GE (N) P/TOKEN- 30 OF 2021-2022PROVISION OF CERTAIN SPECIAL REPAIR WORKS IN THE AREA OF AGE B/R (CENTRAL) UNDER GE (NORTH) PUNE

Amount

Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 m in depth for foundation, sewage line, cable etc. or for shafts, wells, cesspits, manholes, pier holes, pole etc. n. exc 10 sq m on plan and getting out in soft/ loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick with soils complete all as specified and as directed.

Removing of excavated material (soil) to distance not exc.50metres and deposited where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed.

Material and labour for hardcore broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

Material and labour for PCC (1:4:8) type D-2 (using 40 mm graded broken stone aggregate) as in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C-1 (using 20 mm graded broken stone aggregate) as in surface channels, benching for manholes and drains complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C-1 (using 20 mm graded broken stone aggregate) as in coping, blocks etc. including use and waste of form work, surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B-1 (using 20 mm graded broken stone aggregate) as in benching of manholes and the like including weathering, slightly rounded or chamfered angles and throating including use & waste of necessary form work complete all as specified and as directed.

Material and labour for precast solid cement concrete block masonry exc.10cm width using solid blocks of PCC design mix grade C5 set in cement mortar (1:6) complete all as specified and directed.

Material and labour for precast solid cement concrete block masonry not exc. 10cm width using solid blocks of PCC design mix grade C4 set in cement mortar (1:4) complete all as specified and directed.

Material and labour for precast RCC (nominal mix ) (1:2:4) type B-1, (using 20mm graded broken stone aggregates) as in manhole covers, baffle wall including form work/ mould complete all as specified and as directed.

Material labour for RCC (1:1.5:3) type A-1(nominal mix ), (using 20mm graded broken stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M & L for epoxy grouting 75mm thick for crack filing, voids and joints in concrete structures by providng deep penetration, shrink free solid mass, strong bonding inside the cracks and excellent resistance to honey combing and chemicals including necessary formworks and securing the formwork or any scafolding etc required for the process complete all as specified and directed. Note : To be operated for ceiling / soffits/ horizontal/ vertical protion of the RCC slab all as directed by Engineer-in-Charge complete.

Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified ans as directed.

Supply only Liquid water proofing compound complete all as specified and as directed.

M&L Brick work with fly ash bricks, old size, straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6 etc complete all as specified and directed.

All as per Srl item No. 16 above but except bricks

Material and labour for cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Material and labour for 18 to 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in cement mortar (1:4) over and including 10mm thick backing coat in cement mortar (1:3), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting, edge moulding, full curving the edges complete all as specified and as directed.

Material and labour for 18 to 20mm thick granite (of any type) work ( table rubbed and polished) in steps , jambs. pillars, window cills, cooking platforms and like in and including 15mm thick cement mortar (1:4) backing, pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting, edge moulding, full curving the edges including dismantling of existing stone slab/ tile complete all as specified and as directed.

Labour only for full round moulding to 18 to 20mm thick granite/ green marble slab complete all as directed.

Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200 mm thick for fair finished flat, circular surfaces of concrete all as specified and as directed.

Material and labour for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc. 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc. 5cm but n.exc. 10cm wide for fair finished surfaces complete all as specified and as directed.

M&L for Eaves/ weather boarding with 20mm thick fibre cement board (non asbestos) and fixed with self drilling and tapping screws of CSK head and joints finished with jointing compound and fiber tape as per manufacturer's recommendation complete of approved arch pattern any size and shape including taking down existing board complete all as specified and as directed. Make: V-Board (Visaka Industries Ltd)/ Everest/ Charminar/ Ramco/ Shera wall

Material and labour for 2nd class hardwood, plain, solid straigtht chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints all as specified and as directed .

Factory made 100 % solid wood plastic composite(WPC) door frame, single rebate 90 mm x 45 mm made from wood plastic composite (Single executed process) material with density 780 Kg/ Cum and complete all as specified and directed.NOTE: During Fixing of chowkhat, surface Shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement.

S&F factory made 100% solid wood plastic composite (WPC) 28 to 30 mm thick board in door shutter complete all as specified and directed. Make: Rajshri/ Sintex/ Duraplast/ Accucell

Supply and fix for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze,etc.(without sash bars), edges of framing plain,chamfered or rounded, fitted with cut and mitred beads for securing glass,etc; the size of the rail and stile as specified in SSR Par-I, Section 8, clause 8.24 (a) complete all as specified and as directed.

Supply and fix for 35mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including 35mmx 6mm thick 2nd class hard wood plain cover fillets on all sides complete all as specified and as directed

Supply and fix for 30mm thick flush shutters solid core construction, with block board core and plywood face panels, commercial type on both sides including 30mmx 6mm thick 2nd class hard wood plain cover fillets on all sides complete all as specified and as directed

Taking down chowkats or frames with shutters (without taking off shutters from frame) area not exc.1.5 sqm each complete all as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frame) area exc.1.5 sqm and not exc.4 sqm each complete all as directed

Taking down shutters of any description, area not exc.1 sqm each complete all as directed.

Taking down shutters of any description, area exc.1 sqm and not exc. 2 sqm each complete all as directed.

Taking down shutters of any description, area exc. 2 sqm each complete all as directed.

Supply and fix for factory made solid Panel PVC door shutter, 30mm thick (style) consisiting of frame made out of MS tubes for top and bottom rails. M.S. frame shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail, bottom rail; panelling of wood grain printed PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90°) and joined together with solvent cement, suppling and fixing in the frame at site as per specification and drawing including fittings complete all as specified and as directed. Make: Rajshri/ Sintex/Duraplast/Accucell

Supply and fix for solid PVC door frame of size 50mm x 47mm, made out of 5 mm thick wood grain printed PVC sheets and edges will be painted to match with printed sheet, reinforced with mild steel square tube complete all as specified and as directed. Make: Rajshri/ Sintex/Duraplast/Accucell

Supply and fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.

S & F Factory made fully glazed/wire gauge (single piece Both side) PVC prelam door shutter 29 to 30mm thick consisting of frame made up of MS tube of size 19mm X 19mm (19 guage) for top & bottom rail and in styles. Single piece plain coloured PVC sheets of 5mm thick to be used to cover style & rails. For edges, PVC sheets strip of 10mm thick struck inside with solvent cement. Plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert with PVC solid core board 19mm to 20mm thick. Panel shall be of wire gauge stainless steel wire cloth 0.36mm nominal dia of wire and everage width of aperture 1.40mm, stainless steel wire cloth shall be covered with aluminium XPM in rhombus shape in one piece from top to bottom rail, fixed with self tapping screw not less then 50mm long complete all as specified and directed by Engineer-in-Charge. Make: Rajshri/ Sintex/Duraplast/Accucell

Supply and fix for 200 mm long aluminium anodised, barrel tower bolts of extruded section, fixed with stainless steel screws complete all as specified and as directed.

S&F Stainless steel butt hinges 100mm medium weight all as specified and directed. NOTE :- All screws shall be self tapping chrome plated and length of screw not less 38 mm complete all as directed and specified.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps 30mm (when open) complete all as specified and as directed .

Supply and fix, 150mm, mild steel, ordinary rat tail rod pattern spring (helical door spring) including roller and roller plate complete all as specified and as directed.

Supply and fix for 150mm size brass handles, extruded, fabricated type, polished complete all as specified and as directed (conforming to the sample kept in GE office).

Supply and fix for 100mm size brass handles, extruded, fabricated type, polished complete all as specified and as directed.

Supply and fix for 150mm size aluminium handles, anodised, cast type complete all as specified and as directed.

Supply and fix for brass cup board lock, size 75mm of 6 levers with duplicate key complete all as specified and as directed.

Supply and fix for magnetic catch, heavy duty and connecting plate to shutters and frame complete all as specified and as directed.

S&F in repairs stainless steel single towel rail 600mm long including built in side brackets ,Cat No. ACN-1111SM of make Jaquar ‘Continental' Series or equivalent of Make as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix for floor door stopper of stainless steel body and tongue, with hard drawn steel spring, overall length of cover plate 140mm with rubber shoe all as specified and as directed. Make: Maharaja door stopper cat No. 5121 or equivalent as per Appx 'A' as approved by GE.

Supply and fix for stainless steel wire cloth 0.36 mm nominal dia of wire, average width of aperture 1.40 mm, fixed with stainless steel wire staples complete all as specified and as directed

Supply and fix for mild steel framed work such as in grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Material and labour for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. or securing with clips complete all as specified and as directed.

Supply and fix for rolled mild steel section Fe 410-W(Gde-E-250) quality A as in main and cross beams, hip and jack rafters, purlins connected to common rafters and running rails and guides for sliding doors, column posts, wind ties, fixed with angle cleats or other connecting plates, drilled for fixing all as specified and directed.

Supply and fix for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 complete all as specified and as directed.

Supply and fix in repair for aluminium anodised powder coated louvered ventilator using Jindal or equivalent make aluminium section rectangular tube of size 63.5mm x 52mm x 1.5mm including glass 3mm thick ordinary quality frosted and stainless steel wire mesh 0.36mm dia wire and 1.40mm aperture etc. complete all as specified and directed.

Supply and fix for aluminium anodised three track sliding window with two glazed shutters, one shutter with and including 4mm thick tinted glass of modiguard and one shutter with and including stainless steel wire mesh 0.36 mm dia wire and 1.40mm aperture including good quality of bearing, handle, locks, PVC rubber lining of transparent colour etc complete all as specified and as directed. Catalouge numbers of Jindal company or equivalent make sections : Three track bottom – 20957, Three track top/vertical – 20958,Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet tile profile of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws with side lap complete all as specified and as directed.

Supply and fix for 0.50mm thick pre-painted galvalume aluminium zinc coating (AZ-150) GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall/ ridge, valley gutters fixed with self tapping screws with side lap complete all as specified and as directed.

Taking down and removing old water proofing treatment of bituminous felt of roof slab and flushing at junctions of wall etc. and cleaning the surfaces with wire brushes, removing dust, foreign materials and removing the rubbish, debris off the premises to distance exc. 500m complete all as directed.

Material and labour for water proofing treatment to RCC roof slab complete all as specified below and as directed by steps of treatment as under:- (a) 10mm thick rendering in cement mortar (1:3) mixed with integral water proofing compound as per manufacturer's instructions on roof slab finished even and fair. (b) On the dried plastered surface, one coat of approved bituminous primer @ 0.40 ltr/Sqm of density at 25 degree centigrade 0.87-0.89 kg/litre and viscosity 70-160 cps or cold sticker shall be applied. (b) Over this primered surface one coat of hot blown bitumen of 85/25 shall be applied @1.20 kg/Sqm (b) APP modified bituminous memberance 3mm thick with non woven polyster mat as reinforcement weighing not less than 3.50 Kg/Sqm with plain finish shall be laid over the hot bitumen to make it sandwitched with bitumen on roof surfaces (c) Apply two coats of bituminous aluminium paint. (e) the overlap of APP shall be done with torch application, a minimum overlap of 150mm shall be made at the end and 100mm shall be made at the longitudinal sides of the polymeric membrance respectively and sealed all ovelaps and joints as per Manufacturers instructions. (Notes: (i) The contractor/Company shall furnish 10 years performance warranty as per manufacturer of material (ii) The work should be done by a company recommended applicator and he should be able to furnish stage wise on site technical reports from the concerned company technologist).

Material and labour for 0.90mm thick decorative laminate type 1 of surface finish, colour, pattern and size as approved, fixed with approved adhesive as per manufacturer’s instructions on horizontal and vertical surfaces etc. complete all as specified and as directed.

Material and labour for 18mm thick plywood, grade BWR, type BB, number of ply 9 Nos, fixed with fevicol and nails for working table/ storage almirah, cabinets, cupboards, racks and wall panelling, to the size and pattern as directed including fixing on walls, floors etc. complete all as specified directed.

Material and labour for 12mm thick plywood, grade BWR, type BB, number of ply 7 Nos, fixed with fevicol and nails for working table/ storage almirah, cabinets, cupboards, racks and wall panelling to the size and pattern as directed including fixing on walls, floors etc. including taking down existing complete all as specified and as directed.

Supply and fix external teak wood lipping 6mm thick for 18/19 mm thick particle board , block board or veneered particle board fixed with nails.

Supply and fix 40 mm dia mild steel bright finished cup board knobs fixed with nuts,screw and washer complete all as specified and as directed.

Supply and fix 18/19mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

Material and labour for 12mm to 12.5mm thick mineral fibre board false ceiling on and including GI powder coated grid work of size 600 mm x 600 mm with using 32.5mm x 23.5mm x 1.5 mm thick main tee, 25 mm x 23.5 mm x 1.28 mm cross tee and 25mm x 23.5mm x 1.2mm angle fixed to wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling, suspended @ 120 cm C/C both ways, size of grid shall be 605 mm x 605 mm complete all as specified and as directed. Make :- Armstrong, Diaken, New Age (ACE).

Material and labour for false ceiling with Single layer of size 1800mm x 1200mm x 12.5mm thick, tapered edge gypsum board (Gypboard) Plain (conforming to IS 2095-Part 1:2011, Certified board) is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50, Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc Joint Paper tape fixed on and including metal grid of hot dipped galvanized steel sections and suspended as per manufacturer's specifications and instructions complete all as specified and as directed. Make: Gyproc-Saint Gobain or equivalent of Armstrong, Diaken, New Age (ACE) as approved by GE.

Material and labour for plaster of paris decorative cornices/ moulding to the pattern as approved, cross sectional area exceeding 13 Sq.cm and not exceeding 25 Sq.cm and fixed in decorative pattern including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer matching with the colour of ceiling including dismantling existing complete all as specified and as directed.

Material and labour 75mm thick PCC (1:2:4) type B1 (using 20mm graded broken stone aggregate) as in floor finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour 75mm thick PCC (1:2:4) type B1 (using 20mm graded broken stone aggregate) as in sub base finishing the surface even and fair complete all as specified and as directed.

Material and labour 75mm thick PCC (1:3:6) type C2 (using 40mm graded broken stone aggregate) as in plinth protection, floor, hardstanding, courtyard, path laid in alternate bays not exc. 3.0m, finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour 100mm thick PCC (1:4:8) type D2 (using 40mm graded broken stone aggregate) as in sub base complete all as specified and as directed.

Material and labour 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded broken stone aggregate) as in sub base floor finishing the surface even and fair complete all as specified and as directed.

Material and labour 50mm thick PCC (1:2:4) type B1 (using 20mm graded broken stone aggregate) as in floor topping finishing the surface even and smooth without using extra cement complete all as specified and as directed.

Material and labour for coloured glazed ceramic tiles of size 450mm x 300mm x 7mm thick as in vertical surface such as dado/ skirting and of colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles laid over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.06sq.m but not exceeding 0.11sq.m as in floor etc., colour and pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Material and labour for coloured, glazed ceramic tiles, of size 600mm x 300mm x 9 to 10mm thick as in vertical surface, shade/ pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed.

Material and labour for coloured double charged vitrified ceremic tiles 10mm thick (square/ rectangular) polished, area of each tiles exc. 0.18Sqm and not exc. 0.36Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and shade/ pattern as approved by GE over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed.

Material and labour for coloured, double charged, vitrified ceramic tiles, polished of area of each tiles exc. 0.18Sqm and not exc. 0.36Sqm, 10 mm thick as in skirting/dado, shade/ pattern as approved by GE, set and jointed in neat cement slurry using grey cement and pointed in white or coloured cement to match the colour of tiles over and including 10 mm thick rendering in cement mortar (1:3) complete all as specified and as directed.

Material and labour for machine pressed precast cement concrete coloured interlocking paver block, of triangular / Zigzag / Haxagone/any shape/ design and size as approved, 60mm thick, conforming to IS 15658-2006, M-35 grade with grey cement and pigments in floor/ pavement laid over and including 25mm thick sand cushioning laid dry to the profile complete all as specified and as directed. NOTE: (i) Manufacturers test certificate shall be submitted alongwith sample.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises complete all as directed.

Material and labour for 10mm thick rendering in cement mortar (1:3) on fair faces of brick or concrete surfaces finished even and fair complete all as specified and as directed.

Material and labour for rendering 15mm thick in CM (1:6) on fair faces of brickwork or concrete surfaces wall finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for appying 1.5mm thick wall care putty on new plastered wall surface complete all as specified and as directed.

Taking down cement plaster any description on brick/ block/ stone walls, roof etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Material and labour for complete removal of existing finish /treatment on walls using steel wire brush, sanding machine, rubbing ivory papers etc. and washing, rubbing down and stopping of distempered and painted surfaces, preparing surfaces ready to receive new finish complete all as directed.

Material and labour for applying 1 to 1.5mm thick white cementitious wall care putty on wall/ceiling, filling cracks by crack filler and smoothen surface with sand paper complete all as specified and as directed.

Material and labour for appying one coat of alkali resistant priming paint on walls complete all as specified and as directed.

Material and labour for appying two coat of acrylic distemper of approved tint on wall surfaces complete all as specified and as directed.

Material and labour for preparation of new plastered surface of any description and appying two coats of 100% acrylic exterior emulsion paint over a coat of primer complete all as specified and as directed.

Material and labour for preparation of old painted surface and appying two coat of 100% acrylic exterior emulsion paint on roof/wall/floor etc over coat of primer complete all as specified and as directed.(note height of building exceeding 5m)

Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or of equivalent make as approved by GE, removing loose paints etc , removing nails etc and making good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of acrcylic distemper complete all as specified and as directed.

Material and labour for preparation of newly plastered or unplastered surfaces of wall and applying three coats of white wash all as specified and as directed.

Material and labour for preparation of old decorated surfaces ceiling and applying one coat of dry distemper complete all as specified and as directed.

Material and labour for preparation of newly plastered or unplastered wall surfaces and applying two coats of oil bound/ acrylic distemper over a coat of priming paint over a coat of putty to obtain true line to achieve smooth surface complete all as specified and as directed.

Material and labour for two coats of acrylic distemper over a coat of alkali resistant primer on wall complete all as specified and as directed

Material and labour for two coats of acrylic distemper over a coat of alkali resistant primer on ceiling complete all as specified and as directed

Material and labour for applying two coats of luster paint over coat of cement primer to wall/ceiling surfaces complete all as specified and as directed

Material and labour for complete removal of existing treatment on walls, preparation of surfaces and make the surfaces free from loose particles, oil stains etc., preparing surfaces, applying putty where required and applying two coats of oil bound/ emulsion distemper over a coat of primer complete all as specified and as directed.

Preparation of old treated plastered surface of wall by filling cracks by crack fill paste of Berger or of equivalent make as approved by GE, removing loose paints etc , removing nails etc and making good surface by applying white birla/JK wall putty wherever required, smoothen surface by sand paper and applying one coat of acrcylic distemper complete all as specified and as directed.

Material and labour for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed

Material and labour for preparation of newly plastered or unplastered surfaces of ceiling and applying three coats of white wash all as specified and as directed.

Material and labour for preparation of new untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of old surfaces of wood and wood based material surface of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and as directed.

Material and labour for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of external surfaces of walls and appying two coats of chemical water proofing treatment on wall, chajja, terrace and parapet walls, grooves etc. complete all as per manufacturer instructions, as specified and as directed by Engineer-in-Charge. Make: Chemistik PU 50 (Heavy duty PU waterproof coating) or equivalent of Pidilite Industries Ltd DR Fixit, FOSROC as approved by GE

Supply and fix 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Fixing only for 15mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning tubing complete all as specified and as directed.

Fixing only 20mm bore steel water tubing 'medium grade' galvanised, with all fittings and fixed to walls and ceiling or laid in floors including cleaning tubing complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing with all fittings and connections complete all as specified and as directed.

Dismantling water tanks, capacity exc 500 and not exceeding 1000 litres, complete all as specified and as directed.

Supply and fix for 1000 litres capacity, rotational moulded polythelene water storage tanks (ISI marked) (three layer, cylindrical vertical with closed top), hoisted and fixed in postion including 20mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) complete all as specified and as directed.

Supply and fix bib tap for 15mm bore pipe, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs, chromium plated bib cock with wall flange quarter turn complete all as specified and as directed. Cat No. FUS-29037 of make Jaquar ‘Fusion ' series or of equivalent make as per Appx 'A' as approved by GE.

