Himachal

Active

Works

Civil Works

SRMO State Veterinary Hospital Shimla (HP). SH- Renovation of rain water pipes, fencing work and replacement of sanitary items).

HP SIDC Limited

Shimla, Himachal Pradesh

Amount: ₹7.3 LCloses: 27 Oct 2026

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published17 Oct 2026
Closes27 Oct 2026
Bid Opening28 Oct 2026

Tender Value

₹7.3 L

EMD Value

₹14,500

Closing Date

27 Oct 2026, 5:00 pm

Tender Inviting Organisation

Name

Executive Engineer

Address

HPSIDC Shimla

Work Description

SH- Renovation of rain water pipes, fencing work and replacement of sanitary items).

Tender Information

Tender ID

2026_SIDC_145877_1

Reference Number

Job No. 7

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Item Rate

Period of Work

60 days

Location

Shimla

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

8 documents required · 8 mandatory

Fee/PreQual/Technical

RequiredAppropriate Contractor registration (as per tender condition) (.pdf)

RequiredSigned copy of agreement form (.pdf)

RequiredAffidavit that the information furnished with the bid documents is true and correct. (.pdf)

RequiredAffidavit that you have not more than 2 works in hand each of Rs.100 lakh or above in any department (.pdf)

RequiredCopy of EPF registration No. and GST registration No. (.pdf)

RequiredCopy of latest ITR and pan card (.pdf)

RequiredCopy of receipt of EMD and cost of form (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹500

EMD Fee Amount

₹14,500

Important Dates

Last Activity

17 Oct 2026

Published

17 Oct 2026

Bid Opening

28 Oct 2026

Download Starts

17 Oct 2026

Download Ends

27 Oct 2026

Submission Starts

17 Oct 2026

Bill of Quantities

Item RateBoQ_Ver4.0INR

BoQ1 (22 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) including carriage of material, labour, tool & plants through all modes of transportation with in all leads and lifts and as per driection of the Engineer-in-charge.	350	Sqm.	-	-
2	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth including carriage of material, labour, tool & plants through all modes of transportation with in all leads and lifts and as per driection of the Engineer-in-charge.	425.6	Sqm.	-	-
3	Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of material, labour, tool & plants through all modes of transportation with in all leads and lifts and as per driection of the Engineer-in-charge.	502.16	Sqm.	-	-
4	Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including carriage of material, labour, tool & plants through all modes of transportation with in all leads and lifts and as per driection of the Engineer-in-charge.	34	Sqm.	-	-
5	Cement concrete flooring1:2:4 (1 cement : 2 coarse sand:4gradedstoneaggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. 40mm thick with 20mm nominal size stone aggregate including carriage of material, labour, tool & plants through all modes of transportation with in all leads and lifts and as per driection of the Engineer-in-charge.	22.5	Sqm.	-	-
6	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of material, labour, tool & plants through all modes of transportation with in all leads and lifts and as per driection of the Engineer-in-charge.	100	kg	-	-
7	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work including carriage of material, labour, tool & plants through all modes of transportation with in all leads and lifts and as per driection of the Engineer-in-charge.	130	Sqm.	-	-
8	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore including carriage of material, labour, tool & plants through all modes of transportation with in all leads and lifts and as per driection of the Engineer-in-charge.	1	Each	-	-
9	Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length including carriage of material, labour, tool & plants through all modes of transportation with in all leads and lifts and as per driection of the Engineer-in-charge.	2	Each	-	-
10	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore including carriage of material, labour, tool & plants through all modes of transportation with in all leads and lifts and as per driection of the Engineer-in-charge.	3	Each	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.08 MB

Work Item Documents

BOQ_217353.xls

BOQ • 0.33 MB

Agreement_merged.pdf

Tender Documents • 3.88 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 fine sand) including carriage of material, labour, tool & plants through all modes of transportation with in all leads and lifts and as per driection of the Engineer-in-charge.

350

Sqm.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth including carriage of material, labour, tool & plants through all modes of transportation with in all leads and lifts and as per driection of the Engineer-in-charge.

425.6

Sqm.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer including carriage of material, labour, tool & plants through all modes of transportation with in all leads and lifts and as per driection of the Engineer-in-charge.

502.16

Sqm.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including carriage of material, labour, tool & plants through all modes of transportation with in all leads and lifts and as per driection of the Engineer-in-charge.

Sqm.

Cement concrete flooring1:2:4 (1 cement : 2 coarse sand:4gradedstoneaggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. 40mm thick with 20mm nominal size stone aggregate including carriage of material, labour, tool & plants through all modes of transportation with in all leads and lifts and as per driection of the Engineer-in-charge.

22.5

Sqm.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of material, labour, tool & plants through all modes of transportation with in all leads and lifts and as per driection of the Engineer-in-charge.

100

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work including carriage of material, labour, tool & plants through all modes of transportation with in all leads and lifts and as per driection of the Engineer-in-charge.

130

Sqm.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore including carriage of material, labour, tool & plants through all modes of transportation with in all leads and lifts and as per driection of the Engineer-in-charge.

Each

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length including carriage of material, labour, tool & plants through all modes of transportation with in all leads and lifts and as per driection of the Engineer-in-charge.

Each

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15mm nominal bore including carriage of material, labour, tool & plants through all modes of transportation with in all leads and lifts and as per driection of the Engineer-in-charge.

Each