CA NO GE(H)-29/2024-25 REPAIR TO FENCING, DRAIN, FOOT PATHS, IN OTM ACCN IN THE AOR OF AGE B/R-II UNDER GE HISAR MIL STN

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion embedded in concrete, brick work, masonry etc. and making good disturbed ground all as directed.

Dismantling fencing / steel barbed wire of any type of any description fixed to any type of fencing posts.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil.

M&L PCC 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and mass concrete.

M&L for cement concrete 1:3:6 type C1, using 20mm graded crushed stone aggregate as in bed plate or mud stops, rounded or chamfered on edges all as specified.

M&L mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Gde E-165 (Fe 290) all as specified and directed.

S&F mild steel round bars as in tie bars fixed to fencing posts including cut to length, bent to shape, welding of bar at spots as directed and other similar works, conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

Fixing only mild steel galvanized chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire. Note :- Supply only chain link fencing shall be measured and paid for separately.

Supply only mild steel galvanized chain link fencing any size or type as directed complete all as specified. Note:- 1. Weight per Kg of chain link fencing shall be ascertained by convening BOO ordered by Accepting Officer, 2. Flat iron, round bars, nut bolts and washer shall be measured and paid for separately under respective items.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm bot not exc 10cm long and dia of neck not less than 10mm complete all as specified.

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer complete all as specified and directed.

M&L for preparation of new steel, concrete, brick, and iron surfaces of any description over 10 cm in width or girth and applying two coats of black bituminous paint complete all as specified and directed.

M & L for preparing old brick, stone, asbestos cement or plastered surfaces, concrete surfaces (Kerb Stone Painting) of any description over 10cm width or girth and applying two coats of synthetic enamel paint of any tint etc complete all as specified and as directed.

Demolition of brick/stone masonry built in cement/lime mortar of any mix and stacking serviceable stones aside for reuse & removing unserviceable materials in low laying area, complete, all as directed.

M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified

M&L brick work with subclass 'B' old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified

M & L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement including mixed with and including liquid water proofing compound @200 ML per 50 KG by weight of cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint on walls over a coat of primer all as specified & as directed.

Raking out joints/pointing to brick work or brick tiles, laid flat, in floors, surface channels, roofs, etc all as specified.

M&L Flush pointing in cement mortar (1:4) to bricks wall etc all as specified.

M & L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement including mixed with and including liquid water proofing compound @200 ML per 50 KG by weight of cement including taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etccomplete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as directed.

M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface all as directed.

M&L for 75mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified.

M&L factory made 60mm thick machine pressed precast cement concrete interlocking paver blocks of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and no pigment laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as Specified & directed.

M&L for factory made chequered cement concrete tiles, 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement & no pigment, over & including 15mm thick screed bed in cement & sand mortar 1:6, complete, all as specified & as directed

M&L for factory made rubber moulded coloured paver tiles (Industrial grade i.e Johnson Endura or equivalent) 300x300mm in size (flexural strength not less than 38 N/sqmm and thickness not less than 10mm) conforming to IS 4457 over & including 20mm thick screed bed in cement & sand mortar 1:4, complete, all as specified & as directed.

M&L Sand filling under floor or in foundation including watering and consolidation complete all as specified and as directed

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. complete, all as directed.

DHARMA CONSTRUCTION (BID ID -3107520)

M/S RAJESH KUMAR & SONS (BID ID -3108776)

M/S D.N Choudhary (BID ID -3120754)

J V BUILDER AND UTILITIES (BID ID -3119330)

Balaji Construction Co. (BID ID -3103925)

S K BUILDERS (BID ID -3106477)

OM CONSTRUCTION CO. (BID ID -3108284)

SHRI HARI BUILDERS (BID ID -3122385)