Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.9 LAccepted-AOC | ₹32.9 L Quoted ₹33.3 L | L1 | Accepted-AOC Being Lowest Tenderer |
| 2 | L2₹33.9 L+₹59,760 (1.80%)Rejected-Finance | ₹33.9 L+₹59,760 (1.80%) | L2 | Rejected-Finance Being Other than lowest Tenderer |
| 3 | L3₹35.2 L+₹1.9 L (5.70%)Rejected-Finance 06 SACHIN SANTOSH DALVI G T HOSPITA CSMT MUMBAI MAHARASHTRA 400001 UDYAM MH 19 0135994 27ALQPD7257B1Z2 R M | MUMBAI | MAHARASHTRA | 400001 | ₹35.2 L+₹1.9 L (5.70%) | L3 | Rejected-Finance Being Other than lowest Tenderer |
| 4 | L4₹37.9 L+₹4.6 L (13.8%)Rejected-Finance NOT AVAILABLE | ₹37.9 L+₹4.6 L (13.8%) | L4 | Rejected-Finance Being Other than lowest Tenderer |
| Sl No | Description | Qty | Unit | Sachin santosh dalvi L3 | Prabhu associates L2 | SHREE JAGDISH FURNITURE CO. L4 | S B CONSTRUCTION CO L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing 40mm thick ready mix polymer plaster and finally finishing the surface all as specified and directed incl removal of debris outside MD land. The place of disposal shall be find out by the contractor Make :- Dr.Fixit/Sunanda/Chemestik/Fosrok as aprooved. Note :- (New reinforcement and MS Sections will be measured and paid separately). | 150 | Sqm | 400 ₹60,000 | 900 ₹1,35,000 | 55 ₹8,250 Lowest | 400 ₹60,000 |
| 2.00 | Supply and applying microconcrete of Fosroc, Dr Fixit, or equivalent aroung edges of Dock walls, jetties, corners, grooves, alters, steps, piers and other marine structure after complete cleaning of concrete surface and applying epoxy coat as bonding agent Fosroc's Nitobond or equavalent for bonding between old and new surface, including all lifts, shuttering if required and all as required including taking down old concrete as per site condition etc incl removal of debris outside MD land. The place of disposal shall be find out by the contractor complete and as directed by Engineer-in-Charge. | 8 | Cum | 26,000 ₹2,08,000 Lowest | 30,000 ₹2,40,000 | 27,000 ₹2,16,000 | 39,000 ₹3,12,000 |
| 3.00 | Demolition of plain cement concrete of any description and in any position not other wise speifically provided for and removing rubbish off the premises (outside MD land) etc complete all as specified and directed. (The place of disposal shall be find out by contractor) | 17 | Cum | 200 ₹3,400 Lowest | 750 ₹12,750 | 375 ₹6,375 | 300 ₹5,100 |
| 4.00 | Material and labour forCement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre of thickness n exc 200mm including necessary formwork complete all as specified and directed | 12 | Cum | 6,000 ₹72,000 | 7,000 ₹84,000 | 5,700 ₹68,400 | 4,300 ₹51,600 Lowest |
| 5.00 | M&L for PCC 100mm thick type D-2 (1:4:8) using 40mm graded aggregate as in sub base all as specified and as directed. | 50 | Sqm | 350 ₹17,500 | 300 ₹15,000 Lowest | 365 ₹18,250 | 350 ₹17,500 |
| 6.00 | M&L 10mm dia over mild steel TMT bars, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips etc complete all as specified and directed by Engr-in-charge. | 100 | Kg | 82 ₹8,200 | 60 ₹6,000 Lowest | 88 ₹8,800 | 85 ₹8,500 |
| 7.00 | -ditto- all as per item No 6 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders | 80 | Kg | 80 ₹6,400 | 60 ₹4,800 Lowest | 89 ₹7,120 | 85 ₹6,800 |
| 8.00 | M&L for forming joints (Expansion/ contraction/construction) in concrete slab of 150-250mm thick mechanically and joints shall be filled with Pre-formed bituminous filler and top 30mm primed and sealed with sealing compound of grade 'A' complete all as specified and as directed by Engr-in-Charge. | 2 | 10RM | 900 ₹1,800 | 2,000 ₹4,000 | 888 ₹1,776 | 500 ₹1,000 Lowest |
| 9.00 | M & L for preparation of old/new concrete surface by wire brushing, cleaning with gunney bag, brooming, watering, and filling the crack with PU filler (Putty/concrete etc) all as specified and directed. | 200 | Sqm | 35 ₹7,000 Lowest | 400 ₹80,000 | 47 ₹9,400 | 200 ₹40,000 |
| 10.00 | M & L for applying one coat of Polyurethane primer on old/new concrete floor surface all as specified and directed. | 310 | Sqm | 60 ₹18,600 Lowest | 300 ₹93,000 | 65 ₹20,150 | 250 ₹77,500 |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
18 Jul 2026, 6:55 pmClosed
LT COL ANIL KUMAR S
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8330 REPAIR AND MAINT, PAINTING WORK TO VARIOUS JETTY AND CERTAIN B/R MARINE ASSETS AND OTHER ASSOCIATED ITEMS TO SOUTH WHARF AT NAVAL DOCKYARD UNDER AGE B/R-I UNDER GE (NW) KUNJALI, MUMBAI
2026_MES_773667_1
8330/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) KUNJALI
ALL AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE (NW) KUNJALI
₹98,000
Yes
15 Sept 2026
20 Jun 2026
20 Jul 2026
30 Jun 2026
18 Jul 2026
4 Jul 2026
20 Jun 2026 - 30 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing 40mm thick ready mix polymer plaster and finally finishing the surface all as specified and directed incl removal of debris outside MD land. The place of disposal shall be find out by the contractor Make :- Dr.Fixit/Sunanda/Chemestik/Fosrok as aprooved. Note :- (New reinforcement and MS Sections will be measured and paid separately). | 150 | Sqm | - | - |
| 2 | Supply and applying microconcrete of Fosroc, Dr Fixit, or equivalent aroung edges of Dock walls, jetties, corners, grooves, alters, steps, piers and other marine structure after complete cleaning of concrete surface and applying epoxy coat as bonding agent Fosroc's Nitobond or equavalent for bonding between old and new surface, including all lifts, shuttering if required and all as required including taking down old concrete as per site condition etc incl removal of debris outside MD land. The place of disposal shall be find out by the contractor complete and as directed by Engineer-in-Charge. | 8 | Cum | - | - |
| 3 | Demolition of plain cement concrete of any description and in any position not other wise speifically provided for and removing rubbish off the premises (outside MD land) etc complete all as specified and directed. (The place of disposal shall be find out by contractor) | - | Cum | - | - |
| 4 | Material and labour forCement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre of thickness n exc 200mm including necessary formwork complete all as specified and directed | 12 | Cum | - | - |
| 5 | M&L for PCC 100mm thick type D-2 (1:4:8) using 40mm graded aggregate as in sub base all as specified and as directed. | 50 | Sqm | - | - |
| 6 | M&L 10mm dia over mild steel TMT bars, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not lessthan 0.9mm dia or securing with clips etc complete all as specified and directed by Engr-in-charge. | 100 | Kg | - | - |
| 7 | -ditto- all as per item No 6 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders | 80 | Kg | - | - |
| 8 | M&L for forming joints (Expansion/ contraction/construction) in concrete slab of 150-250mm thick mechanically and joints shall be filled with Pre-formed bituminous filler and top 30mm primed and sealed with sealing compound of grade 'A' complete all as specified and as directed by Engr-in-Charge. | 2 | 10RM | - | - |
| 9 | M & L for preparation of old/new concrete surface by wire brushing, cleaning with gunney bag, brooming, watering, and filling the crack with PU filler (Putty/concrete etc) all as specified and directed. | 200 | Sqm | - | - |
| 10 | M & L for applying one coat of Polyurethane primer on old/new concrete floor surface all as specified and directed. | 310 | Sqm | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.64 MB
8330TENDERDOCUMENTS.pdf
Tender Documents • 1.84 MB
BOQ_866285.xls
BOQ • 4.18 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .