11/EUDC-IN/2025-26

Amount

Safe carriage, loading and unloading of following material from ESC Lucknow in work site J.E. dump store

Line Material

PCC Pole 8.5/9 Mtr long.

S.T.P. Pole 9/11 Mtr. Long

Carriage of all size O/D I/D S/T from ESC Daliganj Store

Fresh Tranformer Oil Drum

Carriage of Scrap Material from JE Store to Lesa Store

Repairing of damage/Rusted Steel Tubular Pole by digging of pit up to2 for proper position, Putting 3 Nos. Angle From of size 35x35x6 mm, 3 Long properly welding on 3 circle with pole than Grouting and Plinthing 300 mm Above level with cement concrete and sand and bricks ballast, (All material, labour and T&P will be provided by the Contractor)

Carriage of used PCC Pole/ST Pole from dumping yard to work site including loading and unloading at both ends.

Opening and dismantling of all the wire and accessories from tilted ST/PCC pole and digging the pit for Strengthening of existing tilted support of HT/LT lines after strengthening of tilted pole fixing of all accessories and re-stringing of old HT/LT line with help of T&P.

Dragging of ST/PCC Pole to pit site, digging of pit erection and grouting (As per RESPO Norms) of 11 KV line with fixing of necessary item, such as V-type X-arm, F-bracket, 11 KV Pin insulator, Guarding angle (1.8 mm 65x65x6) with Nut & bolts its ramming as per RESSPO Specification. Only Pole and insulator will be Provided by the Department.

Dragging of ST/PCC Pole from Dump Store to pit site, digging of pit erection and grouting (As per RESPO Norms) of LT support suitable for laying of ABC Line on 8.5 Mtr Long PCC Pole by providing of necessary eye hook/Lt Shackle insulator with Clamps and its accessories etc. as per RESSPO Specification. Only Pole will be Provided by the Department.

Repairing of damage Wiremess fencing of 11/0.4 KV S/S and of all 33 KV S/S, 3 meter fabrication 55x55x5 mm angel the frame. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. (All material, labour and T&P will be provided by the Contractor)

Re sagging of Damage L.T/ ABC Line, opening of ABC at service point from distribution box and opening of Consumer service cable after Re- sagging of ABC Re Connection of Consumer Service cable on ST Pole/PCC . (All the material will be arranged by the Contractor)

Painting of ST pole with one coat of red oxide & two coats of best quality top 2 mtr PO Red paint and remaining Al. Paint ISI mark as per RESPO norms.

Lopping & Chopping of tree branches for clearance of HT/LT line. After clearance of line through out pieces of tree branches of site.

Disconnection and reconnection of consumers service connection of including GI wire (per 40mtr)

Repairing of LT Fuse Set with cement, bricks and angle

P.S. ENTERPRISES (BID ID -5164205)