of

10 years and 80% at the end of 25 years.

b) Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and

400 V AC, three phase , 4 wire, 50Hz +/- 2.5Hz, output voltage suitable to

generate AC Power with efficiency not less than 97%, total harmonic distortion

less than 3% and suitable for ambient temperature from 0 to 50 degree

Celcious. The PCU shall adjust the voltage and frequency level to suit the Grid

Voltage,frequency.

0 c) Data Monitoring System complete with accessories. 0 0.00 -

0 e) Lightning and surge voltage protection. 0 0.00 -

f) Connections & Interconnections by supplying & fixing required size XLPE

insulated copper conductor 1.1 kV grade armoured power and control cables

between solar modules, main power cable to grid supply PCU unit along with

supplying & fixing of necessary channel/ conduit lugs and other accessories etc.

0 asrequired. with all required accessories as required as per the direction of -

Engg-in-charge. Reputed make & model A catogory, ISI marked as approved .

The entire SOLAR system should be Replacement Warranty will be 5 years

Solar PV system as above KW 10.00 89,090.00 8,90,900.00

AV System Work -

28 STUDENT SMART CLASS ROOM (2NOS) -

Supply of Column loudspeaker 30W, metal,Sound pressure level at rated power

/1 W (1 kHz, 1 m)-105 / 92 Db SPL,Effective frequency range (-10 dB) 153 Hz

‒ 17.7 kHz,Horizontal opening angle at 1 kHz / 4 kHz (-6 dB)-198°/

1 130°,Vertical opening angle at 1 kHz / 4 kHz (-6 dB)-62°/ 18° ,Rated input

voltage 100 V,Rated impedance, Full power 333 Ω, Half power 667 Ω.

Supply of Power amplifier, 480W,Input Voltage 230 VAC ±10% at 50/60 Hz

or 24 VDC,Inrush Current 19 A at 230 VAC, 30 A at 24 VDC,Performance-

Rated Output (RMS) 480 W,Power reduction on backup power -1

2 dB,Frequency response 50 Hz to 20 kHz (+1 / -3 dB at -10 dB ref. rated

output),Distortion <1% at rated output, 1 kHz,S/N (flat at,max volume) > 90

dB,Power consumption,Max power consumption 1600 VA.

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

Supply of 10-Channel Mixing Console,Max. 4 Mic / 10 Line Inputs (4 mono +

3 stereo),1 Stereo Bus,1 AUX (incl. FX),"D-PRE" mic preamps with an

3 inverted Darlington circuit,1-Knob compressors,High-grade effects: SPX with

24 programs,PAD switch on mono inputs,+48V phantom power.

Supply of Wireless Handheld dynamic cardioid microphone with rack mount

receciver,Mic frequiency-15hz – 15khz,Operating Range-300 ft,Transmitter RF

Output Power-10 mW,Dynamic Range-100 dB,THD-0.5%,Gain Adjustment

4 Range-10 dB,Up to 12 compatible systems per frequency band, internal antenna

connector. Nos. 2 73,514.00 1,47,028.00

Supply of Wireless Headset dynamic cardioid microphone with rack mount

receciver,Mic frequiency-40 Hz to 20,000 Hz,Available Frequencies-524–865

MHz,Operating Range-300 ft,Transmitter RF Output Power-10 mW,Dynamic

5 Range-100 dB,THD-0.5%,Gain Adjustment Range-10 dB,Up to 12 compatible

systems per frequency band, internal antenna diversity, One-touch QuickScan

Supply of Multi‑Pattern Desktop Microphone 18” (45.7 cm) with inline

preamp,Cardioid polar pattern with tailored response for speech,Dual-section

gooseneck enables ease of positioning and placement options with Desktop

base mounts for gooseneck mics. No. 2 50,268.00 1,00,536.00

Supply of Pop-up Box With Easy access to connectors, Durable pneumatic

movement and mechanical latching mechanism,Two Universal Power

7 Socket,One USB-A for Charging,Two CAT6A RJ45 Network Port, One HDMI

Female Port,One USB-C Female Port,One USB-A Female Port for USB

peripheral connectivity,One 3.5mm Audio Jack. No. 2 32,568.00 65,136.00

Supply of 17U 600/650D UL Listed Floor mount Rack with Front perforated

door with 3 point lock, Rear mesh door with Cam lock and 3inch Castor Wheel

included with 2 no 6/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw

Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with

8 Power Cable 2.5 sq.mm 3 meter Length, 4nos 1U Metal Cable manager with

Plastic cable loops, 2nos CFM FAN set, 1no Monitor Tray - Ventilation - 495W

- 375D and H/W screw 920 sets).

Supply of EDLA CERTIFIED 86" 4K IR TOUCH PANELType Technology

Backlit D-LED (IPS Panel),Brightness 450 cd/m²,Contrast Ratio

1,200:1,Dynamic Contrast Ratio 30,000:1

Native Resolution 4K Ultra-HD (3840 x 2160),Viewing Angle (H/V)

178°/178°,Aspect Ratio 16:09,Refresh Rate (Hz) 60 Hz,Response Time 8ms

(Typ),Display Color (BIT) 1.07 Billion (10-bit),Installation Orientation

Landscape,Technology Infrared Touch,Touch Points 40 Points,Finger Accuracy

±1mm,Passive Pen Accuracy ±1mm,Touch Response Time <=5ms,Touch

9 Resolution 32,768 x32,768,Surface Protection Anti-Glare Thick Toughened

Glass,Touch Tools Finger, Stylus, Glove,,Opaque,Objects,System Version

Android™ v14.0,CPU Octa-Core,GPU Mali™ G52,Ram 8GB DDR4,Internal

Storage 128 GB (eMMC Flash),Input – Display HDMI v2.0 (x2) Side,HDMI

v2.0 (x2) Front,Input – Audio Mic(3.5)(x1),Output – Display HDMI v2.0 (x1)

Side,Output – Audio Audio-Out (3.5mm) (x1), SPDIF-Out (x1),Internet LAN

(RJ45) (x2) (10/100Mbps),Control RS232-In (x1),Wireless – Wifi

IEEE802.11ax (2.4GHz/5GHz),Wireless – Bluetooth BT 5.2.

Supply, Installation, Testing & Commissioning of Digital Podium with 21.5"

Interactive Display having Motorized Panel Facility,Monitor Highly sensitive

Interactive Touch Monitor and mechanism to make the panel stable to avoid

any kind of shake while wiring. Screen Type Color LED; Scratch resistant,

antiglare & overlay tempered vandal resistant glass (3mm thickness),Size 21.5”

(54.61 cm),Resolution 1920 x 1080 (Full HD),Aspect Ratio 16:9/

16:10,Response Time 8 ms,Brightness 250 cd/m2,Lamp Life Time 20,000 Hrs,

10 Contrast Ratio 1000:1, Computer Interface USB x 1, VGA x 1, DVI x 1,HDMI

x 1,Interactive Resolultion 4000 Lpi (lines per inch),Viewing Area 477mm x

268mm (H/V), 22 inch,Reading Accuracy ±0.5 mm (center),Tracking Speed

200 points per second,Pen Pressure sensitivity 2048 Levels,Viewing Angles

160(H) ; 160(V),Touch Finger and Stylus,Ports HDMI in x 1, VGA in X 1,DVI

- I in X 1, with gooseneck microphone facility, USB 2.0 A Type for

Touch,Power 12V(DC) 3.5 Amp. Make: Peoplelink/ Globus/ UNI

Supply of Video Conferencing 4K AI Auto-Tracking 30x Zoom PTZ

Camera,HDMI, Ethernet, 3G-SDI, USB output,Sensor-1/1.8" 8.48M,Video

Format-2160p : 60 / 50,2160p : 30 / 25,1080p : 60 / 50 / 30 / 25 ,720p : 60 / 50

/ 30 / 25 ,Digital Zoom-8x ,Horizontal Viewing Angle-59.2°,Vertical Viewing

Angle-33.3°,Diagonal Viewing Angle-67.9°,Aperture-F1.6 ~ F5.4,Focal Length-

7.1 ~ 213 mm,Shutter Speed-1/25 ~ 1/10,000 sec,Minimum Object Distance-

Tele:1.5m Wide:1m,Video S/N Ratio> 50dB,Minimum Illumination-0.5Lux

(F1.6, AGC ON),Focus System-Auto, manual,Gain Control-Auto,

manual,White Balance-Auto, manual,Exposure Control-Auto,

11 manual,WDR,3D NR,Image Flip,PIP,Auto Tracking,Auto Framing,IP

Compression-H.264 / HEVC(H.265),USB Output-2160p30,USB Compression-

H.265(HEVC) / H.264 / MJPEG /YUV2 / NV12,IP Protocol-RTSP / RTMP /

RTMPS / SRT / Dante Ready,PoE,PoE+ (IEEE802.3at),Audio Input-Line

In,Audio Output-Ethernet / USB / HDMI / SDI / Dante Ready,Audio

Compression Format-AAC / PCM,Interface-RS-232 / Ethernet / USB /

Remote. Makes: Lumens/ Sony/ Pelco

Supply of HDMI Cable with moulded HDMI connectors at both endes for HD

Audio and Video. Set 2 14,160.00 28,320.00

13 Supply of 2 Core Loudspeaker Cable with PVC Conduit. Mtr 400 171.10 68,440.00

14 Installation testing & Commissioning of the System. Job 2 88,500.00 1,77,000.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

Supply and installation of 6 ft x 4 ft Magnetic board of aluminum frame and

15 can be mounted in landscape as well as portrait oriented on well with the help

of built in hanging clip. Nos. 4 12,744.00 50,976.00

Audio system for Multipurpose hall - -

Supply of pre-polarized condenser gooseneck microphone with overall length

of 450mm or better, with XLR3M-type connector, clearly visible LED ring

shall offer radio frequency interference (RFI) shielding against intermodulation

from wireless equipment or devices, cardioid microphone capsule with uniform

120° angle of acceptance (-3dB) or better, frequency response of 50 Hz to

1 20,000 Hz or better and sound input levels handling capability of minimum 130

dBspl or better, nominal equivalent noise level of 26 Dba or better and output

shall be low impedance balanced (<100 ohms) with current consumption shall

be 3 mA or better.

Supply of table stand with Microphone modes Toggle on / off, Push to mute,

Push to talk, permanent on for connecting and operating XLR gooseneck

2 microphones with XLR-5F microphone input and an XLR-3M microphone

output operating on 48 V phantom power and current consumption of 3.7 mA

or better. Nos 6 31,506.00 1,89,036.00

Supply of Digital wireless handheld Microphone with UHF transmission greatly

enhances range, reliability and scalability of 56 MHz Bandwidth will allow for

integration setup 134 dB or more transmitter dynamic range Lithium Ion battery

3 pack delivers up to 10 hours of operation (up to 6 hours of operation with AA

batteries) Transducer principle dynamic with Pick-up pattern cardioid, Sound

pressure level 154 dB SPL, Transmit power : 10 mW.

Supply of Digital Signal Processor with Full rack 19” 1RU processor

sampling rates. Integrated license-activated AEC. Dual core processing 40-bit

floating DSP .Front panel OLED display with jog wheel. Rear panel includes an

Ethernet module with RJ45 connector and internal power supply connection

with built-in MOD-Dante-ETH module already pre-installed into the Dante

4 mainframe to provide 64x64 I/O channels of Dante network audio. Dual RJ45

Dante and single RJ45 Ethernet connectors.12ch Mic/Line input with

digital converters.8ch Line output. 32-bit digital to analog converters. 2ch input

+ 2ch output USB audio.Software license activated AEC. 8ch of AEC @

250ms delay / 16ch @ 100ms.

Supply of 2-way Cabinet Loudspeaker, LF Driver 5.25” & HF Driver 1" Max

Power Handling 100W @ 8 Ohms ; Multiple 100V Taps : 40W/20W/10W;

Frequency range 55Hz – 20Khz or better ; Sensitivity 87 dB or better and Max

5 SPL 104 dB or better; Coverage of 100° x 100° (H X V) or better; IP40 Rated;

ABS Plastic Housing with steel grill. Mounting Bracket Included.

Supply of Quad Channel Energy Star Rated Class D Amplifier , 4 X 250W @

4Ω or better, Frequency Response (± 3 dB) 20 Hz - 20 kHz. Signal / Noise >

6 90 dB or better, Active Crossover, Protection Circuit : DC, Overheating,

Overload, Signal limiting, XLR Line Inputs , 2-Pin Terminal Outputs , 1U 19"

Rackmountable. Nos 1 1,16,466.00 1,16,466.00

Supply of 8-Port PoE Switch , Max power outlet : 8 PoE+ ports, up to 30W per

port,Energy Efficient Ethernet support ,Jumbo frame support,MAC table size :

4K,Packet buffer size : 192KB,PoE Auto balance,PoE budget : Up to 123W.

8 Supply of Audio Cable. Mtr 100 115.64 11,564.00

9 Supply of 2 Core 1.5 sqm core speaker cable along with PVC Conduit . Mtr 300 171.10 51,330.00

10 Supply of Various types of connector. Lot 1 23,600.00 23,600.00

11 Supply of Cat 6 Patch Cord . Lot 1 9,440.00 9,440.00

12 Supply of 12U AV Equipment rack . Nos 1 19,470.00 19,470.00

13 Installation , testing & Commissioning of the System. Nos 1 53,100.00 53,100.00

AV System For Seminar Hall -

Supply of Column loudspeaker 30W, metal,Sound pressure level at rated power

/1 W (1 kHz, 1 m)-105 / 92 Db SPL,Effective frequency range (-10 dB) 153 Hz

‒ 17.7 kHz,Horizontal opening angle at 1 kHz / 4 kHz (-6 dB)-198°/

14 130°,Vertical opening angle at 1 kHz / 4 kHz (-6 dB)-62°/ 18° ,Rated input

voltage 100 V,Rated impedance, Full power 333 Ω, Half power 667 Ω.

Supply of Power amplifier, 480W,Input Voltage 230 VAC ±10% at 50/60 Hz

or 24 VDC,Inrush Current 19 A at 230 VAC, 30 A at 24 VDC,Performance-

Rated Output (RMS) 480 W,Power reduction on backup power -1

15 dB,Frequency response 50 Hz to 20 kHz (+1 / -3 dB at -10 dB ref. rated

output),Distortion <1% at rated output, 1 kHz,S/N (flat at,max volume) > 90

dB,Power consumption,Max power consumption 1600 VA.

Supply of 10-Channel Mixing Console,Max. 4 Mic / 10 Line Inputs (4 mono +

3 stereo),1 Stereo Bus,1 AUX (incl. FX),"D-PRE" mic preamps with an

16 inverted Darlington circuit,1-Knob compressors,High-grade effects: SPX with

24 programs,PAD switch on mono inputs,+48V phantom power.

Supply of Wireless Handheld dynamic cardioid microphone with rack mount

receciver,Mic frequiency-15hz – 15khz,Operating Range-300 ft,Transmitter RF

Output Power-10 mW,Dynamic Range-100 dB,THD-0.5%,Gain Adjustment

17 Range-10 dB,Up to 12 compatible systems per frequency band, internal antenna

connector. Nos. 1 73,514.00 73,514.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

Supply of Wireless Headset dynamic cardioid microphone with rack mount

receciver,Mic frequiency-40 Hz to 20,000 Hz,Available Frequencies-524–865

MHz,Operating Range-300 ft,Transmitter RF Output Power-10 mW,Dynamic

18 Range-100 dB,THD-0.5%,Gain Adjustment Range-10 dB,Up to 12 compatible

systems per frequency band, internal antenna diversity, One-touch QuickScan

Supply of Multi‑Pattern Desktop Microphone 18” (45.7 cm) with inline

preamp,Cardioid polar pattern with tailored response for speech,Dual-section

gooseneck enables ease of positioning and placement options with Desktop

base mounts for gooseneck mics. No. 1 50,268.00 50,268.00

Supply of Pop-up Box With Easy access to connectors, Durable pneumatic

movement and mechanical latching mechanism,Two Universal Power

20 Socket,One USB-A for Charging,Two CAT6A RJ45 Network Port, One HDMI

Female Port,One USB-C Female Port,One USB-A Female Port for USB

peripheral connectivity,One 3.5mm Audio Jack. No. 1 32,568.00 32,568.00

Supply of 17U 600/650D UL Listed Floor mount Rack with Front perforated

door with 3 point lock, Rear mesh door with Cam lock and 3inch Castor Wheel

included with 2 no 6/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw

Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with

21 Power Cable 2.5 sq.mm 3 meter Length, 4nos 1U Metal Cable manager with

Plastic cable loops, 2nos CFM FAN set, 1no Monitor Tray - Ventilation - 495W

- 375D and H/W screw 920 sets).

Supply of EDLA CERTIFIED 86" 4K IR TOUCH PANELType Technology

Backlit D-LED (IPS Panel),Brightness 450 cd/m²,Contrast Ratio

1,200:1,Dynamic Contrast Ratio 30,000:1

Native Resolution 4K Ultra-HD (3840 x 2160),Viewing Angle (H/V)

178°/178°,Aspect Ratio 16:09,Refresh Rate (Hz) 60 Hz,Response Time 8ms

(Typ),Display Color (BIT) 1.07 Billion (10-bit),Installation Orientation

Landscape,Technology Infrared Touch,Touch Points 40 Points,Finger Accuracy

±1mm,Passive Pen Accuracy ±1mm,Touch Response Time <=5ms,Touch

22 Resolution 32,768 x32,768,Surface Protection Anti-Glare Thick Toughened

Glass,Touch Tools Finger, Stylus, Glove,,Opaque,Objects,System Version

Android™ v14.0,CPU Octa-Core,GPU Mali™ G52,Ram 8GB DDR4,Internal

Storage 128 GB (eMMC Flash),Input – Display HDMI v2.0 (x2) Side,HDMI

v2.0 (x2) Front,Input – Audio Mic(3.5)(x1),Output – Display HDMI v2.0 (x1)

Side,Output – Audio Audio-Out (3.5mm) (x1), SPDIF-Out (x1),Internet LAN

(RJ45) (x2) (10/100Mbps),Control RS232-In (x1),Wireless – Wifi

IEEE802.11ax (2.4GHz/5GHz),Wireless – Bluetooth BT 5.2.

Supply, Installation, Testing & Commissioning of Digital Podium with 21.5"

Interactive Display having Motorized Panel Facility,Monitor Highly sensitive

Interactive Touch Monitor and mechanism to make the panel stable to avoid

any kind of shake while wiring. Screen Type Color LED; Scratch resistant,

antiglare & overlay tempered vandal resistant glass (3mm thickness),Size 21.5”

(54.61 cm),Resolution 1920 x 1080 (Full HD),Aspect Ratio 16:9/

16:10,Response Time 8 ms,Brightness 250 cd/m2,Lamp Life Time 20,000 Hrs,

23 Contrast Ratio 1000:1, Computer Interface USB x 1, VGA x 1, DVI x 1,HDMI

x 1,Interactive Resolultion 4000 Lpi (lines per inch),Viewing Area 477mm x

268mm (H/V), 22 inch,Reading Accuracy ±0.5 mm (center),Tracking Speed

200 points per second,Pen Pressure sensitivity 2048 Levels,Viewing Angles

160(H) ; 160(V),Touch Finger and Stylus,Ports HDMI in x 1, VGA in X 1,DVI

- I in X 1, with gooseneck microphone facility, USB 2.0 A Type for

Touch,Power 12V(DC) 3.5 Amp. Make: Peoplelink/ Globus/ UNI

Supply of HDMI Cable with moulded HDMI connectors at both endes for HD

Audio and Video. Set 1 14,160.00 14,160.00

25 Supply of 2 Core Loudspeaker Cable with PVC Conduit. Mtr 200 171.10 34,220.00

26 Installation testing & Commissioning of the System. Job 1 88,500.00 88,500.00

Total Electrical Cost-B - 65,23,159.18 1,58,65,748.72

PHE WORK-C 0

Internal Sanitary & Plumbing System

Supplying all materials, labour, T&P and providing and fixing to wall or ceiling

and floor CPVC pipes conforming to IS:15778 having thermal stability for hot

and cold water supply, including all CPVC plain and brass threaded fittings

1 including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of

pipes & fittings with one step CPVC solvent cement and testing of Joints all

complete as per specification and direction of the Engineer in charge.

In Ground Floor- 0

20mm dia C-PVC pipe MTR 130.00 360.14 46818.00

25mm dia C-PVC pipe MTR 95.00 479.91 45591.00

32mm dia C-PVC pipe MTR 40.00 689.47 27579.00

40mm dia C-PVC pipe MTR 10.00 927.83 9278.00

In First Floor- 0.00

20mm dia C-PVC pipe MTR 60.00 373.71 22422.00

25mm dia C-PVC pipe MTR 40.00 493.48 19739.00

32mm dia C-PVC pipe MTR 25.00 705.05 17626.00

40mm dia C-PVC pipe MTR 20.00 947.89 18958.00

In Second Floor- 0.00

20mm dia C-PVC pipe MTR 60.00 387.28 23237.00

25mm dia C-PVC pipe MTR 50.00 507.05 25352.00

32mm dia C-PVC pipe MTR 30.00 720.74 21622.00

40mm dia C-PVC pipe MTR 25.00 967.89 24197.00

In Terrace Floor- 0.00

32mm dia C-PVC pipe MTR 125.00 736.32 92040.00

40mm dia C-PVC pipe MTR 90.00 987.90 88911.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil

waste ventilating pipes and fittings of the following outside diameter

conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden

plugs or laying in trenches including jointing with supply of approved rubber

2 lubricant by non-heat application method/as per manufacturer's specification,

testing, earthwork in excavation in all kinds of soil and refilling of trenches ,

cost & conveyance of all materials to worksite, payment of taxes etc. all

complete as per P.H specification and direction of the Engineer-in-charge.

110mm U-PVC SWR Pipe MTR 260.00 611.00 158861.00

80mm U-PVC SWR Pipe MTR 140.00 400.37 56052.00

110mm U-PVC D/Jn door EACH 40.00 650.42 26017.00

110mm U-PVC Plain tee EACH 45.00 380.79 17135.00

110mm U-PVC door bend EACH 50.00 346.45 17322.00

110mm U-PVC Plain bend EACH 38.00 273.76 10403.00

110mm U-PVC ‘P’ Trap EACH 40.00 586.81 23473.00

110mm U-PVC offset without ear EACH 32.00 480.73 15383.00

110mm U-PVC Cowl EACH 40.00 68.68 2747.00

110mm U-PVC Socket EACH 35.00 188.92 6612.00

75mm U-PVC Plain tee EACH 50.00 380.79 19039.00

75mm U-PVC Socke EACH 45.00 95.93 4317.00

110mm PVC SWR Clamp/clip EACH 120.00 50.50 6060.00

Supply,Providing, fixing, testing and commissioning in position UV stabilised

110 mm dia PVC Rain water pipe with Fittings (IS: 13592 Type - A). In case

of ceiling hanging, the supply of Pipe Clamps (Chilly/MS angle) as per engineer

in charge.110 mm diameter. 0

110 mm dia PVC (IS:13592, Type -A) MTR 80.00 295.47 23638.00

Supply, Providing and fixing 150 mm x 150 mm.dia CI Grating for Rain water

4 pipes 110 mm dia.

150 mm x 150 mm.dia CI Grating EACH 6.00 76.70 460.00

Supplying all materials,labour,T&P and fitting and fixing vitrous Chaina Wall

Hung Water Closet (European type water closet - EWC) with integral "P" or

"S" type trap to the floor including wodden plug and chromoum plated screw

including jointing the trap with soil pipe in CM(1:1) fixing PP Soft Close Seat

5 cover for Wall Hung Water Closet with crmium plated brass hinges and rubber

buffers including polishing etc all complete as per specification and direction of

Engineer-in-charge. Wall Hung European Water Clost "P" or "S" trap.

Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity

Single Piece Slim Concealed Cistern body with Installation Kit & "S" Type

Drain pipe Connection set for Wall Hung Water closet (without flush control

plate) with 32mm dia flush bend etc all complete as per specification and

direction of the Engineer in charge.

10 litres PVC L.L. EACH 14.00 2014.61 28205.00

Supplying all materials, labour, T&P and fixing the following vitreous china

Wash Down Water Closet (European type W.C. pan) with integral 'p' or 's' trap

to the floor with wooden plug and chromium plated pedestal screws including

jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and

cover for wash down water closet with chromium plated brass hinges and

7 rubber buffers including polishing , cost & conveyance of all materials to

worksite, payment of royality, taxes etc. all complete as per P.H specification

and direction of the Engineer-in-charge

European water closet with 'p' trap plain

Matrix Set -1 (WB 65 x 35 with one pair mounting brackets, EWC & Cistern

8 complete with fittings & seat cover, one no hinged rail 76 cm and five nos of

grab rails 60 cm)(Matrix set) EACH 1.00 78575.49 78575.00

Supplying all materials, labour, T&P and fixing vitreous china water closet,

squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly

embedded in cement concrete (1:5:10) using 4cm size hard granite metal

including fixing a pair of vitreous china 250mm x 130mm x30mm footrest,

fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water

colset squatting pan including jointing the trap with pan in cement mortar (1:1)

9 cutting the floor and mending good the damages , cost & conveyance of all

materials to worksite, payment of royality , taxes etc. all complete as per P.H

specification and direction of the Engineer-in-charge

580mm size Orissa pan

Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters

capacity low level flushing cistern with a pair of cast iron or M.S. brackets

complete with fittings such as siphonic arrangements 15mm nominal size

brass/pvc ball valve with polythene float CP brass handle,unions and couplings

for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush

10 bend, 15mm dia pvc inlet connection pipe including cutting holes and making

good the same and connecting the flush bend with cistern and closet and

connceting the inlet pipe with suupply main , cost & conveyance of all materials

to worksite, payment of taxes etc. all complete as per P.H specification and

direction of the Engineer-in-charg

10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend EACH 18.00 2806.98 50526.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

Supplying all materials, labour T&P and fixing wash basins with hole for pillar

taps with cast iron or M.S.brackets painted white including cutting holes in

walls and making good the damages with supply of wooden plugs, screws and

cement etc, fixing pedestal for wash basin recessed at the back for the reception

of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for

wash basin including brass check nut complete, fixing pillar taps capstan head

11 screw down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and

back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection

pipe and making connection with pillar cocks and supply mains for wash basin,

fixing 32mm dia CP brass waste, cost & conveyance of all materials to

worksite, payment of taxes etc. all complete as perP.H specification and

direction of the Engineer-in-charge

Wall Hung basin with Fixing Accessories (Size: 590x490x185mm) LYS-WHT-

Under counter Basin with Fixing Accessories,

Size: 560x430x195 mm, Shape: Oval EACH 20.00 5875.81 117516.00

32mm dia PVC waste pipe with brass coupling nut EACH 36.00 59.59 2145.00

15mm dia PVC inlet connection pipe 0.45m long EACH 36.00 40.12 1444.00

Supplying all materials, labour, T&P and fixing bowl pattern urinal conforming

to IS:771-part-3-1985 of the following sizes including connecting the urinal

with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with

12 chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader

including cutting holes in walls and making good the damages with supply of

wooden plugs, screws and cement etc all complete as per specification and

direction of the Engineer in charge. Half stall urinal

15mm dia urinal spreader EACH 5.00 338.19 1691.00

32mm dia C.P. dome waste EACH 5.00 151.63 758.00

Supplying all materials labor T&P & Fitting & fixing CP shower with rim with

13 supply of red lead and yarn nail complete as per direction of Engineer in charge.

15mm CP revolving shower EACH 24.00 663.75 15930.00

Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of

14 the following nominal bore with supply of all jointing materials complete as per

specification and direction of the Engineer in charge. 0.00

15mm dia CP 2way bib cock EACH 32.00 1348.03 43137.00

15mm dia CP Health faucet EACH 32.00 863.52 27633.00

15mm dia CP Ablution Tap EACH 12.00 944.94 11339.00

15mm dia CP Angle stop cock EACH 100.00 970.43 97043.00

Geyser ELM-WHT-V006 EACH 16.00 9756.59 156106.00

Wall Mixer with provision for Overhead Shower EACH 24.00 1789.47 42947.00

15mm dia CP Pillar cock EACH 34.00 915.56 31129.00

15mm dia CP Sink cock EACH 30.00 1465.21 43956.00

15mm dia CP extension piece EACH 62.00 91.33 5663.00

PVC Connection Pipe EACH 29.00 40.12 1163.00

PVC Discharge Pipe EACH 67.00 59.59 3993.00

15mm dia. C.P flange EACH 166.00 91.33 15161.00

125mm dia CP gratting EACH 213.00 67.73 14427.00

25mm dia brass or gun metal fullway valve EACH 35.00 1431.69 50109.00

32mm dia brass or gun metal fullway valve EACH 25.00 2096.03 52401.00

32mm dia CPVC Ball valve EACH 18.00 2413.81 43449.00

40mm dia CPVC Ball valve EACH 15.00 3440.88 51613.00

Supplying all materials, labour, T&P and fixing wash Lab sink with outlet at

end and weir overflow including fitting and fixing a pair of cast iron or MS

brackets painted white, fixing 50mm/40mm dia ss waste, fixing 50mm/40mm

15 dia PVC waste pipe 910mm long with supply of wooden plugs, screws and

cement etc including cutting holes in walls and making good the damages etc all

complete as per specification and direction of the Engineer in charge.

600x450x250 mm stainless steel Labrotory sink

600x450x200 mm stainless steel kitchen sink with drain board-glossy-IS:13983 -

Supplying all materials,labour,T&P and fixing standard sized Glass-shelf,

Towel Rail, Towel Ring, Soap Holder, Soap dispenser with C.P brass bracket

17 and guard rail complete fixed to wooden pluges with screw etc.all complete as

per specification and direction of Engineer-in-charge.

600mmx125mm size glass shelf with C.P ruard Rail. EACH 34.00 1593.00 54162.00

25mmx600mm long CP Towel Rail. EACH 32.00 1068.49 34192.00

CP Towel Ring. EACH 34.00 769.95 26178.00

CP Soap holder EACH 24.00 333.59 8006.00

C P Soap Dispenser. EACH 34.00 303.61 10323.00

Supplying all materials, labour, T&P and fixing of Stainless Steel Coat Hook

alongwith all necessary accessories complete including cutting, making good

the walls, floors, slab wherever complete in all respect as per specification and

direction of the Engineer in charge. 0.00

Stainless Steel Coat Hook. EACH 42.00 1003.00 42126.00

Supplying all materials, labour, T&P and fixing mirror of superior glass

mounted minimum 5mm thick on 6mm thick A.C sheet or plywood sheet and

fixed to wooden plugs with CP screws and washers complete as per

specification an direction of the Engineer in charge. 0

Single Mirror (Bevelled edge) 600mmx450mm EACH 34.00 958.16 32577.00

Supplying all materials, labour, T&P and providing fitting and fixing (Aqua

guard) Pure Chill 80 PSS UV of size 750x570x1350mm height with water

storage capacity 80 liters along with 2 nos of faucets 1 for cold water and 1 for

normal water including a flow of 1.5 ltr per minute etc all complete as per

approved drawing,specification and direction of the Engineer in charge.

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

Supplying all materials, labour, T&P and providing fitting and fixing

Aquaguard PRO Thermapure 120 PSS RO ACH which gives you Hot,Cold &

Ambient purified water.Aquaguard PEO Thermapure 120 PSS RO has built-in-

3 stage combinations,Tank Capacity 120Ltr. Cold Water-80 Ltrs,Hot water-20

Ltrs.,Ambient water-2- Ltrs. Cooling capacity-60 LPH,Refrigerant-HFC

R134a,Cold water temperature-15 Deg.C+/-1*,Heating coil wattage-

21 2000W,Hot water temperature-50 Deg C+/-1,Thermal insulation-PUF,No of

Faucets-1 Hot,1 Cold,1 Ambient,Tank,front panel and drain tray MOC-

SS304,Other body panels-Powder coated CRCA Steel,No of filtration stages-

7,RO Capacity-50 LPH*,RORecovery%-50%*,TDS Reject-90%*, Dimentions

(WxDxH)cm-75x72x144,Net weight-92 Kg.etc.all complete as per direction of

the Engineer-in-charge.

Supplying all materials , labour, T&P and fixing rotational moulded

polyethylene cylindrical vertical water storage tanks conforming to

IS:12701/1996 including cutting holes through the tank and fixing mild steel

tubes and fittings and providing extra sockets and jam nuts, fixing ball valve

etc. including hoisting upto a height of 5 metres above ground level and placing

the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr width

KB brickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr

thick circular protection wall of 0.46mtr height to support the tank,12mm thick

22 cement plaster in cement mortar (1:6) over brick work, RCC slab of size

1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m

average length in cement concrete (1:2:4) using 12mm size crusher broken hard

black granite chips and required steel reinforcement including centering and

shuttering,watering,curing ,cost of all materials,conveyance of all materials to

worksite , payment of royalty, all taxes etc.all complete as per approved

drawing , P.H. specification and direction of Engineer-in-charge

5000 liters capacity PVC water storage tank roof of Second floor EACH 1.00 92418.66 92419.00

Sewage portion

Supplying all materials ,labour ,T&P and constructing gully trap chamber of

inside size 250mmx250mm with 8cm thick RCC precast cover slab in cement

concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation

concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around

21 trap, Fly ash brick work in cement mortar (1:6) in foundation and plinth and

inside 12mm thick cement plastering (1:3) finished with a floating coat of neat

cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm

size CI grating etc.all complete as per drawing, specification and direction of

Engineer-in-charge.

In side size 250mmx250mm EACH 12.00 2107.24 25287.00

Supplying all materials ,labour ,T&P and constructing Inspection Chamber of

inside size 760mmx760mmx460mm with cement concrete (1:3:6) using 40mm

size crusher broken hard black granite metal on bed , Fly ash brick work in

cement mortar (1:6) in foundation and plinth, moulding and shaping the channel

inside and benching with cement concrete (1:2:4) using 12mm size crusher

broken hard black granite chips, 12mm thick cement plaster (1:3) with cement

punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab

22 (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C

man hole cover, earth work in excavation in all kinds of soil and refilling the

cavity around the chamber including watering,curing,cost of all materials,

conveyance of all materials to worksite, payment of royalty,all taxes etc.all

complete as per approved drawing, P.H specification and direction of Engineer-

in-charge .

Inside size : 760mmx760mmx460mm EACH 15.00 12719.10 190787.00

Supplying all materials ,labour ,T&P and constructing Man Hole Chamber of

inside size 910mmx910mmx910mm with cement concrete (1:3:6) using 40mm

size crusher broken hard black granite metal on bed , Fly Ash brick work in

cement mortar (1:6) in foundation and plinth, moulding and shaping the channel

inside and benching with cement concrete (1:2:4) using 12mm size crusher

broken hard black granite chips, 12mm thick cement plaster (1:3) with cement

punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab

23 (1:2:4) using 12mm size crusher broken black hard granite chips with R.C.C

man hole cover, earth work in excavation in all kinds of soil and refilling the

cavity around the chamber including watering,curing, conveyance of all

materials to worksite, payment of royalty, taxes etc.all complete as per

approved drawing, P.H specification and direction of Engineer-in-charge.

Man hole chamber Inside size 910mmx910mmx910mm EACH 10.00 24738.70 247387.00

addl depth of 0.30m upto 4.50m depth EACH 1.00 3750.63 3751.00

Providing and laying non-pressure NP3 class (light duty) R.C.C. pipes with

24 collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1

cement : 2 fine sand) including testing of joints etc. complete. 0.00

150mm dia Hume Pipe- NP-3. MTR 150.00 532.42 79862.00

200mm dia Hume Pipe- NP-3. MTR 80.00 684.05 54724.00

250mm dia Hume Pipe- NP-3. MTR 50.00 778.33 38916.00

Construction of Rain water Recharge Pit- 2 Nos.

Sinking of tube well through D.T.H.Rig. 0

200mm dia- 0.0m to 30.00m MTR 50.00 923.47 46173.00

26 Lowering of PVC casing pipe inside bore. 0.00

200mm dia- 0.0m to 30.00m MTR 50.00 212.99 10650.00

27 Cost.of 200mm dia (Sch.80)Pipe MTR 50.00 2095.21 104760.00

28 Cutting slot in casing pipe for recharge of rain water MTR 50.00 417.13 20857.00

29 Labour for packing gravel outside the tube well 0.00

2x25.0mx22/28{(0.40)²-(0.20)²}=4.7 CUM 4.70 366.98 1725.00

30 Cost of washed gravel. CUM 4.70 2033.73 9559.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

Earth work in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift

including rough dressing and breaking clods to maximum 5cm to 7cm and

31 laying in layers not exceeding 0.3 mtr in depth and as per direction of the

Engineer in charge.

Supplying all materials, labour, T&P and providing cement concrete (1:4:8)

with 4cm size hard granite metal including watering, curing, conveyance of all

materials to worksite, payment of royalty, taxes etc all complete as per

specification and direction of the Engineer in charge. CUM 2.16 6453.54 13969.00

Supplying all materials, labour, T&P and providing brick work with Fly ash

bricks having crushing strength not less than 75kg/cm² with dimensional

tolerance ± 8 percent in cement mortar (1:6) including watering, curing,

conveyance of all materials to worksite, payment of royalty, taxes etc all

complete as per specification and direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing 12mm thick cement plaster

(1:6) on brickwork including watering, curing, conveyance of all materials to

worksite, payment of royalty, taxes etc all complete as per specification and

direction of the Engineer in charge. SQM 182.40 225.73 41174.00

Supplying all materials, labour, T&P and providing cement punning including

watering, curing, conveyance of all materials to worksite, payment of royalty,

taxes etc all complete as per specification and direction of the Engineer in

charge. SQM 97.20 48.27 4692.00

Supplying all materials, labour, T&P and providing rigid and smooth centering

and shuttering for R.C.C works including false work and dismantling them after

36 casting including conveyance of all materials to worksite, payment of royalty,

taxes etc all complete as per specification and direction of the Engineer in

charge. SQM 6.26 899.28 5629.00

Supplying all materials, labour, T&P and providing reinforced cement concrete

work of M-25 grade with 20mm and down grade black hard granite crusher

broken stone chips including hoisting, laying, watering, curing, conveyance of

37 all materials to worksite, payment of royalty, taxes etc all complete as per

specification and direction of the Engineer in charge.

Supplying all materials, labour, T&P and providing M.S reinforcement for

R.C.C work including cutting, bending, binding, and tying the grills and placing

in position including cost of binding wire 18 to 20 gauge, conveyance of all

38 materials to worksite, payment of royalty, taxes etc all complete as per

specification and direction of the Engineer in charge.

39 Providing and filling filter media 0.00

a 40mm size bolder-2x6.0x2.50x0.85=25.5 CUM 25.50 1669.11 42562.00

b 20mm size washed gravel-1x6.0x2.50x0.40=12.00 CUM 12.00 2033.73 24405.00

c Course sand-1x6.0x2.50x0.30=9.0 CUM 9.00 687.35 6186.00

40 Providing fitting and fixing M.S.grill,Jalli cover over the harvesty pindi. Qntl. 4.00 9322.00 37288.00

Sinking of 200mm x 150mm Large Tube well through DTH method - 2

Labour for drilling a perfectly vertical bore hole of specified dia for a specified

depth below ground level through consolidated and unconsolidated rock with

down the hole hammer drilling rig or combination rig as required to suit the site

condition as per the direction of the Engineer in charge including use of own rig

with its accessories, tools and plant and consumables etc for lowering of

200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket

41 and with or without well screen as per the necessity for soft, medium, hard and

boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse

of overburden is to be provided by the contractor including lowering and

withdrawing after completion of the tube well), 200mm dia to 400mm dia in

overburden portion including packing of gravel supplied by the contractor for

400mm dia bore only .

Drilling of 200mm dia bore 0 to 30 mtr (2x30mtr)

42 Drilling of 200mm dia bore 30 to 45 mtr (2x15mtr) MTR 30.00 783.28 23499.00

43 Drilling of 150mm dia bore 45 to 100 mtr (2x55mtr) MTR 110.00 783.28 86161.00

Labour for lowering the following size of PVC casing pipes with or without

slotted pipes as per necessity from ground level upto 300 mtrs depth and fitted

and set up in perfectly vertical position including cutting and threading of blank

pipes and slotted pipes and supplyinging and fixing of all jointing materials

44 ,extra sockets and T&P etc. all complete and keeping the top of casing pipe

threaded including plugging the tubewell to prevent entry of foreign materials.

Lowering of 200mm dia PVC casing pipes 0 mtr to 30 mtrs (2x30mtr)

45 Lowering of 200mm dia PVC casing pipes 30 mtr to 45 mtrs (2x15mtr) MTR 30.00 163.08 4892.00

46 Cost of 200mm dia PVC schedule - 80 pipe (2x46mtr) MTR 92.00 1927.88 177365.00

Cleaning and developing the tube well with supply of compressor worked till

clear and adequate discharge is obtained from the tube well including supply

47 and use of all necessary equipment and labour as per direction of the Engineer

in charge .

Supplying all materials, labour, tools and plant and withdrawing casing pipes

from the unsuccessful bore and depositing in the departmental store in good

condition.

Labour for withdrawing of 200 mm dia PVC/GI Casing Pipe MTR 45.00 419.49 18877.00

Supplying all materials,labour,T&P and providing around sealing by cement

concrete grouting of annualr space around GI/PVC housing pipe upto 5 mtr

below ground level ( as per drawing ) to plug the bore hole excluding cost of

cement all complete as per direction of the Engineer-in-charge . Mimimum one

49 meter of casing pipe to nserted in the bore in to the rock the bottom to ensure

sanitary sealing ( excluding cost of cement which willbe supplied by the

Department ) .

CC(1:2:4) with 12mm chips for grouting up to 5 mtr Depth in CUM 0.40 7727.47 3091.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

Installation of 2 HP submerssible pump-motor

Supplying all materials, labour, T&P and providing fitting & fixing

submerssible pump with squirrel cage induction type submerssible electric

motor to run single-phase line voltage ranging from320 to450 volt confirm to

IS 8034/89 with following specification suitable control pannel jointing with

50 GI/PVC/HDPE pipe, electrification, testing, commissioning , trial running,

conveyance of all material to work site, payment of all taxces etc all complete

as per PH specification and direction of Engineer-in-charge.

KS4HF-2010 2H.P three phase 10 stage head range 30 to 54 metres, discharge

155 to 110 L.P.M with outlet dia of 32m.

51 DOL contol pannel EACH 3.00 4490.49 13471.00

52 2.50 sqmm flate cable MTR 250.00 151.16 37790.00

53 40mm dia steel short piece EACH 6.00 179.71 1078.00

54 Steel rope with cover MTR 100.00 31.51 3151.00

55 Well cap EACH 2.00 179.71 359.00

56 50mm size CI bracket EACH 6.00 107.73 646.00

57 Auto Sensor EACH 2.00 5226.81 10454.00

Labour charge for lowering pipes including transportation and supply of nut

58 bolt of required size including ruberinsertion etc all complete as PH

specification and direction of Engineer-in-charge.

Supplying all materials , labour, T&P and providing and fixing to wall or ceiling

and floor PVC pipes conforming to ASTM-D-1785/89 ( Sch-80 ) and G.I pipe

fittings of the following nominal bore with clamps including making good the

59 wall,ceiling and floor ,testing all complete as per P.H. specification and

direction of Engineer-in-charge .

In ground floor

50mm dia UPVC ASTM-D Pipes MTR 100.00 674.61 67461.00

Supplying all materials, labour, T&P and constructing Bore well protection

chamber of the inside size 650x650x1000hight with cement concrete (1:3:6)

using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork

in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g

chips,12mmthick cement plaster (1:4) inside and outside, R.C.C cover slab in

(1:1.5:3) using 12mm size h.g chips, earthwork in excavation in all kinds of soil

60 and refilling the cavity around the chamber including watering, curing,

conveyance of all materials to worksite, payment of royalty, taxes etc all

complete as per approved specification and direction of the Engineer in charge.

Bore well chamber

Construction of 2 Nos of 10KLD Capacity RCC OHT for Firefighting &

Domestic.

R.C.C. work of M-25 grade with 20mm and down grade black hard black

crusher broken granite stone chips of approved quality from approved quarry

including hoisting, lowering, laying and compacting concrete, watering curing,

centering, shuttering and finishing the exposed surfaces smooth with cost,

59 conveyance, royalties, taxes of all materials with all labour,labour cess and T &

P required for the work etc. complete in all respect but excluding the cost and

conveyance of M.S. rods or Tor steel and binding wire of 18 to 20 gauge and

labour charges for straightening, cutting, bending, binding and tying the grills

and placing in proper position and as per spection and the direction of the

Engineer-in-charge.

In Terrace floor 0.00

RCC in Column- CUM 1.4760 20085.61 29647.00

RCC in beam CUM 3.11 20085.61 62427.00

RCC in Base slab CUM 5.18 17708.00 91799.00

RCC in Roof slab CUM 4.37 17708.00 77349.00

RCC Wall SQM 7.70 19046.50 146582.00

Supplying Cutting, straightening coiled or bent up M.S. Rod or tor steel of

primary steel producers such as SAIL / TATA / RINL / JINDAL STEEL /

SHYAM STEEL (grade Fe-500D) etc. including bending, binding, welding

and jointing if necessary and tying the grills and placing in position as required

for R.C.C. Work and for providing fan hooks as required, hoisting, lowering,

60 laying including cost, conveyances of M.S. Rod or tor steel and binding wires

of 18 to 20 gauge and labour required for the work for bending, binding and

tying the grills in all floors with labour cess etc. (payment will be made on

standard weight of B.I.S. for M.S. Rods or tor steel only) etc. complete as per

specification & direction of Engineer-in-charge.

In Terrace floor Qntl 32.75 10319.22 337934.00

Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with

screened and washed sharp sand for mortar and finished smooth to R.C.C.

work after closed deep chipping & slurry treatment including watering and

61 curing, rounding of corners, providing grooves where ever necessary with cost,

conveyance and royalties of all materials with cost of all labour, T&P, and

scaffolding required for the work etc. complete in all respect as directed by the

Engineer in charge. 0.00

In Terrace floor SQM 92.40 263.16 24317.00

Supplying all materials, labour, T&P and providing cement punning including

watering, curring and conveyance of all materials to site. SQM 92.40 48.50 4482.00

Priming one coat with wall cement primer (water bound) to make an even

finished surface in all floors and heights to wall surface of approved make and

shade including sand papering, applying putty wherever necessary & cost of

scaffolding, staging charges with cost, conveyance, cost of all labour,labour

cess T&P etc. complete as per the direction of the Engineer-in-charge.

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST

Finishing plastered surfaces of walls with cement based wall putty (Water

based) of approved make and finishing the surface smooth and even by sand

papering to receive painting in walls, at all heights with staging wherever

necessary with cost, conveyance, all materials, cost of all labour,labourcess, all

T&P etc. required for the work complete in all respect as per the direction of

the Engineer-in-charge. SQM 92.40 107.50 9933.00

Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm

dia 2mm thick circular pipe and balustrade 32mmx32mmx2mm at the rate of

65 mtr.Center to center and square pipe 32x32x2mm below including welding

with stanless steel elect rod and fixing with necessary accessories etc.complete

as per direction of the Engineer-in-charge. Kg 200.00 404.98 80995.00

Providing fitting and fixing MS cover made out of MS angle and sheet duly

welding and fixing with frame and hinges along with locking arrangement of

size 60cmx60cm etc complete as per direction of Engineer-in-charge

Wall painting two coats with Weather coat paint (1st quality) exterior grade of

approved make & with a approved quality primer to make an even finished

surface in all floors and heights with all scaffolding and staging charges

including cost, conveyance, cost of all labours, T & P, sundries etc. as required

for the work complete in all respect as per the direction of the Engineer-in-

Charge. 0.00

In Terrace floor SQM 92.40 123.43 11405.00

Construction of 30KLD RCC Domestic UGR.

Earth work in excavation of foundation in all kinds of soil within 50m initial

66 lead and 1.5m initial lift including rough dressing & breaking clods to

maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth and as

per direction of the Engineer-in-Charge. CUM 36.00 326.73 11762.00

Initial lift CUM 9.60 357.88 3436.00

Supplying all materials, labour, T&P and filling in foundaton and plinth with

sand well watered and rammed including conveyeance of all materials to

worksite,payment of royalty, taxes etc all complete as per direction of the

Engineer in charge. CUM 3.60 1298.74 4675.00

Supplying all materials, labour, T&P and providing cement concrete (1:3:6)

68 with 40mm H.G metal including watering, curing and conveyance of all

materials to site. CUM 3.60 7667.77 27604.00

Supplying all materials, labour,T&P and providing cement concrete (1:1.5:3)

for RCC work using 12mm HG chips including hoisting,laying,curring and

conveyance of all materials to site etc complete.

a. R.C.C floor , walls and roof slabs CUM 13.91 9527.44 132527.00

Supplying all materials, labour, T&P and providing M.S.Reinforcement for

RCC work including cutting, banding, binding, straightening and trying the

grills and placing in position including cost of binding wire 18 to 20 gage.

1.00 qtl per cum Qntl 13.90 10704.49 148792.00

Supplying all materials, labour, T&P and providing rigid and smooth centering

and shuttering for RCC work including false work and dismantling then after

casting including cost of materials complete in ground floor.

a RCC Walls SQM 72.48 1421.31 103017.00

b RCC Slab SQM 15.00 899.28 13489.00

Supplying all materials, labour, T&P and providing 6mm thick cement plaster

72 (1:3) including watering,curring and conveyance of all materials to site.

Inside/outside portion SQM 105.84 263.16 27853.00

Supplying all materials, labour, T&P and providing cement punning including

watering, curring and conveyance of all materials to site. SQM 47.00 48.50 2279.00

Supplying all materials, labour, T&P and futting and fixing 20mm dia MS/CI

74 step iron including supply of necessary C.C(1:2:4) for fixing etc complete as per

P.H.D. specification. EACH 8.00 293.11 2345.00

TOTAL PHE COST-C 66,19,973.00

Digitally signed by JAYA

PRAKASH GURU

Date: 2026.02.27 14:52:08 IST