Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹33.0 Laccepted-aoc | accepted-aoc |
Tender Value
₹39 L
EMD Value
₹66,100
Closing Date
10 Dec 2025, 10:30 pmClosed
Directorate of Municipal Administration
KIRAN KUMAR V
Construction of Sump, Erection of Pump Motor, Pipe Line , Starter to Borewells and Installation of Light Poles in Droupadamma Temple Road in Hunasamaranahalli TMC Limit
DMA/2025-26/WS/WORK_INDENT52009
DMA/2025-26/WS/WORK_INDENT52009
Open
Water supply/sewage lines
Two Tender Document System(Two Cover)
DMA Town Municipal Council Hunasemaranahalli
6 documents required · 6 mandatory
Banker Details for reference
Executed minimum quantities of 80% of the Quantities in any One Year from the Last 5 Years ie..2020-21to 2024-25.a.PCC/RCC- 38.72Cum, b.Solid Concrete Blocks-48.64Sqm c.TMT- 3.36Tonne d.HDPE Pipe- 1,112mtr e.70W and Above Street Lights-51 Nos f.Pump Motor20HP -01 Nos
Mandating the satisfactory completion Certificate of Similar work as a prime contractor to the extent of 50percentage of the amount, i.e., Rs. 19.50 lakhs issued by an officer not below the rank of Executive Engineer. In the Last 5 Years ie..2020-21to 2024-25
Valid class-3 and Above Civil license issued from PWD department .
Valid Class-3 and Above Electrical License Issued from Electrical Inspectorate GOK.
Line of credit 30 percentage of Tender amount RS 11.70 lakh from Nationalized bank.(Un conditional)
In the last five financial years at least in two financial years of an amount of Rs,39.00 lakh (in each years 39.00 lakhs) Turn over certificate issued by Charted accountant. From last five years
None
none
none
Valid GST certificate
VALID PAN CARD
₹980
₹66,100
10 Dec 2025
24 Nov 2025
11 Dec 2025
9 Dec 2025
Construction of Sump, Erection of Pump Motor, Pipe Line , Sarter to Borewells and Installation of Lght Poles in Droupadamma Temple Road in Hunasamaranahalli TMC Limit
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cauti...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cauti...
Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all materials and labour wit...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed wit...
Add extra 4% towards Providing and removing centering, shuttering, strutting, propping etc., for bottom Slab. (I. No 5, P. No-111 of PWD & IWTD, Vol -1 SR 2023-24)
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....
Add extra 4% towards Providing and removing centering, shuttering, strutting, propping etc., for bottom Slab. (I. No 11, P. No-111 of PWD & IWTD, Vol -1 SR 2023-24)
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...
Add extra 4% towards Providing and removing centering, shuttering, strutting, propping etc., for bottom Slab. (I. No 5, P. No-111 of PWD & IWTD, Vol -1 SR 2023-24)
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing & fixing 455x610 mm cast iron cover with frame weight to be not less 38kgs (weight of cover 23 kgs and weight of frame 15 kgs)and necessary locking arrangements with M.S flats 32x6 mm etc & ...
Providing and laying water proofing treatment to the Water tanks & Liq uid Retaining structures with two component acrylic polymer modified cementitious waterproofing membrane with minimum elongation ...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (I. No 5.4 P. No-9 , Vol-2 of PWD Common SR 2023-24)
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lin ing, including cost of materials, labour, curing as per ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Providing and laying Cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal siz...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...
Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Ladder inside the container: Providing anodized aluminium ladder
using 65mm x 32mm x 3.0mm ‘C’ section for ladder side channel x
25mm dia., flutal pipe for Rungs at 250mm c/c ladder fixed at an an...
Providing and fixing RCC final and ventilators as per approved design andspecifications with form works and protected with wire mesh. The plinth to be of RCC circular pillars and canopy with an orname...
SupplyingheavygaugePVCConduitPipe....dia.......mmthickwithsuitablesizebends,metaljunctionboxesadhesivepasteetc.,bygroovecuttinginthewallandfixingbybracingUorJhooksandcementplasteringuptothewallsurface...
