Loading…
Loading…
Tender Value
₹10.8 Cr
EMD Value
₹21.6 L
Closing Date
25 Jun 2026, 3:00 pm
Construction of Shed for new twin tempering furnace at the New Axle Forge Complex. (Grid O'Q' 35A to O'Q' 43) inside factory premises of RWF.
W496RWFYNK1085
W496RWFYNK1085
Open
9 Months
Unknown (Unspecified Location)
₹0
₹21.6 L
4 Jun 2026
4 Jun 2026
11 Jun 2026
B1-Schedule B1 (PEB Shed)
Manufacture,supply transportation, painting & erection of all structural steel work and items required for completion of pre engineering shed including purlin rafter gantry girders, catwalk platform stairs frames fastners chequered plates, anchor bolts, Holding down bolts connection bolts and nuts etc as per proof checked design and drawings. the rate shall include 1 supply fastening cutting drilling handling rivetting welding with supply of electrodes rivet bolts and nuts bituminous washer supply of all materials tools and plants scaffolding staging complete in all respect. The rate is inclusive of all contractors materials all taxes including Excise duty CESS on ED and oher charges charged as levid as per provision laid down by the Central Government and frieght & transit insurance tool & plant labour lead lift taxes painting with 2 coats of synthetic enamel paint over a coat of red oxide primer etc complete. the contractor shall not claim any other charges other than the quoted rate for the successful completion of work.
Supply and fixing of air roof vent (twister type)-500 system i.e neck diameter of 500 mm. the roof air vent should have high quality ball bearing with a main body of rust proof aluminium materials and extraction rate of vent should be less than 4695 M3/hr the roof vent should have 2 designed to meet AS2428 1-1993 to wind speeds of approx 160KM/Hr or higher side and to entry of wind driven rain at a range of 2.5L/sec under cyclonic conditions. the rate quoted shall be inclusive of contractors materials scoffolding labours tools and plants lead and lift taxes etc complete. the roof vent shall be fixed such a way with a match to roof sheet profile and same should be ensured that joints should be leak proof arrangement.
Supply anf fixing hi-Tensite Bare Galvalume sheets for roofing with aluminium Zinc alloy (galvalume) 150gms per sqm total of both sides as per ASTMA 792 (or) AS1397 in roofing , ridges, bargo board etc. not less than 0.50 mm total thickness(overall). The materail shall have yeild strenghth of 550 MegaPascal (MPa) for sheets in roofing, ridges, bargo board etc wlth one crest width including lip as sieve lap and 150mm as longitudinai lap for each sheet with fixino accessiories like G J/L bolt with washers or galvanized self-drilling screws, cap and washers caps having EPDM (Ethylene Propyience Di-Monomer) washers. PVC caps of matching colour including all lead and lift and handling transportation, installation etc, as ger drawing and as directed by the by Engineer- incharge based on site condition. (Payement shall be made for laid area and no extra payment shall (be made for overlaps)
Supplying and fixing colour coated sheets of aluminium Zinc alloy (Galvalume) 150 gm per sqm for side sheeting, Total of both sides AZ 150 as per ASTMA792 or AS1397 for side cladding not less than 0.50 mm of coated thickness (overall). The material shall have yeild strength of 550 MegaPascal (MPa) for sheets in roofingwith one crest which including lip asside lap and 4 150mm as longitudinallap for each sheet with fixing accessiories like G J/L bolt with washers or galvanized selfdrilling screws, cap and washers caps having EPDM (Ethylene Propyience Di- Monomer) washers. PVC caps of matching colour including all lead and lift and handling transportation, installation etc, as ger drawing and as directed by the by Engineer-in-charge based on site condition. (Payement shall be made for laid area and no extra payment shall (be made for overlaps)
Supply and fixing poly carbonatecorrugate sheets of required size matching the proflic of roof with onecrest width including lip as side lapand 150mm as longitudinal lap foreach 5 sheet with fixing accessories likeGI-J/L bolts with washers/self-drillingscrews, cap and washers complete.the translucent sheets are made from3mm thick clear Polycarbonate sheetswith a light transmitting capacity of72% + 5% (Payment shall be madefor laid area and not extra paymentshall be made for over laps)
Fabrication , Supply & fixing of MSgalvanized gutter. strap 40mm X10mm Thick, 6 length. shape of suitboundary wall gutter & fixing withglazing runner/purlin at required levelfrom shop floor Level with necessarybolts, nuts, washers etc completeWith all contractors steel material,labour, tools, plants. load, lift, taxesetc complete. The rate quoted shallbe inclusive of drilling necessary" boltholes in the gutter strap.
Supply and fixing valley gutter bent to required shape, size and length asper drawing using Galvalume sheetscoated with aluminum Zinc alloy (Galvalume) 150gm per sqm, total ofboth side AZ 150 as per ASTMA 792(or) AS1397 not less than 0.50 mm.total coated thickness (overall) 7 dulycoating of Thickness 20 micron overprimer (finished side) back coat( backside) of 5 microns.The material shallhave healed strength of 550 megapascal(MPA) and fixing with GI seambolts/screws with washers includingall lead and lift and handingtransportation installation etc, as perdrawing as directed .by the Engineer-in Charge The rate is inclusive ofjointing the gutters with a minimumof 300mm lap and sealed with siliconscalant to make it water tight . NOTE:Minimum gutter length without jointshall be 6 mm except as directedengineer in charge.
Supply and fixing adjustable/fixedsteel louvers adjustable industrial steel louvers are 8 1000mm wide X100mm high. they are supplied complete with a galvanized steelmesh, blades and framing. They areto be made from the same materials,finish and colour as wall panels. Fixedsteel louvers shall be 1500mm wide X1000mm high.
Supply and laying of M.S HR pipe of 200mm dia 4mm thick as a bypass way to the downtake rainwater pipe, including supply and fitting of requisite specials i.e.Bends, long bends etc. 9 It also includes the required tools &plants, manpower, welding/drilling,core cutting whenever required.Suitable MS angle/channelsupports & heavy duty clamps atsuitable intervals (@ 1m apart) are to be provided. Work involves all incidental works including proper joining of pipe to the existing gutter & sealing the gaps with appropriate sealant etc. The workshall be carried out in all heightswith all safety measures & relevantPPE Kits.
Assembling and Erection of fabricated steel material with crane/derrick atsite with labour, equipment, T & P including site with riveting/weldingwith all temporary arrangementScaffolding etc. with contractor Men,materials etc. Complete at all heights
B2-Schedule B2 (Gantry Rail)
Drilling of hole in rail of any section and any UTS, manually (in emergencies only) with contractor's labours, tools & plants, consumables etc. for - 061211 - Hole of dia. 25mm and above
061190 - Cutting / cropping of rail of 52Kg 90 UTS, manually and perfectly vertical 2 with contractors labour hacksaw blade and tools & plant NOTE: 1.Manual cutting should be used only in emergencies with prior permission of sectional ADEN where machine cutting cannot be arranged in time. 2. Cutting of Rails with blade and forcing to part by using other means to break the rails is prohibited. 3.Rails should be cut right through hacksaw blades only. 061191 - On Cess
Providing , supply and fixing of RailFixtures including cutting andfabrication of Rail Fixtures as per thedrawing provided, erection ofdepartment supplied crane rails fromground level to gantry girder level(10 M height from GL), placing thecrane rails in proper alignment to thecentre line 3 of the Girder bymeasuring it to the proper gauge,carrying out welding work to fix theRail Fixtures and carrying outtightening of Rail Fixtures withnecessary nuts, bolts & washers. Alsothe necessary nuts, bolts andwashers will be supplied by thecontractor with the Rail Fixtures,fixing of department supplies fishplates etc. The rate quoted shall beinclusive of contractor's materials,labours, tools and plants, lead andlift, taxes etc complete Running
Lifting and Erection of Rails fromground level to Gantry Girder Level(Approx.9M) using heavy duty Industrial Crane. Placing the railson Gantry Girder and fixing theremoved existing Rail Fixtures &Fish Plates. The alignment of Rails,Gauge checking of Gantry Girderto be done.
B3-Schedule B3 (Lifeline Works)
Multi fix anchor plate/Extremity Plate/End Anchors with following specification: MOC- 1 SS316,Cable Tensioning:0.8 to 5.0 KN Net Weight : 1.5 Kgs Breaking Strength : 35 kn Operating Temperature :(-40 deg.C to +50 deg C)Make: 3M DBI ALA/INOVATIX/DELTAPLUS/UNICARE OR Equivalent
Hex swage stud, pass through or Cable Extremity with following specification: MOC- 2 SS 316-Used to terminate cable at one end of system and allows cable to pass through for tensioning prior to swaging, For use with 8mm,7 X 19/7X7 cable, Minimum Breaking Strength: 35kN Make: 3M DBI SALA/INOVATIX/DELTAPLUS/UNICARE OR Equivalent
Tension energy/Shock absorber with tension indicator & fall indicator with following specification:MOC-SS316 & System should have Energy Absorber with Built-in Tensioner for better stability & ensure adequate Safety to entire system & users. Built-in Tensioner should have tension 3 indicator like Green & Red Marking on the device to attain required tension of life Line, tension indicating spring, total elongation 0.16M. Maximum 4 users capacity, 6KN or 8KN peak force connecting device, dependent on system layout. Cable Tensioning : 5KN minimum breaking Strength :35 KN peak Deployment Force : 12 to 19 KN. Average Deployment Force: 12 to 16 Kn. Total elongation M:0.6M. Make : 3M DBI SALA/INOVATIX/DELTAPLUS/UNICARE OR Equivalent
8mm wire Rope/Cable of desired length as per the locations with following 4 specification : Stainless Steel 316 Cable 7X7/7X19 Permanent Horizontal Lifeline applications.7X19/7X7 Core stands - 8mm SS316 Cable Life Line .Minimum Breaking strength38.7 KN. Make : 3M DBI SALA/INOVATIX/DELTAPLUS/UNICARE OR Equivalent
8mm Cable Extremity/Hex Swage Toggle - with following specification : MOC - SS316- Used to terminate cable at one end of system. For use with 8mm 7X7/7X19.Minimum breaking Strength 35KN. Make : 3M DBI SALA/INOVATIX/DELTAPLUS/UNICARE OR Equivalent
Fabrication of side post for installing on existing steel structure/RCC structure- 6 Breaking Strength : 10 KN. Length:350mm to 550mm.Installation Type : To be welded on existing Steel Structure, for fixing on RCC structure, MS Plate 10mm thick shall be provided over existing RCC Structure and to be fixed with Anchoring bolts. Side post shall be welded over the MS plate.
Installation of lifeline system
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
NEFTFORM.pdf
ATTACHMENT
ANNEXURE-AtoE.pdf
ATTACHMENT
CheckList.pdf
ATTACHMENT
ANNEXURE-VIB.pdf
ATTACHMENT
CERTIFICATIONOFFAMILIARISATION.pdf
ATTACHMENT
ANNEXURE-I.pdf
ATTACHMENT
GCC_IndianRailways-April-2022.pdf
ATTACHMENT
Contractore-MBIR-WCMS_1.pdf
ATTACHMENT
RailwayBoardLetterDtd31-05-2023.pdf
ATTACHMENT
StandardTenderDocumentVersion2.1.pdf
ATTACHMENT
conservencycesscharges.pdf
ATTACHMENT
GCCAdvancecorrectionslips1to11.pdf
ATTACHMENT
Milestone_Chart_PEB_Shed_NAFC.pdf
ATTACHMENT
Scope_of_Work_PEB_Shed_NAFC.pdf
ATTACHMENT
Special_Conditions_PEB_Shed_NAFC_v2.pdf
ATTACHMENT
Download all tender documents and submit your bid