Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.4 LAccepted-AOC | ₹24.4 L | L1 | Accepted-AOC Accepted Being L1 |
| 2 | L2₹26.2 L+₹1.8 L (7.54%)Rejected-Finance ROWRIAH KB ROAD PO CHALIHA JORHAT 785004 ASSAM | JORHAT | JORHAT | ASSAM | 785004 | ₹26.2 L+₹1.8 L (7.54%) | L2 | Rejected-Finance Rejected |
| 3 | L3₹31.7 L+₹7.4 L (30.2%)Rejected-Finance | ₹31.7 L+₹7.4 L (30.2%) | L3 | Rejected-Finance Rejected |
| 4 | L4₹38.0 L+₹13.7 L (56.1%)Rejected-Finance | ₹38.0 L+₹13.7 L (56.1%) | L4 | Rejected-Finance Rejected |
| 5 | L5₹39.4 L+₹15.1 L (61.9%)Rejected-Finance | ₹39.4 L+₹15.1 L (61.9%) | L5 | Rejected-Finance Rejected |
Tender Value
Refer Docs
EMD Value
₹79,980
Closing Date
19 Jun 2023, 6:00 pmClosed
GE (AF) JORHAT
GE (AF) JORHAT PIN-785005
REPAIR OF WOODEN FURNITURE, SOFA SETS AND POLISHING / VARNISHING OF WOODEN FURNITURE UNDER GE (AF) JORHAT
2023_MES_599689_1
8546/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (AF) JORHAT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) JORHAT
₹79,980
Yes
30 Jun 2023
30 May 2023
21 Jun 2023
30 May 2023
19 Jun 2023
12 Jun 2023
Amount
Removing / Taking out carefully following old unserviceable worn out / components/ parts of TABLE WRITING (FD-275) and replacement with new materials / components, made to shape finished to receive polish complete all as specified, directed and shown on drawing.
Leg made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Stiffner made out of 1st Class hard wood made to shape complete all as specified shown on drawing.
Door made out of 18 mm thick plywood BWR grade with 1 mm thick laminated sheet fixed with adhesive and 4 mm thick 1st class hard wood edging all around complete all as specified shown on drawing.
Drawer made out of 1st class Hard wood made to shape complete all as specified shown on drawing.
Table top 1145 x 600 x 18 mm thick pre-laminated particle board with 4 mm thick 1st Class hard wood edging all around complete all as specified shown on drawing.
Side long rail made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Side short rail made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Removing / Taking out carefully following old unserviceable worn out / components/ parts of PEG TABLE (FD-277) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing.
Table Top 450 X 300 mm, 18 mm thick pre-laminated particle board with around 4 mm thick first class hard wood edging complete all as specified, directed and shown on drawing.
Leg made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Side long rail made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Side short rail made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Removing / Taking out carefully following old unserviceable worn out / components/ parts of TEA POY (FD-278) and replacement with new materials /components, made to shape finished to receive polish all as specified, directed and shown on drawing.
Table Top 600 X 450 mm, 18 mm thick pre-laminated particle board with around 4 mm thick 1st class hard wood edging complete all as specified, directed and shown on drawing.
Leg made out of 1st class Hard wood made to shape all as specified shown on drawing.
Side long rail made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Side short rail made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Removing / Taking out carefully following old unserviceable worn out / components/ parts of BOOK CASE (FD-237) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing
Top 1200 X 300 X 18 mm thick plywood BWR with 1 mm thick laminated sheet fixed with adhesive and 4 mm thick first class hard wood edging all around complete all as specified shown on drawing.
Back 6 mm thick ply wood BWR of size 1230 x 640 mm, all as specified, directed and shown on drawing
Door Leaf 18 mm thick plywood BWR with 1 mm thick laminated sheet fixed with adhesive and 4 mm thick first class hard wood edging all around complete all as specified shown on drawing.
Removing / Taking out carefully following old unserviceable worn out/components/ parts of TABLE 900 X 600 X 760 MM (HEIGHT) WITH OUT DRAWER (FD - 42M) and replacement with new materials/components, made to shape finished to receive polish all as specified, directed and shown on drawing.
Table top 900 x 600 mm of 18 mm thick pre-laminated particle board with 4mm thick 1st class hardwood edging all around complete all as specified shown on drawing.
Leg made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Side long rail made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Side short rail made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Stiffner 25 X 40 mm made out of 1st Class hard wood made to shape complete all as specified shown on drawing.
Removing / Taking out carefully following old unserviceable worn out/ components/ parts of CHAIR WOODEN BOTTOM (FD-285) and replacement with new materials / components, made to shape finished to receive polish all as specified, directed and shown on drawing
Front Leg made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Rear Leg made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Stiffner made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Front/side Rail with necessary holes for canning made out of 1st class Hard wood made to shape complete all as specified shown on drawing.
Seat 6mm thick plywood commercial BWR complete all as specified shown on drawing.
SOFA SET 4/5 SEATER (FD-281) Taking out old unserviceable foam with cover of sofa set 4/5 seater and replacement with new cushion in Sofa of size 530 x 500 x 100 mm, 40mm density and covered with new tepastry cloth superior quality approved by GE complete all as specified and shown in drawing.
Removing / Taking out carefully following old unserviceable worn out components/ parts of CHAIR DINING JCOs/ORs (FD/MAP-II/05) and replacing with new materials /components, made to shape finished to receive polish complete all as specified, directed and shown on drawing.
Removing old PVC seat and S&F new seat of chair dining MAP as per existing shape and size complete all as specified, directed and shown on drawing.
Front Leg made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Rear Leg made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Stiffner made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Front/side rails with necessary screws complete all as specified shown on drawing.
Removing / Taking out carefully following old unserviceable worn out components/ parts of CHAIR DINING Offrs (FD/MAP-II/04) and replacing with new materials /components, made to shape finished to receive polish complete all as specified, directed and shown on drawing.
Removing wornout tapestry cloth and cushion from chair dining offrs and S&F new cushion and tapestry cloth of superior quality as approved and as per existing shape, size all as specified, shown on drawing.
Front Leg made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Rear Leg made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Stiffner made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Front/side rails made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Removing/Taking out carefully following old unserviceable worn out/ components/ parts of TABLE CENTRE (FD-274) and replacement with new materials /components, made to shape finished to receive polish complete all as specified, directed and shown on drawing.
Table top 900 x 450 X 18 mm thick pre-laminated particle board with 4 mm thick 1st class hardwood edging all around complete all as specified, shown on drawing.
Leg made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Side long rail made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Side short rail made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Removing/Taking out carefully following old unserviceable worn out/ components parts/ of TABLE DINING 04 PERS (FD/E6/MAP-II/03) and replacement with new materials /components, made to shape finished to receive polish all as specified, directed and shown on drawing
Leg made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Table top 1200 X 900 X 18 mm thick pre-laminated particle board with 4 mm thick 1st class hard wood edging all around complete all as specified shown on drawing.
Side long rail made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Side short rail made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Removing / Taking out carefully following old unserviceable worn out/components/ parts of TABLE DINING 06 PERSONS (FD-273) and replacement with new materials / components, made to shape finished to receive polish complete all as specified, directed and shown on drawing.
Leg made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Table Top 1500 x 900 x 18 mm thick pre-laminated particle board with 4 mm thick 1st class hard wood edging all around complete all as specified shown on drawing.
Side long rail made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Side short rail made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Removing / Taking out carefully following old unserviceable worn out /components/ parts of SIDE BOARD (FD-26 (M) and replacement with new materials / components, made to shape finished to receive polish complete all as specified, directed and shown on drawing.
Top shall be size of 1220 X 445 X 18 mm thick plywood with 1 mm thick laminated sheet fixed with adhesive and 4 mm thick 1st class hard wood edging all around complete all as specified shown on drawing.
Door 18 mm thick plywood BWR grade with 1 mm thick laminated sheet fixed with adhesive and around 4 mm thick 1st class hard wood edging complete all as specified shown on drawing.
Side 18 mm thick plywood BWR grade with 1 mm thick laminated sheet fixed with adhesive 1st Class hard wood complete all as specified shown on drawing.
Back 6 mm thick plywood BWR of Size 1220 X 625 mm complete all as specified shown on drawing.
Drawer made out of 1st class Hard wood made to shape complete all as specified shown on drawing.
TABLE COMPUTER (TP):-
Removing the old unserviceable drawer, sliding channels and S & F new one for table computer all as per existing size, shape & model complete all as specified and directed.
All as per Item Ser No. 14.01 but top of table computer complete all as specified and directed.
All as per Item Ser No. 14.01 but key board drawer of table computer complete all as specified and directed.
CHAIR COMPUTER (TP):-
S&F PVC handle of chair computer TP of existing shape and size with all necessary connected items like mild steel bracket , cutting, making hole welding as per existing chair computer, including removing of unserviceable handle complete all as specified shown on drawing.
S&F PVC pedestal without castors (wheel) of Chair computer TP of existing shape and size with all the necessary connected items of existing chair computer, including removing of unserviceable PVC pedestal complete all as specified and shown on drawing.
S&F castor wheel of Chair computer TP of existing shape and size (Threded type or shank type) with all the necessary connected items of as per existing chair computer , including removing of unserviceable Castor (Wheel)from pedestal of chair complete all as specified and shown on drawing.
S&F Hydraulic Piston (For height adjustment) for chair computer TP of existing shape and size with all the necessary connected items as per existing chair computer TP, including removing unserviceable hydraulic piston from chair computer complete all as specified and shown on drawing.
Painting of name plate of 15" x 12" size with synthetic enamel paint, back ground in black paint and capital letter in white paint, font size 40mm height of letter as existing / suitable for name plate and as directed.
S&F Steel knobs suitable for drawers of wooden furniture complete all as specified and directed.
S&F Steel handles suitable for drawers of Table bed side(MAP) / Table dressing ladies (MAP) complete all as specified and directed.
Removing / Taking out carefully following old unserviceable worn out / components/ parts of STOOL DRESSING (FD-282) and replacement with new materials / components, made to shape finished to receive polish complete all as specified, directed and shown on drawing.
Leg made out of 1st class hard wood of size 50 x 30 mm in section throught 380 mm height complete all as specified shown on drawing.
Short Stiffeners (Two Nos) made out of 1st Class hard wood made to shape complete all as specified shown on drawing. Note : Rate for two Nos short stiffeners shall be quoted as each.
Long Stiffeners (Two Nos) made out of 1st Class hard wood made to shape complete all as specified shown on drawing. Note : Rate for two Nos long stiffeners shall be quoted as each.
Side rail long made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Side rail short made out of 1st class hard wood made to shape complete all as specified shown on drawing.
Removing / Taking out carefully following old unserviceable worn out / components/ parts of TABLE BED SIDE (FD-276) and replacement with new materials / components, made to shape finished to receive polish complete all as specified, directed and shown on drawing.
Side of the table bed side shall be of 18 mm thick Pre-laminated particle board having teak veneer face on one side and commercial on other side cut to size and shape complete all as specified shown on drawing.
Top shall be of 18 mm thick particle board having Teak veneer face on top cut to size and shape complete all as specified shown on drawing.
6 mm thick commercial plywood shall be fixed on back of table bed side cut to size and shape complete all as specified shown on drawing.
12 mm thick plywood shelf BWR shall be provided complete all as specified shown on drawing.
Removing / Taking out carefully following old unserviceable worn out / components/ parts of HAT STAND WITH MIRROR (FD-233) and replacement with new materials / components, made to shape finished to receive polish complete all as specified, directed and shown on drawing.
Mirror of size 300 mm x 440 mm x 5.5 mm complete all as specified shown on drawing.
Copper oxidized steel pegs as pre drawing for existing cap stand with mirror. Brass pegs of size 120 x 75 mm shall be fixed with brass screw complete all as specified shown on drawing.
4 mm thick Teak ply wood shall be provided to front of frame cut to size and shape complete all as specified shown on drawing.
4 mm thick commercial ply shall be provided to the back of frame cut to size and shape complete all as specified shown on drawing.
POLISHING Removing of all old faded out polish by polish remover/ scrapper or by caustic soda or by any other means without damaging the surfaces of furniture as listed below, making the surface smooth and free from dust and applying high gloss french polish till glossy/ shiny finish is obtained complete all as specified and directed.
Side Board (FD 26M)
Chair wooden bottom without arm. (Drg No FD-285)
Peg Table (FD 277)
Sofa Set of 5 Seater (FD 281)
Stool dressing (FD 282)
Teapoy (FD 278)
Table Centre (FD 274)
Table writing (FD 275)
Chair Dining JCOs/ORs (FD/MAP-II/05)
Table 900 x 600 x 760 mm (Height) without drawer (FD-42 M)
Chair Dining Offrs (FD/MAP-II/04)
Table Bed Side (FD 276)
Table Dining 06 Pers (FD-273)
Table Dining 04 Pers (FD/E6/MAP-II/03)
Book Case ( FD 237)
Sofa set of 4 Seater ( FD 281) Note:- The contract sum shall be calculated by deducting the amount shown in Schedule of Credit attached to this tender, from total amount of Schedule 'A'/BOQ.
M/S DHAR AND DHAR
PRAFUL ENTERPRISES
AJOY DUTTA CHOWDHURY AND CO
NIHAR ENTERPRISE
SANDHUSONS
M/S SANTOSHI TRADERS
A M CHOUDHURY AND CO
Bidder Name
NIHAR ENTERPRISE
SANDHUSONS
A M CHOUDHURY AND CO
AJOY DUTTA CHOWDHURY AND CO
PRAFUL ENTERPRISES
M/S GOSWAMI BROTHERS
M/S DHAR AND DHAR
M/S SANTOSHI TRADERS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .