Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 17 A SHYAMA JI PURAM I I T SOCIETY IIT KALYANPUR KANPUR UTTAR PRADESH 208016 | KANPUR NAGAR | UTTAR PRADESH | 208016 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
₹15 L
EMD Value
₹15,000
Closing Date
10 Dec 2024, 3:00 pmClosed
BDO(BP)
BDO Office, Kadayampatti
Construction of 30000 liter over head tank and new borewell and powepump at sesampattyan colony area H/o Bommiampatty Panchayat Kadayampatti Block at Salem District MLACDS - 2024-2025
2024_RDTN_505854_1
Roc.No.1444/2024/A3
Open Tender
Civil Works
Item Wise
120 days
BDO Office, Kadayampatti
As Per Tender Document
3 documents required · 3 mandatory
₹0
₹15,000
17 Dec 2024
29 Nov 2024
10 Dec 2024
29 Nov 2024
10 Dec 2024
29 Nov 2024
Amount
1.) Construction of 30000 liter over head tank and new borewell and powepump at sesampattyan colony area. H/O BOMMIYAMPATTI
Earth work excavation & Depositing on bank with Initial lead of 10m and lift & 2m in hard stiff clay, stiff black cotton hard red earth shales, murram, gravel stoney earth and earth mixed with small size boulder and in hard gravelly soils per SS 20B Including all other incidental charges such as slurring strutting, baling out water forming, protective bunds etc., complete for foundation.
Refilling the basement with excavated earth other than sand complying the Standard specification
Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete
Supplying and erecting centering are strutting including neceassary supports for place surface for RCCcolumns fottings and pedestal beems crtitical pears erc., using mild steel angles of sizes 90x60x10cm gauge stiffness welded mild steel angles of sizes 25x25x3mm for boarding laying over silver oak joists of single 10cm -6.5cm space of 75cm centre to centre complete complying with standard specificatinon
Below G.L
G.L to 3.30m
Floor slab @ 7.14m
Cover slab @ 10.25m
Curved surface
Square Columns
Below ground level
For column, G.L. brace beam top to Middle brace beam bottom - (0.00 to 3.30)
Middle brace beam Top to Grid beam bottom (3.60-6.84)
Supplying and fabricating and placing inposition mild steel or Ribbed Tor Steel for all reinforced cement concrte works as per the design given incuding cost of steel and binding wire in all floor etc. complete complying with standard specification (MS rods or RTS bars will be supplied departmentally at section stores and cost will be recovered at issue rate). The binding wire will be supplied by the contractor as per clause MOST specification.
Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete Deck Slab
1.50m to 4.5m below GL
0 to 1.5m below GL
Above GL 0m to 4.5m
4.5m to 7.32m from Above GL
7.33m to 10.98m from Above GL
Painting two coats with approved Cement Paint over one coat of Primaring coat of Cement Paint over cement plastered wall surface, ceiling and other new surface including cleaning, preparing the surface, curing, scaffolding charges etc., complete complying
Providing manhole cover of size 0.60 m X 0.60 m in RCC 1: 1.5:3 with suitable reinforcement and 5O x 5O x 6mm MS angle fixed along edges etc., complete.,
Providing and fixing of RCC inner access ladder in RCC 1:1.5:3 (one cement, one and half sane! and three aggregates) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centering shuttering charges, mixing concrete curing etc., to required height and clear width of 4Scm consisting of two Nos. of ve~ical post of 10cm x lScm and step slab of 25mm x 25mm etc., complete.
FabricatFabrication, supply, delivery and fixing of outside MS ladder of 45cm wide made out Fabrication, supply, delivery and fixing of outside MS ladder of 45cm wide made out of 50x50x6mm MS angle for sides and steps in 16mm MS plain rods fixed at 30cm centre to centre welded, jointed etc., providing with suitable side supports, clamps, and locking arrangements provided with one coat of red oxide paint for providing access to roof top of OHT of suitable inclined length, including bottom anchorage and transportation etc., complete.,
Providing Pipe Connection arrangement to Inlet and outlet and Overflow pipe & gunmetal gatevalves including Specils etc,
50 mm GI Pipe
50mm GM Gate Valve
Flange set 50mm
GI elbow 50mm
GI Coupling 50mm
Geo physical investigation charges including preparation of geo physical summery report etc.,
Drilling of 150 mm dia bore Well in hard area including labour charges for inserting the casing pipe in the overburden soil area and developing charges etc complete including with bore welll cover
Upto casing pipe depth
Above casing pipe depth
Above casing pipe depth
Supply and delivery of Three phase 7.50 hp submercible Pump Set 50X225 lpm.
Provision for 4.00 sqmm 3core flat cable for Three phase 7.50 hp submercible Pump Set
Supply and delivery of 40mm GI Pipe as per BIS Standarad.
Supply and delivery of 40mm GI Coupling
Supply and delivery of 40mm GI Elbow
Supply and delivery of 40mm GI NRV
Supply and delivery of MS Clamp set
Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of Pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the Pumpset and trail run for 10 days.
Supply of panel board on Three phase 3.00hp submercible Pump Set.
Earth work excavation and deposting on bank with an initial lead of 10m & lift of 2m for pipe laying works with standard trench width and depth etc., complete
Supply and delivery of 63mm OD 6 KSC PVC Pipe as per ISI Marked Standarad specification.
Supply and delivery of 63mm PVC FTA
Supply and delivery of 63mm PVC Elbow
Supply and delivery of 63mm PVC Tee
Supply and delivery of 63mm PVC gate valve
Lowering PVC pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste.
Refilling the excavated earth as per the standard specifications
Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,(1000 liter)
Construction of Pedestal to Brick work in CM1:5 mix With plastering CM 1:5,12mm thick FOR 1000 LITER HDPE tank
Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,
Construction of Pedestal to Brick work in CM1:5 mix With plastering CM 1:5,12mm thick size of 1.20X0.90 X 1.50m for MS Kiosk.
Provision for TNED service connection deposit amount
Fuse carier 32A (500v)
Tw plank of size 600x450x19mm with supplying reepeer of 1inch thikness on both side with painting and bolt,nut, washer
7/20 gi bearer wire for service connection mains SD 64
25mm GI pipe
GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}
Krishna and Co (BID ID -1203517)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .