Providing New Borewell and Motor at Kankandacholapuram Theru in Kanganamputhur Panchayat in Mayiladuthurai Block

Amount

Drilling of borewell anywhere in Tamilnadu including transportation from one place to another place within Tamilnadu in alluvial soil or sedimentary strata of clay and sand or sand, stone, shale, pebbles, boulders etc.,by first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia by direct or reverse rotatry mud and circulation method using Contractor’s rig, fuel, labour, drilling, betonite mud and water required for drilling at the site shown by the TWAD Officers including construction of mud pit (only Calyx drills are to be used).

Reaming from 140/150 mm dia pilot bore to 300 mm dia bore as directed by the TWAD One metre 234.06 Board Officers upto 60 m Depth ending from ground level

Labour Charges for inserting PVC casing pipes assembly (with slots or without slots) in the drilled hole including jointing the pipes with PVC couplers with cement paste etc.

Charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and One hour 1303.93 fuel charges for compressor as directed by TWAD Board Officers and conducting yield test by ‘V’ notch method.

Supply and delivery of 150mm OD PVC plain casing pipe

Supply and delivery of 150mm PVC end cap

Supply and delivery of submersible pumpset 15*100

Supply and delivery of 2.5 Sqmm submersible cable

Supply and delivery of 32 mm UPVC- Column Pipe

Supply and delivery of 32mm GI elbow

Supply and delivery of 32mm GI coupling

Supply and delivery of 50mm GI flange set

Supply and delivery of 40mm MS Clamp set

Bore CoverBore cap using M.S. Flat of size 1 cm x 3 mm and M.S. sheet on top with bolting arrangements for securing the cap in position (Bore caps with M.S. Couplings need not be made) 6" Casing Pipes

Labour charges for the erection of submersiblepumpset inborewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the requireddepth valves erection clamps, pressuregauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter,three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. up to 5.0 HP

Provision for Photographic Charges

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package}

Muthukumar J