S&F in replacement angle stop valve with flange quarter turn chromium plated cast copper alloy ISI marked, high pressure screwed down complete all as specified. Make: Jaquar Cat Part No FUS- 29053 FUSION SERIES or of equivalent make as per Appx 'A' as approved by GE.

Supply and fix in repairs brass chromium plated swan neck, wall mounted single lever sink mixer with swinging spout on upper side with connecting legs and wall flange Cat No. FUS-29165 of make Jaquar ‘FUSION' Series or equivalent of makes as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix in repairs for brass chromium plated, overhead shower 150mmX150mm Square Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System, (without arm) complete all as specified and as directed. Cat No.OHS-35495 of make Jaquar or equivalent of makes as per Appx 'A' as approved by GE

Supply and fix in repair cast copper alloy chromium plated Shower Arm casted 190mm long light body round shape for wall mounted showers with flange complete all as specified and as drected. Make: Jaquar Cat No. SHA-477 or equivalent of Prayag or make as per Appx 'A' as approved by GE.

Supply and fix in repair stop valves for 15mm bore pipe, fancy type, chromium plated, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs brass chromium plated quarter turn two way bib cock with wall flange 15mm dia Cat No. FUS-29041 of make Jaquar ‘FUSION series or equivalent as per Appx 'A' as approved by GE complete all as specified and as directed.

Supply and fix in repair for hand shower, chromium plated (health faucet) with 8mm dia, 1.0 metres long flexible tube and wall hook all as per Cat No. ALD-573 of make Jaquar ' ALLIED' or equivalent as approved by GE with chromium plated angular cock 15mm bore with stud complete all as specified and as directed.

S&F in repairs chromium plated toilet roll holder ,Cat No. ACN-1151N of make Jaquar '‘Continental Series' or equivalent of CERA, Prayag and make as per Appx 'A' as approved by GE. all as specified and as directed.

Supply and fix in repairs for brass chromium plated soap dish holder Cat No.ACN-1131N of make Jaquar 'Contonental series' or equivalent of make as per Appx 'A' as approved by GE complete all as specified and as directed.

S&F in repairs brass chromium plated towel ring round with round flange, Cat No. ACN-1121BN of make Jaquar ‘Continental Series' or equivalent of CERA, Prayag and make as per Appx 'A' as approved by GE all as specified and as directed.

Supply and fix in repair for 20mm bore dia gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe, ISI marked complete all as specified and as directed.

Supply and fix for 20mm bore ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.

Supply and fix in repair for 15mm size PVC connection 450mm long including PTMT check nuts etc complete all as specified and as directed. Make: Prayag Cat No. 323-Z or equivqlent as per Appx 'A' as approved by GE

Supply and fix for stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110mm bore pipe complete all as specified and as directed.

Supply and fix for stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm bore pipe complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

Supply and fix in reapir for PVC (SWR) pipe 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 110mm bore complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 75mm bore complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) bends any radius of 75mm bore with access door complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) branch piece, single Y, equal or unequal with access door for 110mm bore pipe complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) junction single, (single T) equal or unequal for 110 mm bore pipes complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) junction single, (single T) equal or unequal for 75mm bore pipes with access door complete all as specified and as directed.

Supply and fix for PVC (SWR) vent cowl for 110 mm bore pipe complete all as specified and as directed.

Supply and fix in repair for PVC (SWR) floor trap 75 mm dia of outlet, plain with CP grating including jointing with solvent cement fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

Material and labour for 150mm bore RCC pipes, class NP2 laid and jointed with collars and tested complete all as specified and as directed.

Supply and fix in repairs for vitreous china, squatting pan, 'Orissa' pattern, size 580 mm x 440 mm, white, with PVC 'P' of 'S' trap, front or back inlet and foot rests any pattern, including making good to floor and PVC high level flushing cistern 10 litres capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets including 32mm dia PVC flush pipe and all necessary fittings, connections for inlet, outlet, anti-syphonage pipes, etc. complete all as specified and as directed.

Supply and fix in repairs for vitreous china, squatting pan, 'Orissa' pattern, size 580 mm x 440 mm x 300mm, white, with PVC 'P' of 'S' trap, front or back inlet and foot rests any pattern, including making good to floor and all connections for inlet, outlet, anti-syphonage pipes, etc. complete all as specified and as directed. Make Parryware cat No. C0117 or equivalent of make as per Appx 'A' as approved by GE.

Supply and fix in repair for vitreous china European type wash down water closet pan, (Pedestal pattern) white with P or S trap including plastic water closet white closed pattern with flat bottom and cover with mild steel chromium plated hinging device and fixing bolts, necessary inlet and outlet connections including PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets, PVC jet, PVC connection 450/600mm long with PTMT nuts and PVC flush pipe 32mm dia including making good complete all as specified and as directed.

Supply and fix in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, 32mm dia PVC flush pipe and connections to pipes, making good the disturbed surfaces complete all as specified and as directed.

Supply and fix for vitreous chinaware wash hand basin, white, flat back, size 550x400 mm including pillar tap, fancy type , cast copper alloy, with capstan heads, chromium plated, cast copper alloy, screwed down high pressure, with or without lettered 'Hot' or 'Cold' and fly nuts screwed for iron pipe for 15mm bore, waste coupling of PTMT (half or full threaded) (minimum weight 45gms) for 32mm bore dia discharge pipe and PVC waste pipe 32 mm dia of required length and all necessary inlet outlet connections complete all as specified and as directed.

