Zone-3, Tajganj (Ward No. 89) Construction of a community building at the Kushwaha Panchayati Bhawan in Hajjupura.

Excavation in foundation in ordinary soil (loam, clay or sand) including, lift up to 1.50 m and lead up to 30m and including filling watering and ramming of oxcavated the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-in-charge up to a distance of 30m form the foundation trenches. (Rate including Royalty of earth also) (4-Chapter S.I.NO4.01)

Providing and laying cement concrete in l :5:10 ( Cement : 5 Coarse sand : 10 graded stone aggregate40 mm nominal size) and curing complete, lncludingcost of form work. in Foundation and floors.

Class-150 brick work in 1:4 cement and Coarse sand (1.25 fineness modulus mortor in Foundation including supply of all material, labour and tolls and plants etc. All complete. (cp-6,S.I. No. 2)

Providing and laying cement concrete in 1:2:4 (1 Cement : 2 coarse sand :4 graded stone aggregate 20 mm nominal size) and curing complete, lncluding cost of form work. ln Foundation and floors..(5-Chapter Sr.No.5 Si.No.6)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 2023 SH-6.4.1 )

R.C.C. work Providing and laying in position specified grade of renforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement. All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (S.I. No. 5.1.3)

Mild Steel or iron in plain work such as reinforced concrete or reinforced brick work (When not included in and an overall rates) brought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage bend hooks and authorized over lapping shall be measured up to floor two level. (10 mm to 12mm tor (TMT Bars)

Centering and shuttering including strutting, propping etc. and removal of form work for :columns, piers, abutments, pillars, posts and struts.(DSR 2023 SH-4.3.3 )

12 mm cement plaster of mix : 1:4(1 cement: 4 fine sand)(DSR 2023 SH-13.1.1 )

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(DSR 2023 SH-10.1 )