WBPWD/EE/PMED/NIQ-01/e-Q /2024-2025

Amount

Supplying and fixing 415V,250 Amp TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. On angle iron frame.(For Auto clave and Fire fighting.)(Make- L&T/Siemens/Havells) ( Schedule No. - D-3/4a)

Supplying & Fixing Industrial Plug & Socket board with 415 V, 63A, TPN & Earth Metal Industrial Plug socket & 63A Industrial top incl. S&F 63 A FP MCB breaking capcity 10kA (C- Curve) in SS enclosure fixed on wall and cecessary conection.(Make- L&T Cat No.-DBMPS463SD)

Supplying and fixing double door 6 way Vertical TPN MCB Distribution board for MCCB incomer upto 160A with IP-42/43protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment compraising as follows:- a) Incoming:-415V, 160A Four Pole MCCB of Breaking capacity 35kA with fixed thermal and fixed magnetic / adjustable thermal and fixed magnetic setting with necessary connection ---- 1 Nos b) Outgoing:- 415 V,63 A TP MCB of Breaking capacity 10kA & C characteristics on din rail --- 6 Nos c) Cable end Box:- S & F double door sheet steel(16SWG), powder coated cable end box for TPN Vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment ---- 2 Nos [Make:-Legrand/ Schneider/ Seimens (8GB31572RC)] ( Schedule item No.-D-11/15,D-8/10,D-6/7)

Supplying and fixing 415 V, 25-32A per way, 6way TPN MCBDB with SS enclosure double-door with IP-42/43 protection with 63A Four Pole Isolators as incomer and 18 non SPMCBs ('C' Curve, 10 kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment, 1no. 63A FP Isolator, 18 no. (16-32A) SPMCB. (Make-Siemens/ Legrand/ Schneider) (schedule item no.- 6,7,14,16 PageNo.- D-5,6,10,12 respectively)

S&F 250 V,( 6-10)A per way, SPN MCBDB (2+12) way with SS enclosure double-door(Ivory White with IP-42/43 protection with DP Isolators as incomer and SPMCBs ('C' Curve, 10kA) as outgoing,on the surface of the wall with fastners & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment as per GS. INCOMING- 40A DP Isolator OUTGOING 12 Nos. 6-16A SPMCB (Make-Siemens/ Legrand/ Schneider) (Schedule item no.-6,7,13 Page No.- D-5,6,9 respectively)

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (schedule item no.-26, PageNo.- E-7)

Supply & Fixing 240 V, 2 nos. 6A, & 2 nos. 20A plug socket with separate 2 nos. 6 A & 2 nos. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (schedule item no.-28, PageNo.- E-7)

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS powder coated (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. (schedule item no.-22 PageNo.- E-6)

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make- Policab/ Havells/ Gloster/ RR kabel) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] Average run 8 mtr.

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.

Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.

Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required.

a) 2 x 22/0.3 (1.5 sqmm)+1 x 22/0.3 (1.5 sqmm) ECC

b) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [ For power board]

c) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC [ For Split A.C. machine & Medical Instrument]

d) 2x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC [From TPNDB to SPNDB]

e) 4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC. [ From VTPNDB to TPNDB]

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes:

a) 16 Sq.mm.

b) 10 sq.mm.

c) 6 sq.mm.

d) 4 sq.mm

e) 2.5 Sqmm

f) 1.5 sqmm

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works (schedule item no.-E-4)

a) 150 mm x 100 mm x 65 mm (schedule item no.-E-4/11-b)

b) 200 mm x 150 mm x 65 mm (schedule item no.-E-4/11-d)

c) 240 mm x 200 mm x 65 mm (schedule item no.-E-4/11-e)

Supply & Fixing bakelite / perspex top cover on existing Inspection board by Brass screws

a) 150 mm x 100 mm x 65 mm (schedule item no.-E-5/13-b)

b) 200 mm x 150 mm x 65 mm (schedule item no.-E-5/13-d)

c) 240 mm x 200 mm x 65 mm (schedule item no.-E-5/13-e)

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory. (schedule item no.-D-14/29)

Supplying & Fixing of Box type fan clamp of 150mm dia & 80mm depth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box. (schedule item no.-D-14/31)

Supply of 48" inch,1200 mm sweep medium speed AC Ceiling fan.( Make- Orient- summer breeze/ Crompton- High Speed / Usha) ( White Colour) incl. all accessories like sefety wire.(Without Regulator).( Nonschedule item)

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.(schedule item no.-C-3/21(a))

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc(schedule item no.-E-6/18-a)

Supply and Delivery of 230V, Single LED tube light fittings incl. all acc. Make- Wipro, Cat No.- WIO921208/ Crpmpton/ Philips.

Supply and Delivery of 230V, Double LED tube light fittings incl. all acc. Make- Wipro, Cat No.- WIO922208/ Crpmpton/ Philips.

Supply and Delivery of 230V,20 watt Polycarbonate body LED tube light (Make- Wipro, Cat No.- LL13-181-65SE/ Philips/Crompton)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length(Schedule item No:17 page No:C2)

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.(Schedule item No:16 page No:C2)

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment 4 Way with supply of 1 no 4 Pole TPN 63 A MCB Make: Legrand / Schneider/ Siemens (Schedule item No:11 page No:D9 & Schedule item No:8 page No:D7 )

Supply, installation, testing & commissioning of cubical type panel board with separate compartmentalized floor mounted, indoor type dust and vermin proof powder coated panel board, suitable for 415V 3phase, 4wire,50Hz, A.C supply of suitable size made out of 14 SWG (2mm.) thick CRCA/M.S. sheet wih angle (50X50X6 mm) , flat ( 50 X 6 mm) structure with individually hinged capsule door for all compartment with lock ,providing ventilation arrangement & free standing from floor mounting . The control panel should have suitable cable entry from bottom of back through detachable gland plate (100mm.x40mm.x4mm.) thick M.S. channel to access sufficient no of incoming & outgoing cable Incl. suitable size G.I. net guard with key & locking arrengement with interconnection with adequate size cu. wire, copper bar, cu link, cable connector etc. along with necy. nuts, bolts, clamps, grouting bolts incl. providing and fixing the following accessories etc. complete as required. (All Make: ABB/ L&T/ Siemens) Incoming:- a) S & F 415 V, 250 Amp TPN open execution type Changeover Switch-- - - 1 Nos. b) S & F 415V 250 Amp TPN SFU in open execution type incl 3 nos HRC type fuse as per rating---1no. Outgoing:- c)S & F 415V 160 Amp TPN SFU in open execution type incl 3 nos HRC type fuse as per rating---4 no. Busbar :- S & F 415 V, 400 A current carrying capacity electrolytic grade tinned copper BBC of size ( 500 x 150 mm) having bus bar dimension of (50 mm x 5mm)X 4 Nos. will be fixed on FRP Chair & the entire bars are insulated with PVC heat sinkable sleeves with suitable size & colour as per direction of E.I.C

Cable Alley :- Cable Alley in both side of outgoing connection including S & F suitable no. of brass studtype connector on insulated chair having current carrying capacity as per outgoing switch rating. Interconnection should be made with suitable size of cable as mentioned below with proper socketing,tapes in both ends.

Interconnection :- a) 25 Sqmm Stranded flexible single core copper cable for 125/100 A & 63 A main switch. ( Make : Finolex/Havells/KEI) above 125A SFU to be connected with suitable size cu busbar. b) Metering Circuit with 1.5 sqmm single core stranded FRLS PVC copper wire. only CT connection to connected 2.5 sq mm. cu wire. all the connection must be done with proper socketing & taping ( Empire & PVC Tapes ( R Y B N ). Measuring Display :- a) 0 -250Amp Digital Ammeter (96x96mm) --- 1no. (Make- L&T/ABB) b) 0-500V Digital Voltmeter (96x96mm) ---- 1no. (Make- L&T/ABB) e) 250:5A, 10VA, class-1 CT - 3no. (Make- Kappa) f) LED Type Indication Lamp - ( R Y B ) --- 3 Nos. (Make- L&T/ ABB) g) 6A, TP MCB 10ka, c- curve- 2nos. h) Metal plate Danger Board ( 8" X 6 " ) -- 2 Nos

S & D of following size 1.1Kv grade XLPE insulated Al/A cable. (Make- Polycab/ Havells/ Gloster/RR Kabel)

a) 4 core 185 sq. mm. 1.1Kv grade XLPE insulated Al/A cable. (From Ground Floor Main Panel to New Panel ( From Sub station to floor panel)

b) 4 core 95 sq. mm. 1.1Kv grade XLPE insulated Al/A cable. [ From Panel to VTPN DB]

c) 4 core 16 sq. mm. 1.1Kv grade XLPE insulated Al/A cable.

Laying of cable upto 4 core 25 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting.( Schedule item No-F-1/2-b)

Laying of cable as below, on existing Cable Tray and binding with suitable size GI wire

a) From 70sqmm to 185sqmm

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC & finishing the end of the following XLPE/PVC armoured cables by crimping method incl S & F solderless socket ( Dowels Make) with tapes, anticorrosive paste & jointing materials . ( Schedule item No-F-4/7-b+F-5/8-b)

a) 4 Core 185 sqmm XLPE/PVC armoured cable

b) 4 Core 95 sqmm XLPE/PVC armoured cable

c) 4 Core 16 sqmm XLPE/PVC armoured cable

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level By ISI-Medium GI pipe. ( Schedule item No-G-1/2-a)

S & F earth busbar galvanized ( Hot Dip ) MS flat 25 mm x 6 mm on wall as per GS . ( Schedule item No-G-2/4-a)

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. asrequired and mending good damages No. 4 SWG ( Schedule item No-G-2/5-a-1-i)

Supply of high speed 240 volt,50Hz,90 watt, 450mm wall braket fan with 3 metal blade with metal body.(Make -Orient Tornado Wall-II as per EIC).

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length ( Schedule No.- C-4/29)

Supply of heavy duty exhaust fan(Make-EPC) of following sizes incl. louver shutter after making hole in wall and mending good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection. a) 12" dia Exhaust fan.

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of diameter 30cm(12") ( Schedule No.- C-4/28b)

Supply & Fixing louver shutter on wall with necy. bolts & nuts . (6 mm dia x 62 mm long) aluminium 30cm exhaust fan (12" ) (Schedule No.-D-14/32)

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy connections.

Supply & Fixing 240 V, 25 A, Modular type North west starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

S & F timer DB concealed in wall after cutting the wall and mending good the damages to original finish incl inter connection with suitable size of copper wire and neutral link and provision for earthing attacnment & frabricated with following items as per instruction of EIC.(i) 240V,6-32 A SPMCB of breaking capacity 10kA & C charastics----1 nos (ii)240V,6-32 A DPMCB on DIN rail----1 nos (iii)240 V 2P power contractor (Rating above20A) with accessories---1 nos, (iv) Astronomical time switch----1 nos. (V)Toggle switch for manual/auto operation-1-- nos,(vi) Double door SPNDB---1 nos, (vii) LED indication for On condition of AC Machine, (viii) Necy connection by copper wire. For AC timer. (Make:- ABB/Legrand/ Simens/ L&T)

S & F timer DB (water proof) concealed in wall after cutting the wall and mending good the damages to original finish incl inter connection with suitable size of copper wire and neutral link and provision for earthing attacnment & frabricated with following items as per instruction of EIC.(i) 240V,16-32 A SPMCB of breaking capacity 10kA & C charastics----2 nos (ii)240V,40 A DPMCB on DIN rail----1 nos (iii)240 V 2P power contractor (Rating above20A) with accessories---2 nos, (iv) Astronomical time switch----1 nos. (V)Toggle switch for manual/auto operation-2-- nos,(vi) Double door SPNDB---(2+14) way - 1 nos, (vii) LED indication for On condition of both AC Machine - 2 nos. (vii) Necy connection by copper wire. For AC timer. (Make:- ABB/Legrand/ Simens/ L&T)

Supply & Delivery of Concealed split Room Air Conditioner 2.0 Ton capacity having the following specification : Compressor Type: Rotary, Rated Cooling Capacity (Watts): 6600,EER-3.14, Rated Power supply: 230V, 50Hz, Air volume for indoor unit(CFM): (618-953), Nano Platium filter, powerful cool and wide & long airflow Air Sleep Cooling Technology, LCD remote control, Electronic metal housing box, 12 hour on and off timer, auto restart, Refrigerant-R32. [Make- Mitsubshi Electric Model No.- PE/PU-M24JAK-DA/Mitsubishi Heavy Industries/General)

Supply & Delivery of Concealed split Room Air Conditioner 1.5 Ton capacity having the following specification : Compressor Type: Rotary, Rated Cooling Capacity (Watts): 5450, EER- 3.35, Rated Power supply: 230V, 50Hz, Air volume for indoor unit(CFM): (618-953), Nano Platium filter, powerful cool and wide & long airflow Air Sleep Cooling Technology, LCD remote control, Electronic metal housing box, 12 hour on and off timer, auto restart, Refrigerant-R32. [Make- Mitsubshi Electric Model No.- PE/PU-M18JAK-DA/Mitsubishi Heavy Industries/General)

Installation testing & commissioning of above AC machines at Gr floor by fixing the indoor with two number 1.2mt long MS equal angle of sizes 40mmX40mmX 6mm by one side grouted into the wall & other side welded to the existing joist. The indoor unit suspended from this angle support with 4 nos 10mm full threaded suspender bolt with double nut & spring washer. Out door unit will be fixed on wall with two number heavy type wall bracket.

Supply and laying of 3 core 2.5 sqmm 1.1kv grade xlpe insulated round flexible copper cable. (Make:- Havells/ Gloster/ KEI/ currency)

Supply and delivery of (I) Copper pipe 3/8"/1/2" for liquid as required. (III) Copper pipe 5/8" / 1/4"for suction as required (IV) Insulation Foam 3/8" / 1/2" for liquid as required. (V) 5/8" / 1/4"for suction as required.

Cost of charge –20 mm dia PVC drain pipe

Rigid 32mm PVC water pipe with 10mm nitral rubber insulation & Al strip tapping including Tee, bend,plug, socket etc. As required.

SITC of Powder Coated Al. Grill without VCD suitable size (Make:Systemair / Primier)

Supplying,fitting & fixing in position suspended false ceiling with frame work of aluminium hollow section of size 50mm X 25mm (2.0mm thickness) combined with aluminium corners of size 38mm X 25mm, suspended by aluminium hollow tube section of size 38mm X 25mm having size of 600mm X 600mm ceiling with aluminium composit panels (ACP) - Interior grade of thickness 3.0mm comprising of proctective film, polyester coating, primer, aluminium coil, adhesive film, polyethylene core again with one layer adhesive film, aluminium bottom coating and finally service coating as per manufacturer's specification finished with aluminium screw and silicon sealent complete in all respect including all incidental charges etc. as per direction of Engineer-in-charge.

ELCON ENGINEERS

MAHESWAR ELECTRICAL INDUSTRIES