Supply and fix for stainless steel sink made of Stainless Steel, 1mm thick with drainage board made of 1mm thick sheet, with plug, washers and waste coupling, 32mm dia. waste pipe, CP grating including bedding in cement mortar to dwarf wall or cast iron cantilever brackets and connecting union to pipe, over all size 915 mm x 460 mm with bowl size 410mm X 330mm X 160mm all as specified and directed.

Supply and fix in reapir for PVC cabinet with looking mirror, single shutter of size 450mm X 350mm complete all as specified and as directed. Make: Prayag Cat No. 557 or equivalent of Neelkamal or as approved by GE.

Demolition of brick work/ precast concrete block walling/ boulder masonary, built in cement mortar or cement lime mortar including all quoins, pillars etc. complete all as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for complete all as directed.

Dismantling structural steel work including doors, gates etc. but excluding framed truss etc. complete all as directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness sheets including Nainital or similar pattern roof coverings/ galvalume/ aluminium sheeting complete all as directed.

Dismantling asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings complete all as directed.

Dismantling of wall/ceiling board/POP ceiling of any description and any thickness including cover fillets/ grid etc complete all as directed.

Demolition and breaking up 150mm internal dia drain pipes (salt glazed earthern ware, AC or reinforced concrete), set in cement mortar complete all as directed and directed.

Supply, laying and testing for LT XLPE UG cable insulated screened PVC bedded galvanised steel strip or wire armoured, heavy duty electric power cables with stranded aluminium conductor 1100 volts grade with cable glands, lugs etc laid in trenches, fixed on wall/ pole including brass cable glands, clamps etc. of size 4 Sqmm 2 core cable complete all as specified and as directed. Note: Excavation and earth work, sand cushioning, brick protection, GI pipe shall be measured and paid separately.

All as per serial item No.171 here-in-before but for 10Sqmm 2 core cable.

Supply and laying 20mm outer dia, double walled corrugated (DWC) HDPE duct pipe conforming to IS- 14930 Pt-II with antirodent and non flame propogating properties of approved colour complete with fittings for cable protection complete all as specified and as directed.

Taking down carefully unserviceable point wiring of any description/ type/ size of light/ fan / tube/ power / two way/ bell etc. on TW batten/ conduit/casing caping including removal of batten/ conduit/ casing caping/ gutties/ wooden boards/ switches/ sockets/ regulators/ holders/ ceiling roses/ call bells/ light fittings etc. for taking credit and making good the disturbed surfaces of wall/ ceiling so as to match with the existing finishes complete all as directed. Note: Taking down of seviceable fittings and fixtures shall be measured and paid separatey.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators, etc. for reuse at site or carrying to the store (To be measured only when found serviceable in all respects complete for reuse) complete all as directed.

Taking down the existing unserviceable main switch/ cut out/ MCB DBs/ sheet metal enclosure of any type/ capacity/ description as existing at site including MCBs any type/ capacity and making good the disturbed surfaces of wall/ ceiling to match with the existing finishes complete all as directed.

Taking down the unserviceable submain wiring of any type/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as directed.

Taking down the existing serviceable light fitting any, keeping with safe custody for refixing the same complete all as directed.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded flexible bright annealed cable 1100 volts grade ISI-694 marked through and including heavy grade, ivory/ white colour, ISI marked, 20 mm dia or higher dia. rigid PVC concealed conduit of including all accessories after chasing in wall/ ceiling etc, with concealed terminal sunken boxes factory made 16 SWG thick pressed steel of suitable size as per site requirement, covered with modular white cover plate with inner frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core flexible cable as earth continuity conductor and connecting to metal bodies of luminaires/ fans etc. for one light point controlled by one, one way switch 5/6 Amps complete all as specified and as directed.

All as per serial item No.179 here-in-before but point wiring for one exhaust fan/ wall fan point controlled by one, one way switch 5/6 Amps and regulator.

All as per serial item No.179 here-in-before but point wiring for one 3 pin 5/6 Amps socket outlet controlled by one switch on same board.

All as per serial item No.179 here-in-before but point wiring for one 3 pin 5/6 Amps socket outlet controlled by one switch on independent board.

All as per serial item No.179 here-in-before but point wiring for one bell point controlled by one bell switch 5 Amps.

All as per serial item No.179 here-in-before but point wiring for one light point controlled by two, two way switchs 5/6 Amps.

All as per serial item No.179 here-in-before but point wiring (for ceiling portion through and including heavy duty ISI marked, PVC casing and capping including all accessories) for one ceiling fan point controlled by one, one way switch 5/6 Amps and regulator.

All as per serial item No.179 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLSH copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board.

All as per serial item No.179 here-in-before but with FRLS copper conductor 4Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLSH copper conductor 4Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board.

Material and labour for point wiring using approved colour coding as per IS, with multistranded FRLS copper conductor 1.5 Sq. mm (nominal area), two single core PVC insulated and unsheathed multistranded flexible bright annealed cable 1100 volts grade ISI-694 marked through and including heavy duty ISI marked, PVC casing caping including all accessories fixed to walls/ ceilings etc., with concealed terminal sunken boxes factory made 16 SWG thick pressed steel of suitable size as per site requirement, covered with modular white cover plate with inner frame suitable for housing modular switches, sockets, regulators etc. including PVC insulated multistranded FRLS copper conductor 1.5 Sqmm (nominal area) single core flexible cable as earth continuity conductor and connecting to metal bodies of luminaires/ fans etc. for one light point controlled by one, one way switch 5/6 Amps complete all as specified and as directed.

All as per serial item No.188 here-in-before but point wiring for one ceiling fan/ exhaust fan point controlled by one, one way switch 5/6 Amps and regulator.

All as per serial item No.188 here-in-before but point wiring for one 3 pin 5/6 Amprs socket outlet controlled by one switch on same board.

All as per serial item No.188 here-in-before but with FRLS copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board.

All as per serial item No.188 here-in-before but with FRLS copper conductor 4Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded cable 1100 Volt grade ISI-694 marked including PVC insulated multistranded FRLSH copper conductor 4Sqmm (nominal area) single core as earth continuity conductor for 3 pin 15/16 Amps socket outlet on independent board.

Supply and fix for lamp holder, PVC body/ polycarbonate type with back plate, brass terminals suitable for batten/ slanting fittings complete all as specified and as directed.

Supply and fix for modular switch, one way 5/6 Amps, 1 module complete all as specified and as directed.

Supply and fix for modular switch, one way, 15/16 Amprs, 1 module complete all as specified and as directed.

Supply and fix for modular switch, two way 5/6 Amps, 1 module complete all as specified and as directed.

Supply and fix for modular bell push, 6Amps, 1 module complete all as specified and as directed.

Suply and fix for bell electric ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

Supply and fix for modular socket outlet multi purpose 2 & 3 pin 5/6 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular socket outlet multipurpose, 3 pin 5/6 Amps and 3 pin 15/16 Amps, combined 2 module complete all as specified and as directed.

Supply and fix for modular step type electronic fan regulator flush type 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

Fixing only for modular step type electronic fan regulator 2 module obtained serviceable from item No. 175 complete all as specified and as directed.

Supply and fix for sheet metal enclosures single pole and neutral with a two pin and earth plug top and socket complete with one MCB DP 20 Amp complete all as specified and as directed.

Supply and fix for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall complete all as specified and as directed.

Supply and fix for sheet metal enclosure MCB DB TPN 4 way with 200 Amps rated bus bar 415 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc and making good of disturbed surface to match with existing colour of wall, connecting complete all as specified and as directed.

Supply and fix for MCB SPN rated capacity 40 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCB SP rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Supply and fix for MCB TPN rated capacity 63Amps, 415Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Refixing only old serviceable MCB SP/ SPN/ TPN of any capacity obtained from Item No 176 here-in-before duly cleaning including necessary electrical connection with proper size of copper wire etc. complete all as specified and directed.

Refixing only old serviceable MCB DB SPN/ TPN of any capacity obtained from Item No 176 here-in-before duly cleaning including necessary electrical connection with proper size of copper wire etc. complete all as specified and directed.

Supply and fix for ceiling rose, 3 terminals, PVC/ polycarbonate type, isolated body including PVC box 3" round type complete all as specified and as directed.

Fixing only for ceiling rose, 3 terminals, PVC/ polycarbonate type, isolated body obtained serviceable from item No. 175 complete all as specified and as directed.

Supply and fix for LED 10 watts batten aluminium extruded with decorative end caps all as per Cat No. BCLSB 10 NW/ WH of make Bajaj, Wipro Cat No. LL20-111-XXX-65-NE, Jaquar Cat No. LGLZ01X010XC or its equivallent model in Havells, Philips as approved complete all as specified and as directed.

Supply and fixing die cast aluminium housing , opal white PC diffuser, With E27 cap, IP 54 rated LED bulk head fitting suitable for 10 Watt LED lamp including lamp complete all as specified and as directed Make- Jaquar Cat No-CWLL01V109XX or equivalent

Supply and fixing ceiling/ wall surface mounted round LED down light with PC housing suitable for 10 Watt LED lamp including lamp complete all as specified & as directed. Make- Jaquar Cat No-LVOL01R010XW or equivalent of Bajaj, Havells, Philips

Supply and fix for wall mounted LED 20watts with lumens out put not less than 2000 lumens, box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc complete with all accessories internally pre wired all as per Cat No. BCLAB 20W of make Bajaj, Cat No. LL20-281-XXX065-ALI of Wipro or equvalent of make Philips/ Havells/ Syska/ Jaguar as approved and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 20watts complete all as specified and as directed.

Supply and fixing 22 Watt LED fitting high quality design PC Batten with decorative end caps complete all as specified and as directed. Make- Jaquar Cat No-LGLZPCX022XW or equivalent

Fixing only serviceable tube light luminaries, obtained from Item ser No 178 here-in-before of any capacity & size, 230Volts including provision of PVC insulated sheathed round flexible wire with multistranded copper conductor of size 0.75 Sqmm , 3 Core 110 Volts grade , from light fittings to ceiling rose complete all as specified and as directed.

S&F ceiling fan (after assembling the same) with fan hook/box, 1200mm sweep BEE 5 star rated, 3 blade ISI marked, white colour, 240 volt AC 50 HZ single phase with hanging rod, conopy set, clamps, bolts nuts and connecting with three core flexible PVC copper conductor cable of size 0.50 sqmm from ceiling rose to fan complete all as specified and directed. Make: Havells Cat No. ES-50 or Bajaj cat No. Kessals 50 ISI of equivalent of Usha, Orient Electric kiara shine, Crompton.

Hanging only ceiling/ exhaust fan and connecting including provision of flexible PVC copper conductor cable of size 23/0.0076 twin core from ceiling rose or connecter to fan including taking down fan complete all as specified and directed.

S&F for wall mounted fan of size 400mm sweep 3 blade, 3 No. speed, 240 volt AC 50 HZ single phase 1320RPM motor speed double string and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose or connecter to fan complete all as specified and directed. Make: Bajaj, Usha, Orient, Crompton, Havells.

Supply and fixing of exhaust fan plastic body of 200mm sweep, AC single phase, 240V heavy duty including louvers and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose to fan including taking down old exhaust fan and depositing to store yard of AGE E/M North Pune complete all as specified and directed. Maqke: Bajaj Cat Part No. Maxma DX 8" or equivalent of Cromptoon, Havells

Supply and install water heater storage type (Geyser) vertical type with copper inner container of capacity 25 litres, electrically operated, AC 230 Volts including 04 Nos of hold fastener nuts of required suitable size fixed in brick wall including PVC connection pipe (copper) chromium plated 8mm dia both ends threaded with brass coupling bolts both side, cone washer, not less than 45cm long suitable for hot/ cold water system complete all as specified and as directed. Make: Havells/Recold/ Bajaj

Supply and Install storage type electric water heater with high precision precalibrated thermostat, safety valve, preset thermal cutout, fire retardant power cord, ultra thick stainless steel inner tank, rust and shock proof ABS outer body non ferrous pressure plate compact and easy to install colour changing indicator , copper heating element of Cap 25 Ltr with rated wattage 2 KW , 230 Volts 50 Hz of Temp range 35º C to 75º C working pressure 0.8 mpa including inlet and outlet connection PVC flexible pipe complete all as specified & as directed

Supply and fixing of exhaust fan metal body of 300mm sweep, 1400 RPM, 01 No. speed set, 220/230V, AC single phase, heavy duty including metallic louvers and shutter and connecting with three core flexible PVC copper conductor cable of size 1.50 sqmm from ceiling rose to fan complete all as specified and directed. Make: Bajaj Bahar or equivalent of Orient, CG

M&L for cutting and making hole into or through cement concrete or stone/ brick masonry wall of thickness upto 45 cm and in girth 45 cm for fixing exhaust fan of size 300mm sweep & providing fasterner grouted in wall four nos inside for fixing of exhaust fan and four nos outside for louvers and redressing the surface and making smooth with cement plaster 1:4 to match existing surface including lime white wash all as specified and as directed.

Disconnecting water and electric connections from existing position of geyser capacity 25/50 Ltr, taking down geysers fixed to walls at any height , cleaning , servicing as directed by Engnr-in- Charge and fixing in existing position complete all as specified and as directed.

Taking down carefully ceiling fan/ exhaust fan of any sweep, keeping with safe custody and refixing the same after cleaning dust, oiling, greasing, servicing etc. with replacement of unserviceable PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal, complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less then 2.25 meter deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected to main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm including 8mm dia TMT bars both ways with one handle for lifting made out of 8mm dia MS bar, funnel, wire mesh, 20 mm bore galvanized steel tubing (medium grade) for watering, filling charcoal or coke and salt in alternate layers, 15mm bore galvanized steel tubing light grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No.3 of SSR Part-I. (Note: GI earth wire and protection pipe upto 7.5metres shall be deemed to be included in quoted rate)

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLSH cable with multistranded copper conductor of size 4.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit and conduit accessories concealed in wall including one run of single core PVC insulated 4.0 Sqmm (nominal area) multistranded FRLSH copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 4.0 Sqmm, one run of 4.0Sqmm conductor and one run of PVC conduit will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit and conduit accessories concealed in wall including one run of single core PVC insulated 6.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 6.0 Sqmm, one run of 6.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with two runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 6.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC casing caping white/ ivory and accessories concealed in wall including one run of single core PVC insulated 6.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Two runs of 6.0 Sqmm, one run of 6.0 Sqmm conductor and one run of PVC casing caping will be measured as one unit)

Material and labour for sub main wiring with approved colour coding as per IS with four runs of single core PVC insulated FRLS cable with multistranded copper conductor of size 10.0 Sq. mm nominal area and drawing through and including non metallic rigid heavy duty PVC conduit and conduit accessories concealed in wall including one run of single core PVC insulated 10.0 Sqmm (nominal area) multistranded FRLS copper conductor as earth wire connected from DB to DB/ main board complete all as specified and as directed. (Note- Four runs of 10.0 Sqmm, one run of 10.0 Sqmm conductor and one run of PVC conduit will be measured as one unit)

Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site.

M/s Akshay Contruction

J P ASSOCIATES

L.T Associate

M/s Asrani and sons

OM INFRA

THE SAIRAM CONSTRUCTIONS

M/S OMSAI ENTERPRISES