SupplyingandfixingsheetMetalboxmadeoutof18SWGsheetmetalwithnecessaryholesforcable/conduitentryasrequiredwithonecoat of primer of approved make etc. (I. No 1.4.7 P. No-2, Vol-6 of PWD Common SR 2023-24...
SupplyingandwiringadoptingloopsysteminexistingPVCConduit/casingcappingusing2x1.5Sqmm(Phase&Neutral)&1x1.0sqmm(Earthwire)FRLSmultistrandPVC insulatedcopperwire (confirmingtoIS-694:andlatestamendments) ...
Supplyingandfixingsuperiorqualitymodularswitchmountingpolycarbonateplatewithnecessarysupportingbackplatewithrequirednos.ofmachinescrews,boltsnutsetc.,completeontheexistingmetal/PVC box.(I. No 3.5.7 P....
Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.(I. No 3.6.4 P. No-9Vol-6 of PWD Common SR 2023-24) Stepped Fan Regulator Two Module
Supplyingandfixingofmodularswitch&connectedaccessoriesonexisting modular switch plate as per IS 3854 and IS 1293.(I. No 3.6.4 P. No-9Vol-6 of PWD Common SR 2023-24) Stepped Fan Regulator Two Module
Supplyingcapacitortypeceilingfancompletewithdownrodblades,shackle,canopiesetc,foroperationon230V,50cycles.SinglephaseACsupplyconformingtoISS-374-979 andwith doubleball bearing system.48 Sweep (1200 mm...
Fixingaceiling/wallmountingfanofallcapacitiesandalltypes,withnecessaryclampsand'S'hookmadeoutof15mmdiaMSrod,with5A.ceilingroseofapprovedqualitywithnecessarylengthof23/0.0076inchPVCinsulatedtwintwisted...
Supplying of.....feet-PVCBatten with in tegrated LEDtube....Wwithhigh quality diffuser with Life of 25000burning hours&70% lumen maintenance with CRI80. PowerInput:220-240V@50/60Hz& Powerfactor0.9alon...
Supplyofround/squarerecess/surfacemountedrollingtypeLEDDownlightwith......WGU10LEDLampRibFabricatedfromdiecastaluminiumwithwhitepowdercoatedprewiredtomainsconnector&hasswivellingunitofaluminiumdiecast...
Supplying And fixing/replacing of 6/16/32A electricalaccessories on existing switch board. COMMON SCHEDULE OF RATES FOR KPTCL, ESCOMs & PWD Electrical 2023 - 2024 Volume 6 Page no 10 item no-3.14.7
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sq...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staf LT Cable 2.5 to 25 Sqmm Common SR Volume-6 (KPTCL, ESCOMs &...
1.1 KV Class HR (Heat Resistant) PVC Insulated & UnSheathed Aluminium Wires Multistrand Single Core Lead wires as per IS-694: 2010Common SR Volume-6 (KPTCL, ESCOMs & PWD Ele) page no 22 tem No 49.02 ...
Supplying,fixingandwiringElectronicTrivectorMeter(ETV)5to32/63Athreephase4wirewholecurrentclass-1AccuracyEnergyMeter.Common SR Volume-6 (KPTCL, ESCOMs & PWD Ele) page no 19 item No 5.35
Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment g...
Supplying&fixingofPorcelainfusechannel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 100 AMPS COMMON SCHEDULE OF RATES FOR KPTCL, ESCOMs & PWD Electrical 2023 - 2024 V...
Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well cap...
Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments. 1x3x6 S...
Supply and fixing of Cast steel ASTM A 216 Gr.WCB double flanged Dual plate check valve Conforming to API 594 with latest amendments Shaft material shall be SS420/431 and spring shall be spring steel ...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Supply & Delivery at site brand new 20HP capaciti Monoblock Submerged Motor Kirloskar/Unnathi/Lubi /MBH /Aquatecs//CRI/Calama/Crompton greaves make or any other make approved by the board single stag...
Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990
with latest amendments complete with GI fittings (excluding the cost
of fittings) with cuts and threads wherever necessary, includin...
Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...
Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...
Fabricating, supplying and erection of ... ms long hot dipGalvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements,...
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete.Single Arm Bracket with 2000 mm Standa...
Supply of 90 watts LED Streetlight luminaire with pressure die castaluminium housing body for optimal thermal dissipationPWD part1 Electrical Items Page no 46 item no 11.8.4
Supply of 70 watts LED Streetlight luminaire with pressure die castaluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare
supplyingandFixing........mmdiaclampsssAGIpipebracketupto2.7meterslongterminatedwithareducingcollarof40x25mmtowhichextrapipeof175mmlengthisfixedforfixingMV/SV/MH/FTLstreetlightfittingofallcapacitieson...
Fixinghalogen/metalhalide/SVL/IL/LEDfloodlightfittingoverexistingpole/wallceilingincludingclamps,bolts,nutsandwiringusing suitable capacity wires.Common SR Volume-6 (KPTCL, ESCOMs & PWD Ele) page no 5...
Stringing of 1.1 kV grade Aerial Bunched 3 Core cable of XLPE insulation of size (3x95) (Phase Conductor) + (1x70) (Insulated COMMON SCHEDULE OF RATES FOR KPTCL, ESCOMs & PWD Electrical 2023 - 2024 V...
Accessories for ABC Cables as per NF-33, as per IS-13573 for Joints & Terminations Suspension Clamp Assembly 16 to 70 Sqmm Bare Messenger (Exclusive of Pole Clamp and Eye Hook) COMMON SCHEDULE OF RA...
Accessories for ABC Cables as per NF-33, as per IS-13573 for Joints & Terminations Eye Hook (Flat Type) for fixing Clamp COMMON SCHEDULE OF RATES FOR KPTCL, ESCOMs & PWD Electrical 2023 - 2024 Volum...
Accessories for ABC Cables as per NF-33, as per IS-13573 for Joints & Terminations Pole Clamp for HT/LT AB cable COMMON SCHEDULE OF RATES FOR KPTCL, ESCOMs & PWD Electrical 2023 - 2024 Volume 6 ITE...
Accessories for ABC Cables as per NF-33, as per IS-13573 for Joints & Terminations Pre - Insulated Lug - CPTAU for 16 Sqmm COMMON SCHEDULE OF RATES FOR KPTCL, ESCOMs & PWD Electrical 2023 - 2024 V...
Accessories for ABC Cables as per NF-33, as per IS-13573 for Joints & Terminations Dead End Clamp/Anchor Clamp Assembly 16 to 70 Sqmm Bare Messenger (Exclusive of Pole Clamp and Eye Hook) COMMON...
Accessories for ABC Cables as per NF-33, as per IS-13573 for Joints & Terminations Piercing Connector Suitable for 16 Sqmm - 95 Sqmm AB Cable - Street Light Connection COMMON SCHEDULE OF RATES FOR...
1.1 kV Class HR (Heat Resistant) PVC Insulated & Sheathed Aluminium Single Core Lead wires as per IS-694: 2010 PVC Wire - 4 Sqmm Weight per 100 Mtr Coil: 3.5 Kg COMMON SCHEDULE OF RATES FOR KPTCL, E...
Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable Up to 4C x 50 Sqmm COMMON SCHEDULE OF RATES FOR KPTCL, ESCOMs & PWD Electrical 2023 - 2024 Volume 6 ITEM NO 35.01 PAGE NO 15.
Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. FOR KPTCL, ESCOMs & PWD Ele...
Brass Cable Gland 25 mm COMMON SCHEDULE OF RATES FOR KPTCL, ESCOMs & PWD Electrical 2023 - 2024 Volume 6 ITEM NO 63.01 PAGE NO 28
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 32 amps COMMON SCHEDULE OF RATES FOR KPTCL, ESCOMs & PWD Electrical 2023 -...
Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting. COMMON SCHEDULE OF RATES FOR KPTCL, ESCOMs...
Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25 amps...
Supplying and fixing miniature circuit breakers on existingMCB distribution boards using necessary fixing materialsand 'C' Type curve, indicator ON/OFF, energy cross-3 withShort circuit breaking capac...
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 7...
Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment g...
Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
63 MM ELECTRO FUSION COUPLER
63 MM ELECTRO FUSION TEE
63 MM ELECTRO FUSION ELBOW
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW2-52009.doc
Tender Document • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .