Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.3 LAccepted-AOC A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹39.2 L+₹1.1 L (2.95%)Rejected-Finance HARSH INFRASTRUCTURE NEAR DWARKADISH PETROLEUM NANDANA DEVBHOOMI DWARKA JAMNAGAR GUJARAT 361315 | DEVBHUMI DWARKA | GUJARAT | 361315 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹48.8 L+₹10.7 L (28.1%)Rejected-Finance | L3 | Rejected-Finance NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
6 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL DHANU KUMAR RAI
Garrison Engineer Daman, Tat RakshakVihar, Dalwada, Nani Daman Post, Daman (UT) PIN396210
ADDITION ALTERATION AND SPECIAL REPAIRS TO OFFICERS IN LIVING ACCOMMODATION P 160 AND CONSTRUCTION INSTALLATION WORKS FOR AUTOMATIC WEATHER STATION SITE AT TRV ICGAS DAMAN
2023_MES_600287_1
8701
Open Tender
Civil Works
Works
180 days
Garrison Engineer Daman, Tat RakshakVihar, Dalwada
Class D Category a(i)
9 documents required · 9 mandatory
₹500
Garrison Engineer Daman
₹90,000
21 Aug 2023
1 Jun 2023
8 Jul 2023
1 Jun 2023
6 Jul 2023
22 Jun 2023
Amount
Taking down shutters only of any description exc. 1.00 Sqm not exc 2.00 Sqm each etc complete all as specified and as directed .
Taking down Chowkhats or frames not exceeding. 1.5sqm each etc complete all as specified and as directed .
Taking down door/ window shutter with frame without taking off shutters from frame of any description exc. 1.50 Sqm not exc 4.00 Sqm each etc complete all as specified and as direted.
M & L for Resecuring or easing & adjusting shutters without taking down shutters of any description exceeding 1.00 sqm not exceeding 2.00 sqm each complete all as specified and directed.
M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete including demolition of old brick work or stone/boulders masonry built in cement mortar etc all as specified and as directed.
Taking down cement plaster on brick masonry walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water and removal of debries out side from MD land etc complete all as specified and directed.
M&L for 15mm thick rendering in CM 1:6 internal plaster on brick/concrete surfaces finished even and smooth without using extra cement etc complete all as specified and directed.
M&L for rendering in CM 1:4, 20 mm thick in two coats (15 mm under coat + 5mm finishing coat) on brick/concrete surfaces with 3% water proofing compound in finishing coat and finishing the surface even and fair complete all as specified and directed. (Note :- WPC will be measured and paid seperately).
Supply only integral WPC all as specified & directed.
M&L for preparation of newly plastered surfaces of wall and applying one coat of wall primer to the surfaces and finally applying two coats of oil bound distemper, complete all as specified and as directed.
M&L for preparation on new plastered surface of wall, chajja, parapet etc and applying two coats of weather proof acrylic emulsion paint over a coat of acrylic primer etc complete all as specified and as directed.
M&L for preparation of existing painted surfaces of walls, chajjas, parapets etc and applying one coat of acrylic exterior paint (Brand Apcolite Apex manufactured by Asian Paints or equivalent as approved by GE), as per the manufactures instructions and as directed, removing the loose materials and filled with crack sealing compound of approved make if necessary including scaffolding etc complete all as specified and as directed.
M&L for complete removal of existing treatment and preparation of surfaces including filling of the holes/cracks on walls with plaster putty and applying two coats of oil bound distemper paint on walls over a coat of alkali resistant primer etc complete all as specified and as directed .
M&L for preparation of old decorated surfaces and applying one coat of white wash on walls complete all as specified and as directed.
M&L for preparation of old decorated surfaces and applying one coat of white wash on ceiling complete all as specified and as directed.
S&F for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured to match coloured tiles over 20 mm screed bedding in cement mortar 1:4 complete including dismantling of old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
S&F for glazed ceramic coloured tiles 350x250x7mm/ 450x350x7mm thick on vertical surfaces such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick rendering in CM (1:4) as in backing coat complete including dismantling of old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
S&F for vitrified coloured tiles of 9-10 mm thick (square / rectangular) area of each tiles not exc 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured to match coloured tiles over 15 mm screed bedding in cement mortar 1:4 complete including dismantling of old floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
All as per item 18 above but on vertical surfaces such as skirting / dados including 15 mm thick rendering in CM (1:4) as in backing coat complete all as specified and directed.
M&L for mirror polished Kota stone 20 to 25 mm thick hand cut to size 430mm x580mm in floors, set and jointed in neat cement slurry and pointed in coloured cement with and including 20 mm thick CM (1:6) bedding concrete etc complete including dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. and removal of debris out side from MD land etc. all as specified and as directed.
M&L machine cut and mirror polished kota stone slab 20 to 25mm thick as in vertical surfaces like risers, skirtings etc, fixed and jointed in neat grey cement slurry and pointed with cement and pigments to match the shade of slab including 20 mm thick screed bed in CM (1:6) complete including dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. and removal of debris out side from MD land etc. all as specified and as directed.
M&L for grinding & mirror polishing existing kota stone flooring all as specified and directed.
Dismantling of Brick tiles or terracing tiles, single layer on roofs.
Dismantling of mud phuska or concrete bedding including Complete removal of existing water proofing treatment and cleaning of original roof by rooming, washing and roughening roof surface complete all as specified and directed
Material and labour PCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone aggregate complete all as specified and directed
Material & Labour 25cmx 25cm x 22mm thick cement concrete tiles laid over cement screed bed 15mm thick in CM 1:4 and pointed in CM 1:3 mixed with 5% of crude oil by weight of cement complete all as specified and directed. Note : Pointing shall be measured and paid seperately.
M&L for 15mm thick screed bed in CM (1:4) laid on roof surfaces mixed with itegral water proofing compound @ 3% by weight of cement, including finishing the surfaces even and smooth without using extra cement all as specified and directed. (Note: WPC shall be measured and paid separately at supply rates)
M&L for WPT to non accessible RCC roof slab/chajja/canopy/parpet etc or accesible roof to be executed surface thoroughly wire brushed, washed and dried up and cleaned of all foreign matter and dust to receive Shalitex primer @300 gms/sqm for laying 3.00 mm thick super thermolay (APP modified membrane with polyster reinforcement) 3.6 Kg/Sqm laid by torch application method and 75mm overlap in longitudinal direction and 100mm in transverse direction, a coat of silver shield (solar reflective aluminium paint) @ 0.12 Kg/Sqm all as per mfgs instructions etc complete all as specified and as directed. Make- Tikitar, STP texas, Shivam Hyperplast, Pidelite all as specified and directed.
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 with and including dismantling of old wrought iron or mild steel work of any description all as specified and as directed.
M&L for preparation of new steel surfaces exceeding 10cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide primer.
M&L for preparation of old painted steel surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L mild steel of grade Fe 410-0 as in hold fast fixed to steel/wood door/window frames including tarring and sanding etc complete all as specified and as directed.
S&F 2nd class hard wood (SAL) plain, solid, straight chowkats and frames, wrought framed, rebated on the solid,single or double rebate rounded or chamfered, put together with glue pinned at joints etc complete all as specified and as direted.
S&F 30mm thick Flush shutters,solid core construction,with block board core and plywood face panels,commercial type on both sides etc complete all as specified and as directed .
S&F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass and gauze etc but divided into squares with plain, chamfered or rounded, mitred and rebated sash bars any numbers as specified in SSR part I section 8 , clause 8.24 (a) to fitted to chowkhats.
S&F butt hinges medium weight (ISI Marked) stainless steel 100 mm size fixed in any position all as specified and directed.
S&F butt hinges medium weight (ISI Marked) stainless steel 75 mm size fixed in any position all as specified and directed.
S&F aluminium anodised barrel tower bolt of extruded section 200 mm long fixed in any position etc complete all as specified and as directed.
S&F extruded aluminium alloy handle fabricated type anodised 150 mm long fixed in any position etc complete all as specified and as directed .
Supply and fix 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding of extruded sections or cast aluminium alloy etc complete all as specified and as directed .
S&F aluminium alloy body and tongue, anodised Floor door stopper 150 mm long with hard drawn spring fixed in any position etc complete all as specified and as directed .
S&F magnetic catch of approved size and pattern fixed to shutters etc complete all as specified and directed.
S&F extruded aluminium alloy handle fabricated type anodised 100 mm long fixed in any position etc complete all as specified and as directed .
M&L for preparation of new wood surfaces of any description exc 10cm width or girth and applying two coats of synthethic enamel paint over a coat of pink primer etc complete all as specified and as directed.
M&L for standard aluminium section "heavy grade" powder coated of approved colour as in sliding windows, Ventillators, partitions and doors frames, shutters of required sizes including, rubber gasket, PVC wheel with ball bearing, concealed type lock and fixing of glass complete all as specified and directed. Make of aluminium section - ''Jindal/ Indalco/ Hindalco. (Note: (i) The measurement shall be recorded weight of aluminium section only and rate quoted shall deemed inclusive of rubber gasket, rubber beading, PVC wheel with ball bearing, concealed type locks, handle etc (ii) Glass shall be measured and paid separately as supply only.
S&F 5.00 mm thick float glass fixed in aluminium sliding window shutters etc complete all sas specified and directed.
S&F Solar controlled film 50 micron reflective type sticked to glass as per instructions of manufacturers all specified and directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed.
S&F aluminium anodised XPM grill aluminium alloy DG 202 grill 4.8 mm thick (in the shape of expanded metal of aluminium XPM jalli) opening size 59mm (length expansion) and 45 mm (width expansion) fixed in and including E/H frame all as per manufacturers instruction and as directed.
M&L for preparation of old painted wooden surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples on exisitng wooden beading etc complete all as specified and directed.
M&L 18mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work etc complete all as specified and as directed .
M&L for 6mm thick teak wood lipping fixed with nails etc complete all as specified and as directed .
M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface etc complete all as specified and as directed .
M&L for 0.9mm thk Decorative laminate type I of surface finish ,colour and pattern as approved fixed with approved adhesive all as per makers instructions and etc complete all as specified and as direted.
Supplying and laying 16mm dia of CPVC pipes SDR 13.5 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors/trenches complete including taking down old GI tubing and connections all as specified and as directed.
S&F in repairs 20mm dia bore medium grade galvanised steel tubing with all fittings fixed to walls, ceilings or laid under floors complete all as specified and directed.
Disamantling of cast iron pipes of any description with fittings fixed to walls or laid in floors/trenches.
S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.
S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls with fastners complete all as specified and directed.
S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls with fastners complete all as specified and directed.
S&F PVC (SWR) bends any radius 75mm dia
S&F PVC (SWR) bends any radius 75mm dia with access door.
S&F PVC (SWR) bends any radius 110mm dia
S&F PVC (SWR) bends any radius 110mm dia with access door
S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75mm dia with access door
S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia with access door
S&F PVC (SWR) branch piece, double (double Y), equal or unequal 75mm dia
S&F PVC (SWR) branch piece, double (double Y), equal or unequal 110mm dia
S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia
S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia with access door
S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia
S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia with access door
S&F PVC (SWR) vent cowl 75mm dia
S&F PVC (SWR) vent cowl 110mm dia
Cutting chases, pinning in, making good to facings for brick wall where require and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc, and making good, cutting not exc 10 cm girth.
M&L 100 mm thick cement concrete type C-2, 1:3:6 using 40 mm graded stone aggregate as sub base demolition of old plain cement concrete unreinforced in any position n exc 15 cm thick and removal of the same outside MD land etc complete all as specified and as directed..
M&L for PCC 1:5:10 using 40 mm graded stone aggregate mixing with WPC as in filling and mass concrete in sunken portion etc complete with and including demolition of old plain cement concrete unreinforced in any position n exc 15 cm thick and removal of the same outside MD land etc complete all as specified and as directed.
S & F in repairs PVC SWR floor trap with CP grating 75 mm dia of outlet including jointing with solvent cement etc complete all as specified and directed.
S&F in repairs waste coupling 32mm brass chromium plated ISI for WHB/sink complete all as specified and directed .
S&F in repairs standard size EWC white colour with P/S trap white coloured with and including PVC white coloured seat cover, 10 ltr capacity PVC valveless, syphonic action type, low level flushing cistern with inlet, ball valve, float valve and handle including brackets including all connecting to flushing cistern.
S&F in repair vitreous china WHB white, flat back size 550mm x 400 mm including cutting for and pinning in ends of CI brackets, pillar taps etc and making good wall or floor fitting to match existing surface complete all as specified and directed.
S&F in repairs 10 ltr capacity low/high level PVC flushing cistern (dual flush) with and including syphon assembly handle, ball valve, PVC inlet and out let pipe complete all as specified and directed.
S&F in repairs Health Faucet with 1 meter CP flexible tube & hook and all necessary fittings all as specified and directed. (Make: Prayag)
S&F in repairs 2 way bib cock double handle with flange and all necessary fittings all as specified and directed.(Make: Prayag)
S&F in repair chromium plated fancy type bib tap 15mm complete at any position etc complete all as specified and as directed.
Supply & fix in repairs Pillar tap cast copper alloy with capstan head, fancy type, chromium plated screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe & fixed, complete 15 mm dia suitable for WHB complete all as specified and directed by Engr-in-Charge.
S&F in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends etc complete all as specified and as directed .
S&F in repairs brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe or union 15mm bore complete all specified and directed.
M&L for low density polythene pipes (LDPE) of pressure rating 6 Kg/Sqm outer dia of pipe 32 mm fixed in waste pipe and water closet in repairs all as specified and directed.
M&L for low density polythene pipes (LDPE) of pressure rating 6 Kg/Sqm outer dia of pipe 40 mm fixed in waste pipe and water closet in repairs all as specified and directed .
S&F in repairs grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed.
S&F in repairs grating doom 125 mm dia of PTMT (Minimum weight 40 gms) with waste hole complete all as specified and directed.
S & F in repairs soap dish of PTMT any colour fixed with and including CP brass screws and wooden/plastic cleats complete all as specified and directed.
S&F in repair towel rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and wooden / plastic cleast.(Minimum weight 170 gms)
S&F in repair towel ring of long PTMT fixed with and including chromium plated brass screwes and wooden/plastic cleats (minimum weight 90gms) complete all as specified and directed.
Surface dressing n exc 15 cm deep and getting out in soft /loose soil.
Excavation in post holes (or similar holes) each n exc 0.5 Cum, getting out returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25cm, getting out soft/loose soil etc. complete all as specified and directed.
M&L for hardcore of gauge not exc 63mm, using broken stone or boulders, deposited, spread and levelled in layers n exc 15cm thick each layer, watered and rammed to a true surface, complete all as specified and as directed by Engr-in-Charge.
M&L for cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.
Removing excavated material exc. 250m but n exc. 500m and depositing where directed etc complete all as specified and as directed by Engr-in-Charge.
M&L Cement concrete 1:3:6 type C2, 1:3:6 (40mm graded aggregate) for embedding of fencing post all as specified and directede by Engr-in-Charge.
S&F Mild steel work as in post or flat iron coverings of posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.including all necessary drilling, bolting and embded in pillars/walls conforming to Fe -290 Gde E-165 etc complete all as specified and directed by Engr-in-Charge.
S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.
S&F round bars 10 mm dia and over in reinforcement, cut to length, bent to shape required including cranking , bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips conforming to Fe 410 W (Gde E - 250) quality A complete all as specified and as directed.
M & L RCC M30 design mix, using 20 mm graded stone aggregate as in footing all as specified and directed.
M & L RCC M30 design mix, using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts all as specified and directed.
M&L Mild steel TMT bar 10 mm dia and over cut to length, bent to shape required including cranking , bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips conforming to Fe 410 W (Gde E - 250) quality A complete all as specified and as directed.
M&L Mild steel TMT bar 5 mm dia and over upto and including 10 mm dia in stirrups, spaces and binders, cut to length, bent to shape required including cranking bending spirally hooping for column, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips quality conforming to, as in stirrups, spaces and binders complete all as specified and directed by Engr-in-Charge.
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut not exceeding 15 cm long diameter of neck 5 to 10 mm complete all as specified and as directed.
Formwork to sides of pillars, posts, struts, piers, columns and stanchions (square/rectangular on plan) for fair finished flat surface complete all as specified and directed by Engr-in-Charge.
Formwork to sides of concrete foundations ,footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinthe beams ; and similar work; vertical or to better complete all as specified and directed.
S& F PVC coated GI chain link fencing in green colour of GI wire dia 3mm to 4 mm with total dia including PVC coating 4 to 5.5mm dia complete all as specified and as directed by the Engr in charge. Note : The weight of chain link fencing should not be less than 5.60 Kg/Sqm
M&L for applying two coats of synthetic enamel paint on steel and iron surfaces on exc 10 cm in width or girth over red oxide primer surfaces complete all as specified and as directed.
S&F Straining eye bolts size M6 to M10 thread with 33mm outer dia and eye dia 0.25t load specified and directed.
S&F Straining screw size 10mm complete all as specified and as directed.
S&F 80mm dia GI pipe heavy grade complete all as specified and directed.
S&F MS Plate, plain or chequered, 5mm thick or over in thick or securing with clips confirming to Fe 290 (Gde E-165) quality a complete all as specified and directed.
Taking down carefully copper/aluminium point wiring (light, fan socket or power) point complete,including fixtures and fittings such as switches, ceiling rose, pendents, regulators, sockets, tube light fitting,main switch,MCB and DB's etc complete all as specified and directed.
Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked 1100 volts grade, single core multistranded copper conductor cable drawn through and including PVC casing and caping of size 20 mm width or above as required at site with all accessories such as Tee ,Corner, overlaping connector etc.along the suface of walls/roofs/ ceilings/floors etc including concealed PVC box for fixing of and including modular plate as per no of switch modules flush mounted suitable for fixing modular switches , sockets,fan regulators etc.including modular plate cover of required size with necessary stainless steel cadmium plated screws and including 1.5 Sqmm PVC insulated, multistranded, FRLS type,unsheathed(Green colour),single core, copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and directed for One light point / fan point controlled by one switch.
All as per item No 122 above but One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .
All as per item No.122 above, but point wiring with 2.5 sqmm and earth conductor of size 1.5 sqmm complete all as specified and directed for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board.
Supply & fixing modular type switch 6 Amps ,1way,1 module.
Supply & fixing modular type switch 16 Amps ,1way,1 module .
Supply & fixing modular type socket 6 Amps, 2/3 Pin combined 2 module .
Supply & fixing modular type socket 6 A/16 Amps, 6 Pin combined 2 module.
Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body
Supply &fix modular type fan regulator stepped type 120 W- 2 module.
Taking down existing tube light fitting, ceiling light fitting of any type/make complete and replacing of bipin holder,starter, connector etc and fixing back in existing or other place by providing PVC square box -02 Nos,tube rod and adequate length of three core flexible copper cable 0.75 sqmm from ceiling rose to fitting.
Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply & fix LED tube light fitting 1X 10 Watt white powder coated CRCA housing with highpower LEDs, aluminium front frame with flat white high transmission acrylic cover, internally prewired, 230V,complete with all accessories such as electronic driver, LED strip,connector block etc.and necessary fixing arrangement at any height and removing old unserviceable item complete all as specified and directed.
Supply and fix in repair, factory made, TPN DB 7 segment DB's, 28 way 415 volts, AC,TPN, vertical distribution board, 4 way, painted with epoxy based powder coated suitable for mounting MCCB as incomer of rating upto 160Amps, FP, 16-36 KA and MCB SP /TP as outgoings and complete with and including 200 amps rated copper busbar, neutral bar,earth bar, connecting cable links with and including top and bottom removable gland plate, complete with IP 43 protection, all as specified and as directed.
Supply & fix for MCB SP 6 to 32 Amps 10 KA,"C" series complete all as specified and directed.
Supply & fix MCCB FP 100 Amps, 415 V, 50 Hz,10 KA,'C' series complete all as specified and as directed.
Material and labour for submain wiring using proper colour code with two runs of single core, 1100 volts grade PVC insulated FRLS, ISI marked, unsheathed (flexible) multistaranded copper conductor cable of size 4 sqmm and one run of single core, 1100 volts grade, PVC insulated FRLS, ISI marked unsheathed (flexible) multistranded copper conductor of size 4Sqmm drawn through and including PVC conduit medium grade ISI marked with conduit accessories concealed in wall/ceiling/roof/column/beam etc complete all as specified and directed.
Taking down and refixing of ceiling fan 1200mm sweep to 1400mm sweep of any make from its existing position after disconnecting of electric connection for carrying out repairs including servicing, overhauling, greasing etc after cleaning the body capacitor, holder, terminal adoptor, scwrews nuts and washers etc replacement of spare parts/accessories such as ball bearings, gun metal bushes, capacitor, conopy top and bottom, shackle clip assembly, rewinding of fan motor, painting and including hanging / fixingback in existing location and making cable connections and testing for its satisfactory performance complete all as specified and directed.
Taking down and refixing of exhaust fan 250mm sweep to 300mm sweep of any make from any height after disconnecting of electric connection for carrying out repairs including servicing, overhauling, greasing etc after cleaning the body internally and externally with cleaning agent and renewal of spare parts such as split pins, capacitor holder, terminal adaptor, nuts, bolts and washers etc and replacement of components / accessories such as ball bearing, gun metal bushes, capacitor, rewinding of fan motor including fixing back in exiting location and making cable connections and testing for its satisfactory performance complete all as specified and directed.
Taking down storage type electric water heater (Geyser) 25 Ltrs capacity of any make/model/type from existing wall after disconnecting of electric connection and water pipe connections and fixing back in same location and making water pipe connections and cable connections and testing for its satisfatory functioning complete all as specified and directed.
Supply and fix down rod made of MS pipe mediun grade 15mm dia of 60cm long duly predrilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan all as specified and as directed.
Supply and fix LED wall mounted street light 35 watts New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 with suitable size of wall mounted GI bracket, clamps nuts and washer complete all as specified and directed.
Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip 25 x 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.
Supply, erect and install in true vertical position pre-stressed concrete pole 9.0 meters long size 102 x 172 mm at top and 102 x 279 mm at bottom, class 10 including painting alternate strips of each 30 cm with black and yellow synthetic enamel paint upto 1.5 mtr height from coping and the balance portion of pole shall be painted with two coat of cement based paint. The pole shell be as per approved makes of state electricity board complete all as specified and as directed. Note - Excavation/ Earth work , PCC foundation, coping shall be measured and paid separately.
Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 sqmm, 2 core laid in trenches/pipe/ducts/walls and making cable connections by providing cable lugs and glands complete all as specified and directed. Make :- Polycab/ Finolex/ Plaza/ KEI
Supply and laying reinforced precast concrete cable cover,class LV, Type 1, flt, size 250mmx150mmx40mm complete all as specified and directed
Supply and filling in and spreading unwashed river sand for cushioning and covering the under ground cables in trenches upto 23 cm and punning to 18 cm to provide required cover complete all as specified in SSR Part-I and as directed. Note: Punned thickess i.e 18 cm shall be measured for payment purpose.
Excavation in trenches not exc 1.5 m wide and not exc 1.5m in depth; for laying of cables, protection pipes and foundations etc. and getting out in any soil all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as specified and directed.
Removing excavated material not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.
Supply and fix LED street light 35/36 watt IP 65 with suitable size of GI bracket, clamps, nut and bolts complete all as specified and directed,
Supply and fix integral LED aviation light luminaire comprising of 302 Nos LED complete with all accessories, prewired,aluminium housing with polycarbonate enclosure with necessary arrangement on high mast light pole, Roof top of Aircraft Hangers and overhead reservoirs at any height by adopting saftey precautions and including removing old unserviceable item complete all as specified and directed. Make:-Bajaj cat No:BGAV302LED or equivalent of CG/Havells
Material and labour for submain wiring along with earth wire using 2 X 2.5 sq mm(colour coading) + 1X1.5 sq mm earth wire(green colour) of single core PVC insulated multistranded copper conductor 1100 Volts grade FRLS type in and including in PVC conduit complete all as specified
Supply and fix FRP looping box of size 230x170x105mm with connector and comprising of MCB SP 6 - 32 Amps, ISI marked,240V complete with and including providing GI clamps,nuts bolts etc suitable for fixing on PCC pole/ wall etc complete all as specified and directed. Make:- National/Sintex
Supply and fix in repair, factory made, sheet metal enclosure, single door, 240 volts, AC,SPN, vertical distribution board, 2 way, painted with epoxy based powder coated suitable for mounting MCB as incomer of rating upto 40Amps, FP, 16-36 KA and MCB SP /TP as outgoings and complete with and including 200 amps rated copper busbar, neutral bar,earth bar, connecting cable links with and including top and bottom removable gland plate, complete with IP 43 protection, all as specified and as directed.
Supply & fix MCB SPN 32 Amps 10 KA,"C" series complete all as specified and directed.
Supply and fix Earthing complete with copper earth plate electrode 60×60cm.× 3.15mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to copper earth strip 20 x 3 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion, all as specified and as directed.
Supply and fix Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 20 x 3 mm copper earth strip complete all se specified and directed
Supply and fix Air termination, single pointed, copper rod 12mm dia and 300mm long complete all as specified and directed.
Supply and fix Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed.
Harsh Infrastructure
M/s Qureshi Construction Co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .