SPECIAL REPAIR TO BUILDING NO TS 72,TS 422,TS 31,PS

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc 1.50 sqm each and removing from site.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.50 sqm eachand n exc 4 sqm and removing from site.

Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles.

Demolition of cement concrete (unreinforced) in ground floors and paving not exc 15cm thickness.

Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc.

100mm long butt hinges (medium weight) colled rolled mild steel fixed with welding.

Extruded aluminium alloy handles fabricated type anodised of size 125mm long 12mm dia.

250mm long aluminium alloy, anodized sliding door bolt with hasp stapple ( bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

Aluminium anodized 200mm long barrel tower bolt of extruded section and fixed.

S & F Box type Steel ventilators top hung double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain PVC sheets for top rail lock rail and bottom rail on either side and as gap insert for top rail and bottom rail penelling of plain colour PVC sheetto be fitted in the MS frame welded/sealed to the styles and rails with suitablePVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawings.

S & F Galvanised mild steel wire cloth 0.457mm nominal dia of wire and average width of aperture 1.18mm dia and fixed with tinned tacks or galvanised mild steel staples

Sheet glass 3.00mm thick ordinary quality and glazing with oil putty complete all as specified and directed.

Brick work with sub class “B” bricks straight or curved on plan exc 6M mean radius build in CM 1:6 using all as specified using old size bricks

Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement all as specified.

M&L for Rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement .

Supply only integral water proofing compound.

Applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surfaces any description, not otherwise described over 10 cm width or girth including preparation of surfaces.

Preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.

Preparation of new/old plastered surfaces of wall and applying three coats of white washing, all as specified.

Preparation of new plastered surfaces of ceiling and applying three coats of white washing, all as specified.

Non-skid coloured tiles 400x400x7mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 25mm thick PCC (1:2:4) type B1, over screed bed or beddding layer of CM 1:4, 15 mm thick including including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) , removing serviceable tile to store and rubbish off the premises complete all as specified.

Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 15mm cement rendering in cement mortar 1:4, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) , removing serviceable tile to store and rubbish off the premises complete all as specified.

Rotational moulded polyethene water storage tank 1000 ltr capacity hoisted and fixed in position including PVC float valve 20 mm bore and including dismantling of existing water storage tank complete.

Taking up or down steel tubing and connections including cleaning for refixing or removal to store upto 25mm bore.

15mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs.

20mm bore GI tubing (medium grade) with all fittings and fixed complete to walls and ceiling or laid in floors/roofs.

Shower rose brass chrominium plated 125mm size complete all as specified and directed.

15mm bore fancy type bib tap brass CP (Long body) with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.

S&F Cast copper alloy CP stop cock /angle Valve fancy type screwed both ends for iron pipe 15mm dia/ bore of pipe

Stop valves ,cast copper alloy ,screwed down high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for union 20mm dia

CP Pillar taps, fancy type cast copper alloy, with capstan heads, screwed down high pressure, screwed for iron pipe and fixed.

Soap dish PTMT fixed with including chromium plated brass screws and wooden/plastic cleats ( Minimum weight 105gm).

Towel rail 600mm long of PTMT fixed with including chromium plated brass screws and wooden/plastic cleats ( Minimum weight 190gm).

Vitreous china squatting pan “ORISSA” pattern size 630x450mm ( Make : Hindware)white with integral foot rests all as fixed in repairs including cast iron ‘P’ or ‘S’ trap 100mm bore including PVC low level cistern of 10 litres capacity including brackets jointing to flush pipe, PVC connection (450x15mm), flushing pipe complete fixed in repair all as directed by Engr-in-Charge.

Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 100mm.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 110mm bore.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 110mm bore.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for 75mm bore.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor for 75mm bore.

S&F PVC (SWR) Bends any radius for 110mm bore.

S&F PVC (SWR) Bends any radius for 75mm bore with oval access door.

S&F PVC (SWR) Branch pieces single( Single Y) equal or unequal) for 110mm bore with oval access doors.

S&F PVC (SWR) Branch pieces single ( Single Y) equal or unequal for 75mm bore with oval access doors.

S&F PVC (SWR) floor trap with grating including jointing to waste pipe in solvent for 75mm bore including CP grating cover with or without hole complete.

PCC 1:3:6 C-1 (using 20mm graded crushed stone aggregate) as in plinth protection ( 75mm thick ) finished even and fair without using extra cement all as specified.

M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) with average thickness 50 mm laid in two layers of 25 mm thickness each with wire netting of 0.60 mm dia and size of mesh 12 mm x 12 mm laid between the two layers finished even and smoothes in roof padding all as specified and as directed Note:- The wire mesh shall be measured and paid separately under the respective item below.

Supply only 25 mm size, wire netting of galvanized iron chicken mesh, 0.71 mm dia complete all as specified and directed.

Preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove toremove all loose dirt/dust and applying roof treatment as below:-- (i) Applying a coat of bitumen primer membrane 0.4ltr/sqm by the same membrane manufacturer of density at 25 degree C’ 0.87-0.89Kg/Litre and viscosity 70-160 CPS till the surface properly impregnates and insolvent oil primer evaporates completely. (ii) Applying a coat of blown 85/25 graded bitumen conforming to IS 702 @ 1.2 Kg/sqm. (iiI) Applying Polymeric Polypropylene polymer membrane “APP” (Atactic poly propylene polymer ) modified prefabricated five layer 3mm thick not less than 3.6 Kg/Sqm with 160 grams/sqm non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 overlap in length using butane torch with 10cm over laps which shall be thermo fused by flame (iv) Applying course of two coats of aluminium paint over the APP membrane all as specified. All joints and change in direction shall be covered with cement mortar 1:3 mixed with SBR latex @ 200 ml/bag of cement and curved before laying membrane MAKE-IWL/Pidilite

Urinal, bowl type or half stall pattern, basin only including connections to flushing pipe and outgoing pipes fixed in repairs

Vitreous china wash basin white flat back size 450 x 300mm incl waste pipe chain plugs and 32mm dia bore CP coupling complete as in repairs including a pair of bracket.

S&F PVC connections 15mm size with PTMT nuts of length 450mm

M&L for Salt-glazed stoneware drain pipes laid in trenches and jointed as specified of bore 150mm

Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2

Demolition and breaking up 150mm drain pipes (Salt glazed ware, AC or reinforced concrete ) and set in cement mortar all as specified and directed by Engr in Charge.

S & F Box type Steel windows with double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.

Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed of size 105 x 60 mm

Factory made, 2nd class hard wood, plain framed, paneled shutters (with two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete, all as specified .

Factory made, 2nd class hard wood, plain framed, paneled shutters (without interlocking rail and with one panel only) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete, all as specified .

Applying two coat of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not otherwise described over 10 cm width or girth including preparation of surfaces.

Providing number plate of size 450 x 300x20mm in CM 1:4 and writing building No of height 8 to 10cms with luminous paint through grooves of size 12 x 12mm ( Base: Black, grooves : orange)

Cuttings chases for concealed water tubing of concealed conduit (cutting n.exc 10 cms girth) and making good in CM ( 1:3) in brick walls.

15mm bore fancy type bib tap brass CP (Long body) with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed.

S&F Cast copper alloy CP stop cock /angle Valve fancy type screwed both ends for iron pipe 15mm dia/ bore of pipe

Stop valves ,cast copper alloy ,screwed down high pressure , with crutch or butterfly handle , screwed both ends for iron pipe or for union 20mm dia

S&F in repairs Wash down water closet (Pedestal pattern) with ‘P” or “S” trap vitreous china coloured including all fittings i.e.,PVC low level cistern of 10 litres capacity including brackets jointing to flush pipe, PVC connection (450x15mm), flushing pipe, seat cover and pressure jet complete all as specified and directed.

S&F Vitreous China Urinal, Half stall type, white including flushing cistern, flush pipe and waste pipe

M&L for Reinforced concrete pipes, class NP2, 200 mm bore laid and jointed complete with collars

Concrete bed to drain pipes including forming cradles in cement concrete 1:4:8 type D2 for 200mm bore NP2 pipes

Undercounter type white vitreous china wash basin fitted into slab incl waste pipe chain plugs and 32mm dia bore CP coupling complete as in repairs including a pair of bracket.

S&F Aluminum frame of natural anodized aluminum min 1.5mm thick of size 101.60x44.45mm including necessary jointing cleats and fixing frame to wall/floor complete in all respect as per manufacture instructions and incluiding making good disturbed surfaces complete all as specified and directed by Engr-in-charge (Aluminum frame will be provided with/without groves & to accommodate glass, grill etc as per site requirement).

S&F aluminum doors shutter air tight with natural anodized party glazed with and including 5mm thick tinted glass and party panel with and including 12mm thick prelaminated particle board (All aluminum member Top, Bottom, Vertical & Middle of shutter made of size 82.55 x 44.45 x 1.50mm thick (Minimum) including necessary cleats glazing clips, 5mm thick tinted glass, rubber packing with anodized aluminium beading/glazing clip size 19.00 x 17.30 x 0.70mm wt 0.097 Kg/RM of both side and fixing aluuminum fitting ie SS hinges 100mm three numbers, handles 200mm long two number, tower bolts 150mm two numbers and mortize lock with 06 lever one number in each leaf. All aluminum member and fitting should be ISI marked complete in all respect as per manufacture instructions and as directed by Engr-in-Charge.

S&F aluminum window fixed type with three track (min 1.5mm thick) with three shutters made of 18x40x1.25mm section (one for wire mesh and two for tinted glass) with rubber gasket beading and locking arrangement etc complete all as specified incl 5.5mm thick tinted glass and GI wire mesh of size .56mm dia of wire and 1.40mm aperture incluiding making good disturbed surfaces complete all as specfied and directed.

Preparing new plastered surfaces of wall and applying two coats of oil bound distemper over 1 to 2 mm thick wall care putty over a coat of primer on walls etc all as specified .

Removing old brick tiles/ RCC Padding including Mud phuska and removing from site and clean the surface of roof, with cleaning with water and remove dust complete all as specified.

Material and labour Roughening surface of old concrete, roofs by picking, sweeping clean and washing down with , Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, and use to neat cement slurry complete removing debris and rubbish from site complete all as specifed and as directed by Engineer-in-Charge.

M & L for PCC 1:2:4 type B-1 as in benching coping etc and similar items including weathering slightly rounded or chamfered angles and throating on top of chajjas rails cills etc.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises as directed

M&L for 25mm thick PCC type BO 1:2:4 (12.5mm graded aggregate in flooring finishing rough to recieveing Top layer for flooring complete all as specified and directed.

S&F vitrified ceramic tiles 10mm thick,(square/rectangular ) polished ,light shade area of each tiles not exceeding 0.36sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified.

M&L for screed bed or bedding layer of cement mortar 15mm thick in CM 1:6 for laying floor finish complete all as specified.

S&F vitrified ceramic tiles 10mm thick,(square/rectangular ) polished ,light shade area of each tiles not exceeding 0.36sqm, on vertical surface such as skritting etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade complete all as specified.

M&L 10 mm thick screed bed in cement mortar (1:4) as in dado

M&L for 25cmx25cmx20 mm thick cement concrete tiles, with grey cement and no pigment, machine pressed; set jointed and pointed in neat cement slurry in floors,terece including 15mm thick screed bed or bedding layer in CM 1:4 to recieve top layer complete all as specified :and directed.

Dismantling cast-iron/PVC pipes including fittings taking out of trenches or walls as required dia of pipe upto 100mm.

S&F for in Repair rain water pipe 110mm dia with single socket joints fixed to wall with stack clamp complete all as specified and directed by Engineer-in-Charge

S&F for in Repair PVC rain water pipe bend & shoo etc for 110mm dia pipe complete all as specified and directed.

M L for preparation of old plastered surfaces of walls, & applying two coats of oil bound distemper over two coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified.

Dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings.

M & L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M & L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Dismantling timber scantlings of fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section framed Work) all as specified.

M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, gusset plates, or flat sections) including distance pieces, cleats etcFe 410 -W (GdeE- 250) qualityA complete all as specified.

M&L Mild steel screw bolt (machine made) dia 16 to 20 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but length of bolt exc 22.5cm and n exc 30cm long complete all as specified.

S&F GI snap grid (powder coated) frame work of grid size 605x605mm including hangers 6mm dia GI (upto 1200mm long) for false ceiling including notching and preparing holes, including aluminium cleat/corner pieces and GI 4mm dia suspenders with utterfly clips, wall angle of size 24 x 24mm, main runner (teee) of size 24 x 38mm, cross tee of size 24 x 28mm, (No of suspenders shall be decided by the GE as per actual size requirement) including 4mm thick non asbestos fibre cement plain builiding boards fixed to aluminum snap grid and providing two coats of white wash including preparation of surfaces including dismantling wall and ceiling board, any thickness includiing cover fillets if any all as specified and directed.

S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 125 x 60mm including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as spfd. Make:- Shivam Steel, Jammu

S&F 35mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive gauge etc without sash bar but with lock rail fitted with cut and mitered beads.

S&F mild steel wire cloth. 0.46mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples

M & L for preparation of old decorated plastered /concrete/ brick surfaces of walls (up to 3rd storey with necessary scaffolding) and applying one coat of cement based paint on old decorated surfaces including preparation.

M & L for preparation of old decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime white wash on the walls, pillars, cornices etc. complete all as specified and directed.

M & L for preparation of new old surface , Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots & rubbing with sand paper and and applying one coat of white wash on ceiling.

M&L for75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates as in plinth protection laid in alternate bays finished even and smooth without using extra cement complete all as specified.

M&L for 25mm thick PCC type BO 1:2:4 (12.5mm graded aggregate in flooring finishing rough to recieveing Top layer for flooring complete all as specified and directed.

M&L for colored non skid ceramic tiles 7to 8 mm thick, area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying as in skritting etc of tiles complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises as directed

S&F in repair Vitreous china wash down water closet white colour, Size(570x390x400) with 'S' trap, closed pattern with flat bottom, complete all as directed. .

S&F for 110mm bore Cast Iron (SWR) 'P' or 'S' trap, including fixed with solvent cement complete all as specified and directed.

Supply and fixing PVC Seat cover for EWC pan (White ) of standardd quality including hinges bolt etc all as directed by Engr-In-Carge

S&F in repair flush Cistern with Drainage L-Bend Pipe with Gasket & Installation Kit (Suitable for EWC), complete all as specified.

S&F in repair 450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers (Both Side) Without Nipple (Suitable for Geysers) complete all as specified..

Vitreous china wash hand basin white oval type (500x470mm) of size including waste pipe, all fittings and fixture all as spd and directed

Dismantling unservicable /cracked water tanks and removing from site capacity exe 250 ltr n.exe 500 ltr complete all as specified and dirceted.

S&F for 500 ltrs capcity Rotational moulded polythene water storage tanks (cylindered vertical closed top ) hoisted and fixed in position all as spd in SSR Part –I, complete all as specified and dirceted.

Surface excavation n. exc 30 cm deep and averaging 15cm deep and getting out in any type of Soil.

M&L 75mm thick hard core of gauge n.exc. 63 mm, deposited, spred and leveled in layers n.exc 15 cm thick, watered and rammed to a true surface with broken stone or boulders.

M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base concrete, etc. complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 type B-1, as in paving (20 mm graded stone aggregate) etc complete all as specified and directed.

Forming 12mm thick Expansion joints in 100mm thick PCC slab, filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and directed. Note- Expansion joint should be provided at an interval of 25m as directed by Engr-in-Charge.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed. Note-Contraction joint should be provided at an interval of 3.0m c/c on both directions as directed by Engr-in-Charge.

Excavation in trenches in any type of soil n.exc 1.5m wide and n.exc 1.5m deep and getting out complete all as specifed.

Returning filling in (soil) including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any type of soil complete all as specifed.

Removal of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specifed.

Material and labour Cement concrete 1:3:6 type C-2 (using 40mm graded aggregate) in foundation filling and mass concrete complete all as specified.

Material and labour Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:6 for manhole and external pointed flush in same mortar as the work proceeds. Complete all as specified.

Material and labour Cement concrete 1:2:4 type B-0(12.5mm graded aggregate) in benching ,bed plates,coping and the like including weathering, slightly rounded or chamfered angles as directed including form work and finishing all exposed surfaces complete all as specified.

Material and labour Rendering 15mm thick on brick surfaces in cement mortar 1:4 finished even and smooth without using extra cementcomplete all as specified.

Precast cement concrete type B-1, 1:2:4 (20mm graded) aggregate as in manhole cover all as specifed including form work complete all as specified.

Supply and fixing Deformed or TMT steel bars 8mm or 10mm dia in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia all as specified.

Mild steel angle iron/flat Iron work as in manhole cover frames and painted with two coats of bituminous paint complete all as specified.

S&F 150 mm diameter Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified.

S&F On site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc complete for 30 user conventional type all as specified.

Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2 m dia X 3.0m effective depth

Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit all as specified and as directed by Engr-in-Charge

Taking down ceiling fan any sweep, removing blades ,cleaning the fan completely for dust and dirt, oiling & greasing and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete, all as specified and directed by Engr-In-Charge.

M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2mm thick covered with 3 mm thick plastic laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly complete all as specified for the following;- (a) One light point controlled by one switch 5 Amp.

(b) One ceiling fan/exhaust fan point controlled by one switch 5Amp

(d) One socket out let 5 Amp controlled by one switch on independent board.

S&F switch piano flush type 5 Amps single pole one way complete,

S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete.

Supply in replacement, Integrel sleek extruded batten aluminium /CRCA channel fitting with LED 18 watt complete with all accessories 230V 50 Hz.. Make: Bajaj / Havells / Crompton.

S&F of ceiling rose 3 terminal complete PVC/Polycarbonate isolated boly complete all as specified and directed.

S&F sheet metal enclosure distribution board SPN 4 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs.

S&F MCB DP 40 Amps 10 KA 230 volts "C" series complete

S&F MCB single pole 6 to 30 Amps 10 KA 230 volts "C" series complete

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 sq. 2 core mm nominal cross section in service connections

M&L LED light fitting 1x9W bulk head luminaries IP 65 complete with all accessories including LED lamp 9 watt , connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V 50 Hz .

M&L white powder coated CRCA housing with LEDs 36W, 230 V, 50 Hz Recess mounting LED 2 feet x 2 feet luminaries, Swamless front frame with flat white hight transmission acrylic cover complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat part no.BZRSQL 36W GZ WH of Bajaj or equivalent in Havells / CG.

S&F for lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F for LED bulb 7 watt complete all as specified and directed. Make Bajaj /Havells

S&F baton integrated LED channel of 9W, 230V frequency 50/60 Hz integral sleek extruded polycarbonate LED channel with white acrylic cover, Power Factor not less then 0.9 complete all as specified and directed.

Supply & fixing heavey duty Exhaust fan size 225 mm sweep. sweep single phase AC 230/240V complete with louvers in metal body icluding making hole of size. Make : Havells/ Bajaj/CG

S&F sheet metal enclosure distribution board SPN 8 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs.

Supply, installation and commissioning of 50 Ltr water heater with 2 KW heating element with rust free ABS Body , single phase having capacity 5 Star rated with stand including PVC connection of any make with (ISI Mark) having10mm dia, 45 cm long with steel reinforcement suitable for hot water geyser outlet supply with 02 Nos of Unions/ cup shaped cover with washers all as directed by Engr-in-charge.Make Bajaj or equivalent

S&F building security light luminaries energy saving and environment friendly long life LED light of 25W with a minimum system lumen of 2500 Lm and system wattage not exceeding 25W with a nominal system Lumen efficiency 110 lumen/watt. The Ingress protection should be minimum IP 66 with an IK rating of 08. The Luminaries should have 4KV internal surge protection. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters, including GI bracket light grade 25 mm dia, 1.2 m long bend in shape fixed on wall having an angle 120 degree, fixed with and including two Nos 25x4 mm size flat mild steel clamp made to shape and suitable size nuts, bolts and washers etc including taking down of existing light fitting and complete, all as specified and directed. Make: BAJAJ Cat part No ENXT P 25L WH PO PC SD or equivalent in Wipro/Philips.

S&F Mounting arm for installation of LED light made from 1.5"(40mm) GI pipe Medium grade(B class) of total length 2.5 mts (to be fabricated as per approved design), to be supplied alongwith mounting clamps-02 Nos,fabricated from (65mm x 5mm)MS complete all as per directed.Note : The Contractor should fix te clamp as per site requirment.

BHARTI CONSTRUCTIONS

MAMTA ENTERPRISES

U K Engineering Works

R.K. Works

M/S CJ CONSTRUCTIONS

V K CONSTRUCTION CO

M/S Shankardass Devidass

Bidder Name

BHARTI CONSTRUCTIONS

MAMTA ENTERPRISES

M/S Shankardass Devidass

U K Engineering Works

R.K. Works

M/S CJ CONSTRUCTIONS

ASHWANI KUMAR KHAJURIA AND SONS

V K CONSTRUCTION CO