Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | LI₹41.3 LAccepted-AOC | LI | Accepted-AOC Accept | |
| 2 | LII₹41.4 LRejected-AOC | LII | Rejected-AOC Accept | |
| 3 | LIII₹41.5 LRejected-AOC LOCATION ASSAM AS | LIII | Rejected-AOC Accept |
Tender Value
₹39.5 L
EMD Value
₹78,997
Closing Date
10 May 2023, 3:00 pmClosed
Executive Engineer, PWD, Dibrugarh, Moran, Lahowal
Executive Engineer, PWD, Dibrugarh, Moran, Lahowal Tingkhong Territorial Building Division, Dibrugarh
Repair and Renovation of 2(two) storied Building of Blood Bank floor of Cancer registry and Population base cancer registry Department at AMCH Dibrugarh
2023_PWBNH_30678_1
DIB/BLD/CS-01/23-24/968-A
Open Tender
Civil Works - Building
Item Rate
300 days
AMCH Dibrugarh
Please refer Tender documents.
6 documents required · 6 mandatory
₹790
₹78,997
Yes
Executive Engineer, PWD, Dibrugarh, Moran, Lahowal
28 Jul 2023
3 May 2023
10 May 2023
3 May 2023
10 May 2023
3 May 2023
3 May 2023
Amount
15.12 :-Dismantling doors, windows and clerestory windows (steel or wood) shutters including chowkaths etc. complete. 15.12.1 :-Of area 3 sq. metres and below.
15.23 :-Dismantling tiles work in floors and roofs laid in cement mortar including stacking materials within 50 metres lead etc. complete. 15.23.1 :-For thickness of tiles 10mm to 25mm
2.6 :-Earth work in excavation by mechanical means Hydraulic excavators/ manual means over area etc. complete 2.6.1 :-All kind of soil
11.2 :-Dry brick on edge flooring in required pattern with brick of class designation 7.5 on a bed of 12mm mud mortar including filling joints etc. complete.
4.20 :-Providing and laying in position ready mixed or site batched design mix c.c. for P.C.C. work etc. complete 4.20.1 :-All works upto P.L. 4.20.1.1. :-Concrete of M-10 grade
6.1 :-Brick work with common clay F.P.S. designation 7.5 in foundation and plinth in. 6.1.1. :-Cement mortar 1:4
2.27 :-Supplying and filling in plinth with sand under floor including watering ramming etc. as directed .
4.1 :-Providing and laying in position c.c. of specified grade excluding coat of centering shuttering etc.
11.6 :-Cement plaster skirting upto 30cm high without mortar 1:3 finish with a floating coat of neat cement etc. complete as directed. 11.6.1 :- 18mm thick
11.41 :-Providing and laying vitrified floor tiles in different size with water absorption etc. as directed. 11.41.2 :-Size of Tiles 600x600mm
11.41.A :-Providing and laying vitrified tiles in floor in different etc. as directed 11.41.A.3 :-Glazed vitrified tiles att/Antiskid finish of size 11.41.A.3.1 :-Size of tiles 600x600mm
11.46 :-Providing and laying Vitrified tiles in different size with water absorption etc. complete. 11.46.1 :-Size of tiles 500x500mmm
9.1 :-Providing wood work in frame of doors, windows, clerestory windows etc. complete as directed. 9.1.2. :-Sal wood .
21.10 :-Providing and fixing double glazed hermitically sealed adjusting in alluminium window, ventilators and partition wall etc. complete.
13.5 :-15mm thick cement plaster on rough side of single or half brick wall etc. complete as directed. 13.5.1 :-Propn. 1:4
13.91 :-Removing dry or oil bound distemper, water proofing cement paint etc. complete.
13.41 :-Distempering with oil bound distemper etc. complete as directed. 13.41.1 :-New work (two or more coat)
13.45 :-Finishing wall with textured exterior paint etc. 13.45.1 :-New work ( two or more coat)
13.26 :-Providing and applying plaster of paris putty etc. complete.
9.48 :-Providing and fixing M.S. grill of required pattern in frame of window etc. complete 9.48.1 :-Fixed to steel window by welding.
13.48.2 :-Painting wood work with Delux Multisurface paint of required shade. Etc.
13.48.3 :-Painting steel work with Delux Multi surface paint to required shade.
Sanitary and water supply works 17.2 :-Providing and fixing white vitreous china pedestal type W.C. (European type W.C. pan) 17.2.1 :-W.C. Pan ISI marked
17.7 :-Providing and fixing wash basin with CI bracket etc. complete. 17.7.1 :-White vitreous china wash basin 630x450mm
17.11 :-Providing and fixing white vitreous china laboratory sink etc. complete. 7.11.2 :-600x450x200mm
17.31 :-Providing and fixing 600x450mm beveled edge Mirror etc. Complete
17.71 :-Providing and fixing PTMP liquid soap container etc.
17.73 :-Providing and fixing PTMT Towel rail etc. complete. 17.73.2 :-600mm long towel rail
18.9 :-Providing and fixing CPVC pipe etc. Complete B48 External works. 18.9.9 :- 100mm dia.
18.9.8 :- 80mm dia
18.7 :-Providing and fixing CPVC pipe internal work. External works 18.7.2 :- 20mm dia
18.7.3 :- 25mm dia
18.7.6 :- 50mm dia
18.49 :-Providing and fixing C.P. brass Bib cock etc. 18.49.1 :-15mm dia nominal bore
18.52 :-Providing and fixing C.P. brass stop cock etc. complete. 18.52.1 :- 15mm nominal bore.
Electrical work : 1.10. : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. 1.10.1. : Group A
1.10.2. : Group B
1.10.3. : Group C
1.14. : Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 1.14.2. : 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
1.14.3. : 2 X 4 sq. mm + 1 X 4 sq. mm earth wire.
1.14.4. : 2 X 6 sq. mm + 1 X 6 sq. mm earth wire
1.24. : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 1.24.1. : 5/6 amps switch
1.24.3. : 15/16 amp switch
1.24.4. : 3 pin 5/6 amp socket outlet
1.24.5. : 6 pin 15/16 amp socket outlet
1.24.7. : TV antenna socket outlet
1.24.8. : Bell push
1.25. : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
1.27. : Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1.27.1. : 1 or 2 Module (75mmX75mm)
1.27.3. : 4 Module (125mmX75mm)
1.27.4. : 6 Module (200mmX75mm)
1.27.6. : 12 Module (200mmX150mm)
1.28. : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 1.28.1. : 1 or 2 Module
1.28.3. : 4 Module
1.28.4. : 6 Module
1.28.6. : 12 Module
1.31. : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
1.45. : Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
1.12. : Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps
2.23. : Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required. 2.23.2. : For 8 way, Double door SPN MCBDB
2.10. : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2.10.1. : Single pole
2.10.3. : Double pole
1.34. : Supplying and fixing brass batten/ angle holder including connection etc. as required.
5.2. : Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
5.7. : Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.
A-1. : Supplying of 1200mm sweep ceiling fan (make - Havel's : Model Name : ES PLUS 2 Start ISI Mark (White).
A-2. : Supplying 300/305mm Exhaust Fan (Make-Usha Model - Aeroclean).
A-4. : Supplying fitting and fixing of 15 Watt LED Bulb (Make Havell's/ Equivallent).
M/S PAPORI ENTERPRISE
JAYANTA DEKA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .