Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.4 LAccepted-AOC | L1 | Accepted-AOC HIGHER | |
| 2 | L2₹20.3 L+₹46,250 (2.33%)Rejected-Finance | L2 | Rejected-Finance HIGHER | |
| 3 | L3₹21.0 L+₹1.1 L (5.45%)Rejected-Finance | L3 | Rejected-Finance HIGHER | |
| 4 | L4₹21.6 L+₹1.7 L (8.49%)Rejected-Finance RIDMALSAR PUROHITAN BIKANER RAJASTHAN 334022 | BIKANER | RAJASTHAN | 334022 | L4 | Rejected-Finance HIGHER | |
| 5 | L5₹24.7 L+₹4.8 L (24.0%)Rejected-Finance | L5 | Rejected-Finance HIGHER |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
11 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Amritsar
GE Amritsar pin 143001
CERTAIN REPAIRS TO OTM ACCN OF MH AND SHO UNDER AGE BR-I AT AMRITSAR CANTT
2023_MES_618588_1
GE/ASR-46/2023-24
Open Tender
Civil Works
Works
180 days
GE Amritsar
class D category a i
8 documents required · 8 mandatory
₹500
GE Amritsar
₹60,000
18 Sept 2024
13 Sept 2023
12 Oct 2023
13 Sept 2023
11 Oct 2023
28 Sept 2023
Amount
Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:4 finishing even and smooth without using extra cement ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for rendering 10 mm thick on brick work or concrete surfaces on ceiling in CM 1:3 finishing even and smooth without using extra cement ; Complete all as specified and directed by Engineer-in-charge.
Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 ; Complete all as specified and directed by Engineer-in-charge.
All as per Srl item No 6 above but except bricks (old dismantled serviceable bricks obtained from Srl item No 5 shall be reused after necessary cleaning of mortar).
Material and Labour for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, in half brick thick walls and built in CM 1:4 ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for applying two coats of whitewash on wall including preperation of newly plastered surfaces ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for applying one coat of whitewash on wall including preperation of old plastered surfaces ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for applying two coats of whitewash on ceiling including preperation of newly plastered surfaces ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for applying one coat of whitewash on ceiling including preperation of old plastered surfaces ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour preparation of newly plastered surface of wall and applying two coats cement base paint over a coat of primer to match the existing treatment ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour preparation of old plastered surface of wall and applying one coat cement base paint to match the existing treatment ; Complete all as specified and directed by Engineer-in-charge.
Material and labour preparation of newly plastered surface of wall and applying two coats of oil bound distemper with necessary putty filling and over Chalk primer ; Complete all as specified and directed by Engineer-in-charge.
Material and labour preparation of old plastered surface of wall and applying one coat of oil bound distemper with necessary putty filling ; Complete all as specified and directed by Engineer-in-charge.
Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) ; Complete all as specified and directed by Engineer-in-charge.
All as per Srl item No 17 above but size of opening exceeding 1.5 Sqmtr and not exceeding 4 Sqmtr.
Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for Box type steel window made of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame, with MS square bar grill and comprises glazed skeleton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass including fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1020/08 Sh 1/3 to 3/3 dt 01 May 2008 ; Complete all as specified and directed by Engineer-in-charge..(a) Hold fast 150mm long of 12mm x 3mm MS flat - 4 Nos per Window.(b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf.(c) MS tower bolt 150mm long - 02 Nos/leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 01 No per leaf.(e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf.(f) MS pintol hinges size 75mmx12mm - 2 Nos per leaf Note :- Sheet glass, wire mesh and painting shall be measured and paid separately.
Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 ; Complete all as specified and directed by Engineer-in-charge. NOTE:-Sheet glass and painting shall be measured and paid Separately.
Supply and Fixing pressed steel frames 1.25mm thick for door size of frame 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing pressed steel frames 1.25mm thick for door size of frame 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in bed blocks for hold fast & similar work etc ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Solid PVC Door Frame of Size 50mm x 47mm made out of 5mm plain colour PVC Sheet reinforced with MS Square tube in opening as per specification and drawing ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 27 to 30 mm thick factory made solid PVC moulded Door shutter with 2,3 or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face and 2mm thick plain colour PVC Sheet on back face, fixing in frame at site as per specification and drawing ; Complete all as specified and directed by Engineer-in-charge.
Dismantling structural steel work including doors, gates but excluding framed truss etc ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing framed work as door, chowkhats, and Grill gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs Helical door spring 300mm, ordinary rat tail rod pattern springs, including roller and roller plate fixed to iron chowkats with weilding ; Complete all as specified and directed by Engineer-in-charge.
Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paidfor separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Charge.
Supply and Fixing Sheet glass, 5.5mm thick ordinary quality, in squares, exceeding 0.50 sqm in each pane including rubber packing and aluminium beading panes as per instructions of manufacturer ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 5 mm thick PVC board both side prelaminated of any shadeas as in aluminium partition etc ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Brass mortice lock, 4 levers, verticle type, size 100 mm, ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour two coats of synthetic enamel painting on steel surfaces of any description over 10 cm in width or girth not otherwise described over a coat of red oxide primer including prepration of previously untreated surfaces ; Complete all as specified and directed by Engineer-in-charge.
Material and labour for preparation of old painted steel surfaces of any description, exceeding 10 CM width or grith and applying one coat of synthetic enamel paint ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing factory made 35 mm thick flush shutters solid core construction with block board core and plywood face panels ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour two coats of synthetic enamel painting on wooden surfaces of any description over 10 cm in width or girth not otherwise described above pink primer including prepration of previously untreated surfaces ; Complete all as specified and directed by Engineer-in-charge.
Material and labour for preparation of old painted wooden surfaces of any description, over 10 centimetre width or girth and applying one coat of synthetic enamel paint ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing clear glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty ; Complete all as specified and directed by Engineer-in-charge.
Hacking out old broken glass from wooden/steel window cleaning the surface and removing from the site, thenafter Supply and Fixing clear glass, 3mm thick ordinary quality, in any shape, not exceeding 0.50 sqm in each pane including and glazing with oil putty/wooden beading as per site requirements ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 300mm long Aluminium alloy, Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Aluminium, anodised, barrel tower bolts 150mm of extruded section and fixed ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 150mm long Aluminium handles, cast type anodised ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing stainless steel butt Hinges, 100mm size, medium weight, cold rolled mild steel ; Complete all as specified and directed by Engineer-in-charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 & ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing glazed ceramic coloured tiles 450x300mmx7mm thick, etc. on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering plaster in CM 1:4 on brick surface ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. over 15 mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs of Vitreous china wash down water closet pan( pedestal pattern), white with PVC(SWR) 'P' trap 110/110mm bore ; Complete all as specified and directed by Engineer-in-charge. Note:-Rate of supply for Flushing cistern, flush pipe, seat cover etc have been taken separately
Supply and Fixing in repairs 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve flote handle including bracket and flush pipe of polythylene of low or high density or PVC,32mm dia ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs Plastic water closet seat,white/ivory,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (Toilet Seat Cover) ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs PVC Jet spray suitable for EWC. ; Complete all as specified and directed by Engineer-in-charge.
Supply and fixing Chromium plated Health faucet in repairs with 1.5 metre long chain ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs vitreous China wash basin white,flat back size550x400mm including PTMT waste coupling 32mm bore,waste PVC pipe complete, CP brass Pillar Tap 15mm bore of fancy type ; Complete all as specified and directed by Engineer-in-charge.
Supply & Fixing rotational moulded polythene water storage tanks of 1000 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 including dismantling water tanks and supply and Fixing Ball valves high pressure PTMT with epoxy coated Aluminium rod & High density plastic ball screwed for iron pipe and fixed to GI pipe of 20mm bore ; Complete all as specified and directed by Engineer-in-charge.
All as per Srl Item no 59 above but of capacity 500Ltr.
Supply and Fixing 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including taking down ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs15mm bore Concealed type stop cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs15mm bore type angle cock cast copper alloy CP screwed down high pressure with crutch or butterfly handle ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs of brass cromium brass plated fancy type bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs Pillar taps 15mm bore, cast copper alloy , with capstan heads, chromium plated , screwed down high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe and fixed ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs 100mm dia CP grating with or without hinge type or hole type ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in rfepairs CP brass towel rail of 20mm dia and 600mm long ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing in repairs 125mm CP shower rose fancy type with CP arm ; Complete all as specified and directed by Engineer-in-charge.
Demolition reinforced roofs, floors (other than ground floors), beams staircases, landing, chajjas, manhole cover slab and similar suspended work (reinforcement cut as required to facilitate demolition) ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour Providing precast cement concrete type B1, 1:2:4 (20mm graded stone aggregate) in landings, cover slabs (for man holes etc.) chulla hoods, chajjas, ater troughs, mangers, shelves and similar articles with plain faces ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour Providing precast cement concrete type B1 1:2:4 (20mm graded stone agrregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bondersb(for stone wallin). corbels, brackets,etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for Providing precast cement concrete B0 1:2:4 (12.5mm graded stone agrregate)louvres and jallies, 40mm thick (measured solid), including all mould- ings but excluding frame ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for TMT Mild steel bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips ; Complete all as specified and directed by Engineer-in-charge.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for Granite (of any type) work (table rubbed and polished) 20mm thick in steps , jambs, pillars, window cills, cooking platforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for Machine cut Kota stone slab flooring 20-25 mm thick (size not less than 0.5 sqm each) over cement screed base of 15mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ; Complete all as specified and directed by Engineer-in-charge.
All as per srl Item No 78 here-in-before but as skirting/dado over rendering 15mm thick in CM 1:4.
Demolition of cement Concrete of any description and in any position not otherwise specifically provided for PCC roof padding etc ; Complete all as specified and directed by Engineer-in-charge.
Dismantling Brick tiles or terracing tiles, single layer on roofs , jointed and pointed in cement mortar complete all as specified & directed by the Engineer-in-Charge.
Material & labour for providing 50mm thick plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in roof padding and similar works including chamfers, weatherings,throating etc , with necessary Use & waste of flat Formwork ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for cleaning of dust & dirt , Removal of all loose existing bituminous material or with chipper & applying heat torch gun to get smooth plain finished surface. repairs all joints & cracks with Highly Elastic bituminous Cold applied Putty-Tarplast- having penetration after setting upto 8mm & confirming to IS 1580:1991. Any annular space between drain pipe and concrete should be filled with mortar admixed with ShaliSBR latex of STP Ltd. Making necessary Gola 75x75 mm with rich cement mortar admixed with ShaliSBR latex of STP Ltd at the interface of horizontal & Vertical junctions ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for Slightly damp the surface, avoid standing Water. Prime the surface with Tarfelt LM mixed with potable water in the ratio 1:1 and apply @ 400gm/sqm (as per surface condition). Allow the primer to touch dry in tacky position in open atmosphere. Thenafter apply 1st coat of Tarfelt LM (Liiquid membrane) having elongation 200% confirming to ASTM-C-412 & bridging of 8mm confirming to ASTM-C-836 with tensile strength after 7 days 0.5mm confirmin to ASTM-C-412 with no diluation of water on primed surface is still tacky with consumption of 0.7 kg/sqm. lay Geotex of 45 GSM/Fibre mesh simultaneously and paste it properly with overlap of 50mm. Allow the first coat to dry for 10-12Hrs. Apply 2nd coat of cured first coat with consumption @ 0.7kg/sqm in opposite dierction of first coat by Brush or roller. Sprinkle sand @ 200Gm P/Sqm while the coating is stick to facilitate plastering for protection screed. Allow it to dry for 10-12 hrs . Apply 3rd coat if required as per site reqirement. Providing & Laying minimum 50mm PCC in slope with welded wire mesh 1.5 mm as reinforcement and PCC admixed with Shallplast LW+ of STP Ltd (Integral Waterproofing compound) @200 ml per bag of cement on horizontal surface for mechanical protection over a separation layer of ShallGeo Textile 120 gsm in client Scope ; Complete all as specified and directed by Engineer-in-charge.
Taking down aluminium door shutters of area exc 1 sqm but n.exc 2 sqm each and replacement of necessary jointing cleats glazing clips, rubber packing, anodised aluminium snap beading screws etc and refixing in the same opening ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 18 mm thick PVC shutters one side prelaminated of any shade for cupbord shutter etc ; Complete all as specified and directed by Engineer-in-charge.
Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) in sub base of floor ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in flooring Finishing fair and even without using extra cement ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for 50mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate as in plinth protection Finishing fair and even ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & patternover and including 50mm thick compactedbed of fine sand, compacting and properembedding/ laying of inter locking paverblocks into the sand bedding layer throughvibratory compaction by using platevibrator, filling the joints with sand andcutting of paver blocks as per required sizeand pattern, finishing and sweeping extra sand ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for Chequered cement concrete tiles 30cm x 30cm x 22mm thick over and including 20mm thick bedding layer in cement mortar 1:6,set and jointed in neat cement slurry and pointed in grey cement and pigment to match the colour of tiles complete all as specified and directed by Engr-in-charge.
Dismantling Asbestos cement ( corrugated, semicorrugated ,etc.) sheets in roof coverings ; Complete all as specified and directed by Engineer-in-charge.
Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in concrete, brickwork or masonry and making good disturbed ground ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for Excavating in post holes( or similar holes) in soft/loose soil each n exc 0.5 cu.m. getting out and removing surplus soil to a distance n.exc 50 m and making good surface ; Complete all as specified and directed by Engineer-in-charge.
Material and Labour for Cement concrete type B2, 1:2:4 (40mm graded aggregate) in foundations, filling and mass concrete ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 24 ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws ; Complete all as specified and directed by Engineer-in-charge.
Dismantling wall and celing board any type and any thickness including cover fillets ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing plain gypsum board panels 12.5mm thick on ceiling with incl T sec, accories etc of glavanized steel all as per manufactures design conforming to IS 2095 and 2542(1981)wieght of board not less than 7 Kg/Sqm , including distempering / painting ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing UPVC hollow multichamber section polypan of size 200x10mm and average wall thickness of 1mm fixed over PVC fillet sheet at a spacing of n.exc 600mm ; Complete all as specified and directed by Engineer-in-charge.
Supply and Fixing 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed by Engr-In-charge.
ESS KAY BUILDER
amardeep traders
S S CONSTRUCTION COMPANY
m/s. gopal krishan
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .