Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.6 LAccepted-AOC | L1 | Accepted-AOC Being overall reasonable | |
| 2 | L2₹46.7 L+₹1.8 L (4.10%)Rejected-Finance | L2 | Rejected-Finance Not lowest bidder | |
| 3 | L3₹47.9 L+₹3.0 L (6.75%)Rejected-Finance AT POST SONAJ TAL MALEGAON DIST NASHIK | MALEGAON | NASHIK | MAHARASHTRA | L3 | Rejected-Finance Not lowest bidder | |
| 4 | L4₹48.2 L+₹3.4 L (7.51%)Rejected-Finance 02 PADRI SHIV NAGAR SHIV NAGAR MAHARAJGANJ UTTAR PRADESH 273303 | MAHARAJGANJ | UTTAR PRADESH | 273303 | L4 | Rejected-Finance Not lowest bidder | |
| 5 | L5₹48.7 L+₹3.8 L (8.47%)Rejected-Finance | L5 | Rejected-Finance Not lowest bidder |
| Sl No | Description | Qty | Unit | JP ENTERPRISES L4 | Shri Sant Cosntruction L7 | V.R.PRAJAPATI AND CO. L1 | S.R.M.K Enterprises L8 | MAHESH DADAJI BACHHAV L3 | S M MISHRA L6 | M/S SANDEEP CONSTRUCTION COMPANY L5 | S P DEVELOPERS L2 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00NOTE FOR ALL PAINITNG ITEMS :- The following precautionary measures shall be ensured by the contractor during execution of work :- (i) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iii) Before applying cement base paint/weather proof acrylic emulsion paint contractor shall use the wire brush for the removal of loose paint, dust, algae, moss and filling of crack using crack sealent and cleaning of surface by spray jet. (iv) Application of cement base paint strictly done by spray/mechanical spray machine only, otherwise 30% cost shall be reecovered from the respective item. (v) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery. (d) Safety head gear, gloves, apron, shoes and safety glasses should be wear while carrying out the painting works. (e) The scafolding shall be having ease of access for inspection purpose. (f) The height of the buildings may vary up to 15mtr. | |||||||||||
| 2.00 | Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:6 on wall finishing even & smooth without using extra cement at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specified and as directed. | 150 | Sqm | 300 ₹45,000 | 200 ₹30,000 | 120 ₹18,000 Lowest | 200 ₹30,000 | 220 ₹33,000 | 170 ₹25,500 | 300 ₹45,000 | 230 ₹34,500 |
| 3.00 | Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:4 on wall with water profing compound finishing even & smooth without using extra cement at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specified and as directed.
NOTE :- Water proofing compound shall be measured paid separetely | 200 | Sqm | 400 ₹80,000 | 250 ₹50,000 | 150 ₹30,000 Lowest | 230 ₹46,000 | 240 ₹48,000 | 180 ₹36,000 | 300 ₹60,000 | 240 ₹48,000 |
| 4.00 | Supply only Liquid water proofing compound complete all as specified and as directed. | 10 | Ltr | 100 ₹1,000 | 200 ₹2,000 | 100 ₹1,000 | 100 ₹1,000 | 50 ₹500 Lowest | 200 ₹2,000 | 500 ₹5,000 | 90 ₹900 |
| 5.00 | Material and labour for rendering 15mm thick on concrete surfaces in cement mortar 1:3 finishing even and smooth without using extra cement to RCC ceiling, chhajjas bottam, roof projection, facia, fins,parapet with WPT etc. and similar likes upto height 10 mtr including necessary scaffolding, ladder, formwork and including taking down cement/lime plaster of any description including raking out joints hacking for key scrubbing down with water etc and removing the debris outside the defence land complete all as specified and as directed. | 150 | Sqm | 500 ₹75,000 | 260 ₹39,000 | 200 ₹30,000 | 280 ₹42,000 | 100 ₹15,000 Lowest | 160 ₹24,000 | 1,400 ₹2,10,000 | 220 ₹33,000 |
| 6.00 | Material and labour for preparation of new plastered surfaces of ceiling, chhajjas, roof projection, facia, fins, parapet etc and applying three coats of white wash complete all as specified and as directed. | 150 | Sqm | 40 ₹6,000 | 30 ₹4,500 | 5 ₹750 Lowest | 22 ₹3,300 | 100 ₹15,000 | 30 ₹4,500 | 10 ₹1,500 | 30 ₹4,500 |
| 7.00 | Material and labour for preparation of new plastered wall surface and applying two coat of oil bond distemper emulsion white or tined over one coat of Priming plastered surfaces with alkali resistant priming paint, on plastered surfaces, preparatory on wall complete all as specified and directed. | 150 | Sqm | 80 ₹12,000 | 60 ₹9,000 | 25 ₹3,750 Lowest | 50 ₹7,500 | 40 ₹6,000 | 50 ₹7,500 | 42 ₹6,300 | 45 ₹6,750 |
| 8.00 | Material and labour for preparing new plastered surface of walls and applying two coat of cement base paint at any height including necessary scaffolding ladder etc complete all as specified and as directed. | 200 | Sqm | 200 ₹40,000 | 50 ₹10,000 | 30 ₹6,000 Lowest | 40 ₹8,000 | 50 ₹10,000 | 50 ₹10,000 | 46 ₹9,200 | 40 ₹8,000 |
| 9.00 | Material and labour for preparation of old wood or wood based surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed. | 1,500 | Sqm | 50 ₹75,000 | 30 ₹45,000 | 45 ₹67,500 | 35 ₹52,500 | 22 ₹33,000 Lowest | 50 ₹75,000 | 40 ₹60,000 | 30 ₹45,000 |
| 10.00 | Material and labour for preparation of old painted steel surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed | 10,000 | Sqm | 30 ₹3,00,000 | 25 ₹2,50,000 | 50 ₹5,00,000 | 35 ₹3,50,000 | 20 ₹2,00,000 Lowest | 50 ₹5,00,000 | 30 ₹3,00,000 | 30 ₹3,00,000 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
9 Sept 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE CENTRAL KHADKI
GE CENTRAL KHADKI RANGE HILLS ROAD KHADKI PUNE-411003
PERIODICAL SERVICES AND ALLIED B/R WORK IN A PARK, OLD PARK AND B PARK AREA UNDER AGE B/R-I UNDER GE (CENTRAL) KHADKI
2025_MES_725256_1
8250/E8 OF 2025-2026
Open Tender
Civil Works
Item Rate
270 days
KHADKI area
Class D Category a(i)
7 documents required · 7 mandatory
₹500
GE CENTRAL KHADKI
₹98,000
Yes
24 Dec 2025
8 Aug 2025
12 Sept 2025
8 Aug 2025
9 Sept 2025
26 Aug 2025
8 Aug 2025 - 19 Aug 2025
Amount
NOTE FOR ALL PAINITNG ITEMS :- The following precautionary measures shall be ensured by the contractor during execution of work :- (i) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (ii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iii) Before applying cement base paint/weather proof acrylic emulsion paint contractor shall use the wire brush for the removal of loose paint, dust, algae, moss and filling of crack using crack sealent and cleaning of surface by spray jet. (iv) Application of cement base paint strictly done by spray/mechanical spray machine only, otherwise 30% cost shall be reecovered from the respective item. (v) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery. (d) Safety head gear, gloves, apron, shoes and safety glasses should be wear while carrying out the painting works. (e) The scafolding shall be having ease of access for inspection purpose. (f) The height of the buildings may vary up to 15mtr.
Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:6 on wall finishing even & smooth without using extra cement at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specified and as directed.
Material and labour for 15mm thick Rendering on brick /concrete or dubbed surface in CM 1:4 on wall with water profing compound finishing even & smooth without using extra cement at any height including necessary scaffolding , ladder & formwork including taking down cement plaster, raking out joints, hacking for key & scrubbing down with water and removing the debris outside defence land complete all as specified and as directed. NOTE :- Water proofing compound shall be measured paid separetely
Supply only Liquid water proofing compound complete all as specified and as directed.
Material and labour for rendering 15mm thick on concrete surfaces in cement mortar 1:3 finishing even and smooth without using extra cement to RCC ceiling, chhajjas bottam, roof projection, facia, fins,parapet with WPT etc. and similar likes upto height 10 mtr including necessary scaffolding, ladder, formwork and including taking down cement/lime plaster of any description including raking out joints hacking for key scrubbing down with water etc and removing the debris outside the defence land complete all as specified and as directed.
Material and labour for preparation of new plastered surfaces of ceiling, chhajjas, roof projection, facia, fins, parapet etc and applying three coats of white wash complete all as specified and as directed.
Material and labour for preparation of new plastered wall surface and applying two coat of oil bond distemper emulsion white or tined over one coat of Priming plastered surfaces with alkali resistant priming paint, on plastered surfaces, preparatory on wall complete all as specified and directed.
Material and labour for preparing new plastered surface of walls and applying two coat of cement base paint at any height including necessary scaffolding ladder etc complete all as specified and as directed.
Material and labour for preparation of old wood or wood based surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and as directed.
Material and labour for preparation of old painted steel surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed
Material and labour for complete removal of existing treatmenst on old plastered/concrete surface of internal surface of wall by wire brushes & stopping of surfaces and applying 2 mm thick Birla/JK wall care putty to obtain smooth regular/even finish using sand paper and applying two coats of oil bound distemper emulsion complete all as specified and as directed.
Material and labour for preparation of old plastered /concrete surface of ceiling and applying two coats of acrylic oil bound distemper emulsion, white or tinted including 2mm thick birla white putty over a coat of primer (as required), necessary scaffolding etc complete all as specified and as directed.
Material and labour for preparation of old plastered or unplastered surface of wall/ceiling and applying two coat of acrylic oil bound distemper emulsion, white or tinted complete all as specified and as directed.
Material and labour for complete removal of existing treatement on wall surfaces of any description including brooming down with steel wire brushing , scrapping down smoke soot's, moulds , moss and efflorescence, salts, trading oil greasy spots etc and applying two coats of Anti fungal weather proof grade exterior Acrylic emulsion paint of approved tint over a coat of weather proof primer including filling the cracks etc with crack filling upto 5 bars of positive hydrostatic pressure on vertical walls without any dilution with forced coverage not more than 3.5 Sqm/Ltr as per manufacturer instructions and all coats including primer to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 Ltr per minute having a pressure of 3300 PSI, allow 6-8 hrs to dry the surface in subsequent coats of paint upto height 10 mtr including necessary scaffolding etc complete all as specified and as directed. MAKE :- Apex Ultima Protek Asian Paints/Nerolac excel top guard/Berger weathercoat long life 10 yrs)
Material and labour for preparation of old plastered or unplastered or concrete surface of walls, and applying one coat of cement base paint upto height 15mt including necessary scaffolding etc complete all as specified and as directed.
Material and labour for preparation of old plastered or unplastered surface of walls and applying two coats of cement base paint of approved tint upto height 15 mtr from GL including necessary scaffolding etc complete all as specified and as directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thickness (below of above ground level) and removing the debris outside the defence land complete all as specified and as directed.
Material and labour for plain cement concrete type D-2 (1:4:8) (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed.
Material and labour for plain cement concrete (1:2:4) type B-2, 100mm thick (using 40mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for plain cement concrete (1:3:6) type C-2, 75mm thick (using 40mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.
Material and labour for vitrified tiles 7-8mm thick (square/rectangular) polished 600mmx 600mm/600mm x 1200mm in floor over and including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.
Description all as per Ser item No 21 but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing.
Material and labour for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.
Material and labour for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.18 Sqm over & including 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and poited in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and as directed.
Description all as per Ser item No 24 but in skirting and dado laid over and incl 10mm thick rendering in CM 1:4 and pointing
Material and labour for glazed coloured ceramic tiles External/Internal in vertical surface 300mm x 450mm x 7mm/300mmx600mmx7mm/600mm x 7mm thick over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling and removing the debris outside the defence land complete all as specified and directed.
Material and labour for machine cut kota stone slab flooring 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish laid over and including 20mm thick Screed bed or beddidng layer in CM 1:6 for laying floor finishes including dismantling and removing the debris outside the defence land complete all as specified and as directed.
Material and labour for machine cut kota stone slab in riser of steps, skirting, dado 20-25mm thick over & including 10mm thick rendering in CM 1:4 laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to mirror finish including dismantling and removing the debris outside the defence land complete all as specified and as directed.
Material and labour for cement concrete 25mm thick type B-0, 1:2:4 (12.5mm graded stone aggregate) as in flooring complete all as specified and as directed.
Supply and fix aluminium powder coated window sliding type (3 track) with frame size 100x35x1.2mm thick and shutter frame size 39.40x17.70x1.2mm thick with and including two glass shutter and one mesh shutter including necessary jointing cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with and including 4mm thick tinted float glass and 0.36mm dia apperture 1.4mm SS wire mesh and fittings etc complete all as specified and as directed.
Supply and fix 2-3mm thick fibre glass reinforced translucent corrugated sheeting with additional reinforcement of chicken mess with two corrugation side lap fixed with 'L' or 'J' type or cranked hook bolts including dismantling of existing any type of sheeting complete all as specified and directed.
Material and labour solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame incl taking down as as per direction of Engineer-in-Charge.
Supply and fix 15mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/ ceiling concelled including taking down old steel tubing etc complete all as specified and as directed.
Supply and fix 20mm bore tubes, 'medium grade' galvanised, with all fitting and fixed complete to wall and ceiling or laid in floors including necessary cutting chasing into wall/ ceiling concelled including taking down old steel tubing etc complete all as specified and as directed.
Supply and fix in repairs 75mm bore PVC (SWR) pipe single socket in any length with rubber ring joints, laid in trenches, wall, floors or laid in sunken floor upto height 10 mtr etc complete all as specified and as directed.
Supply and fix in repair for 75mm bore PVC bends, branch piece or similar fitting are reqd to make the system functional complete all as specified and as direced.
Supply and fix in repair PVC floor trap/Nahani trap 75mm complete all as specified and as directed.
Supply and fix in repair 75mm bore PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed.
Supply and fix in repair for 110mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors or fixed on wall upto height 10 mtr etc complete all as specified and as directed.
Supply and fix in repair for 110mm bore PVC (SWR) bends, branch piece or similar fitting are required to make the system functional complete all as specified and as directed.
Supply and fix for 110mm bore PVC (SWR) junction single, (Single T), equal or unequal fitting as reqd to make the system functional complete all as specified and as directed.
Supply and fix in repair for vitreous china squatting pan, orissa pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) including 'P' or 'S' trap & PVC flushing bend fixed complete all as specified and as directed.
Supply and fix in repairs for vitreous china wash down water closet pan, pedestal pattern, white, including PVC flush pipe fixed complete including connection to existing flushing cistern including 'P' or 'S' trap complete all as specified and as directed.
Supply and fix in repairs for plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated hinging device any type (as per site requirement any type any size), ISI marked fixed complete all as specified and as directed.
Supply and fix in repairs for vitreous china Urinal, half stall type white standard size (excluding flushing cistern flush pipe and waste pipe ) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing urinal spreader of PTMT any colour, grating and union for discharge pipe fixing complete all as specified and as directed.
Supply and fix in repairs for PVC valveness, symphonic action type, flushing cistern 10 liters capacity, low level, white with inlet ball valve, float and handle including brackets complete all as specified and as directed.
Supply and fix in repair for 15mm bore stop valve, cast copper alloy, screwed down,, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.
Supply and fix in repairs for chromium plated brass angle valve/two way valve for 15mm bore pipe, fixed complete all as specified and as directed.
Supply and fix in repairs bib tap, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed 15mm bore complete all as specified and as directed.
Supply and fix in repairs for fancy pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure , with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed for 15mm bore etc complete all as specified and as directed.
Supply and fix in repairs for PVC waste pipe 32mm dia, complete with 80cm long flexible for WHB/Urinals fixed complete all as specified and as directed.
Supply and fix in repairs for PVC connection 15mm dia and 45cm long with 2 Nos PTMT nuts, fixed complete all as specified and as directed.
Supply and fix in repair health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 mtr long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and as directed.
Supply and fix in repair for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.
Supply and fix in repairs for vitreous china wash basin, white, flat back size 550x400 excluding taps, waste chain and plug and porecelain stopper but including bracket any size and waste coupling of PTMT, including cutting for and pinning in ends of bracket or erecting stand execlusive of fixing of supply and waste pipe etc fixed complete all as specified and as directed.
Supply and fix in repair rotational moulded polythylene water storage tanks 1000 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifiedin SSR Part I complete all as specified and as directed.
Supply and fix in repair rotational moulded polythylene water storage tanks 500 liters capacity (three layered), ISI marked cylindrical vertical with closed top including 3 Nos GI check nuts and tank nipple of 20mm bore for inlet and outlet, 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball hoisted and fixed in position all as specifiedin SSR Part I complete all as specified and as directed.
Supply and fix in repair toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.
Supply and fix in repair for ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 15mm bore (Minimum weight 142 gms), complete all as specified and as directed.
Supply and fix in repair for ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20mm bore (Minimum weight 210 gms), complete all as specified and as directed.
Material and labour for granite 20mm thick work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, vertical surface of wall also and like in 12mm thick screed bed or bedding layer cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling and removing the debris outside the defence land complete all as specified and as directed.
Supply and fix in repairs for vitreous china white urinal partition of size 310 x 700mm fixed to wall with brass CP screws fixed complete all as specified and as directed.
Supply and fix in repairs for tubular towel rail of brass chromium plated, 20mm dia, D type, 60cm long between flanges fixed complete all as specified and as directed.
S P DEVELOPERS (BID ID -3410395)
MAHESH DADAJI BACHHAV (BID ID -3414598)
JP ENTERPRISES (BID ID -3411275)
M/S SANDEEP CONSTRUCTION COMPANY (BID ID -3418688)
S M MISHRA (BID ID -3413889)
Shri Sant Cosntruction (BID ID -3411580)
S.R.M.K Enterprises (BID ID -3414201)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .