GE/CHM-101/2025-2026 ADDN / ALTN TO GENTS AND LADIES WASHROOM IN OFFICERS MESS AT CHANDIMANDIR MIL STN

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premisses, complete all as specified and directed.

Demolition of stone slabs of any description in floors/ walls laid, bedded and pointed in any mortar complete all as specified and directed

Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 1.00 sqm but not exceeding 1.50 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick bedding layer in CM 1:6, complete all as specified and directed.

Glazed ceramic coloured printed / designer tiles 7 to 8 mm thick of size exc 1.00 sqm but not exceeding 1.50 sq, first quality as in dado, set and jointed in neat cement slurry and grouted in white cement complete as on vertical surfaces over and including 10 mm thick bedding layer in CM 1:4 complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors, beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed.

Demolition of brick masonry and built in cement mortar including dismantling all quoins arches, pillars complete all as specified & directed

Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed.

Cutting holes in to brick wall built in cement mortar for inserting hold fast and making good to the disturbed portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required exc half brick but not exc one Brick complete all as specified & directed.

Taking down cement plaster on brick/ stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete.

15mm thick rendering in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement complete all as specified & directed.

5mm thick rendering in Cement and Sand mortar 1:3 on ceiling, chajja surfaces (concrete surfaces) finished even and smooth without using extra cement, complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including coat of primer on the surfaces, complete all as specified and directed.

Preparation of old decorated plastered or un-plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified.

Preparation of new plastered surfaces of ceiling and applying two coats of oil bound distemper over and including a coat of primer complete all as specified and directed.

Taking down chowkats or frame exc. 1.5 Sqm and n exc 4 Square metre with shutters, without taking off shutters from the frame, complete all as specified and directed.

Taking down chowkhats or frame n.exc 1.5 Sqm with shutter (without taking off shutters from the frame) and removal from site complete all as specified & directed.

25mm thick HPL(High pressure laminated) board for doors/ partition and gap free door treatment, SS hinges 105, SS supporting leg, SS shoe box, SS U rail, SS U code and inside lacing system with necessary full threaded star headed counter sunk, SS screws c complete all as specified and directed by Engineer-in-charge.

Stainless steel handles, fancy type(ISI Marked), 150mm long , all as specified.

150 mm size stainless steel, barrel tower bolt of extruded section and fixed complete all as specified and directed.

PVC (SWR) rain water pipe, 75mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed as in repair complete all as specified and directed.

PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc, fixed as in repair complete all as specified and directed.

75 mm bore PVC (SWR) bends of any radius, fixed as in repair complete all as specified and directed.

110mm bore PVC (SWR) bend any radius fixed as in repair complete all as specified and directed.

PVC (SWR) floor trap 75mm bore, plain with grating including jointing to waste pipe jointed and setting/fixed in cement concrete type B-1, 1:2:4 , fixed as in repair complete all as specified and directed.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, fixes as in repair complete all as specified and directed.

Wall hung WC in white with UF Soft Close Slim Seat Cover, Hinges, Accessories, Size: 375x520x4000 mm, , fixed in position, fixed as in repair complete all as specified and directed. MAKE : JAQUAR Cat part SLS-WHT-69538IUFSM or equivalent as approved by GE

Single piece slim concealed cistern with wall mouting frame, installation kit and 'S' type drain pipe connection set for wall hung WC, complete all as specified and directed MAKE : Jaquar Cat JCS-WHT-2400WS or equivalent as approved by GE

Chromium plate control plate opal flush plate complete all as specified and directed. MAKE : Jaquar JCP-CHR-152415 or equivalent as approved by GE

Vitreous China Urinal, snow white with EFS (Electronic Flushing system) with necessary clamps including complete set, fixed as in repair complete all as specified & directed Make of Urinal cat part : URS-WHT-13253N , Sensor cat part SNR-STL-51087 or equivalent as approved by GE

Wall mounted sensor faucet with control box & premixed water supply kit (battery opeated), for 15mm bore pipe, fixed in repair, complete all as specified and directed. Make : Jaquar cat part SNR-51443PK or equivalent as approved by GE

Bib taps brass, fancy type, long body, with wall flange, chromium plated, cast copper alloy, screwed down for iron pipe or for brass ferrule, suitable for 15mm bore pipe, fixed in repair complete all as specified and directed. Make : Jaquar Cat Part OPP-15037PM or equivalent as approved by GE

Stainless steel grating 127mm dia complete all as specified and directed

Towel rail 600mm long of CP fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), fixed as in repair complete all as specified and directed. Make : Jaquar cat part CPA-1111 or equivalent as approved by GE

Towel ring of CP fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 90gms), fixed as in repair complete all as specified and directed. Make : Jaquar cat part CAP-1121 RD or equivalent as approved by GE

Angular stop cock, fancy type, cast copper alloy chromium plated, screwed down, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. Make : Jaquar cat part KUP-35053PM or equivalent as approved by GE

Stop valve, cast copper alloy, chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both and for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. Make : Jaquar cat part kup35083KPM or equivalent as approved by GE

Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, fixed as in repair complete all as specified and directed. Make : Jaquar cat part ALD-573 or equivalent as approved by GE

Toilet paper holder, stainless steel, chromium plated fixed in position, fixed as in repair , complete all as specified and directed. Make : Jaquar cat part AHS-1553 or equivalent as approved by GE

20mm tubes, medium grade, galvanized, with and including all fittings and fixed complete to walls ceiling or laid in floors complete incl Taking down old one all as specified and directed.

15mm tubes, medium grade, galvanized, with and including all fittings and fixed complete to walls ceiling or laid in floors complete incl Taking down old one all as specified and directed.

1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) Triple layered, screwable lid, hoisted and fixed in position, including tank nipple, PTMT 20mm bore etc, including dismantling of existing water tank complete all as specified

PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in roof kerbs rounded or chamfered on edges complete all as specified and directed.

Supply only integral water proofing compound complete all as specified & directed.

Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed as in repair complete all as specified and directed.

10mm thick toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes with necessary screws/ beading, rubber packing, L patch bottom and top, self closing patch etc, complete all as specified and directed. NOTE : Decoratiion/Design or unit name, emblem, crest over glass shutter will be approved by Engr-in-Charge before execution and the rates are inclusive of the same

Solid 14mm thick wood polymer composite louvers wall paneling/ sheet (size 192mm x 2900mm x 14mm) fixed to walls with necessary clip, screw / adhesive complete all as specified and directed. NOTE : The wall paneling has to be in conformity with the existing wall paneling at site. Bidders ae requestd to visit the site before quoting their bid.

2mm thick PVC sheet fillet/angle/beading of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed.

Providing and fixing factory made uPVC white colour Sliding window / fixed type/ three track of any size including glazing as ordered made of extruded profileswith wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed.

Tie bars with square pipe, screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified and as directed.

Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to round and any sunk and raised moulding surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately)

Auto cut hand towel dispensor (ISI marked) including fixing accessories complete all as specificed and directed. MAKE : EURONICS (Model EP-17)/ JAQUAR (PTD-SAP-DT0106CSN) / ORCHID

Steel jet hand dryer (ISI marked) Sensor type including fixing accessories complete all as specificed and directed. MAKE : EURONICS (Model XJD3B)/ JAQUAR (HDR-SLV-AK2030)/ ORCHID

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Point wiring with approved colour code multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade, two run of single core cable for phase & neutral and one run of single core multi stranded copper conductor, PVC insulated and unsheathed FRLSH cable of size 1.5 Sqmm ,1100 volts grade for earth continuity conductor to common earth and connected to earth dolly in and including new concealed PVC conduit terminated on and including new modular sunken box and suitable size of frame, cover for mounting switch, socket and regulator fixed on surface flush with wall , comprising of One light /bell/buzzer point controlled by one switch or one fan point controlled by one switch &fan regulator, complete all as specified and directed. Note : Unit rate is inclusive of making good the disturbed surfaces by provding by wall putty/POP after mason work and finshing to match the original and nothing extra shall be paid on this account.

All as per serial item 58 herein before but for socket outlet 3 pin 6Amps on same board complete all as specified and directed

All as per serial item 58 herein before but for socket outlet 3 pin 6 Amps on independent board complete all as specified and directed

All as per serial item 58 herein before but One socket outlet three pin ,6/16 Amp, independent board, with 2.5 Sqmm (nominal area ) FRLSH cable & 2.5 Sqmm (nominal area) cable as earth continuity conductor

Switch modular type (ISI marked), single pole, one way 6 Amps, one module (ISI marked), complete all as specified & directed.

Switch modular type (ISI marked), single pole, one way 16 Amps, one module (ISI marked), complete all as specified & directed.

Socket shutters outlet 2/3 pin 6 Amp modular type multi purpose two module (ISI marked), complete all as specified & directed.

Socket shutters outlet 2 in 1 pin 6/16 Amp modular type multi purpose combined 2 module (ISI marked), complete all as specified & directed.

Modular switch type stepped fan regulator, single pole, 230 volt two module complete all as specified and directed.

Ceiling rose, PVC or polycarbonate of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.

Disconnecting the power supply and taking down carefully by unscrewing from boards fittings and fixtures such as DBs, Junction Box, Panels of any size complete with all MCCB's ,MCB's etc and removing from site, Complete all as specified and directed .

MCB DB, IP 43 protection, powder coated double door with locking arrangement suitable for surface and flush mounting, 08 way SPN with 200 Amps busbar 240V completed all as specified and directed.

MCB, SPN , 240 volt, 40 to 63Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed

MCB ,SP , 240 volt, 6Amps to 32Amps, 10 KA , 'C' series including connection with suitable size aluminium / copper lugs complete all as specified and directed

Taking down carefully old copper or aluminium sub main wiring of any Nos of wiring and size with earth wire on wooden batten/ surface conduit/ casing- capping complete with its all accessories and making good disturbed surfaces of wall , floors etc complete all as specified and directed.

Sub main wiring with two single core FRLSH PVC insulated and unsheathed cable with copper conductor of size 6 Sqmm (nominal area), 1100 Volt grade(with approved colour coding as per IS) with and including continuous earth wire of size 6 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor 1100 volts grade , and connected to main board drawing through PVC concealed conduit 25mm size(minimum size), cutting chases in walls for PVC concealed conduit and making good the disturbed surfaces by providing by wall putty/POP after mason work and finshing to match the original surfaces and nothing extra shall be paid on this account all as specified and directed. Note : (i) For the purpose of measurement, 2 single core of 6 sqmm and one single core earth cable of 6 sqmm cable shall be considered as 1 running metre. (ii) Cutting chases will be measured and paid separtely (iii) colour code shall be Red for phase, Black for neutral and green for earth

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth Complete all as specified and directed .

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mm burried directly in ground vertically to a depth not less than 2.25m below normal ground level, with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8 SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe of 20mm dia, GI light grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and presast RCC 1:2:4 type B-1 pit cover reinforced with 8mm dia MS bars both ways with lift hook made out of 8mm dia bar, watering pipe of 20mm dia GI light grade and 15mm dia light grade for earth lead protection and testing on completion all as specified and directed.

Air circulator wall mounted fan 400mm sweep, three blades, plastic body operatng, 220-240 volt uick start torque motor with copper widing with all mounting accessoreis compelte all as specified and directed.

LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size ncluding taking down any type ceiling fitting complee all as specified and directed.

Surface mounted down light 7W 360 degree rotation foldable LED ceiling spot light (Bullet) including connecting with two core flexible copper conductor cable of suitable size complete all as specified and directed.

Electric water heater(vertical type geyser), capacity 25 litre, 2 KW BEE 5 Star rated AC single phase, including MS glass lined inner tank, glass coated heating element, high density PUF insulation, Anode rod protection, heavy duty fastner not less than 100mm with suitable size of nut & washer grouted in wall with complete mason work for proper mounting of geyser fastner bolts with all accessories such as safety valve, thermostat, NRV, connection piece etc. making necessary inlet / outlet water connection, testing on load including provison of 15 Amp plug top and PVC insulated & PVC sheathed copper conductor cable 4 sqmm 3 core upto 15 Amp plug point and inlet and outlet copper connection complete all as specified and directed.

Line duct fan WADIL connected to the duct then install the fan unit on the base as per Make / Model as approved by GE, fan size 150mm rated voltage 230 V, frequency 50 HZ air flow 500m3/h including duct model PVC pipe size 6”-12 RM, diffuser 6”-3 Nos and new protection grill 6”-01 No complete all as specified and directed MAKE : WADBROS/ REXON or equivalent as approved by GE

Exhaust vent F-06 size 150mm rated voltage 240V, RPM 210, air flow 320m3/h made of ABS plastic body noise 35db compelte all as specified and directed MAKE : WADBROS/ REXON or equivalent as approved by GE

Cutting openings, through brick walls in round shape , for 150mm dia exhaust fan and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required including finishing and matching the disturbed surface and removing surplus unserviceable bricks, hard-core, etc..from site and rubbish complete all as specified & directed by Engineer-in-charge.

LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver,including lamp bracket upto 1.5metre length as per suitable for fitting including clamp with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, fixed as in repair complete all as specified and directed.

Ultron 17 watt wall light 220 volt (warm white ) size 54.5cm x 10cm x 3.5cm including connecting up with thre core flexible copper conductor cable of suitable size cmplete all as specified and directed.

Square shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light, complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, fixed as in repair complete all as specified and directed.

Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including connecting with two core flexible copper conductor cable of suitable size complete all as specified and directed.

Balaji Constructions (BID ID -3483741)

K L Kataria and Sons (BID ID -3478989)

M/s Om parkash (BID ID -3482820)

KUNDRA CONSTRUCTIONS (BID ID -3483515)