Construction and Furnishing of AEE Office, Jharsuguda District-Jharsuguda.

Earthwork for excavation of foundation in all kind of soil including dressing and levelling the bed and depositing the soil within the 1.5m initial lift and 50m initial lead including cost, conveyance, royalty and taxes of all materials and cost of all labour T & P required for the work, Labour Welfare Cess @1% etc. complete as per direction of the EIC.

Supplying, filling in foundatin and plinth with sand watered and rammed including cost, conveyance, taxes, royalty of sand, labour & T&P etc. complete as per specification and direction of the EIC.

Cement Concrete (1:4:8) by using 40 mm h.g. crusher broken chips including cost, conveyance, royalty and taxes of all materials and cost of all labour T&P required for the work etc. complete as per the direction of the EIC.

Cement Concrete (1:2:4) by using 12 mm h.g. crusher broken chips including cost, conveyance, royalty and taxes of all materials and cost of all labour T&P required for the work etc. complete as per the direction of the EIC.

Supplying MS round / deformed / tor steel reinforcement bars (of only manufacturing companies such as SAIL / RINL / TATA / JINDAL STEEL / SHYAM STEEL) (of approved grade) of required diameters of approved quality including straightening, cutting to size, bending, and binding, lifting and placing in position as per design, complete including cost of bars, binding wires 18 gauge, including cost of all materials , labour, conveyance, loading and unloading, taxes, cess, royalties. sundries, tools and plants etc. complete as per the direction of the EIC. (Linear measurement will be taken and quantity will be calculated on standard weight for all heights).

In Ground Floor

In First Floor

R.C.C. work of M-20 grade with 20mm and down grade black hard granite (crusherbroken) stone chips including hoisting and laying including cost, conveyance, royalty and taxes of all materials and cost of all labour T&P required for the work, labour welfare cess @1% etc. complete as per the direction of the EIC.

In Ground Floor

Column base, frustum, plinth band

Column and beam

Lintel

Sun shade and Chajja

Roof slab Main

Stairs

In First Floor

Column and beam

Lintel

Sun shade and Chajja

Roof slab Main

Stairs

Providing Fly Ash brick masonry work using 23cm X 11cm X 8cm (with dimensional tolerance of ± 2% ) having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:6 including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants, labour welfare cess @1% etc. complete as per the direction of the EIC.

In plinth and foundation

Superstructure in ground floor

Superstructure in first floor

Iron work wrought and put up in grated doors, windows and cage latrines per 1 Qntl complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction of the EIC.

In Ground Floor

In First Floor

6 mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry treatment complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC.

In Ground Floor

In First Floor-Inside

In First Floor-Outside

16 mm thick cement plaster in cement mortar (1:6) over brick work or stone work including punning etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work, labour welfare cess @1% etc. complete as per the direction of the EIC.

In Ground Floor

In First Floor

12 mm thick cement plaster in cement mortar (1:6) with watering and curing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per direction of the EIC.

In Ground Floor

In First Floor

Supplying, Fitting and fixing Vitrified tiles in Floors of size 600 mm x 600 mm of approved make conforming to IS13755 laid on 20 mm thick cement mortar [1:4] filling joined with white cement of approved quality icomplete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction for the EIC. [For New work only]

In Ground Floor

In First Floor

Fixing Kota tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC.

In Ground Floor

In First Floor

Fixing Kota tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction of the EIC.

In Ground Floor

In First Floor

Fixing Kota tiles in dados, skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC.

In Ground Floor

In First Floor

Fixing Kodappa Tiles of 10 mm thick in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC.

In Ground Floor

Fixing 20cmx30cm / 20cm x 20cm special plain /printed series ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess @1% etc. complete as per the direction of the EIC.

In Ground Floor

In First Floor

Fixing 20cmx30cm / 20cm x 20cm special plain /printed series ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm confirming to IS 13753 in dados, skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction of the EIC.

In Ground Floor

In First Floor

Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all fitting including cost of materials all taxes labour, T&P, labour welfare cess @1% etc. complete as per direction of EIC.

In Ground Floor

In First Floor

Supplying, fitting & fixing in position of PVC/FRP panel type single door shutter with chowkhat framed & fixed [with & put up] complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC.

In Ground Floor

In First Floor

Supplying, fitting, fixing up window (sliding type) made up aluminum Section 9778 as windows frame section No. 4095, 4096, 9777, 3994 as shutter frame with 5mm thick black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P, labour welafre cess @1% etc. complete as per direction of EIC.

In Ground Floor

In First Floor

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P, labour welfare cess @1% etc. required for the complete in all respect as per the direction of EIC.

In Ground Floor

In First Floor

Finishing surface of walls with Cement based wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, labour welfare cess @1% etc. complete as per the direction of the EIC.

In Ground Floor

In First Floor

Priming one coat to surface with Water Bound wall cement Primer complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, labour welfare cess @1% etc. complete as per the direction of the EIC.

In Ground Floor

In First Floor

Finishing walls with Distemper of approved shade on new work two coats to give an even shade including watering and curing complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC.

In Ground Floor

In First Floor

Cement washing 1 coat Per 1 Sqm. complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction of the EIC.

In Ground Floor

In First Floor

Finishing exterior walls with Weather Seal Coat Paint of approved shade on new work two coats to give an even shade complete including cost, conveyance and taxes of all materials and cost of all labour, labour welfare cess @1% etc. complete as per the direction of the EIC.

In Ground Floor

In First Floor

Painting 2 coat with any appproved paint on new steel work Per 1 Sqm to give an even shade including watering and curing complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC.

In Ground Floor

In First Floor

Provision for Staging & Overhead Tank

Supplying all materials, labour, T&P for fitting and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting up to a height of 5 metres above ground level and placing the tank to the required position on staging complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC.

Cost and conveyance of Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS: 12701-1996 icomplete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC.

Providing fitting, fixing of 160 mm dia rain water pipe of Schedule 40 [4 kg PSI] including fitted, fixed & mending to the holes provided at discharge point with necessary bends, shoes etc complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction for the EIC.

Reinforced Cement Concrete M20 grade 20mm & down graded size hard granite crusher broken chips of approved quality and from approved quarry including centring, shuttering, lowering, laying concrete, watering and curing etc. complete for required levels laid in layers including cost, conveyance, royalty and taxes of all materials and cost of labour, T&P,Labour Welfare cess @1% required for the work etc. complete as per specification and direction for the EIC.

Supplying MS round / deformed / tor steel reinforcement bars (of only manufacturing companies such as SAIL / RINL / TATA / JINDAL STEEL / SHYAM STEEL) (of approved grade) of required diameters of approved quality including straightening, cutting to size, bending, and binding, lifting and placing in position as per design, complete including cost of bars, binding wires 18 gauge, including cost of all materials , labour, conveyance, loading and unloading, taxes, cess, royalties. sundries, tools and plants etc. Labour Welfare cess @1% complete as per the direction of the EIC. (Linear measurement will be taken and quantity will be calculated on standard weight for all heights).

12 mm thick cement plaster in cement mortar (1:6) with watering and curing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC.

External PH & Sanitary Works

Earthwork in excavation of foundation in all kinds of soil within initial lead and initial lift including rough dressing and breaking rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3 m in depth including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work,Labour welfare cess@1% etc. complete as per the direction of the EIC.

Supplying, Filling sand in foundation & plinth well watered and rammed including cost, conveyance, taxes, royalty of sand, labour & T&P, Labour welfare cess@1% etc. complete as per specification and direction of the EIC.

Cement Concrete (1:4:8) by using 40 mm size hard granite crusher broken chips of approved quality and form approved quarry including lowering laying concrete, watering and curing etc. complete for required levels laid in layers including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work,Labour welfare cess@1% etc. complete as per the direction of the EIC.

Plain cment concrete (1:2:4) using 12 mm size hard granite crusher broken chips of approved quality and form approved quarry including lowering laying concrete, watering and curing etc. complete for required levels laid in layers including cost and conveyance, royalty & taxes of all materials and cost of all labour T&P required for the work,Labour welfare cess@1% etc. complete as per the direction of the EIC.

Reinforced Cement Concrete M20 grade 20mm & down graded size hard granite crusher broken chips of approved quality and from approved quarry including centring, shuttering, lowering, laying concrete, watering and curing etc. complete for required levels laid in layers including cost, conveyance, royalty and taxes of all materials and cost of labour, T&P,Labour Welfare cess @1% required for the work etc. complete as per specification and direction for the EIC.

Supplying MS round / deformed / tor steel reinforcement bars (of only manufacturing companies such as SAIL / RINL / TATA / JINDAL STEEL / SHYAM STEEL) (of approved grade) of required diameters of approved quality including straightening, cutting to size, bending, and binding, lifting and placing in position as per design, complete including cost of bars, binding wires 18 gauge, including cost of all materials , labour, conveyance, loading and unloading, taxes, cess, royalties. sundries, tools and plants etc. Labour Welfare cess @1% complete as per the direction of the EIC. (Linear measurement will be taken and quantity will be calculated on standard weight for all heights).

Bed Block

Providing Fly Ash brick masonry work using 230 mm X 110 mm X 80 mm (with dimensional tolerance of ± 2% ) Fly Ash bricks having crushing strength not less than 75 kg. / sq cm, mortar of mix 1:6 (1 cement : 6 sand) (Using Branded Cement), immersing the bricks for minimum 6 hrs in water before use, with all necessary projections, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading and unloading, taxes, cess, royalties, scaffolding, watering, curing, sundries, tools and plants,etc., Labour Welfare cess @1% complete as per the direction of the EIC.

12 mm thick cement plaster in cement mortar (1:6) with watering and curing etc. complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC.

Cement punning including watering and curing complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC.

Septic tank

Over 12 mm thick cement plaster [1:4] as per Item No. 8

Supply, fixing of RCC pre-castrings of 0.9 m dia, 0.3 m height, 0.050 m wall thickness in soak pit complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC.

10 cm thick dry brick khoa backing in soakpit complete including cost, conveyance, royalty and taxes of all materials and cost of all labour with T&P required for the work ,Labour welfare cess@1% etc. complete as per the direction for the EIC.

Soak Pit [2 No.]

Supplying all materials, labour, T&P and constricting inspection Chamber of inside size 760mmx760mmx460mm with cement(1:3:6)using 40mm size crusher broken hard black granite metal on bed, KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips, 12mm thick cement plaster (1:3) with cement punning to inside, cement flush pointing (1:3) to outside R.C.C cover slab (1;2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, cost of all materials, conveyance of all materials to worksite, payment of royalty, all taxes etc all complete as per approved drawing P.H specification and direction of Engineer-in-charge. [Inside size 76cm x76 cmx 46cm with 18” dia RCC MH cover]

Supplying all materials, labour, T&P and constructing gully trap chamber of inside ‘size 250 mm x 250mm with 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken in HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinth and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCL gully trap, 150mmx150mm size Cl grating etc, all complete as per drawing, specification and direction of Engineer-in-charge

PH & Sanitary Works

In Ground Floor

Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion complete as per specification and direction of the EIC.

110mm dia UPVC single socketed pipe

110mm UPVC Plain bend

110mm UPVC Plain shoe

110mm UPVC Plain tee

110mm UPVC Coupler

Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Schedule-80) of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the EIC.

15 mm diameter PVC Sch-80 Pipe

25 mm diameter PVC Sch-80 Pipe

40 mm diameter PVC Sch-80 Pipe

Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3- 2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification and direction of the EIC.

580 mm x 440mm size white glazed Vitreous China Orissa Pattern squatting pan

Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. (Seat and cover to be measured and paid for separately) as per the direction of the EIC.

White Vitreous China EWC Pattern with 'P' trap

Fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification and direction of the EIC.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete as per specification and direction of the EIC.

Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal of 430x260x350 mm or 340x410x265 mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the EIC.

Vitreous China - Flat Back Urinal of 430mm x260mm x350mm size

Fixing glazed earthenware squatting plate of size 600mm x 350mm conforming to IS:2556 Part-6-1995 with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard granite metal all complete as per specification and direction of the EIC.

One-seated Urinal 1m x 0.50m x 0.15m size

Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the EIC.

Vitreous china flat back wash basin 550x400 mm

Fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of the following nominal bore complete as per specification and direction of the EIC.

15mm dia CP pillar cock elbow action

Fixing Chromium Plated Brass Shower rose with 15mm or 20mm inlet including polishing all complete as per specification and direction of the EIC.

15mm dia CP revolving shower

15mm dia CP telephonic shower

Fixing standard sized glass-shelf with Chromium Plated brass brackets and guard rails complete, fixed to woden plugs with Chromium Plated brass screws as per specification and direction of the EIC.

Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification and direction of the EIC.

25mmx600mm long CP towel rail

Fixing of Brass Screw-down Bib Cocks (Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per specification and diretion of the EIC.

15mm dia CP Brass short body Bib Cock

15mm dia CP Brass long body Bib Cock

Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification and direction of the EIC.

600mm x 450mm bevelled edge mirror

In First Floor

Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion complete as per specification and direction of the EIC.

110mm dia UPVC single socketed pipe

110mm UPVC Plain bend

110mm UPVC Plain tee

110mm UPVC Coupler

Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/89 (Schedule-80) of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the EIC.

15 mm diameter PVC Sch-80 Pipe

25 mm diameter PVC Sch-80 Pipe

40 mm diameter PVC Sch-80 Pipe

Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3- 2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification and direction of the EIC.

580 mm x 440mm size white glazed Vitreous China Orissa Pattern squatting pan

Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. (Seat and cover to be measured and paid for separately) as per the direction of the EIC.

White Vitreous China EWC Pattern with 'P' trap

Fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification and direction of the EIC.

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete as per specification and direction of the EIC.

Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal of 430x260x350 mm or 340x410x265 mm sizes respectively with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the EIC.

Vitreous China - Flat Back Urinal of 430mm x260mm x350mm size

Fixing glazed earthenware squatting plate of size 600mm x 350mm conforming to IS:2556 Part-6-1995 with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:4:8) using 40mm hard granite metal all complete as per specification and direction of the EIC.

One-seated Urinal 1m x 0.50m x 0.15m size

Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification and direction of the EIC.

Vitreous china flat back wash basin 550x400 mm

Fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of the following nominal bore complete as per specification and direction of the EIC.

15mm dia CP pillar cock elbow action

Fixing standard sized glass-shelf with Chromium Plated brass brackets and guard rails complete, fixed to woden plugs with Chromium Plated brass screws as per specification and direction of the EIC.

Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification and direction of the EIC.

25mmx600mm long CP towel rail

Fixing Chromium Plated Brass Shower rose with 15mm or 20mm inlet including polishing all complete as per specification and direction of the EIC.

15mm dia CP revolving shower

15mm dia CP telephonic shower

Fixing of Brass Screw-down Bib Cocks (Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per specification and diretion of the EIC.

15mm dia CP Brass short body Bib Cock

15mm dia CP Brass long body Bib Cock

Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification and direction of the EIC.

600mm x 450mm bevelled edge mirror

Internal Electrification

In Ground Floor

Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection etc. complete as per direction of the EIC. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )

Recessed wiring for light / power plug with 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit alongwith 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing as required. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )

Recessed wiring for light / power plug with 2 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit alongwith 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing as required. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )

Recessed wiring for light / power plug with 4 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit alongwith 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing as required. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )

Supplying and fixing of 16 / 18 SWG metal box of following sizes (nominal size) on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.

180 mm x 100 mm x 60 mm deep MS Box

Supplying and fixing of following piano type switch / socket on the existing switch box / cover including connections etc as required as per direction of the EIC.

S.P. 3 pin 5 / 6 amp socket out let piano type (Make-Anchor / Cona)

S.P. 6 pin 15/16 amp socket out let piano type (Make-Anchor / Cona)

S.P. 5 / 6 amp one way switch piano type (Make-Anchor / Cona)

S.P. 15 / 16 amp two way switch piano type (Make-Anchor / Cona)

Supplying and fixing of metal box of 180 mm x 100 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc as required as per direction of the EIC.(For light plugs to be used in non residential buildings)

Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required as per direction of the EIC.

Supplying and fixing of 3 pin, 5 amp ceiling rose ISI marked on the existing junction box / wooden block including connection etc. as required as per direction of the EIC.

Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required as per direction of the EIC.

Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR)

Supply and fixing of 5 amp to 32 amp rating 240 V "B" series DP miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC.

Supply and fixing of 5 amp to 32 amp rating 240 V "C" series SPN miniature circuit breaker suitable for inductive loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required including cost of all materials and cost of all labour with T&P required for the work, labour welfare cess @1% etc. complete as per the direction of the EIC.

Supply, Installation, Testing, and Commissioning of 32 Amp DP Main switches of following capacity (IS 13940 Part 3/1993 ) on existing surface / wall mountnting and complete with HRC Fuse links, interconnections, earthing, etc. complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction of the EIC. Make- SEIMENS /HPL /ANCHOR /L&T /HAVELS /C & S/ RK

Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction of the EIC.

Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction of the EIC.

Installation, testing and commissioning of exhaust fan up to 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction of the EIC.

Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting of all sizes complete with all accessories and tube etc. directly on ceiling wall, including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required. complete as per the direction of the EIC.

Supplying and fixing LED Bulb ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC.

18 Watt LED Bulb

23 Watt LED Bulb

Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc. with charcoal and salt as required as per direction of the EIC.

Provision for site clearance & external electrifications

In First Floor

Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection etc. complete as per direction of the EIC. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )

Recessed wiring for light / power plug with 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit alongwith 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing as required. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )

Recessed wiring for light / power plug with 2 x 4.0 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit alongwith 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing as required. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard )

Supplying and fixing of 16 / 18 SWG metal box of following sizes (nominal size) on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.

180 mm x 100 mm x 60 mm deep MS Box

Supplying and fixing of following piano type switch / socket on the existing switch box / cover including connections etc as required as per direction of the EIC.

S.P. 3 pin 5 / 6 amp socket out let piano type (Make-Anchor / Cona)

S.P. 6 pin 15/16 amp socket out let piano type (Make-Anchor / Cona)

S.P. 5 / 6 amp one way switch piano type (Make-Anchor / Cona)

S.P. 15 / 16 amp two way switch piano type (Make-Anchor / Cona)

Supplying and fixing of metal box of 180 mm x 100 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 5 pin 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc as required as per direction of the EIC.(For light plugs to be used in non residential buildings)

Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required as per direction of the EIC.

Supplying and fixing of 3 pin, 5 amp ceiling rose ISI marked on the existing junction box / wooden block including connection etc. as required as per direction of the EIC.

Supplying and fixing of Call Bell / Buzzer ISI marked suitable for DC /AC single phase 230 volts complete as required as per direction of the EIC.

Supply and fixing of single pole MCB with sheet steel enclosure, distribution board, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required ( But with out MCB/ RCCB/ ISOLATOR)

Supply and fixing of 5 amp to 32 amp rating 240 V "B" series DP miniature circuit breaker suitable for lighting and other loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC.

Supply and fixing of 5 amp to 32 amp rating 240 V "C" series SPN miniature circuit breaker suitable for inductive loads of the following poles in the existing MCB DB ISI marked complete with connections testing and commissioning etc. as required including cost of all materials and cost of all labour with T&P required for the work, labour welfare cess @1% etc. complete as per the direction of the EIC.

Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction of the EIC.

Installation, Testing and Commissioning of resistance type ceiling fan regulator, in existing switch box including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor, earthing the regulator as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction of the EIC.

Installation, testing and commissioning of exhaust fan up to 450 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage complete, connection, etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work, Labour welfare cess@1% etc. complete as per the direction of the EIC.

Installation, Testing and Commissioning of pre-wired fluorescent fiiting / compact fluorescent fitting of all sizes complete with all accessories and tube etc. directly on ceiling wall, including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required. complete as per the direction of the EIC.

Supplying and fixing LED Bulb ISI marked including connection etc. as required complete including cost, conveyance and taxes of all materials and cost of all labour with T&P required for the work etc. complete as per the direction of the EIC.

18 Watt LED Bulb

23 Watt LED Bulb

Provision of Borewell

Supplying all materials, labour, T&P and sinking of bore well (125mm x 100mm) size as per following specification and direction of Engineer-in-charge.

Supplying all labour, T&P and drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (650 cfm/ 200 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 125 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well).

Labour for drilling of 125x100 mm dia bore(Provisional)

Supplying all materials, labour, T&P and Lowering the following size G.I/ PVC pipes with or without slotted pipes as per the necessity from ground level and fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc. complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above.

For lowering of 125 mm dia PVC/GI Casing Pipes

Supplying all labour, T&P and Cleaning and developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of Engineer-in-Charge.

Supplying,installating,testing ,commissioing of 1 set of Single phase electrical driven submersible pump with control panel of reputed ISI make having discharge of 1.00 LPS and head of 50.00 mtr including cost of pump set , conveyance, contractor profit & labour cess etc all complete as per specification

Supplying, installation, testing of 2.25sqmm cable suitable for 1.00 HP motor of reputed make including cost of motor, conveyance etc all complete .

Supplying all materials,labour,T&P and lowering of 32mm dia HDPE pipe with supply of long (10kg/cm²) in to the bore well & labour cess etc all complete (32mm(1'') dia

Supplying all materials, labour,T&P and providing ,fitting,fixing 6mm² wire rope & lowering with pump & motor including labour cess etc all complete

Supplying all material, labour,T&p and providing ,fitting,fixing of following dia & sizes fixtures for bore well including labour cess etc all complete as per the direction of Engineer-in-charge.

Pipe Clamp suitable for 25mm dia HDPE Pipe

Pipe Clamp suitable for Bore well

Bore Cap suitable for 125mm dia Bore

25mm dia Steel Nipple With Steel Nut & bolt (Heavy Duty)

25mm dia G.I. Socket(ISI Marked) Heavy Duty

25mm dia G.I. Union(ISIMarked) Heavy Duty

25mm x 300mm long G.I. Short piece

25mm G.I. Elbow(Heavy Duty)

Provision for providing and fixing Water Purifier/ Aquagruard of approved make (i.e. Kent, Eureka Forbes, Blue Star, HUL Pureit etc.)including fitting and fixing in posiotion with all acessories as per the direction of the EIC.

Provision for providing, installing, testing and commissioning of inverter with battery for light/fan/computer of approved make and model as per the direction of the EIC.

Provision for supply of 1.0 to 1.5 ton AC of reputed make and model(Godrej/Voltas/Harier/Hitachi/Haier et.) complete including cost of conveyance, labour for fixing, loading unloading etc as per direction of the EIC.

Provision for supply of Office Furnitures of approved specification/ branded/ reputed manufacture including cost of transporting, loading, unloading, packaging etc.

Please Enable Macros to View BoQ information